zynqmp: Fix checkpatch warnings in config file

Cleanup coding style.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index dcca00b707887050f544f2e2e7f07c985a0426ab..857a72c2a63fb5ee8d7a7f3b663ed50c0d7408b7 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -65,7 +65,8 @@
 
 #define CONFIG_CONS_INDEX              0
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 4800, 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE \
+       { 4800, 9600, 19200, 38400, 57600, 115200 }
 
 /* Command line configuration */
 #define CONFIG_CMD_ENV
@@ -106,7 +107,7 @@
 # define CONFIG_CMD_MMC
 #endif
 
-#if defined (CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
+#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
 # define CONFIG_FAT_WRITE
 # define CONFIG_CMD_EXT4_WRITE
 #endif
@@ -115,25 +116,28 @@
 #define CONFIG_SYS_LOAD_ADDR           0x8000000
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS       \
-       "ethaddr=00:0a:35:00:01:22\0"   \
-       "kernel_addr=0x200000\0"        \
-       "initrd_addr=0xa00000\0"        \
-       "initrd_size=0x2000000\0"       \
-       "fdt_addr=0x100000\0"           \
-       "fdt_high=0x10000000\0"         \
-       "veloce=fdt addr f000000 && fdt set /amba/misc_clk clock-frequency <96000> && "\
-       "fdt set /amba_apu/timer clock-frequency <480000> && " \
-       "fdt set /amba/i2c_clk clock-frequency <480000> && " \
-       "booti 80000 - f000000\0"       \
-       "netboot=tftpboot 80000 Image && tftpboot f000000 system.dtb && booti 80000 - f000000\0"        \
-       "qspiboot=sf probe 0 && sf read f000000 100000 40000 && "       \
-                 "sf read 80000 140000 1800000 && booti 80000 - f000000\0"     \
-       "sdboot=mmcinfo && fatload mmc 0:0 f000000 system.dtb && "      \
-               "fatload mmc 0:0 f000000 Image && booti 80000 - f000000\0"      \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "ethaddr=00:0a:35:00:01:22\0" \
+       "kernel_addr=0x200000\0" \
+       "initrd_addr=0xa00000\0" \
+       "initrd_size=0x2000000\0" \
+       "fdt_addr=0x100000\0" \
+       "fdt_high=0x10000000\0" \
+       "veloce=fdt addr f000000 && " \
+               "fdt set /amba/misc_clk clock-frequency <96000> && "\
+               "fdt set /amba_apu/timer clock-frequency <480000> && " \
+               "fdt set /amba/i2c_clk clock-frequency <480000> && " \
+               "booti 80000 - f000000\0" \
+       "netboot=tftpboot 80000 Image && tftpboot f000000 system.dtb && " \
+                "booti 80000 - f000000\0" \
+       "qspiboot=sf probe 0 && sf read f000000 100000 40000 && " \
+                 "sf read 80000 140000 1800000 && booti 80000 - f000000\0" \
+       "sdboot=mmcinfo && fatload mmc 0:0 f000000 system.dtb && " \
+               "fatload mmc 0:0 f000000 Image && booti 80000 - f000000\0" \
        "jtagboot=tftpboot 10000000 image.ub && bootm\0"
 
-#define CONFIG_BOOTARGS                "setenv bootargs console=ttyPS0,${baudrate} earlycon=cdns,mmio,0xff000000,${baudrate}n8"
+#define CONFIG_BOOTARGS                "setenv bootargs console=ttyPS0,${baudrate} " \
+                               "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
 #define CONFIG_PREBOOT         "echo Hello Xilinx ZynqMP; run bootargs"
 #define CONFIG_BOOTCOMMAND     "run $modeboot"
 #define CONFIG_BOOTDELAY       5