}
-void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
- const struct wpa_ssid *ssid,
- struct hostapd_freq_params *freq)
+static struct wpa_bss * ibss_find_existing_bss(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid)
{
- int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
- enum hostapd_hw_mode hw_mode;
- struct hostapd_hw_modes *mode = NULL;
- int ht40plus[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
- 184, 192 };
- int bw80[] = { 5180, 5260, 5500, 5580, 5660, 5745, 5955,
- 6035, 6115, 6195, 6275, 6355, 6435, 6515,
- 6595, 6675, 6755, 6835, 6915, 6995 };
- int bw160[] = { 5955, 6115, 6275, 6435, 6595, 6755, 6915 };
- struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
- u8 channel;
- int i, chan_idx, ht40 = -1, res, obss_scan = 1;
- unsigned int j, k;
- struct hostapd_freq_params vht_freq;
- int chwidth, seg0, seg1;
- u32 vht_caps = 0;
- bool is_24ghz, is_6ghz;
-
- freq->freq = ssid->frequency;
+ unsigned int j;
for (j = 0; j < wpa_s->last_scan_res_used; j++) {
struct wpa_bss *bss = wpa_s->last_scan_res[j];
- if (ssid->mode != WPAS_MODE_IBSS)
- break;
-
- /* Don't adjust control freq in case of fixed_freq */
- if (ssid->fixed_freq)
- break;
-
if (!bss_is_ibss(bss))
continue;
if (ssid->ssid_len == bss->ssid_len &&
- os_memcmp(ssid->ssid, bss->ssid, bss->ssid_len) == 0) {
- wpa_printf(MSG_DEBUG,
- "IBSS already found in scan results, adjust control freq: %d",
- bss->freq);
- freq->freq = bss->freq;
- obss_scan = 0;
- break;
- }
+ os_memcmp(ssid->ssid, bss->ssid, bss->ssid_len) == 0)
+ return bss;
}
+ return NULL;
+}
+
+static bool ibss_mesh_can_use_ht(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ struct hostapd_hw_modes *mode)
+{
/* For IBSS check HT_IBSS flag */
if (ssid->mode == WPAS_MODE_IBSS &&
!(wpa_s->drv_flags & WPA_DRIVER_FLAGS_HT_IBSS))
- return;
+ return false;
if (wpa_s->group_cipher == WPA_CIPHER_WEP40 ||
wpa_s->group_cipher == WPA_CIPHER_WEP104 ||
wpa_s->pairwise_cipher == WPA_CIPHER_TKIP) {
wpa_printf(MSG_DEBUG,
"IBSS: WEP/TKIP detected, do not try to enable HT");
- return;
+ return false;
}
- hw_mode = ieee80211_freq_to_chan(freq->freq, &channel);
- for (i = 0; wpa_s->hw.modes && i < wpa_s->hw.num_modes; i++) {
- if (wpa_s->hw.modes[i].mode == hw_mode) {
- mode = &wpa_s->hw.modes[i];
- break;
- }
- }
+ if (!ht_supported(mode))
+ return false;
- if (!mode)
- return;
+#ifdef CONFIG_HT_OVERRIDES
+ if (ssid->disable_ht)
+ return false;
+#endif /* CONFIG_HT_OVERRIDES */
- freq->channel = channel;
+ return true;
+}
- is_24ghz = hw_mode == HOSTAPD_MODE_IEEE80211G ||
- hw_mode == HOSTAPD_MODE_IEEE80211B;
- /* HT/VHT and corresponding overrides are not applicable to 6 GHz.
- * However, HE is mandatory for 6 GHz.
- */
- is_6ghz = is_6ghz_freq(freq->freq);
- if (is_6ghz)
- goto skip_to_6ghz;
+static bool ibss_mesh_can_use_vht(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ struct hostapd_hw_modes *mode)
+{
+ if (mode->mode != HOSTAPD_MODE_IEEE80211A)
+ return false;
-#ifdef CONFIG_HT_OVERRIDES
- if (ssid->disable_ht) {
- freq->ht_enabled = 0;
- return;
- }
-#endif /* CONFIG_HT_OVERRIDES */
+ if (!drv_supports_vht(wpa_s, ssid))
+ return false;
- freq->ht_enabled = ht_supported(mode);
- if (!freq->ht_enabled)
- return;
+ /* For IBSS check VHT_IBSS flag */
+ if (ssid->mode == WPAS_MODE_IBSS &&
+ !(wpa_s->drv_flags & WPA_DRIVER_FLAGS_VHT_IBSS))
+ return false;
+
+ if (!vht_supported(mode))
+ return false;
+
+#ifdef CONFIG_VHT_OVERRIDES
+ if (ssid->disable_vht)
+ return false;
+#endif /* CONFIG_VHT_OVERRIDES */
+
+ return true;
+}
- /* Allow HE on 2.4 GHz without VHT: see nl80211_put_freq_params() */
- if (is_24ghz)
- freq->he_enabled = mode->he_capab[ieee80211_mode].he_supported;
+
+static bool ibss_mesh_can_use_he(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ const struct hostapd_hw_modes *mode,
+ int ieee80211_mode)
+{
#ifdef CONFIG_HE_OVERRIDES
- if (is_24ghz && ssid->disable_he)
- freq->he_enabled = 0;
+ if (ssid->disable_he)
+ return false;
#endif /* CONFIG_HE_OVERRIDES */
- /* Setup higher BW only for 5 GHz */
- if (mode->mode != HOSTAPD_MODE_IEEE80211A)
+ switch (mode->mode) {
+ case HOSTAPD_MODE_IEEE80211G:
+ case HOSTAPD_MODE_IEEE80211B:
+ case HOSTAPD_MODE_IEEE80211A:
+ return mode->he_capab[ieee80211_mode].he_supported;
+ default:
+ return false;
+ }
+}
+
+
+static void ibss_mesh_select_40mhz(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ struct hostapd_hw_modes *mode,
+ struct hostapd_freq_params *freq,
+ int obss_scan) {
+ int chan_idx;
+ struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
+ int i, res;
+ unsigned int j;
+ int ht40plus[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
+ 184, 192 };
+ int ht40 = -1;
+
+ if (!freq->ht_enabled)
return;
for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) {
pri_chan = &mode->channels[chan_idx];
- if (pri_chan->chan == channel)
+ if (pri_chan->chan == freq->channel)
break;
pri_chan = NULL;
}
if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
return;
- freq->channel = pri_chan->chan;
-
#ifdef CONFIG_HT_OVERRIDES
- if (ssid->disable_ht40) {
-#ifdef CONFIG_VHT_OVERRIDES
- if (ssid->disable_vht)
- return;
-#endif /* CONFIG_VHT_OVERRIDES */
- goto skip_ht40;
- }
-#endif /* CONFIG_HT_OVERRIDES */
+ if (ssid->disable_ht40)
+ return;
+#endif
/* Check/setup HT40+/HT40- */
for (j = 0; j < ARRAY_SIZE(ht40plus); j++) {
- if (ht40plus[j] == channel) {
+ if (ht40plus[j] == freq->channel) {
ht40 = 1;
break;
}
/* Find secondary channel */
for (i = 0; i < mode->num_channels; i++) {
sec_chan = &mode->channels[i];
- if (sec_chan->chan == channel + ht40 * 4)
+ if (sec_chan->chan == freq->channel + ht40 * 4)
break;
sec_chan = NULL;
}
wpa_scan_results_free(scan_res);
}
-#ifdef CONFIG_HT_OVERRIDES
-skip_ht40:
-#endif /* CONFIG_HT_OVERRIDES */
wpa_printf(MSG_DEBUG,
"IBSS/mesh: setup freq channel %d, sec_channel_offset %d",
freq->channel, freq->sec_channel_offset);
+}
- if (!drv_supports_vht(wpa_s, ssid))
- return;
-
- /* For IBSS check VHT_IBSS flag */
- if (ssid->mode == WPAS_MODE_IBSS &&
- !(wpa_s->drv_flags & WPA_DRIVER_FLAGS_VHT_IBSS))
- return;
-#ifdef CONFIG_VHT_OVERRIDES
- if (ssid->disable_vht) {
- freq->vht_enabled = 0;
- return;
- }
-#endif /* CONFIG_VHT_OVERRIDES */
+static bool ibss_mesh_select_80_160mhz(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ struct hostapd_hw_modes *mode,
+ struct hostapd_freq_params *freq,
+ int ieee80211_mode, bool is_6ghz) {
+ int bw80[] = { 5180, 5260, 5500, 5580, 5660, 5745, 5955,
+ 6035, 6115, 6195, 6275, 6355, 6435, 6515,
+ 6595, 6675, 6755, 6835, 6915, 6995 };
+ int bw160[] = { 5955, 6115, 6275, 6435, 6595, 6755, 6915 };
+ struct hostapd_freq_params vht_freq;
+ int i;
+ unsigned int j, k;
+ int chwidth, seg0, seg1;
+ u32 vht_caps = 0;
+ u8 channel = freq->channel;
-skip_to_6ghz:
vht_freq = *freq;
/* 6 GHz does not have VHT enabled, so allow that exception here. */
- vht_freq.vht_enabled = vht_supported(mode);
+ if (!freq->he_enabled && is_6ghz)
+ return false;
if (!vht_freq.vht_enabled && !is_6ghz)
- return;
-
- /* Enable HE with VHT for 5 GHz */
- freq->he_enabled = mode->he_capab[ieee80211_mode].he_supported;
+ return false;
/* setup center_freq1, bandwidth */
for (j = 0; j < ARRAY_SIZE(bw80); j++) {
if (j == ARRAY_SIZE(bw80) ||
ieee80211_freq_to_chan(bw80[j], &channel) == NUM_HOSTAPD_MODES)
- return;
+ return false;
/* Back to HT configuration if channel not usable */
if (!ibss_mesh_is_80mhz_avail(channel, mode))
- return;
+ return false;
chwidth = CONF_OPER_CHWIDTH_80MHZ;
seg0 = channel + 6;
* of 160 MHz bandwidth.
*/
if (!ibss_mesh_is_80mhz_avail(channel + 16, mode))
- return;
+ return false;
for (j = 0; j < ARRAY_SIZE(bw160); j++) {
if (freq->freq == bw160[j]) {
if (ieee80211_freq_to_chan(bw80[k], &channel) ==
NUM_HOSTAPD_MODES)
- return;
+ return false;
for (i = channel; i < channel + 16; i += 4) {
struct hostapd_channel_data *chan;
#endif /* CONFIG_HT_OVERRIDES */
}
-#ifdef CONFIG_HE_OVERRIDES
- if (ssid->disable_he) {
- vht_freq.he_enabled = 0;
- freq->he_enabled = 0;
- }
-#endif /* CONFIG_HE_OVERRIDES */
if (hostapd_set_freq_params(&vht_freq, mode->mode, freq->freq,
freq->channel, ssid->enable_edmg,
ssid->edmg_channel, freq->ht_enabled,
chwidth, seg0, seg1, vht_caps,
&mode->he_capab[ieee80211_mode],
NULL) != 0)
- return;
+ return false;
*freq = vht_freq;
wpa_printf(MSG_DEBUG, "IBSS: VHT setup freq cf1 %d, cf2 %d, bw %d",
freq->center_freq1, freq->center_freq2, freq->bandwidth);
+ return true;
+}
+
+
+void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ struct hostapd_freq_params *freq)
+{
+ int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
+ enum hostapd_hw_mode hw_mode;
+ struct hostapd_hw_modes *mode = NULL;
+ int i, obss_scan = 1;
+ u8 channel;
+ bool is_6ghz;
+
+ freq->freq = ssid->frequency;
+
+ if (ssid->mode == WPAS_MODE_IBSS && !ssid->fixed_freq) {
+ struct wpa_bss *bss = ibss_find_existing_bss(wpa_s, ssid);
+
+ if (bss) {
+ wpa_printf(MSG_DEBUG,
+ "IBSS already found in scan results, adjust control freq: %d",
+ bss->freq);
+ freq->freq = bss->freq;
+ obss_scan = 0;
+ }
+ }
+
+ hw_mode = ieee80211_freq_to_chan(freq->freq, &channel);
+ for (i = 0; wpa_s->hw.modes && i < wpa_s->hw.num_modes; i++) {
+ if (wpa_s->hw.modes[i].mode == hw_mode) {
+ mode = &wpa_s->hw.modes[i];
+ break;
+ }
+ }
+
+ if (!mode)
+ return;
+
+ is_6ghz = is_6ghz_freq(freq->freq);
+
+ freq->ht_enabled = 0;
+ freq->vht_enabled = 0;
+ freq->he_enabled = 0;
+
+ if (!is_6ghz)
+ freq->ht_enabled = ibss_mesh_can_use_ht(wpa_s, ssid, mode);
+ if (freq->ht_enabled)
+ freq->vht_enabled = ibss_mesh_can_use_vht(wpa_s, ssid, mode);
+ if (freq->vht_enabled || is_6ghz)
+ freq->he_enabled = ibss_mesh_can_use_he(wpa_s, ssid, mode,
+ ieee80211_mode);
+ freq->channel = channel;
+ /* Setup higher BW only for 5 GHz */
+ if (mode->mode == HOSTAPD_MODE_IEEE80211A) {
+ ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan);
+ if (!ibss_mesh_select_80_160mhz(wpa_s, ssid, mode, freq,
+ ieee80211_mode, is_6ghz))
+ freq->vht_enabled = false;
+ }
}
projects / thirdparty / hostap.git / commitdiff
