A debug message listing the command (and possible arguments) received
from the BIND 10 control system by the IPv6 DHCP server.
+% DHCP6_CONFIG_COMPLETE DHCPv6 server has completed configuration: %1
+This is an informational message announcing the successful processing of a
+new configuration. it is output during server startup, and when an updated
+configuration is committed by the administrator. Additional information
+may be provided.
+
+% DHCP6_CONFIG_LOAD_FAIL failed to load configuration: %1
+This critical error message indicates that the initial DHCPv6
+configuration has failed. The server will start, but nothing will be
+served until the configuration has been corrected.
+
+% DHCP6_CONFIG_NEW_SUBNET a new subnet has been added to configuration: %1
+This is an informational message reporting that the configuration has
+been extended to include the specified subnet.
+
+% DHCP6_CONFIG_OPTION_DUPLICATE multiple options with the code: %1 added to the subnet: %2
+This warning message is issued on attempt to configure multiple options with the
+same option code for the particular subnet. Adding multiple options is uncommon
+for DHCPv6, yet it is not prohibited.
+
+% DHCP6_CONFIG_START DHCPv6 server is processing the following configuration: %1
+This is a debug message that is issued every time the server receives a
+configuration. That happens start up and also when a server configuration
+change is committed by the administrator.
+
% DHCP6_CONFIG_UPDATE updated configuration received: %1
A debug message indicating that the IPv6 DHCP server has received an
updated configuration from the BIND 10 configuration system.
It indicates what database backend type is being to store lease and
other information.
-% DHCP6_NOT_RUNNING IPv6 DHCP server is not running
-A warning message is issued when an attempt is made to shut down the
-IPv6 DHCP server but it is not running.
-
-% DHCP6_NO_INTERFACES failed to detect any network interfaces
-During startup the IPv6 DHCP server failed to detect any network
-interfaces and is therefore shutting down.
-
-% DHCP6_OPEN_SOCKET opening sockets on port %1
-A debug message issued during startup, this indicates that the IPv6 DHCP
-server is about to open sockets on the specified port.
-
% DHCP6_LEASE_ADVERT lease %1 advertised (client duid=%2, iaid=%3)
This debug message indicates that the server successfully advertised
a lease. It is up to the client to choose one server out of othe advertised
and continue allocation with that server. This is a normal behavior and
indicates successful operation.
-% DHCP6_LEASE_ALLOC lease %1 has been allocated (client duid=%2, iaid=%3)
-This debug message indicates that the server successfully granted (in
-response to client's REQUEST message) a lease. This is a normal behavior
-and incicates successful operation.
-
% DHCP6_LEASE_ADVERT_FAIL failed to advertise a lease for client duid=%1, iaid=%2
This message indicates that the server failed to advertise (in response to
received SOLICIT) a lease for a given client. There may be many reasons for
such failure. Each specific failure is logged in a separate log entry.
+% DHCP6_LEASE_ALLOC lease %1 has been allocated (client duid=%2, iaid=%3)
+This debug message indicates that the server successfully granted (in
+response to client's REQUEST message) a lease. This is a normal behavior
+and incicates successful operation.
+
% DHCP6_LEASE_ALLOC_FAIL failed to grant a lease for client duid=%1, iaid=%2
This message indicates that the server failed to grant (in response to
received REQUEST) a lease for a given client. There may be many reasons for
such failure. Each specific failure is logged in a separate log entry.
+% DHCP6_NOT_RUNNING IPv6 DHCP server is not running
+A warning message is issued when an attempt is made to shut down the
+IPv6 DHCP server but it is not running.
+
+% DHCP6_NO_INTERFACES failed to detect any network interfaces
+During startup the IPv6 DHCP server failed to detect any network
+interfaces and is therefore shutting down.
+
+% DHCP6_NO_SUBNET_DEF_OPT failed to find subnet for address %1 when adding default options
+This warning message indicates that when attempting to add default options
+to a response, the server found that it was not configured to support
+the subnet from which the DHCPv6 request was received. The packet has
+been ignored.
+
+% DHCP6_NO_SUBNET_REQ_OPT failed to find subnet for address %1 when adding requested options
+This warning message indicates that when attempting to add requested
+options to a response, the server found that it was not configured
+to support the subnet from which the DHCPv6 request was received.
+The packet has been ignored.
+
+% DHCP6_OPEN_SOCKET opening sockets on port %1
+A debug message issued during startup, this indicates that the IPv6 DHCP
+server is about to open sockets on the specified port.
+
% DHCP6_PACKET_PARSE_FAIL failed to parse incoming packet
The IPv6 DHCP server has received a packet that it is unable to interpret.
-% DHCP6_PACKET_RECEIVE_FAIL error on attempt to receive packet: %1
-The IPv6 DHCP server tried to receive a packet but an error
-occured during this attempt. The reason for the error is included in
-the message.
-
% DHCP6_PACKET_RECEIVED %1 packet received
A debug message noting that the server has received the specified type
of packet. Note that a packet marked as UNKNOWN may well be a valid
DHCP packet, just a type not expected by the server (e.g. it will report
a received OFFER packet as UNKNOWN).
+% DHCP6_PACKET_RECEIVE_FAIL error on attempt to receive packet: %1
+The IPv6 DHCP server tried to receive a packet but an error
+occured during this attempt. The reason for the error is included in
+the message.
+
% DHCP6_PACKET_SEND_FAIL failed to send DHCPv6 packet: %1
This error is output if the IPv6 DHCP server fails to send an assembled
DHCP message to a client. The reason for the error is included in the
to a misconfiguration of the server. The packet processing will continue, but
the response will only contain generic configuration parameters and no
addresses or prefixes.
-
-% DHCP6_NO_SUBNET_DEF_OPT failed to find subnet for address %1 when adding default options
-This warning message indicates that when attempting to add default options
-to a response, the server found that it was not configured to support
-the subnet from which the DHCPv6 request was received. The packet has
-been ignored.
-
-% DHCP6_NO_SUBNET_REQ_OPT failed to find subnet for address %1 when adding requested options
-This warning message indicates that when attempting to add requested
-options to a response, the server found that it was not configured
-to support the subnet from which the DHCPv6 request was received.
-The packet has been ignored.
-
-% DHCP6_CONFIG_LOAD_FAIL failed to load configuration: %1
-This critical error message indicates that the initial DHCPv6
-configuration has failed. The server will start, but nothing will be
-served until the configuration has been corrected.
-
-% DHCP6_CONFIG_START DHCPv6 server is processing the following configuration: %1
-This is a debug message that is issued every time the server receives a
-configuration. That happens start up and also when a server configuration
-change is committed by the administrator.
-
-% DHCP6_CONFIG_NEW_SUBNET a new subnet has been added to configuration: %1
-This is an informational message reporting that the configuration has
-been extended to include the specified subnet.
-
-% DHCP6_CONFIG_COMPLETE DHCPv6 server has completed configuration: %1
-This is an informational message announcing the successful processing of a
-new configuration. it is output during server startup, and when an updated
-configuration is committed by the administrator. Additional information
-may be provided.
-
-% DHCP6_CONFIG_OPTION_DUPLICATE multiple options with the code: %1 added to the subnet: %2
-This warning message is issued on attempt to configure multiple options with the
-same option code for the particular subnet. Adding multiple options is uncommon
-for DHCPv6, yet it is not prohibited.
projects / thirdparty / kea.git / commitdiff
