arm64: dts: qcom: x1e80100-qcp: Fix swapped USB MP repeaters

The &eusb3_repeater belongs to the first port of the USB MP controller and
the &eusb6_repeater belongs to the second. This is obvious if one looks at
e.g. the CRD or the Dell XPS where only the second port of the USB MP is
used: They only have the &eusb6_repeater and already specify it for the
&usb_mp_hsphy1.

Swap them to set the correct repeater for each of the USB ports.

Fixes: 9f53c3611960 ("arm64: dts: qcom: x1e78100-qcp: Enable Type-A USB ports labeled 3 and 4/6")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250819-x1e80100-fix-usb-mp-repeaters-v1-4-0f8c186458d3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 9369b76c668b5c008fefd85d5ca18e87ab9ce93f..b02a66f0895e9c91e5403553620615e0a3bfd7a9 100644 (file)
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -1507,7 +1507,7 @@
        vdd-supply = <&vreg_l2e_0p8>;
        vdda12-supply = <&vreg_l3e_1p2>;
 
-       phys = <&eusb6_repeater>;
+       phys = <&eusb3_repeater>;
 
        status = "okay";
 };
@@ -1516,7 +1516,7 @@
        vdd-supply = <&vreg_l2e_0p8>;
        vdda12-supply = <&vreg_l3e_1p2>;
 
-       phys = <&eusb3_repeater>;
+       phys = <&eusb6_repeater>;
 
        status = "okay";
 };