The BPi-R4 Lite is a WiFi-7 router board based on the MT7987 SoC.
Specification :
- SOC: Mediatek MT7987A (4x Cortex-A53
- RAM: 2GB
- Flash: 32MB SPI NOR, 256MB SPI NAND, 8GB eMMC
- Switch: MediaTek MT7531AE
- Ports : 4x LAN (1G), 1x SFP (via MT7531), 1x WAN (2.5G)
- Buttons : Reset & WPS/Mesh
- LEDs : Status (PWM), SFP
- USB: on-board VIA VL817 USB3.1/USB2.0 hub
* 1 - mPCIe B (SIM3)
* 2 - NGFF-KEYB (SIM1)
* 3 - USB-A connector
* 4 - mPCIe A (SIM4)
- mPCIe: 1x 8GT/s x2 or 2x 8GT/s x1 (configurable via bootloader)
- RTC: PCF8563
- mikroBUS socket with SPI, I2C and full UART
- on-board HT42B534 USB-to-serial for Type-C console port
- Power: USB Type-C PD 20V, or DC via barrel connector or JST-VH 3.96
Installation:
Uncompress *sdcard.img.gz and write to microSD card, eg. using 'dd'.
Use bootloader menu on the serial console to install SPI-NAND or SPI-NOR,
once installed to SPI-NAND you can use the bootloader menu to install to
eMMC. See instructions for BananaPi R3 for details.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
bananapi,bpi-r3-mini|\
bananapi,bpi-r4|\
bananapi,bpi-r4-2g5|\
+bananapi,bpi-r4-lite|\
bananapi,bpi-r4-poe)
[ -z "$(fw_printenv -n ethaddr 2>/dev/null)" ] &&
fw_setenv ethaddr "$(cat /sys/class/net/eth0/address)"
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "bananapi,bpi-r4-lite",
+ "mediatek,mt7987a", "mediatek,mt7987";
+};
+
+/ {
+ fragment@0 {
+ target-path = "/soc/pinctrl@1001f000";
+ __overlay__ {
+ pcie_sel: aw35710qnr_sel {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+ };
+
+ fragment@1 {
+ target-path = "/soc/pcie@11290000";
+ __overlay__ {
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "bananapi,bpi-r4-lite",
+ "mediatek,mt7987a", "mediatek,mt7987";
+};
+
+/ {
+ fragment@0 {
+ target-path = "/soc/pinctrl@1001f000";
+ __overlay__ {
+ pcie_sel: aw35710qnr_sel {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+ };
+
+ fragment@1 {
+ target-path = "/soc/pcie@11290000";
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
+
--- /dev/null
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "bananapi,bpi-r4-lite",
+ "mediatek,mt7987a", "mediatek,mt7987";
+};
+
+&{/soc/mmc@11230000} {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc_pins_default>;
+ pinctrl-1 = <&mmc_pins_uhs>;
+ reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
+
+ bus-width = <4>; /* interference from shared DAT5<->SD-CD pin */
+ max-frequency = <48000000>;
+ cap-mmc-highspeed;
+ non-removable;
+ no-sd;
+ no-sdio;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+
+ card@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+
+ partitions {
+ compatible = "gpt-partitions";
+
+ block-partition-env {
+ partname = "ubootenv";
+ nvmem-layout {
+ compatible = "u-boot,env-layout";
+ };
+ };
+
+ emmc_rootfs: block-partition-production {
+ partname = "production";
+ };
+ };
+ };
+};
+
+&{/chosen} {
+ rootdisk-emmc = <&emmc_rootfs>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * --------------- Bananapi Bpi R4 Lite MikroBus ----------------
+ * | 9 | GPIO7/PWM1 | 8 |
+ * | 10 | GPIO6/PCM_FS/UART1_RTS GPIO5/PCM_CLK/UART1_CTS | 7 |
+ * | 11 | GPIO49/SPI1_CS GPIO3/PCM_DTX/UART1_RXD | 6 |
+ * | 12 | GPIO46/SPI1_CLK GPIO4/PCM_DRX/UART1_TXD | 5 |
+ * | 13 | GPIO48/SPI1_MISO I2C3 SCL (PCA9548) | 4 |
+ * | 14 | GPIO47/SPI1_MOSI I2C3 SDA (PCA9548) | 3 |
+ * | 15 | +3.3V +5V | 2 |
+ * | 16 | GND GND | 1 |
+ * --------------------------------------------------------------
+ */
+
+/ {
+ mikrobus: MikroBus {
+ compatible = "simple-bus";
+
+ /* MikroBus pins 5,6,7,8 as GPIOs */
+ mikrobus_gpios_0: gpio-export@0 {
+ compatible = "gpio-export";
+ status = "disabled";
+
+ gpio-3 {
+ gpio-export,name = "mikrobus-gpio-RX";
+ gpio-export,output = <1>;
+ gpios = <&pio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-4 {
+ gpio-export,name = "mikrobus-gpio-TX";
+ gpio-export,output = <1>;
+ gpios = <&pio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-5 {
+ gpio-export,name = "mikrobus-gpio-INT";
+ gpio-export,output = <1>;
+ gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-6 {
+ gpio-export,name = "mikrobus-gpio-INT";
+ gpio-export,output = <1>;
+ gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* MikroBus pins 11,12,13,14 as GPIOs */
+ mikrobus_gpios_1: gpio-export@1 {
+ compatible = "gpio-export";
+ status = "disabled";
+
+ gpio-46 {
+ gpio-export,name = "mikrobus-gpio-CS";
+ gpio-export,output = <1>;
+ gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-47 {
+ gpio-export,name = "mikrobus-gpio-MOSI";
+ gpio-export,output = <1>;
+ gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-48 {
+ gpio-export,name = "mikrobus-gpio-MISO";
+ gpio-export,output = <1>;
+ gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-49 {
+ gpio-export,name = "mikrobus-gpio-SCK";
+ gpio-export,output = <1>;
+ gpios = <&pio 49 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ };
+};
+
+/* MikroBus pins 3,4 as I2C3 (Provided by PCA9548 i2c-mux) */
+/* Please refer to &imux2_MikroBus device tree node */
+
+/* MikroBus pins 5,6,7,10 as PCM function */
+&afe {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcm_pins>;
+ status = "disabled";
+};
+
+&pcm_pins {
+ mux {
+ function = "pcm";
+ groups = "pcm0_0";
+ };
+};
+
+/* MikroBus pins 5,6,7,10 as UART1 function */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&uart1_pins {
+ mux {
+ function = "uart";
+ groups = "uart1_0";
+ };
+};
+
+/* MikroBus pins 8 as PWM1 */
+/* Please refer to &pwm device tree node */
+
+/* MikroBus pins 11,12,13,14 as SPI1 function */
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic_pins>;
+ status = "okay";
+};
+
+&spic_pins {
+ mux {
+ function = "spi";
+ groups = "spi1_1";
+ };
+};
--- /dev/null
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "bananapi,bpi-r4-lite",
+ "mediatek,mt7987a", "mediatek,mt7987";
+};
+
+&{/soc/spi@11009800} {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2-nand";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0xfe00000>;
+ compatible = "linux,ubi";
+
+ volumes {
+ ubi-volume-ubootenv {
+ volname = "ubootenv";
+ nvmem-layout {
+ compatible = "u-boot,env-redundant-bool-layout";
+ };
+ };
+
+ ubi-volume-ubootenv2 {
+ volname = "ubootenv2";
+ nvmem-layout {
+ compatible = "u-boot,env-redundant-bool-layout";
+ };
+ };
+
+ ubi_rootfs: ubi-volume-fit {
+ volname = "fit";
+ };
+ };
+ };
+ };
+ };
+};
+
+&{/chosen} {
+ rootdisk-spim-nand = <&ubi_rootfs>;
+};
--- /dev/null
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "bananapi,bpi-r4-lite",
+ "mediatek,mt7987a", "mediatek,mt7987";
+};
+
+&{/soc/spi@11009800} {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2-nor";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition@50000 {
+ label = "factory";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "fip";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition@180000 {
+ label = "recovery";
+ reg = <0x180000 0xe80000>;
+ };
+
+ nor_rootfs: partition@1000000 {
+ label = "fit";
+ reg = <0x1000000 0x1000000>;
+ compatible = "denx,fit";
+ };
+ };
+ };
+};
+
+&{/chosen} {
+ rootdisk-nor = <&nor_rootfs>;
+};
--- /dev/null
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "bananapi,bpi-r4-lite",
+ "mediatek,mt7987a", "mediatek,mt7987";
+};
+
+&{/soc/mmc@11230000} {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd_pins_default>;
+ pinctrl-1 = <&sd_pins_uhs>;
+ cd-gpios = <&pio 20 GPIO_ACTIVE_LOW>;
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+
+ card@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+
+ partitions {
+ compatible = "gpt-partitions";
+
+ block-partition-env {
+ partname = "ubootenv";
+ nvmem-layout {
+ compatible = "u-boot,env-layout";
+ };
+ };
+
+ sd_rootfs: block-partition-production {
+ partname = "production";
+ };
+ };
+ };
+};
+
+&{/chosen} {
+ rootdisk-sd = <&sd_rootfs>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7987a.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "mt7987a-bananapi-bpi-r4-lite-mikrobus.dtsi"
+
+/ {
+ model = "Bananapi BPI-R4-LITE";
+ compatible = "bananapi,bpi-r4-lite",
+ "mediatek,mt7987a", "mediatek,mt7987";
+
+ aliases {
+ /* mt7987 I2C0 */
+ i2c0 = &i2c0;
+ /* PCA9548 (0-0070) provides 4 i2c channels */
+ i2c1 = &imux0_rtc;
+ i2c2 = &imux1_sfp;
+ i2c3 = &imux2_MikroBus;
+ i2c4 = &imux3;
+ led-boot = &sys_led_blue;
+ led-failsafe = &sys_led_blue;
+ led-running = &sys_led_blue;
+ led-upgrade = &sys_led_blue;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n1 earlycon=uart8250,mmio32,0x11000000 \
+ ubi.block=0,firmware root=/dev/fit0 rootwait";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ sfp-led {
+ gpios = <&pca9555 11 GPIO_ACTIVE_LOW>;
+ function = "sfp";
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+ status = "okay";
+
+ /* ACT LED on bpi-r4-lite */
+ sys_led_blue: sys-led {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ pwms = <&pwm 0 50000>;
+ max-brightness = <255>;
+ active-high;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sfp: sfp@0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&imux1_sfp>;
+ los-gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&pio 8 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&pca9555 13 GPIO_ACTIVE_HIGH>;
+ rate-select1-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_usb_5v: regulator-usb-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-vbus-regulator {
+ compatible = "regulator-output";
+ vout-supply = <®_usb_5v>;
+ };
+};
+
+&fan {
+ pwms = <&pwm 2 50000>;
+ status = "okay";
+};
+
+&gmac0 {
+ phy-mode = "2500base-x";
+ status = "okay";
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+};
+
+&gmac1 {
+ phy-mode = "internal";
+ phy-handle = <&phy15>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
+&pwm_pins {
+ mux {
+ /*
+ * - pwm0 : PWM0@PIN13
+ * - pwm1_0 : PWM@PIN7 (share with JTAG)
+ * - pwm2_0 : PWM2@PIN12 (share with PCM)
+ */
+ function = "pwm";
+ groups = "pwm0", "pwm1_0", "pwm2_0";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ pca9545@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imux0_rtc: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ };
+ };
+
+ imux1_sfp: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+
+ imux2_MikroBus: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+
+ imux3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ pca9555: i2c-gpio-expander@20 {
+ compatible = "nxp,pca9555";
+ interrupt-controller;
+ interrupt-parent = <&pio>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+
+ wifi_eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ wp-gpios = <&pca9555 10 GPIO_ACTIVE_LOW>;
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ };
+ };
+ };
+};
+
+&mdio {
+ /* built-in 2.5G Ethernet PHY */
+ phy15: phy@15 {
+ pinctrl-names = "i2p5gbe-led";
+ pinctrl-0 = <&i2p5gbe_led0_pins>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <15>;
+ phy-mode = "internal";
+ };
+
+ switch31: switch@31 {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+};
+
+&ssusb {
+ mediatek,u3p-dis-msk=<0>;
+ phys = <&tphyu2port0 PHY_TYPE_USB2>,
+ <&tphyu3port0 PHY_TYPE_USB3>;
+
+ /*
+ * VIA VL817 USB3.1/USB2.0 hub
+ * ports:
+ * 1 - mPCIe B (SIM3)
+ * 2 - NGFF-KEYB (SIM1)
+ * 3 - USB-A connector
+ * 4 - mPCIe A (SIM4)
+ */
+
+ // reset-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+};
+
+&switch31 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "sfp0";
+ phy-mode = "2500base-x";
+ sfp = <&sfp>;
+ managed = "in-band-status";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
+
+&tphyu3port0 {
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_flash_pins>;
+
+ status = "okay";
+};
ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
;;
+bananapi,bpi-r4-lite)
+ ucidef_set_led_netdev "sfp0" "sfp0" "green:sfp" "sfp0" "link tx rx"
+ ;;
cudy,re3000-v1|\
wavlink,wl-wn573hx3)
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" "link tx rx"
bananapi,bpi-r4)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 sfp-lan" "wan sfp-wan"
;;
+ bananapi,bpi-r4-lite)
+ ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 sfp0" "eth1"
+ ;;
bananapi,bpi-r4-2g5|\
bananapi,bpi-r4-poe)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan sfp-wan"
bananapi,bpi-r4|\
bananapi,bpi-r4-2g5|\
bananapi,bpi-r4-poe|\
+ bananapi,bpi-r4-lite|\
cmcc,a10-ubootmod|\
cmcc,rax3000m|\
cudy,tr3000-v1-ubootmod|\
bananapi,bpi-r4|\
bananapi,bpi-r4-2g5|\
bananapi,bpi-r4-poe|\
+ bananapi,bpi-r4-lite|\
cmcc,a10-ubootmod|\
cmcc,rax3000m|\
cudy,tr3000-v1-ubootmod|\
bananapi,bpi-r4|\
bananapi,bpi-r4-2g5|\
bananapi,bpi-r4-poe|\
+ bananapi,bpi-r4-lite|\
cmcc,rax3000m|\
gatonetworks,gdsp|\
mediatek,mt7988a-rfb)
endef
TARGET_DEVICES += bananapi_bpi-r4-poe
+define Device/bananapi_bpi-r4-lite
+ DEVICE_VENDOR := Bananapi
+ DEVICE_MODEL := BPi-R4 Lite
+ DEVICE_DTS := mt7987a-bananapi-bpi-r4-lite
+ DEVICE_DTS_OVERLAY:= mt7987a-bananapi-bpi-r4-lite-1pcie-2L mt7987a-bananapi-bpi-r4-lite-2pcie-1L \
+ mt7987a-bananapi-bpi-r4-lite-emmc mt7987a-bananapi-bpi-r4-lite-sd \
+ mt7987a-bananapi-bpi-r4-lite-nand mt7987a-bananapi-bpi-r4-lite-nor
+ DEVICE_DTS_CONFIG := config-mt7987a-bananapi-bpi-r4-lite
+ DEVICE_DTC_FLAGS := --pad 4096
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS_LOADADDR := 0x4ff00000
+ DEVICE_PACKAGES := mt7987-2p5g-phy-firmware-internal kmod-eeprom-at24 \
+ kmod-gpio-pca953x kmod-i2c-mux-pca954x kmod-rtc-pcf8563 \
+ kmod-sfp e2fsprogs mkf2fs
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ KERNEL_LOADADDR := 0x40000000
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
+ ARTIFACTS := \
+ emmc-preloader.bin emmc-bl31-uboot.fip \
+ nor-preloader.bin nor-bl31-uboot.fip \
+ sdcard.img.gz \
+ snand-preloader.bin snand-bl31-uboot.fip
+ ARTIFACT/emmc-preloader.bin := mt7987-bl2 emmc-comb
+ ARTIFACT/emmc-bl31-uboot.fip := mt7987-bl31-uboot bananapi_bpi-r4-lite-emmc
+ ARTIFACT/nor-preloader.bin := mt7987-bl2 nor-comb
+ ARTIFACT/nor-bl31-uboot.fip := mt7987-bl31-uboot bananapi_bpi-r4-lite-nor
+ ARTIFACT/snand-preloader.bin := mt7987-bl2 spim-nand2-ubi-comb
+ ARTIFACT/snand-bl31-uboot.fip := mt7987-bl31-uboot bananapi_bpi-r4-lite-snand
+ ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
+ pad-to 17k | mt7987-bl2 sdmmc-comb |\
+ pad-to 6656k | mt7987-bl31-uboot bananapi_bpi-r4-lite-sdmmc |\
+ $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
+ pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
+ ) \
+ pad-to 44M | mt7987-bl2 spim-nand2-ubi-comb |\
+ pad-to 45M | mt7987-bl31-uboot bananapi_bpi-r4-lite-snand |\
+ pad-to 49M | mt7987-bl2 nor-comb |\
+ pad-to 50M | mt7987-bl31-uboot bananapi_bpi-r4-lite-nor |\
+ pad-to 51M | mt7987-bl2 emmc-comb |\
+ pad-to 52M | mt7987-bl31-uboot bananapi_bpi-r4-lite-emmc |\
+ pad-to 56M | mt798x-gpt emmc |\
+ $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
+ pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
+ ) \
+ gzip
+ifeq ($(DUMP),)
+ IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+endif
+endef
+TARGET_DEVICES += bananapi_bpi-r4-lite
+
define Device/buffalo_wsr-6000ax8
DEVICE_MODEL := WSR-6000AX8
DEVICE_VENDOR := Buffalo
projects / thirdparty / openwrt.git / commitdiff
