commit
d3c4c1f29aadccf2f43530bfa1e60a6d8030fd4a upstream.
EOI (End Or Identify) is a hardware line on the GPIB bus that can be
asserted with the last byte of a message to indicate the end of the
transfer to the receiving device.
In this driver, a write with send_eoi true is done in 3 parts:
Send first byte directly
Send remaining but 1 bytes using the fifo
Send the last byte directly with EOI asserted
The first byte in a write is always sent by writing to the tms9914
chip directly to setup for the subsequent fifo transfer. We were not
checking for a 1 byte write with send_eoi true resulting in EOI not
being asserted. Since the fifo transfer was not executed
(fifotransfersize == 0) the retval in the test after the fifo transfer
code was still 1 from the preceding direct write. This caused it to
return without executing the final direct write which would have sent
an unsollicited extra byte.
For a 2 byte message the first byte was sent directly. But since the
fifo transfer was not executed (fifotransfersize == 1) and the retval
in the test after the fifo transfer code was still 1 from the
preceding first byte write it returned before the final direct byte
write with send_eoi true. The second byte was then sent as a separate
1 byte write to complete the 2 byte write count again without EOI
being asserted as above.
Only send the first byte directly if more than 1 byte is to be
transferred with send_eoi true.
Also check for retval < 0 for the error return in case the fifo code
is not used (1 or 2 byte message with send_eoi true).
Fixes: 09a4655ee1eb ("staging: gpib: Add HP/Agilent/Keysight 8235xx PCI GPIB driver")
Cc: stable <stable@kernel.org>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
return retval;
#endif
- retval = agilent_82350b_write(board, buffer, 1, 0, &num_bytes);
- *bytes_written += num_bytes;
- if (retval < 0)
- return retval;
+ if (fifotransferlength > 0) {
+ retval = agilent_82350b_write(board, buffer, 1, 0, &num_bytes);
+ *bytes_written += num_bytes;
+ if (retval < 0)
+ return retval;
+ }
write_byte(tms_priv, tms_priv->imr0_bits & ~HR_BOIE, IMR0);
for (i = 1; i < fifotransferlength;) {
break;
}
write_byte(tms_priv, tms_priv->imr0_bits, IMR0);
- if (retval)
+ if (retval < 0)
return retval;
if (send_eoi) {