]> git.ipfire.org Git - thirdparty/kernel/stable.git/commitdiff
net: stmmac: Fix IP-cores specific MAC capabilities
authorSerge Semin <fancer.lancer@gmail.com>
Fri, 12 Apr 2024 18:03:16 +0000 (21:03 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 27 Apr 2024 15:11:33 +0000 (17:11 +0200)
[ Upstream commit 9cb54af214a7cdc91577ec083e5569f2ce2c86d8 ]

Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores currently supported by the driver:

DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
   MAC_10 | MAC_100

DW GMAC:  MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
          MAC_10 | MAC_100 | MAC_1000

Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
                     MAC_10 | MAC_100 | MAC_1000

DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
            MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
if there is more than 1 active Tx/Rx queues:
   MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
           MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD

DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
          MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD

DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
          MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD |
          MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD

As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.

Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.

Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit
8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.

Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports")
Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes")
Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/net/ethernet/stmicro/stmmac/common.h
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

index b0dd8adce35604ea48a8efbf553f4a9b253c0bbb..4dbc076f72d65a9b97fd95172b54f2013145a4de 100644 (file)
@@ -550,6 +550,7 @@ extern const struct stmmac_hwtimestamp stmmac_ptp;
 extern const struct stmmac_mode_ops dwmac4_ring_mode_ops;
 
 struct mac_link {
+       u32 caps;
        u32 speed_mask;
        u32 speed10;
        u32 speed100;
index 51f121f86745770d72273f86e99661609aa6a55c..63998d65fef8eb2696dda0c9f32ef4a64a8dd7db 100644 (file)
@@ -1096,6 +1096,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
 
        priv->dev->priv_flags |= IFF_UNICAST_FLT;
 
+       mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+                        MAC_10 | MAC_100 | MAC_1000;
        /* The loopback bit seems to be re-set when link change
         * Simply mask it each time
         * Speed 10/100/1000 are set in BIT(2)/BIT(3)
index 3927609abc44110be97903aee12e25084473b80c..8555299443f4edf2475b95c1785544a1c3b73251 100644 (file)
@@ -539,6 +539,8 @@ int dwmac1000_setup(struct stmmac_priv *priv)
        if (mac->multicast_filter_bins)
                mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
+       mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+                        MAC_10 | MAC_100 | MAC_1000;
        mac->link.duplex = GMAC_CONTROL_DM;
        mac->link.speed10 = GMAC_CONTROL_PS;
        mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
index a6e8d7bd95886fc277c7e22c896ddf618e0fca97..7667d103cd0ebd9670a42360a095cfd322c8ebac 100644 (file)
@@ -175,6 +175,8 @@ int dwmac100_setup(struct stmmac_priv *priv)
        dev_info(priv->device, "\tDWMAC100\n");
 
        mac->pcsr = priv->ioaddr;
+       mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+                        MAC_10 | MAC_100;
        mac->link.duplex = MAC_CONTROL_F;
        mac->link.speed10 = 0;
        mac->link.speed100 = 0;
index 434e306876b416ca69b1ba3857810963ea747dcd..4ead0ddf43a7a83ba929aee50dad154898f53d0d 100644 (file)
@@ -70,14 +70,10 @@ static void dwmac4_core_init(struct mac_device_info *hw,
 
 static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
 {
-       priv->phylink_config.mac_capabilities |= MAC_2500FD;
-
        if (priv->plat->tx_queues_to_use > 1)
-               priv->phylink_config.mac_capabilities &=
-                       ~(MAC_10HD | MAC_100HD | MAC_1000HD);
+               priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD);
        else
-               priv->phylink_config.mac_capabilities |=
-                       (MAC_10HD | MAC_100HD | MAC_1000HD);
+               priv->hw->link.caps |= (MAC_10HD | MAC_100HD | MAC_1000HD);
 }
 
 static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
@@ -1354,6 +1350,8 @@ int dwmac4_setup(struct stmmac_priv *priv)
        if (mac->multicast_filter_bins)
                mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
+       mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+                        MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
        mac->link.duplex = GMAC_CONFIG_DM;
        mac->link.speed10 = GMAC_CONFIG_PS;
        mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
index 24c53b7255a2eff140ebe07bbaa20d69040332cd..8bc317d2f7a6118b3f65aca128aafe8439af2d8c 100644 (file)
@@ -47,14 +47,6 @@ static void dwxgmac2_core_init(struct mac_device_info *hw,
        writel(XGMAC_INT_DEFAULT_EN, ioaddr + XGMAC_INT_EN);
 }
 
-static void xgmac_phylink_get_caps(struct stmmac_priv *priv)
-{
-       priv->phylink_config.mac_capabilities |= MAC_2500FD | MAC_5000FD |
-                                                MAC_10000FD | MAC_25000FD |
-                                                MAC_40000FD | MAC_50000FD |
-                                                MAC_100000FD;
-}
-
 static void dwxgmac2_set_mac(void __iomem *ioaddr, bool enable)
 {
        u32 tx = readl(ioaddr + XGMAC_TX_CONFIG);
@@ -1591,7 +1583,6 @@ static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *
 
 const struct stmmac_ops dwxgmac210_ops = {
        .core_init = dwxgmac2_core_init,
-       .phylink_get_caps = xgmac_phylink_get_caps,
        .set_mac = dwxgmac2_set_mac,
        .rx_ipc = dwxgmac2_rx_ipc,
        .rx_queue_enable = dwxgmac2_rx_queue_enable,
@@ -1653,7 +1644,6 @@ static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
 
 const struct stmmac_ops dwxlgmac2_ops = {
        .core_init = dwxgmac2_core_init,
-       .phylink_get_caps = xgmac_phylink_get_caps,
        .set_mac = dwxgmac2_set_mac,
        .rx_ipc = dwxgmac2_rx_ipc,
        .rx_queue_enable = dwxlgmac2_rx_queue_enable,
@@ -1714,6 +1704,9 @@ int dwxgmac2_setup(struct stmmac_priv *priv)
        if (mac->multicast_filter_bins)
                mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
+       mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+                        MAC_1000FD | MAC_2500FD | MAC_5000FD |
+                        MAC_10000FD;
        mac->link.duplex = 0;
        mac->link.speed10 = XGMAC_CONFIG_SS_10_MII;
        mac->link.speed100 = XGMAC_CONFIG_SS_100_MII;
@@ -1751,6 +1744,11 @@ int dwxlgmac2_setup(struct stmmac_priv *priv)
        if (mac->multicast_filter_bins)
                mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
+       mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+                        MAC_1000FD | MAC_2500FD | MAC_5000FD |
+                        MAC_10000FD | MAC_25000FD |
+                        MAC_40000FD | MAC_50000FD |
+                        MAC_100000FD;
        mac->link.duplex = 0;
        mac->link.speed1000 = XLGMAC_CONFIG_SS_1000;
        mac->link.speed2500 = XLGMAC_CONFIG_SS_2500;
index 2479e9a5f9d22aada29b5e51487e91cfa626a631..19c58ad8df3457e7f42dd2d2801db088f8c42adc 100644 (file)
@@ -1225,12 +1225,11 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
                xpcs_get_interfaces(priv->hw->xpcs,
                                    priv->phylink_config.supported_interfaces);
 
-       priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-                                               MAC_10 | MAC_100 | MAC_1000;
-
        /* Get the MAC specific capabilities */
        stmmac_mac_phylink_get_caps(priv);
 
+       priv->phylink_config.mac_capabilities = priv->hw->link.caps;
+
        max_speed = priv->plat->max_speed;
        if (max_speed)
                phylink_limit_mac_speed(&priv->phylink_config, max_speed);
@@ -7186,6 +7185,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 
        stmmac_mac_phylink_get_caps(priv);
 
+       priv->phylink_config.mac_capabilities = priv->hw->link.caps;
+
        max_speed = priv->plat->max_speed;
        if (max_speed)
                phylink_limit_mac_speed(&priv->phylink_config, max_speed);