arm64: dts: rockchip: set num-cs property for spi on px30

[ Upstream commit 334bf0710c98d391f4067b72f535d6c4c84dfb6f ]

The px30 has two spi controllers with two chip-selects each.
The num-cs property is specified as the total number of chip
selects a controllers has and is used since 2020 to find uses
of chipselects outside that range in the Rockchip spi driver.

Without the property set, the default is 1, so spi devices
using the second chipselect will not be created.

Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240119101656.965744-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 0d6761074b11af23a2e721e5990d7dd82e15473b..f241e7c318bcdd2e36da19c44e2415b6988fe05f 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -577,6 +577,7 @@
                clock-names = "spiclk", "apb_pclk";
                dmas = <&dmac 12>, <&dmac 13>;
                dma-names = "tx", "rx";
+               num-cs = <2>;
                pinctrl-names = "default";
                pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
                #address-cells = <1>;
@@ -592,6 +593,7 @@
                clock-names = "spiclk", "apb_pclk";
                dmas = <&dmac 14>, <&dmac 15>;
                dma-names = "tx", "rx";
+               num-cs = <2>;
                pinctrl-names = "default";
                pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
                #address-cells = <1>;