config.h.in, configure:

  Rebuild generated files

bk: 380d6b28012yVjdCpBsDXKs-60-YHQ

diff --git a/config.h.in b/config.h.in
index a2e9de3567b9a1f613edd6be9bcb1e85b1732e1e..250aa05bc78c31c175e4d2198c9a1eb26f979cc6 100644 (file)
--- a/config.h.in
+++ b/config.h.in
@@ -326,6 +326,9 @@
 /* do we have the tty_clk line discipline/streams module? */
 #undef TTYCLK
 
+/* What about TTYCLK_AIOCTIMESTAMP? */
+#undef TTYCLK_AIOCTIMESTAMP
+
 /* does the kernel support precision time discipline? */
 #undef KERNEL_PLL
 

diff --git a/configure b/configure
index 208669236c2632299318a931441a0350f676ab19..89141f16446031a2f6dada44a7652279582ec8b5 100755 (executable)
--- a/configure
+++ b/configure
@@ -7391,8 +7391,48 @@ EOF
  ;;
 esac
 
+echo $ac_n "checking for AIOCTIMESTAMPCTL""... $ac_c" 1>&6
+echo "configure:7396: checking for AIOCTIMESTAMPCTL" >&5
+if eval "test \"\${ac_cv_var_aioctimestamp+set}\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 7401 "configure"
+#include "confdefs.h"
+#include <sys/sio.h>
+#ifdef AIOCTIMESTAMPCTL
+ yes
+#endif
+ 
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "yes" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_var_aioctimestamp=yes
+else
+  rm -rf conftest*
+  ac_cv_var_aioctimestamp=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_var_aioctimestamp" 1>&6
+case "$ac_cv_var_aioctimestamp" in
+ yes)
+    cat >> confdefs.h <<\EOF
+#define TTYCLK_AIOCTIMESTAMP 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define TTYCLK 1
+EOF
+
+    ;;
+esac
+
 echo $ac_n "checking for the ppsclock streams module""... $ac_c" 1>&6
-echo "configure:7396: checking for the ppsclock streams module" >&5
+echo "configure:7436: checking for the ppsclock streams module" >&5
 if eval "test \"\${ac_cv_var_ppsclock+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7408,7 +7448,7 @@ EOF
 esac
 
 echo $ac_n "checking for kernel multicast support""... $ac_c" 1>&6
-echo "configure:7412: checking for kernel multicast support" >&5
+echo "configure:7452: checking for kernel multicast support" >&5
 if eval "test \"\${ac_cv_var_mcast+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7416,7 +7456,7 @@ else
   case "$target" in
    i386-sequent-sysv4) ;;
    *) cat > conftest.$ac_ext <<EOF
-#line 7420 "configure"
+#line 7460 "configure"
 #include "confdefs.h"
 #include <netinet/in.h>
 #ifdef IP_ADD_MEMBERSHIP
@@ -7443,7 +7483,7 @@ EOF
 esac
 
 echo $ac_n "checking availability of ntp_{adj,get}time()""... $ac_c" 1>&6
-echo "configure:7447: checking availability of ntp_{adj,get}time()" >&5
+echo "configure:7487: checking availability of ntp_{adj,get}time()" >&5
 if eval "test \"\${ac_cv_var_ntp_syscalls+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7457,7 +7497,7 @@ else
         ac_cv_var_ntp_syscalls=libc
         ;;
       *) cat > conftest.$ac_ext <<EOF
-#line 7461 "configure"
+#line 7501 "configure"
 #include "confdefs.h"
 #include <sys/syscall.h>
 #if defined(SYS_ntp_gettime) && defined(SYS_ntp_adjtime)
@@ -7497,12 +7537,12 @@ EOF
 esac
 
 echo $ac_n "checking if sys/timex.h has STA_FLL""... $ac_c" 1>&6
-echo "configure:7501: checking if sys/timex.h has STA_FLL" >&5
+echo "configure:7541: checking if sys/timex.h has STA_FLL" >&5
 if eval "test \"\${ac_cv_var_sta_fll+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7506 "configure"
+#line 7546 "configure"
 #include "confdefs.h"
 #include <sys/timex.h>
 #ifdef STA_FLL
@@ -7525,7 +7565,7 @@ fi
 echo "$ac_t""$ac_cv_var_sta_fll" 1>&6
 
 echo $ac_n "checking if we have kernel PLL support""... $ac_c" 1>&6
-echo "configure:7529: checking if we have kernel PLL support" >&5
+echo "configure:7569: checking if we have kernel PLL support" >&5
 if eval "test \"\${ac_cv_var_kernel_pll+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7549,7 +7589,7 @@ EOF
 esac
 
 echo $ac_n "checking if SIOCGIFCONF returns buffer size in the buffer""... $ac_c" 1>&6
-echo "configure:7553: checking if SIOCGIFCONF returns buffer size in the buffer" >&5
+echo "configure:7593: checking if SIOCGIFCONF returns buffer size in the buffer" >&5
 if eval "test \"\${ac_cv_var_size_returned_in_buffer+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7578,7 +7618,7 @@ esac
 
 
 echo $ac_n "checking if we want to use MD5 authentication""... $ac_c" 1>&6
-echo "configure:7582: checking if we want to use MD5 authentication" >&5
+echo "configure:7622: checking if we want to use MD5 authentication" >&5
 if eval "test \"\${ac_cv_var_use_md5+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7603,10 +7643,10 @@ esac
 
 # Check for ioctls TIOCGPPSEV
 echo $ac_n "checking ioctl TIOCGPPSEV""... $ac_c" 1>&6
-echo "configure:7607: checking ioctl TIOCGPPSEV" >&5
+echo "configure:7647: checking ioctl TIOCGPPSEV" >&5
 if test "$ac_cv_header_termios_h" = "yes"; then
     cat > conftest.$ac_ext <<EOF
-#line 7610 "configure"
+#line 7650 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef TIOCGPPSEV
@@ -7639,10 +7679,10 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Check for ioctls TIOCSPPS
 echo $ac_n "checking ioctl TIOCSPPS""... $ac_c" 1>&6
-echo "configure:7643: checking ioctl TIOCSPPS" >&5
+echo "configure:7683: checking ioctl TIOCSPPS" >&5
 if test "$ac_cv_header_termios_h" = "yes"; then
     cat > conftest.$ac_ext <<EOF
-#line 7646 "configure"
+#line 7686 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef TIOCSPPS
@@ -7674,10 +7714,10 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Check for ioctls CIOGETEV
 echo $ac_n "checking ioctl CIOGETEV""... $ac_c" 1>&6
-echo "configure:7678: checking ioctl CIOGETEV" >&5
+echo "configure:7718: checking ioctl CIOGETEV" >&5
 if test "$ac_cv_header_sys_ppsclock_h" = "yes"; then
     cat > conftest.$ac_ext <<EOF
-#line 7681 "configure"
+#line 7721 "configure"
 #include "confdefs.h"
 #include <sys/ppsclock.h>
 #ifdef CIOGETEV
@@ -7734,17 +7774,17 @@ esac
 # Check for ioctls TIOCGSERIAL, TIOCSSERIAL, ASYNC_PPS_CD_POS, ASYNC_PPS_CD_NEG
 ac_safe=`echo "linux/serial.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/serial.h""... $ac_c" 1>&6
-echo "configure:7738: checking for linux/serial.h" >&5
+echo "configure:7778: checking for linux/serial.h" >&5
 if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7743 "configure"
+#line 7783 "configure"
 #include "confdefs.h"
 #include <linux/serial.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7748: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7788: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7766,11 +7806,11 @@ else
 fi
 
 echo $ac_n "checking ioctl TIOCGSERIAL""... $ac_c" 1>&6
-echo "configure:7770: checking ioctl TIOCGSERIAL" >&5
+echo "configure:7810: checking ioctl TIOCGSERIAL" >&5
 case "$ac_cv_header_sys_ppsclock_h$ac_cv_header_linux_serial_h" in
   yesyes)
     cat > conftest.$ac_ext <<EOF
-#line 7774 "configure"
+#line 7814 "configure"
 #include "confdefs.h"
 #include <sys/time.h>
 typedef int u_int;
@@ -7817,7 +7857,7 @@ ntp_refclock=no
 
 # HPUX only, and by explicit request
 echo $ac_n "checking Datum/Bancomm bc635/VME interface""... $ac_c" 1>&6
-echo "configure:7821: checking Datum/Bancomm bc635/VME interface" >&5
+echo "configure:7861: checking Datum/Bancomm bc635/VME interface" >&5
 # Check whether --enable-BANCOMM or --disable-BANCOMM was given.
 if test "${enable_BANCOMM+set}" = set; then
   enableval="$enable_BANCOMM"
@@ -7841,7 +7881,7 @@ esac
 
 #HPUX only, and only by explicit request
 echo $ac_n "checking TrueTime GPS receiver/VME interface""... $ac_c" 1>&6
-echo "configure:7845: checking TrueTime GPS receiver/VME interface" >&5
+echo "configure:7885: checking TrueTime GPS receiver/VME interface" >&5
 # Check whether --enable-GPSVME or --disable-GPSVME was given.
 if test "${enable_GPSVME+set}" = set; then
   enableval="$enable_GPSVME"
@@ -7864,7 +7904,7 @@ case "$ntp_ok$target" in
 esac
 
 echo $ac_n "checking for PCL720 clock support""... $ac_c" 1>&6
-echo "configure:7868: checking for PCL720 clock support" >&5
+echo "configure:7908: checking for PCL720 clock support" >&5
 case "$ac_cv_header_machine_inline_h$ac_cv_header_sys_pcl720_h$ac_cv_header_sys_i8253_h" in
  yesyesyes)
     cat >> confdefs.h <<\EOF
@@ -7880,7 +7920,7 @@ esac
 echo "$ac_t""$ans" 1>&6
 
 echo $ac_n "checking for SHM clock attached thru shared memory""... $ac_c" 1>&6
-echo "configure:7884: checking for SHM clock attached thru shared memory" >&5
+echo "configure:7924: checking for SHM clock attached thru shared memory" >&5
 # Check whether --enable-SHM or --disable-SHM was given.
 if test "${enable_SHM+set}" = set; then
   enableval="$enable_SHM"
@@ -7899,7 +7939,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for default inclusion of all suitable non-PARSE clocks""... $ac_c" 1>&6
-echo "configure:7903: checking for default inclusion of all suitable non-PARSE clocks" >&5
+echo "configure:7943: checking for default inclusion of all suitable non-PARSE clocks" >&5
 # Check whether --enable-all-clocks or --disable-all-clocks was given.
 if test "${enable_all_clocks+set}" = set; then
   enableval="$enable_all_clocks"
@@ -7911,7 +7951,7 @@ fi
 echo "$ac_t""$ntp_eac" 1>&6
 
 echo $ac_n "checking if we have support for PARSE clocks""... $ac_c" 1>&6
-echo "configure:7915: checking if we have support for PARSE clocks" >&5
+echo "configure:7955: checking if we have support for PARSE clocks" >&5
 case "$ac_cv_header_termio_h$ac_cv_header_termios_h" in
  *yes*)
     ntp_canparse=yes
@@ -7923,14 +7963,14 @@ echo "$ac_t""$ntp_canparse" 1>&6
 
 # Requires modem control
 echo $ac_n "checking ACTS modem service""... $ac_c" 1>&6
-echo "configure:7927: checking ACTS modem service" >&5
+echo "configure:7967: checking ACTS modem service" >&5
 # Check whether --enable-ACTS or --disable-ACTS was given.
 if test "${enable_ACTS+set}" = set; then
   enableval="$enable_ACTS"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 7934 "configure"
+#line 7974 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -7963,7 +8003,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Arbiter 1088A/B GPS receiver""... $ac_c" 1>&6
-echo "configure:7967: checking Arbiter 1088A/B GPS receiver" >&5
+echo "configure:8007: checking Arbiter 1088A/B GPS receiver" >&5
 # Check whether --enable-ARBITER or --disable-ARBITER was given.
 if test "${enable_ARBITER+set}" = set; then
   enableval="$enable_ARBITER"
@@ -7982,7 +8022,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Arcron MSF receiver""... $ac_c" 1>&6
-echo "configure:7986: checking Arcron MSF receiver" >&5
+echo "configure:8026: checking Arcron MSF receiver" >&5
 # Check whether --enable-ARCRON_MSF or --disable-ARCRON_MSF was given.
 if test "${enable_ARCRON_MSF+set}" = set; then
   enableval="$enable_ARCRON_MSF"
@@ -8001,7 +8041,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Austron 2200A/2201A GPS receiver""... $ac_c" 1>&6
-echo "configure:8005: checking Austron 2200A/2201A GPS receiver" >&5
+echo "configure:8045: checking Austron 2200A/2201A GPS receiver" >&5
 # Check whether --enable-AS2201 or --disable-AS2201 was given.
 if test "${enable_AS2201+set}" = set; then
   enableval="$enable_AS2201"
@@ -8020,7 +8060,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking PPS interface""... $ac_c" 1>&6
-echo "configure:8024: checking PPS interface" >&5
+echo "configure:8064: checking PPS interface" >&5
 # Check whether --enable-ATOM or --disable-ATOM was given.
 if test "${enable_ATOM+set}" = set; then
   enableval="$enable_ATOM"
@@ -8039,7 +8079,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking CHU modem/decoder""... $ac_c" 1>&6
-echo "configure:8043: checking CHU modem/decoder" >&5
+echo "configure:8083: checking CHU modem/decoder" >&5
 # Check whether --enable-CHU or --disable-CHU was given.
 if test "${enable_CHU+set}" = set; then
   enableval="$enable_CHU"
@@ -8059,7 +8099,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 ac_refclock_chu=$ntp_ok
 
 echo $ac_n "checking CHU audio/decoder""... $ac_c" 1>&6
-echo "configure:8063: checking CHU audio/decoder" >&5
+echo "configure:8103: checking CHU audio/decoder" >&5
 # Check whether --enable-AUDIO-CHU or --disable-AUDIO-CHU was given.
 if test "${enable_AUDIO_CHU+set}" = set; then
   enableval="$enable_AUDIO_CHU"
@@ -8083,7 +8123,7 @@ esac
 
 # Not under HP-UX
 echo $ac_n "checking Datum Programmable Time System""... $ac_c" 1>&6
-echo "configure:8087: checking Datum Programmable Time System" >&5
+echo "configure:8127: checking Datum Programmable Time System" >&5
 # Check whether --enable-DATUM or --disable-DATUM was given.
 if test "${enable_DATUM+set}" = set; then
   enableval="$enable_DATUM"
@@ -8109,14 +8149,14 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Requires modem control
 echo $ac_n "checking Heath GC-1000 WWV/WWVH receiver""... $ac_c" 1>&6
-echo "configure:8113: checking Heath GC-1000 WWV/WWVH receiver" >&5
+echo "configure:8153: checking Heath GC-1000 WWV/WWVH receiver" >&5
 # Check whether --enable-HEATH or --disable-HEATH was given.
 if test "${enable_HEATH+set}" = set; then
   enableval="$enable_HEATH"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 8120 "configure"
+#line 8160 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -8149,7 +8189,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking HP 58503A GPS receiver""... $ac_c" 1>&6
-echo "configure:8153: checking HP 58503A GPS receiver" >&5
+echo "configure:8193: checking HP 58503A GPS receiver" >&5
 # Check whether --enable-HPGPS or --disable-HPGPS was given.
 if test "${enable_HPGPS+set}" = set; then
   enableval="$enable_HPGPS"
@@ -8168,7 +8208,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Sun IRIG audio decoder""... $ac_c" 1>&6
-echo "configure:8172: checking Sun IRIG audio decoder" >&5
+echo "configure:8212: checking Sun IRIG audio decoder" >&5
 # Check whether --enable-IRIG or --disable-IRIG was given.
 if test "${enable_IRIG+set}" = set; then
   enableval="$enable_IRIG"
@@ -8196,7 +8236,7 @@ case "$ntp_ok$ac_cv_header_sun_audioio_h$ac_cv_header_sys_audioio_h" in
 esac
 
 echo $ac_n "checking Leitch CSD 5300 Master Clock System Driver""... $ac_c" 1>&6
-echo "configure:8200: checking Leitch CSD 5300 Master Clock System Driver" >&5
+echo "configure:8240: checking Leitch CSD 5300 Master Clock System Driver" >&5
 # Check whether --enable-LEITCH or --disable-LEITCH was given.
 if test "${enable_LEITCH+set}" = set; then
   enableval="$enable_LEITCH"
@@ -8215,7 +8255,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking local clock reference""... $ac_c" 1>&6
-echo "configure:8219: checking local clock reference" >&5
+echo "configure:8259: checking local clock reference" >&5
 # Check whether --enable-LOCAL-CLOCK or --disable-LOCAL-CLOCK was given.
 if test "${enable_LOCAL_CLOCK+set}" = set; then
   enableval="$enable_LOCAL_CLOCK"
@@ -8234,7 +8274,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking EES M201 MSF receiver""... $ac_c" 1>&6
-echo "configure:8238: checking EES M201 MSF receiver" >&5
+echo "configure:8278: checking EES M201 MSF receiver" >&5
 # Check whether --enable-MSFEES or --disable-MSFEES was given.
 if test "${enable_MSFEES+set}" = set; then
   enableval="$enable_MSFEES"
@@ -8254,7 +8294,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Not Ultrix
 echo $ac_n "checking Magnavox MX4200 GPS receiver""... $ac_c" 1>&6
-echo "configure:8258: checking Magnavox MX4200 GPS receiver" >&5
+echo "configure:8298: checking Magnavox MX4200 GPS receiver" >&5
 # Check whether --enable-MX4200 or --disable-MX4200 was given.
 if test "${enable_MX4200+set}" = set; then
   enableval="$enable_MX4200"
@@ -8281,7 +8321,7 @@ case "$ntp_ok$target" in
 esac
 
 echo $ac_n "checking NMEA GPS receiver""... $ac_c" 1>&6
-echo "configure:8285: checking NMEA GPS receiver" >&5
+echo "configure:8325: checking NMEA GPS receiver" >&5
 # Check whether --enable-NMEA or --disable-NMEA was given.
 if test "${enable_NMEA+set}" = set; then
   enableval="$enable_NMEA"
@@ -8300,7 +8340,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for ONCORE Motorola VP/UT Oncore GPS""... $ac_c" 1>&6
-echo "configure:8304: checking for ONCORE Motorola VP/UT Oncore GPS" >&5
+echo "configure:8344: checking for ONCORE Motorola VP/UT Oncore GPS" >&5
 # Check whether --enable-ONCORE or --disable-ONCORE was given.
 if test "${enable_ONCORE+set}" = set; then
   enableval="$enable_ONCORE"
@@ -8322,7 +8362,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for Palisade clock""... $ac_c" 1>&6
-echo "configure:8326: checking for Palisade clock" >&5
+echo "configure:8366: checking for Palisade clock" >&5
 # Check whether --enable-PALISADE or --disable-PALISADE was given.
 if test "${enable_PALISADE+set}" = set; then
   enableval="$enable_PALISADE"
@@ -8348,7 +8388,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking PST/Traconex 1020 WWV/WWVH receiver""... $ac_c" 1>&6
-echo "configure:8352: checking PST/Traconex 1020 WWV/WWVH receiver" >&5
+echo "configure:8392: checking PST/Traconex 1020 WWV/WWVH receiver" >&5
 # Check whether --enable-PST or --disable-PST was given.
 if test "${enable_PST+set}" = set; then
   enableval="$enable_PST"
@@ -8368,7 +8408,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Not Ultrix
 echo $ac_n "checking Rockwell Jupiter GPS receiver""... $ac_c" 1>&6
-echo "configure:8372: checking Rockwell Jupiter GPS receiver" >&5
+echo "configure:8412: checking Rockwell Jupiter GPS receiver" >&5
 # Check whether --enable-JUPITER or --disable-JUPITER was given.
 if test "${enable_JUPITER+set}" = set; then
   enableval="$enable_JUPITER"
@@ -8396,14 +8436,14 @@ esac
 
 # Requires modem control
 echo $ac_n "checking PTB modem service""... $ac_c" 1>&6
-echo "configure:8400: checking PTB modem service" >&5
+echo "configure:8440: checking PTB modem service" >&5
 # Check whether --enable-PTBACTS or --disable-PTBACTS was given.
 if test "${enable_PTBACTS+set}" = set; then
   enableval="$enable_PTBACTS"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 8407 "configure"
+#line 8447 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -8436,7 +8476,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking KSI/Odetics TPRO/S GPS receiver/IRIG interface""... $ac_c" 1>&6
-echo "configure:8440: checking KSI/Odetics TPRO/S GPS receiver/IRIG interface" >&5
+echo "configure:8480: checking KSI/Odetics TPRO/S GPS receiver/IRIG interface" >&5
 # Check whether --enable-TPRO or --disable-TPRO was given.
 if test "${enable_TPRO+set}" = set; then
   enableval="$enable_TPRO"
@@ -8464,7 +8504,7 @@ case "$ntp_ok$ac_cv_header_sys_tpro" in
 esac
 
 echo $ac_n "checking TRAK 8810 GPS receiver""... $ac_c" 1>&6
-echo "configure:8468: checking TRAK 8810 GPS receiver" >&5
+echo "configure:8508: checking TRAK 8810 GPS receiver" >&5
 # Check whether --enable-TRAK or --disable-TRAK was given.
 if test "${enable_TRAK+set}" = set; then
   enableval="$enable_TRAK"
@@ -8483,7 +8523,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Chrono-log K-series WWVB receiver""... $ac_c" 1>&6
-echo "configure:8487: checking Chrono-log K-series WWVB receiver" >&5
+echo "configure:8527: checking Chrono-log K-series WWVB receiver" >&5
 # Check whether --enable-CHRONOLOG or --disable-CHRONOLOG was given.
 if test "${enable_CHRONOLOG+set}" = set; then
   enableval="$enable_CHRONOLOG"
@@ -8502,7 +8542,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Dumb generic hh:mm:ss local clock""... $ac_c" 1>&6
-echo "configure:8506: checking Dumb generic hh:mm:ss local clock" >&5
+echo "configure:8546: checking Dumb generic hh:mm:ss local clock" >&5
 # Check whether --enable-DUMBCLOCK or --disable-DUMBCLOCK was given.
 if test "${enable_DUMBCLOCK+set}" = set; then
   enableval="$enable_DUMBCLOCK"
@@ -8522,7 +8562,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Not on a vax-dec-bsd
 echo $ac_n "checking Kinemetrics/TrueTime receivers""... $ac_c" 1>&6
-echo "configure:8526: checking Kinemetrics/TrueTime receivers" >&5
+echo "configure:8566: checking Kinemetrics/TrueTime receivers" >&5
 # Check whether --enable-TRUETIME or --disable-TRUETIME was given.
 if test "${enable_TRUETIME+set}" = set; then
   enableval="$enable_TRUETIME"
@@ -8551,7 +8591,7 @@ case "$ntp_ok$target" in
 esac
 
 echo $ac_n "checking Spectracom 8170/Netclock/2 WWVB receiver""... $ac_c" 1>&6
-echo "configure:8555: checking Spectracom 8170/Netclock/2 WWVB receiver" >&5
+echo "configure:8595: checking Spectracom 8170/Netclock/2 WWVB receiver" >&5
 # Check whether --enable-WWVB or --disable-WWVB was given.
 if test "${enable_WWVB+set}" = set; then
   enableval="$enable_WWVB"
@@ -8570,7 +8610,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Ultralink M320 WWVB receiver""... $ac_c" 1>&6
-echo "configure:8574: checking Ultralink M320 WWVB receiver" >&5
+echo "configure:8614: checking Ultralink M320 WWVB receiver" >&5
 # Check whether --enable-ULINK or --disable-ULINK was given.
 if test "${enable_ULINK+set}" = set; then
   enableval="$enable_ULINK"
@@ -8590,14 +8630,14 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Requires modem control
 echo $ac_n "checking USNO modem service""... $ac_c" 1>&6
-echo "configure:8594: checking USNO modem service" >&5
+echo "configure:8634: checking USNO modem service" >&5
 # Check whether --enable-USNO or --disable-USNO was given.
 if test "${enable_USNO+set}" = set; then
   enableval="$enable_USNO"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 8601 "configure"
+#line 8641 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -8630,7 +8670,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for default inclusion of all suitable PARSE clocks""... $ac_c" 1>&6
-echo "configure:8634: checking for default inclusion of all suitable PARSE clocks" >&5
+echo "configure:8674: checking for default inclusion of all suitable PARSE clocks" >&5
 # Check whether --enable-parse-clocks or --disable-parse-clocks was given.
 if test "${enable_parse_clocks+set}" = set; then
   enableval="$enable_parse_clocks"
@@ -8660,7 +8700,7 @@ ntp_parseutil=no
 ntp_rawdcf=no
 
 echo $ac_n "checking Diem Computime Radio Clock""... $ac_c" 1>&6
-echo "configure:8664: checking Diem Computime Radio Clock" >&5
+echo "configure:8704: checking Diem Computime Radio Clock" >&5
 # Check whether --enable-COMPUTIME or --disable-COMPUTIME was given.
 if test "${enable_COMPUTIME+set}" = set; then
   enableval="$enable_COMPUTIME"
@@ -8685,7 +8725,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking ELV/DCF7000 clock""... $ac_c" 1>&6
-echo "configure:8689: checking ELV/DCF7000 clock" >&5
+echo "configure:8729: checking ELV/DCF7000 clock" >&5
 # Check whether --enable-DCF7000 or --disable-DCF7000 was given.
 if test "${enable_DCF7000+set}" = set; then
   enableval="$enable_DCF7000"
@@ -8710,7 +8750,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking HOPF 6021 clock""... $ac_c" 1>&6
-echo "configure:8714: checking HOPF 6021 clock" >&5
+echo "configure:8754: checking HOPF 6021 clock" >&5
 # Check whether --enable-HOPF6021 or --disable-HOPF6021 was given.
 if test "${enable_HOPF6021+set}" = set; then
   enableval="$enable_HOPF6021"
@@ -8735,7 +8775,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Meinberg clocks""... $ac_c" 1>&6
-echo "configure:8739: checking Meinberg clocks" >&5
+echo "configure:8779: checking Meinberg clocks" >&5
 # Check whether --enable-MEINBERG or --disable-MEINBERG was given.
 if test "${enable_MEINBERG+set}" = set; then
   enableval="$enable_MEINBERG"
@@ -8760,7 +8800,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking DCF77 raw time code""... $ac_c" 1>&6
-echo "configure:8764: checking DCF77 raw time code" >&5
+echo "configure:8804: checking DCF77 raw time code" >&5
 # Check whether --enable-RAWDCF or --disable-RAWDCF was given.
 if test "${enable_RAWDCF+set}" = set; then
   enableval="$enable_RAWDCF"
@@ -8789,7 +8829,7 @@ esac
 case "$ntp_rawdcf" in
  yes)
     echo $ac_n "checking if we must enable parity for RAWDCF""... $ac_c" 1>&6
-echo "configure:8793: checking if we must enable parity for RAWDCF" >&5
+echo "configure:8833: checking if we must enable parity for RAWDCF" >&5
 if eval "test \"\${ac_cv_var_rawdcf_parity+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8817,7 +8857,7 @@ EOF
 esac
 
 echo $ac_n "checking RCC 8000 clock""... $ac_c" 1>&6
-echo "configure:8821: checking RCC 8000 clock" >&5
+echo "configure:8861: checking RCC 8000 clock" >&5
 # Check whether --enable-RCC8000 or --disable-RCC8000 was given.
 if test "${enable_RCC8000+set}" = set; then
   enableval="$enable_RCC8000"
@@ -8842,7 +8882,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Schmid DCF77 clock""... $ac_c" 1>&6
-echo "configure:8846: checking Schmid DCF77 clock" >&5
+echo "configure:8886: checking Schmid DCF77 clock" >&5
 # Check whether --enable-SCHMID or --disable-SCHMID was given.
 if test "${enable_SCHMID+set}" = set; then
   enableval="$enable_SCHMID"
@@ -8867,7 +8907,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Trimble GPS receiver/TAIP protocol""... $ac_c" 1>&6
-echo "configure:8871: checking Trimble GPS receiver/TAIP protocol" >&5
+echo "configure:8911: checking Trimble GPS receiver/TAIP protocol" >&5
 # Check whether --enable-TRIMTAIP or --disable-TRIMTAIP was given.
 if test "${enable_TRIMTAIP+set}" = set; then
   enableval="$enable_TRIMTAIP"
@@ -8892,7 +8932,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Trimble GPS receiver/TSIP protocol""... $ac_c" 1>&6
-echo "configure:8896: checking Trimble GPS receiver/TSIP protocol" >&5
+echo "configure:8936: checking Trimble GPS receiver/TSIP protocol" >&5
 # Check whether --enable-TRIMTSIP or --disable-TRIMTSIP was given.
 if test "${enable_TRIMTSIP+set}" = set; then
   enableval="$enable_TRIMTSIP"
@@ -8917,7 +8957,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking WHARTON 400A Series clock""... $ac_c" 1>&6
-echo "configure:8921: checking WHARTON 400A Series clock" >&5
+echo "configure:8961: checking WHARTON 400A Series clock" >&5
 # Check whether --enable-WHARTON or --disable-WHARTON was given.
 if test "${enable_WHARTON+set}" = set; then
   enableval="$enable_WHARTON"
@@ -8942,7 +8982,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking VARITEXT clock""... $ac_c" 1>&6
-echo "configure:8946: checking VARITEXT clock" >&5
+echo "configure:8986: checking VARITEXT clock" >&5
 # Check whether --enable-VARITEXT or --disable-VARITEXT was given.
 if test "${enable_VARITEXT+set}" = set; then
   enableval="$enable_VARITEXT"
@@ -8970,7 +9010,7 @@ esac
 
 
 echo $ac_n "checking if we need to make and use the parse libraries""... $ac_c" 1>&6
-echo "configure:8974: checking if we need to make and use the parse libraries" >&5
+echo "configure:9014: checking if we need to make and use the parse libraries" >&5
 ans=no
 case "$ntp_libparse" in
  yes)
@@ -8998,7 +9038,7 @@ echo "$ac_t""$ans" 1>&6
 
 
 echo $ac_n "checking if we need to make and use the RSAREF library""... $ac_c" 1>&6
-echo "configure:9002: checking if we need to make and use the RSAREF library" >&5
+echo "configure:9042: checking if we need to make and use the RSAREF library" >&5
 ans=no
 if test -f $srcdir/rsaref2/source/rsa.c
 then
@@ -9016,7 +9056,7 @@ echo "$ac_t""$ans" 1>&6
 
 
 echo $ac_n "checking if we can make dcf parse utilities""... $ac_c" 1>&6
-echo "configure:9020: checking if we can make dcf parse utilities" >&5
+echo "configure:9060: checking if we can make dcf parse utilities" >&5
 ans=no
 if test "$ntp_parseutil" = "yes"; then
     case "$target" in
@@ -9031,7 +9071,7 @@ echo "$ac_t""$ans" 1>&6
 
 
 echo $ac_n "checking if we can build kernel streams modules for parse""... $ac_c" 1>&6
-echo "configure:9035: checking if we can build kernel streams modules for parse" >&5
+echo "configure:9075: checking if we can build kernel streams modules for parse" >&5
 ans=no
 case "$ntp_parseutil$ac_cv_header_sys_stropts_h" in
  yesyes)
@@ -9058,7 +9098,7 @@ esac
 echo "$ac_t""$ans" 1>&6
 
 echo $ac_n "checking if we need basic refclock support""... $ac_c" 1>&6
-echo "configure:9062: checking if we need basic refclock support" >&5
+echo "configure:9102: checking if we need basic refclock support" >&5
 if test "$ntp_refclock" = "yes"; then
     cat >> confdefs.h <<\EOF
 #define REFCLOCK 1
@@ -9070,7 +9110,7 @@ echo "$ac_t""$ntp_refclock" 1>&6
                        
 
 echo $ac_n "checking if we want HP-UX adjtimed support""... $ac_c" 1>&6
-echo "configure:9074: checking if we want HP-UX adjtimed support" >&5
+echo "configure:9114: checking if we want HP-UX adjtimed support" >&5
 case "$target" in
  *-*-hpux[56789]*)
     ans=yes
@@ -9088,7 +9128,7 @@ fi
 echo "$ac_t""$ans" 1>&6
 
 echo $ac_n "checking if we can read kmem""... $ac_c" 1>&6
-echo "configure:9092: checking if we can read kmem" >&5
+echo "configure:9132: checking if we can read kmem" >&5
 if eval "test \"\${ac_cv_var_can_kmem+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9141,7 +9181,7 @@ EOF
 esac
 
 echo $ac_n "checking if adjtime is accurate""... $ac_c" 1>&6
-echo "configure:9145: checking if adjtime is accurate" >&5
+echo "configure:9185: checking if adjtime is accurate" >&5
 if eval "test \"\${ac_cv_var_adjtime_is_accurate+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9193,7 +9233,7 @@ EOF
 esac
 
 echo $ac_n "checking the name of 'tick' in the kernel""... $ac_c" 1>&6
-echo "configure:9197: checking the name of 'tick' in the kernel" >&5
+echo "configure:9237: checking the name of 'tick' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_tick+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9237,7 +9277,7 @@ EOF
 esac
 #
 echo $ac_n "checking for the units of 'tick'""... $ac_c" 1>&6
-echo "configure:9241: checking for the units of 'tick'" >&5
+echo "configure:9281: checking for the units of 'tick'" >&5
 if eval "test \"\${ac_cv_var_tick_nano+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9261,7 +9301,7 @@ EOF
 esac
 #
 echo $ac_n "checking the name of 'tickadj' in the kernel""... $ac_c" 1>&6
-echo "configure:9265: checking the name of 'tickadj' in the kernel" >&5
+echo "configure:9305: checking the name of 'tickadj' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_tickadj+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9314,7 +9354,7 @@ EOF
 esac
 #
 echo $ac_n "checking for the units of 'tickadj'""... $ac_c" 1>&6
-echo "configure:9318: checking for the units of 'tickadj'" >&5
+echo "configure:9358: checking for the units of 'tickadj'" >&5
 if eval "test \"\${ac_cv_var_tickadj_nano+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9338,7 +9378,7 @@ EOF
 esac
 #
 echo $ac_n "checking half-heartedly for 'dosynctodr' in the kernel""... $ac_c" 1>&6
-echo "configure:9342: checking half-heartedly for 'dosynctodr' in the kernel" >&5
+echo "configure:9382: checking half-heartedly for 'dosynctodr' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_dosynctodr+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9391,7 +9431,7 @@ EOF
 esac
 #
 echo $ac_n "checking half-heartedly for 'noprintf' in the kernel""... $ac_c" 1>&6
-echo "configure:9395: checking half-heartedly for 'noprintf' in the kernel" >&5
+echo "configure:9435: checking half-heartedly for 'noprintf' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_noprintf+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9441,7 +9481,7 @@ esac
 
 
 echo $ac_n "checking for a default value for 'tick'""... $ac_c" 1>&6
-echo "configure:9445: checking for a default value for 'tick'" >&5
+echo "configure:9485: checking for a default value for 'tick'" >&5
 if eval "test \"\${ac_cv_var_tick+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9485,7 +9525,7 @@ EOF
 esac
 
 echo $ac_n "checking for a default value for 'tickadj'""... $ac_c" 1>&6
-echo "configure:9489: checking for a default value for 'tickadj'" >&5
+echo "configure:9529: checking for a default value for 'tickadj'" >&5
 if eval "test \"\${ac_cv_var_tickadj+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9611,7 +9651,7 @@ esac
 
 
 echo $ac_n "checking if we want and can make the tickadj utility""... $ac_c" 1>&6
-echo "configure:9615: checking if we want and can make the tickadj utility" >&5
+echo "configure:9655: checking if we want and can make the tickadj utility" >&5
 if eval "test \"\${ac_cv_make_tickadj+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9627,7 +9667,7 @@ esac
 
 
 echo $ac_n "checking if we want and can make the ntptime utility""... $ac_c" 1>&6
-echo "configure:9631: checking if we want and can make the ntptime utility" >&5
+echo "configure:9671: checking if we want and can make the ntptime utility" >&5
 if eval "test \"\${ac_cv_make_ntptime+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9656,7 +9696,7 @@ case "$ac_cv_make_ntptime" in
 esac
 
 echo $ac_n "checking if we want UDP wildcard delivery""... $ac_c" 1>&6
-echo "configure:9660: checking if we want UDP wildcard delivery" >&5
+echo "configure:9700: checking if we want UDP wildcard delivery" >&5
 if eval "test \"\${ac_cv_var_udp_wildcard_delivery+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9735,7 +9775,7 @@ case "$host" in
 esac
 
 echo $ac_n "checking if we should always slew the time""... $ac_c" 1>&6
-echo "configure:9739: checking if we should always slew the time" >&5
+echo "configure:9779: checking if we should always slew the time" >&5
 if eval "test \"\${ac_cv_var_slew_always+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9775,7 +9815,7 @@ EOF
 esac
 
 echo $ac_n "checking if we should step and slew the time""... $ac_c" 1>&6
-echo "configure:9779: checking if we should step and slew the time" >&5
+echo "configure:9819: checking if we should step and slew the time" >&5
 if eval "test \"\${ac_cv_var_step_slew+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9818,7 +9858,7 @@ EOF
 esac
 
 echo $ac_n "checking if ntpdate should step the time""... $ac_c" 1>&6
-echo "configure:9822: checking if ntpdate should step the time" >&5
+echo "configure:9862: checking if ntpdate should step the time" >&5
 if eval "test \"\${ac_cv_var_ntpdate_step+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9849,7 +9889,7 @@ EOF
 esac
 
 echo $ac_n "checking if we should sync TODR clock every hour""... $ac_c" 1>&6
-echo "configure:9853: checking if we should sync TODR clock every hour" >&5
+echo "configure:9893: checking if we should sync TODR clock every hour" >&5
 if eval "test \"\${ac_cv_var_sync_todr+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9882,7 +9922,7 @@ EOF
 esac
 
 echo $ac_n "checking if we should avoid kernel FLL bug""... $ac_c" 1>&6
-echo "configure:9886: checking if we should avoid kernel FLL bug" >&5
+echo "configure:9926: checking if we should avoid kernel FLL bug" >&5
 if eval "test \"\${ac_cv_var_kernel_fll_bug+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else