Xilinx: ARM: Renamed u-boot prompt from pele to zynq on zc702

This patch is a part of cleanup activity.

Signed-off-by: Jagan <jaganna@xilinx.com>

diff --git a/include/configs/zynq_zc702.h b/include/configs/zynq_zc702.h
index cec2475a05e44e0d77965bfcd1b9fcbe14e29ff3..37f41bd1a7f39523d592e19a4b2052cebead33fc 100644 (file)
--- a/include/configs/zynq_zc702.h
+++ b/include/configs/zynq_zc702.h
@@ -29,11 +29,11 @@
 #define CONFIG_ETHADDR  00:0a:35:00:01:22
 #define CONFIG_SERVERIP 10.10.70.101
 
-#define CONFIG_EXTRA_ENV_SETTINGS      \
-       "kernel_size=0x140000\0"        \
-       "ramdisk_size=0x200000\0"       \
-       "nand_kernel_size=0x400000\0"   \
-       "nand_ramdisk_size=0x400000\0"  \
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "kernel_size=0x140000\0"        \
+       "ramdisk_size=0x200000\0"       \
+       "nand_kernel_size=0x400000\0"   \
+       "nand_ramdisk_size=0x400000\0"  \
        "bootcmd=run modeboot\0"        \
        "norboot=echo Copying Linux from NOR flash to RAM...; \
                            cp 0xE2100000 0x8000 ${kernel_size}; \
@@ -80,7 +80,7 @@
 #define        CONFIG_PSS_SERIAL
 #define        CONFIG_RTC_XPSSRTC
 
-#include <config_cmd_default.h>        
+#include <config_cmd_default.h>
 #define CONFIG_CMD_DATE                /* RTC? */
 #define CONFIG_CMD_PING                /* Might be useful for debugging */
 #define CONFIG_CMD_SAVEENV     /* Command to save ENV to Flash */
@@ -97,12 +97,12 @@
 #define CONFIG_AUTO_COMPLETE   1
 #define CONFIG_CMDLINE_EDITING 1
 
-#define CONFIG_SYS_PROMPT      "pele-boot> "
+#define CONFIG_SYS_PROMPT      "zynq-uboot> "
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT      
+#undef CONFIG_SKIP_RELOCATE_UBOOT
 
 /* Uncomment it if you don't want Flash */
-//#define CONFIG_SYS_NO_FLASH  
+/*#define CONFIG_SYS_NO_FLASH  */
 
 #define CONFIG_SYS_SDRAM_BASE  0
 
@@ -115,7 +115,7 @@
 #ifndef CONFIG_SYS_NO_FLASH
 
 /* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE           0xE2000000 
+#define CONFIG_SYS_FLASH_BASE           0xE2000000
 #define CONFIG_SYS_FLASH_SIZE           (16*1024*1024)  /* i.e. 16MB */
 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors/blocks on one chip */
@@ -126,13 +126,13 @@
 
 #define CONFIG_SYS_FLASH_CFI            1
 // #define CONFIG_SYS_FLASH_EMPTY_INFO     0
-#define CONFIG_FLASH_CFI_DRIVER        1
+#define CONFIG_FLASH_CFI_DRIVER                1
 
 #define CONFIG_SYS_FLASH_PROTECTION     0       /* use hardware protection           */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* use buffered writes (20x faster)  */
-//#define CONFIG_ENV_ADDR              (CONFIG_SYS_FLASH_BASE + 0x00000000)
+/*#define CONFIG_ENV_ADDR      (CONFIG_SYS_FLASH_BASE + 0x00000000)    */
 #define CONFIG_ENV_OFFSET              0xC0000         /*768 KB*/
-#define CONFIG_ENV_SECT_SIZE           0x20000         /*128 KB*/
+#define CONFIG_ENV_SECT_SIZE           0x20000         /*128 KB*/
 #ifdef CONFIG_EP107
 # define CONFIG_ENV_IS_IN_FLASH                1
 #else
@@ -153,7 +153,7 @@
 /* CONFIG_SYS_GLOBAL_DATA_OFFSET? */
 
 /* Because (at least at first) we're going to be loaded via JTAG_Tcl */
-//#define CONFIG_SKIP_LOWLEVEL_INIT    
+/*#define CONFIG_SKIP_LOWLEVEL_INIT    */
 
 
 /* HW to use */