irqchip-or1k-pic-undefine-mask_ack-for-level-trigger.patch
x86-clear-.brk-area-at-early-boot.patch
signal-handling-don-t-use-bug_on-for-debugging.patch
+usb-serial-ftdi_sio-add-belimo-device-ids.patch
+usb-dwc3-gadget-fix-event-pending-check.patch
+tty-serial-samsung_tty-set-dma-burst_size-to-1.patch
--- /dev/null
+From f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 Mon Sep 17 00:00:00 2001
+From: Chanho Park <chanho61.park@samsung.com>
+Date: Mon, 27 Jun 2022 15:51:13 +0900
+Subject: tty: serial: samsung_tty: set dma burst_size to 1
+
+From: Chanho Park <chanho61.park@samsung.com>
+
+commit f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 upstream.
+
+The src_maxburst and dst_maxburst have been changed to 1 but the settings
+of the UCON register aren't changed yet. They should be changed as well
+according to the dmaengine slave config.
+
+Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions")
+Cc: stable <stable@kernel.org>
+Cc: Marek Szyprowski <m.szyprowski@samsung.com>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Chanho Park <chanho61.park@samsung.com>
+Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/samsung.c | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+--- a/drivers/tty/serial/samsung.c
++++ b/drivers/tty/serial/samsung.c
+@@ -241,8 +241,7 @@ static void enable_tx_dma(struct s3c24xx
+ /* Enable tx dma mode */
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
+- ucon |= (dma_get_cache_alignment() >= 16) ?
+- S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
++ ucon |= S3C64XX_UCON_TXBURST_1;
+ ucon |= S3C64XX_UCON_TXMODE_DMA;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+@@ -515,7 +514,7 @@ static void enable_rx_dma(struct s3c24xx
+ S3C64XX_UCON_DMASUS_EN |
+ S3C64XX_UCON_TIMEOUT_EN |
+ S3C64XX_UCON_RXMODE_MASK);
+- ucon |= S3C64XX_UCON_RXBURST_16 |
++ ucon |= S3C64XX_UCON_RXBURST_1 |
+ 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
+ S3C64XX_UCON_EMPTYINT_EN |
+ S3C64XX_UCON_TIMEOUT_EN |
--- /dev/null
+From 7441b273388b9a59d8387a03ffbbca9d5af6348c Mon Sep 17 00:00:00 2001
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Date: Mon, 27 Jun 2022 18:41:19 -0700
+Subject: usb: dwc3: gadget: Fix event pending check
+
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+
+commit 7441b273388b9a59d8387a03ffbbca9d5af6348c upstream.
+
+The DWC3_EVENT_PENDING flag is used to protect against invalid call to
+top-half interrupt handler, which can occur when there's a delay in
+software detection of the interrupt line deassertion.
+
+However, the clearing of this flag was done prior to unmasking the
+interrupt line, creating opportunity where the top-half handler can
+come. This breaks the serialization and creates a race between the
+top-half and bottom-half handler, resulting in losing synchronization
+between the controller and the driver when processing events.
+
+To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at
+the end of the bottom-half handler.
+
+Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache")
+Cc: stable@vger.kernel.org
+Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc3/gadget.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -3130,7 +3130,6 @@ static irqreturn_t dwc3_process_event_bu
+ }
+
+ evt->count = 0;
+- evt->flags &= ~DWC3_EVENT_PENDING;
+ ret = IRQ_HANDLED;
+
+ /* Unmask interrupt */
+@@ -3143,6 +3142,9 @@ static irqreturn_t dwc3_process_event_bu
+ dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
+ }
+
++ /* Keep the clearing of DWC3_EVENT_PENDING at the end */
++ evt->flags &= ~DWC3_EVENT_PENDING;
++
+ return ret;
+ }
+
--- /dev/null
+From 7c239a071d1f04b7137789810807b4108d475c72 Mon Sep 17 00:00:00 2001
+From: Lucien Buchmann <lucien.buchmann@gmx.net>
+Date: Sat, 25 Jun 2022 02:17:44 +0200
+Subject: USB: serial: ftdi_sio: add Belimo device ids
+
+From: Lucien Buchmann <lucien.buchmann@gmx.net>
+
+commit 7c239a071d1f04b7137789810807b4108d475c72 upstream.
+
+Those two product ids are known.
+
+Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/ftdi_sio.c | 3 +++
+ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
+ 2 files changed, 9 insertions(+)
+
+--- a/drivers/usb/serial/ftdi_sio.c
++++ b/drivers/usb/serial/ftdi_sio.c
+@@ -1018,6 +1018,9 @@ static const struct usb_device_id id_tab
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
++ /* Belimo Automation devices */
++ { USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) },
++ { USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) },
+ /* ICP DAS I-756xU devices */
+ { USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
+ { USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
+--- a/drivers/usb/serial/ftdi_sio_ids.h
++++ b/drivers/usb/serial/ftdi_sio_ids.h
+@@ -1569,6 +1569,12 @@
+ #define CHETCO_SEASMART_ANALOG_PID 0xA5AF /* SeaSmart Analog Adapter */
+
+ /*
++ * Belimo Automation
++ */
++#define BELIMO_ZTH_PID 0x8050
++#define BELIMO_ZIP_PID 0xC811
++
++/*
+ * Unjo AB
+ */
+ #define UNJO_VID 0x22B7
projects / thirdparty / kernel / stable-queue.git / commitdiff
