IEEE80211_HE_MAC_CAP2_ACK_EN);
}
-static void iwl_mld_set_he_support(struct iwl_mld *mld,
- struct ieee80211_vif *vif,
- struct iwl_mac_config_cmd *cmd)
+struct iwl_mld_mac_wifi_gen_sta_iter_data {
+ struct ieee80211_vif *vif;
+ struct iwl_mac_wifi_gen_support *support;
+};
+
+static void iwl_mld_mac_wifi_gen_sta_iter(void *_data,
+ struct ieee80211_sta *sta)
{
- if (vif->type == NL80211_IFTYPE_AP)
- cmd->wifi_gen.he_ap_support = 1;
- else
- cmd->wifi_gen.he_support = 1;
+ struct iwl_mld_sta *mld_sta = iwl_mld_sta_from_mac80211(sta);
+ struct iwl_mld_mac_wifi_gen_sta_iter_data *data = _data;
+ struct ieee80211_link_sta *link_sta;
+ unsigned int link_id;
+
+ if (mld_sta->vif != data->vif)
+ return;
+
+ for_each_sta_active_link(data->vif, sta, link_sta, link_id) {
+ if (link_sta->he_cap.has_he)
+ data->support->he_support = 1;
+ if (link_sta->eht_cap.has_eht)
+ data->support->eht_support = 1;
+ }
+}
+
+static void iwl_mld_set_wifi_gen(struct iwl_mld *mld,
+ struct ieee80211_vif *vif,
+ struct iwl_mac_wifi_gen_support *support)
+{
+ struct iwl_mld_mac_wifi_gen_sta_iter_data sta_iter_data = {
+ .vif = vif,
+ .support = support,
+ };
+ struct ieee80211_bss_conf *link_conf;
+ unsigned int link_id;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_MONITOR:
+ /* for sniffer, set to HW capabilities */
+ support->he_support = 1;
+ support->eht_support = mld->trans->cfg->eht_supported;
+ break;
+ case NL80211_IFTYPE_AP:
+ /* for AP set according to the link configs */
+ for_each_vif_active_link(vif, link_conf, link_id) {
+ support->he_ap_support |= link_conf->he_support;
+ support->eht_support |= link_conf->eht_support;
+ }
+ break;
+ default:
+ /*
+ * If we have MLO enabled, then the firmware needs to enable
+ * address translation for the station(s) we add. That depends
+ * on having EHT enabled in firmware, which in turn depends on
+ * mac80211 in the iteration below.
+ * However, mac80211 doesn't enable capabilities on the AP STA
+ * until it has parsed the association response successfully,
+ * so set EHT (and HE as a pre-requisite for EHT) when the vif
+ * is an MLD.
+ */
+ if (ieee80211_vif_is_mld(vif)) {
+ support->he_support = 1;
+ support->eht_support = 1;
+ }
+
+ ieee80211_iterate_stations_mtx(mld->hw,
+ iwl_mld_mac_wifi_gen_sta_iter,
+ &sta_iter_data);
+ break;
+ }
}
/* fill the common part for all interface types */
u32 action)
{
struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
- struct ieee80211_bss_conf *link_conf;
- unsigned int link_id;
lockdep_assert_wiphy(mld->wiphy);
cmd->nic_not_ack_enabled =
cpu_to_le32(!iwl_mld_is_nic_ack_enabled(mld, vif));
- /* If we have MLO enabled, then the firmware needs to enable
- * address translation for the station(s) we add. That depends
- * on having EHT enabled in firmware, which in turn depends on
- * mac80211 in the code below.
- * However, mac80211 doesn't enable HE/EHT until it has parsed
- * the association response successfully, so just skip all that
- * and enable both when we have MLO.
- */
- if (ieee80211_vif_is_mld(vif)) {
- iwl_mld_set_he_support(mld, vif, cmd);
- cmd->wifi_gen.eht_support = 1;
- return;
- }
-
- for_each_vif_active_link(vif, link_conf, link_id) {
- if (!link_conf->he_support)
- continue;
-
- iwl_mld_set_he_support(mld, vif, cmd);
-
- /* EHT, if supported, was already set above */
- break;
- }
+ iwl_mld_set_wifi_gen(mld, vif, &cmd->wifi_gen);
}
static void iwl_mld_fill_mac_cmd_sta(struct iwl_mld *mld,
if (vif->type == NL80211_IFTYPE_STATION)
iwl_mld_link_set_2mhz_block(mld, vif, sta);
+
+ if (sta->tdls) {
+ /*
+ * update MAC since wifi generation flags may change,
+ * we also update MAC on association to the AP via the
+ * vif assoc change
+ */
+ iwl_mld_mac_fw_action(mld, vif, FW_CTXT_ACTION_MODIFY);
+ }
+
/* Now the link_sta's capabilities are set, update the FW */
iwl_mld_config_tlc(mld, vif, sta);
/* just removed last TDLS STA, so enable PM */
iwl_mld_update_mac_power(mld, vif, false);
}
+
+ if (sta->tdls) {
+ /*
+ * update MAC since wifi generation flags may change,
+ * we also update MAC on disassociation to the AP via
+ * the vif assoc change
+ */
+ iwl_mld_mac_fw_action(mld, vif, FW_CTXT_ACTION_MODIFY);
+ }
} else {
return -EINVAL;
}