6.0-stable patches

added patches:
	usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch

diff --git a/queue-6.0/series b/queue-6.0/series
index 67ce78e43b3b983f5f6b6e30e0544cebf94d71cf..c673aa408d8304e6c607bed8b9bb4f1d47c925e6 100644 (file)
--- a/queue-6.0/series
+++ b/queue-6.0/series
@@ -2,3 +2,4 @@ arm-renumber-bits-related-to-_tif_work_mask.patch
 btrfs-replace-strncpy-with-strscpy.patch
 cifs-fix-interface-count-calculation-during-refresh.patch
 cifs-refcount-only-the-selected-iface-during-interface-update.patch
+usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch

diff --git a/queue-6.0/usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch b/queue-6.0/usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch
new file mode 100644 (file)
index 0000000..c7f613a
--- /dev/null
+++ b/queue-6.0/usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch
@@ -0,0 +1,56 @@
+From c4e3ef5685393c5051b52cf1e94b8891d49793ab Mon Sep 17 00:00:00 2001
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Date: Thu, 8 Dec 2022 16:50:35 -0800
+Subject: usb: dwc3: gadget: Ignore End Transfer delay on teardown
+
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+
+commit c4e3ef5685393c5051b52cf1e94b8891d49793ab upstream.
+
+If we delay sending End Transfer for Setup TRB to be prepared, we need
+to check if the End Transfer was in preparation for a driver
+teardown/soft-disconnect. In those cases, just send the End Transfer
+command without delay.
+
+In the case of soft-disconnect, there's a very small chance the command
+may not go through immediately. But should it happen, the Setup TRB will
+be prepared during the polling of the controller halted state, allowing
+the command to go through then.
+
+In the case of disabling endpoint due to reconfiguration (e.g.
+set_interface(alt-setting) or usb reset), then it's driven by the host.
+Typically the host wouldn't immediately cancel the control request and
+send another control transfer to trigger the End Transfer command
+timeout.
+
+Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status")
+Cc: stable@vger.kernel.org
+Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc3/gadget.c |    5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -1702,6 +1702,7 @@ static int __dwc3_stop_active_transfer(s
+       else if (!ret)
+               dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+ 
++      dep->flags &= ~DWC3_EP_DELAY_STOP;
+       return ret;
+ }
+ 
+@@ -3701,8 +3702,10 @@ void dwc3_stop_active_transfer(struct dw
+       if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
+               return;
+ 
++      if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP))
++              return;
++
+       if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
+-          (dep->flags & DWC3_EP_DELAY_STOP) ||
+           (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+               return;
+