arm64: dts: ti: k3-pinctrl: consistently use tabs for alignment

Currently, there's a mix of spaces and tabs used for aligning the
bodies of the macros, even within the same block. Use tabs throughout
for consistency.

No functional change; 'git diff -w' produces no output.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://patch.msgid.link/20260327141513.1250499-2-linux@rasmusvillemoes.dk
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index dc8e03ae74c897fc95d1fe8f0dfb42ae9c00df12..bdccb153e089674a1422f8c1d818c76697e951fb 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -8,15 +8,15 @@
 #ifndef DTS_ARM64_TI_K3_PINCTRL_H
 #define DTS_ARM64_TI_K3_PINCTRL_H
 
-#define WKUP_LVL_EN_SHIFT       (7)
-#define WKUP_LVL_POL_SHIFT      (8)
+#define WKUP_LVL_EN_SHIFT      (7)
+#define WKUP_LVL_POL_SHIFT     (8)
 #define ST_EN_SHIFT            (14)
 #define PULLUDEN_SHIFT         (16)
 #define PULLTYPESEL_SHIFT      (17)
 #define RXACTIVE_SHIFT         (18)
-#define DRV_STR_SHIFT           (19)
-#define ISO_OVERRIDE_EN_SHIFT   (22)
-#define ISO_BYPASS_EN_SHIFT     (23)
+#define DRV_STR_SHIFT          (19)
+#define ISO_OVERRIDE_EN_SHIFT  (22)
+#define ISO_BYPASS_EN_SHIFT    (23)
 #define DEBOUNCE_SHIFT         (11)
 #define FORCE_DS_EN_SHIFT      (15)
 #define DS_EN_SHIFT            (24)
@@ -24,7 +24,7 @@
 #define DS_OUT_VAL_SHIFT       (26)
 #define DS_PULLUD_EN_SHIFT     (27)
 #define DS_PULLTYPE_SEL_SHIFT  (28)
-#define WKUP_EN_SHIFT           (29)
+#define WKUP_EN_SHIFT          (29)
 
 /* Schmitt trigger configuration */
 #define ST_DISABLE             (0 << ST_EN_SHIFT)
@@ -39,28 +39,28 @@
 #define INPUT_EN               (1 << RXACTIVE_SHIFT)
 #define INPUT_DISABLE          (0 << RXACTIVE_SHIFT)
 
-#define DS_PULL_DISABLE         (1 << DS_PULLUD_EN_SHIFT)
-#define DS_PULL_ENABLE          (0 << DS_PULLUD_EN_SHIFT)
+#define DS_PULL_DISABLE                (1 << DS_PULLUD_EN_SHIFT)
+#define DS_PULL_ENABLE         (0 << DS_PULLUD_EN_SHIFT)
 
-#define DS_PULL_UP              (1 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
-#define DS_PULL_DOWN            (0 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+#define DS_PULL_UP             (1 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+#define DS_PULL_DOWN           (0 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
 
-#define DS_STATE_EN             (1 << DS_EN_SHIFT)
-#define DS_STATE_DISABLE        (0 << DS_EN_SHIFT)
+#define DS_STATE_EN            (1 << DS_EN_SHIFT)
+#define DS_STATE_DISABLE       (0 << DS_EN_SHIFT)
 
-#define DS_INPUT_EN             (1 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
-#define DS_INPUT_DISABLE        (0 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+#define DS_INPUT_EN            (1 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+#define DS_INPUT_DISABLE       (0 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
 
-#define DS_OUT_VALUE_ZERO       (0 << DS_OUT_VAL_SHIFT)
-#define DS_OUT_VALUE_ONE        (1 << DS_OUT_VAL_SHIFT)
+#define DS_OUT_VALUE_ZERO      (0 << DS_OUT_VAL_SHIFT)
+#define DS_OUT_VALUE_ONE       (1 << DS_OUT_VAL_SHIFT)
 
 /* Configuration to enable wake-up on pin activity */
-#define WKUP_ENABLE             (1 << WKUP_EN_SHIFT)
-#define WKUP_DISABLE            (0 << WKUP_EN_SHIFT)
-#define WKUP_ON_LEVEL           (1 << WKUP_LVL_EN_SHIFT)
-#define WKUP_ON_EDGE            (0 << WKUP_LVL_EN_SHIFT)
-#define WKUP_LEVEL_LOW          (0 << WKUP_LVL_POL_SHIFT)
-#define WKUP_LEVEL_HIGH         (1 << WKUP_LVL_POL_SHIFT)
+#define WKUP_ENABLE            (1 << WKUP_EN_SHIFT)
+#define WKUP_DISABLE           (0 << WKUP_EN_SHIFT)
+#define WKUP_ON_LEVEL          (1 << WKUP_LVL_EN_SHIFT)
+#define WKUP_ON_EDGE           (0 << WKUP_LVL_EN_SHIFT)
+#define WKUP_LEVEL_LOW         (0 << WKUP_LVL_POL_SHIFT)
+#define WKUP_LEVEL_HIGH                (1 << WKUP_LVL_POL_SHIFT)
 
 /* Only these macros are expected be used directly in device tree files */
 #define PIN_OUTPUT             (INPUT_DISABLE | PULL_DISABLE)
@@ -82,14 +82,14 @@
 #define PIN_DEBOUNCE_CONF5     (5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6     (6 << DEBOUNCE_SHIFT)
 
-#define PIN_DRIVE_STRENGTH_NOMINAL      (0 << DRV_STR_SHIFT)
-#define PIN_DRIVE_STRENGTH_SLOW         (1 << DRV_STR_SHIFT)
-#define PIN_DRIVE_STRENGTH_FAST         (2 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_NOMINAL     (0 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_SLOW                (1 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_FAST                (2 << DRV_STR_SHIFT)
 
 #define PIN_DS_FORCE_DISABLE           (0 << FORCE_DS_EN_SHIFT)
 #define PIN_DS_FORCE_ENABLE            (1 << FORCE_DS_EN_SHIFT)
-#define PIN_DS_ISO_OVERRIDE_DISABLE     (0 << ISO_OVERRIDE_EN_SHIFT)
-#define PIN_DS_ISO_OVERRIDE_ENABLE      (1 << ISO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_DISABLE    (0 << ISO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_ENABLE     (1 << ISO_OVERRIDE_EN_SHIFT)
 #define PIN_DS_OUT_ENABLE              (0 << DS_OUT_DIS_SHIFT)
 #define PIN_DS_OUT_DISABLE             (1 << DS_OUT_DIS_SHIFT)
 #define PIN_DS_OUT_VALUE_ZERO          (0 << DS_OUT_VAL_SHIFT)
@@ -98,18 +98,18 @@
 #define PIN_DS_PULLUD_DISABLE          (1 << DS_PULLUD_EN_SHIFT)
 #define PIN_DS_PULL_DOWN               (0 << DS_PULLTYPE_SEL_SHIFT)
 #define PIN_DS_PULL_UP                 (1 << DS_PULLTYPE_SEL_SHIFT)
-#define PIN_DS_ISO_BYPASS               (1 << ISO_BYPASS_EN_SHIFT)
-#define PIN_DS_ISO_BYPASS_DISABLE       (0 << ISO_BYPASS_EN_SHIFT)
-
-#define PIN_DS_OUTPUT_LOW               (DS_INPUT_DISABLE | DS_OUT_VALUE_ZERO)
-#define PIN_DS_OUTPUT_HIGH              (DS_INPUT_DISABLE | DS_OUT_VALUE_ONE)
-#define PIN_DS_INPUT                    (DS_INPUT_EN | DS_PULL_DISABLE)
-#define PIN_DS_INPUT_PULLUP             (DS_INPUT_EN | DS_PULL_UP)
-#define PIN_DS_INPUT_PULLDOWN           (DS_INPUT_EN | DS_PULL_DOWN)
-
-#define PIN_WKUP_EN_LEVEL_LOW           (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_LOW)
-#define PIN_WKUP_EN_LEVEL_HIGH          (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_HIGH)
-#define PIN_WKUP_EN                     (WKUP_ENABLE | WKUP_ON_EDGE)
+#define PIN_DS_ISO_BYPASS              (1 << ISO_BYPASS_EN_SHIFT)
+#define PIN_DS_ISO_BYPASS_DISABLE      (0 << ISO_BYPASS_EN_SHIFT)
+
+#define PIN_DS_OUTPUT_LOW              (DS_INPUT_DISABLE | DS_OUT_VALUE_ZERO)
+#define PIN_DS_OUTPUT_HIGH             (DS_INPUT_DISABLE | DS_OUT_VALUE_ONE)
+#define PIN_DS_INPUT                   (DS_INPUT_EN | DS_PULL_DISABLE)
+#define PIN_DS_INPUT_PULLUP            (DS_INPUT_EN | DS_PULL_UP)
+#define PIN_DS_INPUT_PULLDOWN          (DS_INPUT_EN | DS_PULL_DOWN)
+
+#define PIN_WKUP_EN_LEVEL_LOW          (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_LOW)
+#define PIN_WKUP_EN_LEVEL_HIGH         (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_HIGH)
+#define PIN_WKUP_EN                    (WKUP_ENABLE | WKUP_ON_EDGE)
 
 /* Default mux configuration for gpio-ranges to use with pinctrl */
 #define PIN_GPIO_RANGE_IOPAD   (PIN_INPUT | 7)