arm64: dts: qcom: sdm845-lg-common: Sort nodes and properties

Improve adherance to style guidelines below:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-1-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 0ee2f4b99fbdb6bd8019187dbfab5f9977c8973f..93ed8f2404619201b58cd531e75356f03f56069b 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -38,11 +38,6 @@
                #size-cells = <2>;
                ranges;
 
-               qseecom_mem: memory@b2000000 {
-                       reg = <0 0xb2000000 0 0x1800000>;
-                       no-map;
-               };
-
                gpu_mem: memory@8c415000 {
                        reg = <0 0x8c415000 0 0x2000>;
                        no-map;
@@ -99,6 +94,11 @@
                        no-map;
                };
 
+               qseecom_mem: memory@b2000000 {
+                       reg = <0 0xb2000000 0 0x1800000>;
+                       no-map;
+               };
+
                rmtfs_mem: rmtfs-region@f0800000 {
                        compatible = "qcom,rmtfs-mem";
                        reg = <0 0xf0800000 0 0x202000>;
@@ -467,14 +467,22 @@
        status = "okay";
 };
 
+&pm8998_gpios {
+       vol_up_pin_a: vol-up-active-state {
+               pins = "gpio6";
+               function = "normal";
+               input-enable;
+               bias-pull-up;
+               qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+       };
+};
+
 &pm8998_resin {
        linux,code = <KEY_VOLUMEDOWN>;
        status = "okay";
 };
 
 &sdhc_2 {
-       status = "okay";
-
        cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 
        pinctrl-names = "default";
@@ -482,55 +490,8 @@
 
        vmmc-supply = <&vreg_l21a_2p95>;
        vqmmc-supply = <&vddpx_2>;
-};
-
-/*
- * UFS works partially and only with clk_ignore_unused.
- * Sometimes it crashes with I/O errors.
- */
-&ufs_mem_hc {
-       status = "okay";
-
-       reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
-       vcc-supply = <&vreg_l20a_2p95>;
-       vcc-max-microamp = <600000>;
-};
-
-&ufs_mem_phy {
-       status = "okay";
-
-       vdda-phy-supply = <&vdda_ufs1_core>;
-       vdda-pll-supply = <&vdda_ufs1_1p2>;
-};
-
-&usb_1 {
-       status = "okay";
-};
-
-&usb_1_dwc3 {
-       /* TODO: these devices have usb id pin */
-       dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
-       status = "okay";
-
-       vdd-supply = <&vdda_usb1_ss_core>;
-       vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-       vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-       qcom,imp-res-offset-value = <8>;
-       qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-       qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-       qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
 
-&usb_1_qmpphy {
        status = "okay";
-
-       vdda-phy-supply = <&vdda_usb1_ss_1p2>;
-       vdda-pll-supply = <&vdda_usb1_ss_core>;
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
@@ -571,12 +532,51 @@
        };
 };
 
-&pm8998_gpios {
-       vol_up_pin_a: vol-up-active-state {
-               pins = "gpio6";
-               function = "normal";
-               input-enable;
-               bias-pull-up;
-               qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-       };
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+       reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+       vcc-supply = <&vreg_l20a_2p95>;
+       vcc-max-microamp = <600000>;
+
+       status = "okay";
+};
+
+&ufs_mem_phy {
+       vdda-phy-supply = <&vdda_ufs1_core>;
+       vdda-pll-supply = <&vdda_ufs1_1p2>;
+
+       status = "okay";
+};
+
+&usb_1 {
+       status = "okay";
+};
+
+&usb_1_dwc3 {
+       /* TODO: these devices have usb id pin */
+       dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+       vdd-supply = <&vdda_usb1_ss_core>;
+       vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+       vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+       qcom,imp-res-offset-value = <8>;
+       qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+       qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+       qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+
+       status = "okay";
+};
+
+&usb_1_qmpphy {
+       vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+       vdda-pll-supply = <&vdda_usb1_ss_core>;
+
+       status = "okay";
 };