--- /dev/null
+From 146a15b873353f8ac28dc281c139ff611a3c4848 Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <nathan@kernel.org>
+Date: Wed, 25 Oct 2023 10:21:28 -0700
+Subject: arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
+
+From: Nathan Chancellor <nathan@kernel.org>
+
+commit 146a15b873353f8ac28dc281c139ff611a3c4848 upstream.
+
+Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly
+byte-swap NOP when compiling for big-endian, and the resulting series of
+bytes happened to match the encoding of FNMADD S21, S30, S0, S0.
+
+This went unnoticed until commit:
+
+ 34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD")
+
+Prior to that commit, the kernel would always enable the use of FPSIMD
+early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of
+FNMADD within the kernel was not detected, but could result in the
+corruption of user or kernel FPSIMD state.
+
+After that commit, the instructions happen to trap during boot prior to
+FPSIMD being detected and enabled, e.g.
+
+| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD
+| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
+| Hardware name: linux,dummy-virt (DT)
+| pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+| pc : __pi_strcmp+0x1c/0x150
+| lr : populate_properties+0xe4/0x254
+| sp : ffffd014173d3ad0
+| x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000
+| x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008
+| x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044
+| x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005
+| x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000
+| x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000
+| x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000
+| x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000
+| x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a
+| x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8
+| Kernel panic - not syncing: Unhandled exception
+| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
+| Hardware name: linux,dummy-virt (DT)
+| Call trace:
+| dump_backtrace+0xec/0x108
+| show_stack+0x18/0x2c
+| dump_stack_lvl+0x50/0x68
+| dump_stack+0x18/0x24
+| panic+0x13c/0x340
+| el1t_64_irq_handler+0x0/0x1c
+| el1_abort+0x0/0x5c
+| el1h_64_sync+0x64/0x68
+| __pi_strcmp+0x1c/0x150
+| unflatten_dt_nodes+0x1e8/0x2d8
+| __unflatten_device_tree+0x5c/0x15c
+| unflatten_device_tree+0x38/0x50
+| setup_arch+0x164/0x1e0
+| start_kernel+0x64/0x38c
+| __primary_switched+0xbc/0xc4
+
+Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is
+either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked
+commit.
+
+Closes: https://github.com/ClangBuiltLinux/linux/issues/1948
+Link: https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
+Signed-off-by: Nathan Chancellor <nathan@kernel.org>
+Cc: stable@vger.kernel.org
+Acked-by: Mark Rutland <mark.rutland@arm.com>
+Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.org
+Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/arm64/Kconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm64/Kconfig
++++ b/arch/arm64/Kconfig
+@@ -986,6 +986,8 @@ choice
+ config CPU_BIG_ENDIAN
+ bool "Build big-endian kernel"
+ depends on !LD_IS_LLD || LLD_VERSION >= 130000
++ # https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
++ depends on AS_IS_GNU || AS_VERSION >= 150000
+ help
+ Say Y if you plan on running a kernel with a big-endian userspace.
+
--- /dev/null
+From 99cd4935cb972d0aafb16838bb2aeadbcaf196ce Mon Sep 17 00:00:00 2001
+From: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
+Date: Thu, 14 Sep 2023 12:29:52 +0530
+Subject: clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
+
+From: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
+
+commit 99cd4935cb972d0aafb16838bb2aeadbcaf196ce upstream.
+
+GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
+on the request from dependent clocks. Doing so will result in the
+unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
+clocks.
+
+Cc: stable@vger.kernel.org
+Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
+Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
+Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
+Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-2-c8ceb1a37680@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/gcc-ipq6018.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-ipq6018.c
++++ b/drivers/clk/qcom/gcc-ipq6018.c
+@@ -75,7 +75,6 @@ static struct clk_fixed_factor gpll0_out
+ &gpll0_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -89,7 +88,6 @@ static struct clk_alpha_pll_postdiv gpll
+ &gpll0_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -164,7 +162,6 @@ static struct clk_alpha_pll_postdiv gpll
+ &gpll6_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -195,7 +192,6 @@ static struct clk_alpha_pll_postdiv gpll
+ &gpll4_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -246,7 +242,6 @@ static struct clk_alpha_pll_postdiv gpll
+ &gpll2_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -277,7 +272,6 @@ static struct clk_alpha_pll_postdiv nss_
+ &nss_crypto_pll_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
--- /dev/null
+From e641a070137dd959932c7c222e000d9d941167a2 Mon Sep 17 00:00:00 2001
+From: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
+Date: Thu, 14 Sep 2023 12:29:51 +0530
+Subject: clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
+
+commit e641a070137dd959932c7c222e000d9d941167a2 upstream.
+
+GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
+on the request from dependent clocks. Doing so will result in the
+unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
+clocks.
+
+Cc: stable@vger.kernel.org
+Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
+Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
+Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-1-c8ceb1a37680@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/gcc-ipq8074.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-ipq8074.c
++++ b/drivers/clk/qcom/gcc-ipq8074.c
+@@ -418,7 +418,6 @@ static struct clk_fixed_factor gpll0_out
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -465,7 +464,6 @@ static struct clk_alpha_pll_postdiv gpll
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -498,7 +496,6 @@ static struct clk_alpha_pll_postdiv gpll
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -532,7 +529,6 @@ static struct clk_alpha_pll_postdiv gpll
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -546,7 +542,6 @@ static struct clk_fixed_factor gpll6_out
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
+@@ -611,7 +606,6 @@ static struct clk_alpha_pll_postdiv nss_
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+- .flags = CLK_SET_RATE_PARENT,
+ },
+ };
+
--- /dev/null
+From 71956d0cb56c1e5f9feeb4819db87a076418e930 Mon Sep 17 00:00:00 2001
+From: Nitin Yadav <n-yadav@ti.com>
+Date: Thu, 26 Oct 2023 11:44:58 +0530
+Subject: mmc: sdhci_am654: fix start loop index for TAP value parsing
+
+From: Nitin Yadav <n-yadav@ti.com>
+
+commit 71956d0cb56c1e5f9feeb4819db87a076418e930 upstream.
+
+ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
+are currently ignored for all SD/MMC and eMMC modes. Fix this
+by making start loop index to MMC_TIMING_LEGACY.
+
+Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
+Signed-off-by: Nitin Yadav <n-yadav@ti.com>
+Acked-by: Adrian Hunter <adrian.hunter@intel.com>
+Cc: stable@vger.kernel.org
+Link: https://lore.kernel.org/r/20231026061458.1116276-1-n-yadav@ti.com
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/mmc/host/sdhci_am654.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mmc/host/sdhci_am654.c
++++ b/drivers/mmc/host/sdhci_am654.c
+@@ -600,7 +600,7 @@ static int sdhci_am654_get_otap_delay(st
+ return 0;
+ }
+
+- for (i = MMC_TIMING_MMC_HS; i <= MMC_TIMING_MMC_HS400; i++) {
++ for (i = MMC_TIMING_LEGACY; i <= MMC_TIMING_MMC_HS400; i++) {
+
+ ret = device_property_read_u32(dev, td[i].otap_binding,
+ &sdhci_am654->otap_del_sel[i]);
--- /dev/null
+From b44f9da81783fda72632ef9b0d05ea3f3ca447a5 Mon Sep 17 00:00:00 2001
+From: Dan Carpenter <dan.carpenter@linaro.org>
+Date: Thu, 2 Nov 2023 10:51:06 +0300
+Subject: mmc: vub300: fix an error code
+
+From: Dan Carpenter <dan.carpenter@linaro.org>
+
+commit b44f9da81783fda72632ef9b0d05ea3f3ca447a5 upstream.
+
+This error path should return -EINVAL instead of success.
+
+Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
+Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
+Cc: stable@vger.kernel.org
+Link: https://lore.kernel.org/r/0769d30c-ad80-421b-bf5d-7d6f5d85604e@moroto.mountain
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/mmc/host/vub300.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mmc/host/vub300.c
++++ b/drivers/mmc/host/vub300.c
+@@ -2311,6 +2311,7 @@ static int vub300_probe(struct usb_inter
+ vub300->read_only =
+ (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
+ } else {
++ retval = -EINVAL;
+ goto error5;
+ }
+ usb_set_intfdata(interface, vub300);
--- /dev/null
+From 6240553b52c475d9fc9674de0521b77e692f3764 Mon Sep 17 00:00:00 2001
+From: Helge Deller <deller@gmx.de>
+Date: Sun, 22 Oct 2023 11:48:11 +0200
+Subject: parisc/pdc: Add width field to struct pdc_model
+
+From: Helge Deller <deller@gmx.de>
+
+commit 6240553b52c475d9fc9674de0521b77e692f3764 upstream.
+
+PDC2.0 specifies the additional PSW-bit field.
+
+Signed-off-by: Helge Deller <deller@gmx.de>
+Cc: stable@vger.kernel.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/parisc/include/uapi/asm/pdc.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/parisc/include/uapi/asm/pdc.h
++++ b/arch/parisc/include/uapi/asm/pdc.h
+@@ -465,6 +465,7 @@ struct pdc_model { /* for PDC_MODEL */
+ unsigned long arch_rev;
+ unsigned long pot_key;
+ unsigned long curr_key;
++ unsigned long width; /* default of PSW_W bit (1=enabled) */
+ };
+
+ struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */
--- /dev/null
+From d0c219472980d15f5cbc5c8aec736848bda3f235 Mon Sep 17 00:00:00 2001
+From: Helge Deller <deller@gmx.de>
+Date: Tue, 17 Oct 2023 22:19:53 +0200
+Subject: parisc/power: Add power soft-off when running on qemu
+
+From: Helge Deller <deller@gmx.de>
+
+commit d0c219472980d15f5cbc5c8aec736848bda3f235 upstream.
+
+Signed-off-by: Helge Deller <deller@gmx.de>
+Cc: stable@vger.kernel.org # v6.0+
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/parisc/power.c | 16 +++++++++++++++-
+ 1 file changed, 15 insertions(+), 1 deletion(-)
+
+--- a/drivers/parisc/power.c
++++ b/drivers/parisc/power.c
+@@ -192,6 +192,14 @@ static struct notifier_block parisc_pani
+ .priority = INT_MAX,
+ };
+
++/* qemu soft power-off function */
++static int qemu_power_off(struct sys_off_data *data)
++{
++ /* this turns the system off via SeaBIOS */
++ *(int *)data->cb_data = 0;
++ pdc_soft_power_button(1);
++ return NOTIFY_DONE;
++}
+
+ static int __init power_init(void)
+ {
+@@ -221,7 +229,13 @@ static int __init power_init(void)
+ soft_power_reg);
+ }
+
+- power_task = kthread_run(kpowerswd, (void*)soft_power_reg, KTHREAD_NAME);
++ power_task = NULL;
++ if (running_on_qemu && soft_power_reg)
++ register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_DEFAULT,
++ qemu_power_off, (void *)soft_power_reg);
++ else
++ power_task = kthread_run(kpowerswd, (void*)soft_power_reg,
++ KTHREAD_NAME);
+ if (IS_ERR(power_task)) {
+ printk(KERN_ERR DRIVER_NAME ": thread creation failed. Driver not loaded.\n");
+ pdc_soft_power_button(0);
pci-sysfs-protect-driver-s-d3cold-preference-from-user-space.patch
watchdog-move-softlockup_panic-back-to-early_param.patch
acpi-resource-do-irq-override-on-tongfang-gmxxgxx.patch
+arm64-restrict-cpu_big_endian-to-gnu-as-or-llvm-ias-15.x-or-newer.patch
+parisc-pdc-add-width-field-to-struct-pdc_model.patch
+parisc-power-add-power-soft-off-when-running-on-qemu.patch
+clk-qcom-ipq8074-drop-the-clk_set_rate_parent-flag-from-pll-clocks.patch
+clk-qcom-ipq6018-drop-the-clk_set_rate_parent-flag-from-pll-clocks.patch
+mmc-vub300-fix-an-error-code.patch
+mmc-sdhci_am654-fix-start-loop-index-for-tap-value-parsing.patch
wifi-ath11k-fix-temperature-event-locking.patch
wifi-ath11k-fix-dfs-radar-event-locking.patch
wifi-ath11k-fix-htt-pktlog-locking.patch
projects / thirdparty / kernel / stable-queue.git / commitdiff
