tests: tests: run stunnel for HTTPS and FTPS on dynamic ports

As stunnel is an external tool and it has no specific option to export
the actually used port number when asked to listen to 0, runtests
instead iterates over ten randomly picked high number ports and sticks
to the first one stunnel can listen to.

Closes #5267

diff --git a/tests/runtests.pl b/tests/runtests.pl
index b8d946a47ac87445ba3beed5530fb74160e39a60..e00e5433b0416f632d18f0658d8e3c61249f894a 100755 (executable)
--- a/tests/runtests.pl
+++ b/tests/runtests.pl
@@ -1623,41 +1623,52 @@ sub runhttpsserver {
     $flags .= "--ipv$ipvnum --proto $proto ";
     $flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
     $flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
-    $flags .= "--connect $HTTPPORT --accept $HTTPSPORT";
+    $flags .= "--connect $HTTPPORT";
 
-    my $cmd = "$perl $srcdir/secureserver.pl $flags";
-    my ($httpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
+    my $pid2;
+    my $pid3;
+    my $httpspid;
+    my $port = 24512; # start attempt
+    for (1 .. 10) {
+        $port += int(rand(600));
+        my $options = "$flags --accept $port";
 
-    if($httpspid <= 0 || !pidexists($httpspid)) {
-        # it is NOT alive
-        logmsg "RUN: failed to start the $srvrname server\n";
-        stopserver($server, "$pid2");
-        displaylogs($testnumcheck);
-        $doesntrun{$pidfile} = 1;
-        return(0,0);
-    }
+        my $cmd = "$perl $srcdir/secureserver.pl $options";
+        ($httpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
 
-    # Server is up. Verify that we can speak to it.
-    my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $HTTPSPORT);
-    if(!$pid3) {
-        logmsg "RUN: $srvrname server failed verification\n";
-        # failed to talk to it properly. Kill the server and return failure
-        stopserver($server, "$httpspid $pid2");
-        displaylogs($testnumcheck);
-        $doesntrun{$pidfile} = 1;
-        return (0,0);
+        if($httpspid <= 0 || !pidexists($httpspid)) {
+            # it is NOT alive
+            logmsg "RUN: failed to start the $srvrname server\n";
+            stopserver($server, "$pid2");
+            displaylogs($testnumcheck);
+            $doesntrun{$pidfile} = 1;
+            next;
+        }
+
+        # Server is up. Verify that we can speak to it.
+        $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
+        if(!$pid3) {
+            logmsg "RUN: $srvrname server failed verification\n";
+            # failed to talk to it properly. Kill the server and return failure
+            stopserver($server, "$httpspid $pid2");
+            displaylogs($testnumcheck);
+            $doesntrun{$pidfile} = 1;
+            next;
+        }
+        # we have a server!
+        last;
     }
     # Here pid3 is actually the pid returned by the unsecure-http server.
 
     $runcert{$server} = $certfile;
 
     if($verbose) {
-        logmsg "RUN: $srvrname server is now running PID $httpspid\n";
+        logmsg "RUN: $srvrname server is PID $httpspid port $port\n";
     }
 
     sleep(1);
 
-    return ($httpspid, $pid2);
+    return ($httpspid, $pid2, $port);
 }
 
 #######################################################################
@@ -1906,41 +1917,48 @@ sub runftpsserver {
     $flags .= "--ipv$ipvnum --proto $proto ";
     $flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
     $flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
-    $flags .= "--connect $FTPPORT --accept $FTPSPORT";
-
-    my $cmd = "$perl $srcdir/secureserver.pl $flags";
-    my ($ftpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
+    $flags .= "--connect $FTPPORT";
 
-    if($ftpspid <= 0 || !pidexists($ftpspid)) {
-        # it is NOT alive
-        logmsg "RUN: failed to start the $srvrname server\n";
-        stopserver($server, "$pid2");
-        displaylogs($testnumcheck);
-        $doesntrun{$pidfile} = 1;
-        return(0,0);
-    }
+    my $port = 26713;
+    my $pid2;
+    my $pid3;
+    my $ftpspid;
+    for (1 .. 10) {
+        $port += int(rand(700));
+        my $options = "$flags --accept $port";
+        my $cmd = "$perl $srcdir/secureserver.pl $options";
+        ($ftpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
+
+        if($ftpspid <= 0 || !pidexists($ftpspid)) {
+            # it is NOT alive
+            logmsg "RUN: failed to start the $srvrname server\n";
+            stopserver($server, "$pid2");
+            displaylogs($testnumcheck);
+            $doesntrun{$pidfile} = 1;
+            next;
+        }
 
-    # Server is up. Verify that we can speak to it.
-    my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $FTPSPORT);
-    if(!$pid3) {
-        logmsg "RUN: $srvrname server failed verification\n";
-        # failed to talk to it properly. Kill the server and return failure
-        stopserver($server, "$ftpspid $pid2");
-        displaylogs($testnumcheck);
-        $doesntrun{$pidfile} = 1;
-        return (0,0);
-    }
-    # Here pid3 is actually the pid returned by the unsecure-ftp server.
+        $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
+        if(!$pid3) {
+            logmsg "RUN: $srvrname server failed verification\n";
+            # failed to talk to it properly. Kill the server and return failure
+            stopserver($server, "$ftpspid $pid2");
+            displaylogs($testnumcheck);
+            $doesntrun{$pidfile} = 1;
+            next;
+        }
+        # Here pid3 is actually the pid returned by the unsecure-ftp server.
 
-    $runcert{$server} = $certfile;
+        $runcert{$server} = $certfile;
 
-    if($verbose) {
-        logmsg "RUN: $srvrname server is now running PID $ftpspid\n";
+        if($verbose) {
+            logmsg "RUN: $srvrname server is PID $ftpspid port $port\n";
+        }
+        last;
     }
-
     sleep(1);
 
-    return ($ftpspid, $pid2);
+    return ($ftpspid, $pid2, $port);
 }
 
 #######################################################################
@@ -3187,10 +3205,6 @@ sub checksystem {
 
     if($verbose) {
         logmsg "* Ports: ";
-        if($stunnel) {
-            logmsg sprintf("FTPS/%d ", $FTPSPORT);
-            logmsg sprintf("HTTPS/%d ", $HTTPSPORT);
-        }
         if($httptlssrv) {
             logmsg sprintf("HTTPTLS/%d ", $HTTPTLSPORT);
             if($has_ipv6) {
@@ -4735,7 +4749,8 @@ sub startservers {
                 $run{'ftp'}="$pid $pid2";
             }
             if(!$run{'ftps'}) {
-                ($pid, $pid2) = runftpsserver($verbose, "", $certfile);
+                ($pid, $pid2, $FTPSPORT) =
+                    runftpsserver($verbose, "", $certfile);
                 if($pid <= 0) {
                     return "failed starting FTPS server (stunnel)";
                 }
@@ -4770,7 +4785,8 @@ sub startservers {
                 $run{'http'}="$pid $pid2";
             }
             if(!$run{'https'}) {
-                ($pid, $pid2) = runhttpsserver($verbose, "", $certfile);
+                ($pid, $pid2, $HTTPSPORT) =
+                    runhttpsserver($verbose, "", $certfile);
                 if($pid <= 0) {
                     return "failed starting HTTPS server (stunnel)";
                 }
@@ -5415,8 +5431,6 @@ if ($gdbthis) {
 }
 
 $minport         = $base; # original base port number
-$HTTPSPORT       = $base++; # HTTPS (stunnel) server port
-$FTPSPORT        = $base++; # FTPS (stunnel) server port
 $HTTPTLSPORT     = $base++; # HTTP TLS (non-stunnel) server port
 $HTTPTLS6PORT    = $base++; # HTTP TLS (non-stunnel) IPv6 server port
 $HTTP2PORT       = $base++; # HTTP/2 port