sf: Fix Bank selection calculation for Dual parallel

In Dual parallel connection the bank selection calculation
should be performed using offset and not the calculated address

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 022867eeb70113d3e66071393c77faf99f968a41..88e43ba439a6eb59af16335714c38ca43e75c7e0 100644 (file)
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -259,7 +259,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
 
 int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
 {
-       u32 erase_size, erase_addr;
+       u32 erase_size, erase_addr, bank_addr;
        u8 cmd[SPI_FLASH_CMD_LEN];
        int ret = -1;
 
@@ -272,13 +272,16 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
        cmd[0] = flash->erase_cmd;
        while (len) {
                erase_addr = offset;
+               bank_addr = offset;
 
 #ifdef CONFIG_SF_DUAL_FLASH
                if (flash->dual_flash > SF_SINGLE_FLASH)
                        spi_flash_dual_flash(flash, &erase_addr);
+               if (flash->dual_flash == SF_DUAL_STACKED_FLASH)
+                       bank_addr = erase_addr;
 #endif
 #ifdef CONFIG_SPI_FLASH_BAR
-               ret = spi_flash_bank(flash, erase_addr);
+               ret = spi_flash_bank(flash, bank_addr);
                if (ret < 0)
                        return ret;
 #endif
@@ -304,7 +307,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
                size_t len, const void *buf)
 {
        unsigned long byte_addr, page_size;
-       u32 write_addr;
+       u32 write_addr, bank_addr;
        size_t chunk_len, actual;
        u8 cmd[SPI_FLASH_CMD_LEN];
        int ret = -1;
@@ -314,13 +317,16 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
        cmd[0] = flash->write_cmd;
        for (actual = 0; actual < len; actual += chunk_len) {
                write_addr = offset;
+               bank_addr = offset;
 
 #ifdef CONFIG_SF_DUAL_FLASH
                if (flash->dual_flash > SF_SINGLE_FLASH)
                        spi_flash_dual_flash(flash, &write_addr);
+               if (flash->dual_flash == SF_DUAL_STACKED_FLASH)
+                       bank_addr = write_addr;
 #endif
 #ifdef CONFIG_SPI_FLASH_BAR
-               ret = spi_flash_bank(flash, write_addr);
+               ret = spi_flash_bank(flash, bank_addr);
                if (ret < 0)
                        return ret;
 #endif
@@ -375,7 +381,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
                size_t len, void *data)
 {
        u8 *cmd, cmdsz;
-       u32 remain_len, read_len, read_addr;
+       u32 remain_len, read_len, read_addr, bank_addr;
        int bank_sel = 0;
        int ret = -1;
 
@@ -403,13 +409,16 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
        cmd[0] = flash->read_cmd;
        while (len) {
                read_addr = offset;
+               bank_addr = offset;
 
 #ifdef CONFIG_SF_DUAL_FLASH
                if (flash->dual_flash > SF_SINGLE_FLASH)
                        spi_flash_dual_flash(flash, &read_addr);
+               if (flash->dual_flash == SF_DUAL_STACKED_FLASH)
+                       bank_addr = read_addr;
 #endif
 #ifdef CONFIG_SPI_FLASH_BAR
-               bank_sel = spi_flash_bank(flash, read_addr);
+               bank_sel = spi_flash_bank(flash, bank_addr);
                if (bank_sel < 0)
                        return ret;
 #endif