ChangeLog, acconfig.h, config.h.in, configure, configure.in, l_stdlib.h:

  * configure.in: DECL_STDIO_0 with gcc under solaris.
  * include/l_stdlib.h: DECL_TOUPPER_0
  DECL_STRERROR_0
  * configure.in: Fix a bunch of implicit declarations for SunOS

bk: 38004495kZKEAaIopfnAH4IbnemsrA

diff --git a/ChangeLog b/ChangeLog
index 8b0484b0457d2771d77a263165ce2935a10b79d2..80744b23d2ee0bb85f4040ec344e1a8e518b1b96 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,12 @@
 1999-10-10  Harlan Stenn  <stenn@whimsy.udel.edu>
 
+       * configure.in: DECL_STDIO_0 with gcc under solaris.
+
+       * include/l_stdlib.h: DECL_TOUPPER_0
+       DECL_STRERROR_0
+
+       * configure.in: Fix a bunch of implicit declarations for SunOS
+
        * html/release.htm: cleanup - we still provide MD5.
        Reported by: Winslowe Lacesso <lacesso@cs.ubc.ca>
 

diff --git a/acconfig.h b/acconfig.h
index ade0feeaf17ba7825852073f3e79e105c93f49e7..5790e1e39d6efdecdcde71a5922a751cc8203cc5 100644 (file)
--- a/acconfig.h
+++ b/acconfig.h
@@ -450,3 +450,5 @@
 /* tolower()? */
 #undef DECL_TOLOWER_0
 
+/* toupper()? */
+#undef DECL_TOUPPER_0

diff --git a/config.h.in b/config.h.in
index 732c52a5b8e2c5aa1bbdecd7426e7201a651e83c..a2e9de3567b9a1f613edd6be9bcb1e85b1732e1e 100644 (file)
--- a/config.h.in
+++ b/config.h.in
@@ -495,6 +495,9 @@
 /* tolower()? */
 #undef DECL_TOLOWER_0
 
+/* toupper()? */
+#undef DECL_TOUPPER_0
+
 /* The number of bytes in a int.  */
 #undef SIZEOF_INT
 

diff --git a/configure b/configure
index be34843b2b3fc7d6ebe2152cf0e6431a4cfed88c..83b40caf03cc1f81d30b8c8a488b1889ec76e73a 100755 (executable)
--- a/configure
+++ b/configure
@@ -6593,10 +6593,22 @@ EOF
 
     cat >> confdefs.h <<\EOF
 #define DECL_IPC_0 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define DECL_MEMMOVE_0 1
 EOF
 
     cat >> confdefs.h <<\EOF
 #define DECL_MKTEMP_0 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define DECL_MKSTEMP_0 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define DECL_MRAND48_0 1
 EOF
 
     cat >> confdefs.h <<\EOF
@@ -6617,11 +6629,14 @@ EOF
 
     cat >> confdefs.h <<\EOF
 #define DECL_SIGVEC_0 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define DECL_SRAND48_0 1
 EOF
 
     case "`basename $ac_cv_prog_CC`" in
      acc*) ;;
-     gcc*) ;;
      *) cat >> confdefs.h <<\EOF
 #define DECL_STDIO_0 1
 EOF
@@ -6646,6 +6661,10 @@ EOF
 
     cat >> confdefs.h <<\EOF
 #define DECL_TOLOWER_0 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define DECL_TOUPPER_0 1
 EOF
 
     ;;
@@ -6727,7 +6746,7 @@ EOF
 esac
 
 echo $ac_n "checking if we should use a streams device for ifconfig""... $ac_c" 1>&6
-echo "configure:6731: checking if we should use a streams device for ifconfig" >&5
+echo "configure:6750: checking if we should use a streams device for ifconfig" >&5
 if eval "test \"\${ac_cv_var_use_streams_device_for_ifconfig+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6737,7 +6756,7 @@ fi
 echo "$ac_t""$ac_cv_var_use_streams_device_for_ifconfig" 1>&6
 
 echo $ac_n "checking if we need extra room for SO_RCVBUF""... $ac_c" 1>&6
-echo "configure:6741: checking if we need extra room for SO_RCVBUF" >&5
+echo "configure:6760: checking if we need extra room for SO_RCVBUF" >&5
 if eval "test \"\${ac_cv_var_rcvbuf_slop+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6759,7 +6778,7 @@ EOF
 esac
 
 echo $ac_n "checking if we will open the broadcast socket""... $ac_c" 1>&6
-echo "configure:6763: checking if we will open the broadcast socket" >&5
+echo "configure:6782: checking if we will open the broadcast socket" >&5
 if eval "test \"\${ac_cv_var_open_bcast_socket+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6784,7 +6803,7 @@ EOF
 esac
 
 echo $ac_n "checking if we want the HPUX version of FindConfig()""... $ac_c" 1>&6
-echo "configure:6788: checking if we want the HPUX version of FindConfig()" >&5
+echo "configure:6807: checking if we want the HPUX version of FindConfig()" >&5
 if eval "test \"\${ac_cv_var_hpux_findconfig+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6806,7 +6825,7 @@ EOF
 esac
 
 echo $ac_n "checking if process groups are set with -pid""... $ac_c" 1>&6
-echo "configure:6810: checking if process groups are set with -pid" >&5
+echo "configure:6829: checking if process groups are set with -pid" >&5
 if eval "test \"\${ac_cv_arg_setpgrp_negpid+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6842,7 +6861,7 @@ EOF
 esac
 
 echo $ac_n "checking if we need a ctty for F_SETOWN""... $ac_c" 1>&6
-echo "configure:6846: checking if we need a ctty for F_SETOWN" >&5
+echo "configure:6865: checking if we need a ctty for F_SETOWN" >&5
 if eval "test \"\${ac_cv_func_ctty_for_f_setown+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6872,7 +6891,7 @@ esac
 
 ntp_warning='GRONK'
 echo $ac_n "checking if we'll use clock_settime or settimeofday or stime""... $ac_c" 1>&6
-echo "configure:6876: checking if we'll use clock_settime or settimeofday or stime" >&5
+echo "configure:6895: checking if we'll use clock_settime or settimeofday or stime" >&5
 case "$ac_cv_func_clock_settime$ac_cv_func_settimeofday$ac_cv_func_stime" in
  yes*)
     ntp_warning=''
@@ -6901,7 +6920,7 @@ case "$ntp_warning" in
 esac
 
 echo $ac_n "checking if we have a losing syscall()""... $ac_c" 1>&6
-echo "configure:6905: checking if we have a losing syscall()" >&5
+echo "configure:6924: checking if we have a losing syscall()" >&5
 if eval "test \"\${ac_cv_var_syscall_bug+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6924,7 +6943,7 @@ EOF
 esac
 
 echo $ac_n "checking for Streams/TLI""... $ac_c" 1>&6
-echo "configure:6928: checking for Streams/TLI" >&5
+echo "configure:6947: checking for Streams/TLI" >&5
 if eval "test \"\${ac_cv_var_streams_tli+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6953,12 +6972,12 @@ EOF
 esac
 
 echo $ac_n "checking for SIGIO""... $ac_c" 1>&6
-echo "configure:6957: checking for SIGIO" >&5
+echo "configure:6976: checking for SIGIO" >&5
 if eval "test \"\${ac_cv_hdr_def_sigio+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6962 "configure"
+#line 6981 "configure"
 #include "confdefs.h"
 #include <signal.h>
 #ifdef SIGIO
@@ -6981,7 +7000,7 @@ fi
 echo "$ac_t""$ac_cv_hdr_def_sigio" 1>&6
 
 echo $ac_n "checking if we want to use signalled IO""... $ac_c" 1>&6
-echo "configure:6985: checking if we want to use signalled IO" >&5
+echo "configure:7004: checking if we want to use signalled IO" >&5
 if eval "test \"\${ac_cv_var_signalled_io+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7032,12 +7051,12 @@ EOF
 esac
 
 echo $ac_n "checking for SIGPOLL""... $ac_c" 1>&6
-echo "configure:7036: checking for SIGPOLL" >&5
+echo "configure:7055: checking for SIGPOLL" >&5
 if eval "test \"\${ac_cv_hdr_def_sigpoll+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7041 "configure"
+#line 7060 "configure"
 #include "confdefs.h"
 #include <signal.h>
 #ifdef SIGPOLL
@@ -7060,12 +7079,12 @@ fi
 echo "$ac_t""$ac_cv_hdr_def_sigpoll" 1>&6
 
 echo $ac_n "checking for SIGSYS""... $ac_c" 1>&6
-echo "configure:7064: checking for SIGSYS" >&5
+echo "configure:7083: checking for SIGSYS" >&5
 if eval "test \"\${ac_cv_hdr_def_sigsys+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7069 "configure"
+#line 7088 "configure"
 #include "confdefs.h"
 #include <signal.h>
 #ifdef SIGSYS
@@ -7088,7 +7107,7 @@ fi
 echo "$ac_t""$ac_cv_hdr_def_sigsys" 1>&6
 
 echo $ac_n "checking if we can use SIGPOLL for UDP I/O""... $ac_c" 1>&6
-echo "configure:7092: checking if we can use SIGPOLL for UDP I/O" >&5
+echo "configure:7111: checking if we can use SIGPOLL for UDP I/O" >&5
 if eval "test \"\${ac_cv_var_use_udp_sigpoll+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7143,7 +7162,7 @@ EOF
 esac
 
 echo $ac_n "checking if we can use SIGPOLL for TTY I/O""... $ac_c" 1>&6
-echo "configure:7147: checking if we can use SIGPOLL for TTY I/O" >&5
+echo "configure:7166: checking if we can use SIGPOLL for TTY I/O" >&5
 if eval "test \"\${ac_cv_var_use_tty_sigpoll+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7198,7 +7217,7 @@ EOF
 esac
 
 echo $ac_n "checking if nlist() values might require extra indirection""... $ac_c" 1>&6
-echo "configure:7202: checking if nlist() values might require extra indirection" >&5
+echo "configure:7221: checking if nlist() values might require extra indirection" >&5
 if eval "test \"\${ac_cv_var_nlist_extra_indirection+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7220,7 +7239,7 @@ EOF
 esac
 
 echo $ac_n "checking for a minimum recommended value of tickadj""... $ac_c" 1>&6
-echo "configure:7224: checking for a minimum recommended value of tickadj" >&5
+echo "configure:7243: checking for a minimum recommended value of tickadj" >&5
 if eval "test \"\${ac_cv_var_min_rec_tickadj+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7243,7 +7262,7 @@ EOF
 esac
 
 echo $ac_n "checking if the TTY code permits PARENB and IGNPAR""... $ac_c" 1>&6
-echo "configure:7247: checking if the TTY code permits PARENB and IGNPAR" >&5
+echo "configure:7266: checking if the TTY code permits PARENB and IGNPAR" >&5
 if eval "test \"\${ac_cv_var_no_parenb_ignpar+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7268,7 +7287,7 @@ EOF
 esac
 
 echo $ac_n "checking if we're including debugging code""... $ac_c" 1>&6
-echo "configure:7272: checking if we're including debugging code" >&5
+echo "configure:7291: checking if we're including debugging code" >&5
 # Check whether --enable-debugging or --disable-debugging was given.
 if test "${enable_debugging+set}" = set; then
   enableval="$enable_debugging"
@@ -7286,7 +7305,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for a the number of minutes in a DST adjustment""... $ac_c" 1>&6
-echo "configure:7290: checking for a the number of minutes in a DST adjustment" >&5
+echo "configure:7309: checking for a the number of minutes in a DST adjustment" >&5
 # Check whether --enable-dst_minutes or --disable-dst_minutes was given.
 if test "${enable_dst_minutes+set}" = set; then
   enableval="$enable_dst_minutes"
@@ -7302,7 +7321,7 @@ EOF
 echo "$ac_t""$ans" 1>&6
 
 echo $ac_n "checking if we have the tty_clk line discipline/streams module""... $ac_c" 1>&6
-echo "configure:7306: checking if we have the tty_clk line discipline/streams module" >&5
+echo "configure:7325: checking if we have the tty_clk line discipline/streams module" >&5
 if eval "test \"\${ac_cv_var_tty_clk+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7318,7 +7337,7 @@ EOF
 esac
 
 echo $ac_n "checking for the ppsclock streams module""... $ac_c" 1>&6
-echo "configure:7322: checking for the ppsclock streams module" >&5
+echo "configure:7341: checking for the ppsclock streams module" >&5
 if eval "test \"\${ac_cv_var_ppsclock+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7334,7 +7353,7 @@ EOF
 esac
 
 echo $ac_n "checking for kernel multicast support""... $ac_c" 1>&6
-echo "configure:7338: checking for kernel multicast support" >&5
+echo "configure:7357: checking for kernel multicast support" >&5
 if eval "test \"\${ac_cv_var_mcast+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7342,7 +7361,7 @@ else
   case "$target" in
    i386-sequent-sysv4) ;;
    *) cat > conftest.$ac_ext <<EOF
-#line 7346 "configure"
+#line 7365 "configure"
 #include "confdefs.h"
 #include <netinet/in.h>
 #ifdef IP_ADD_MEMBERSHIP
@@ -7369,7 +7388,7 @@ EOF
 esac
 
 echo $ac_n "checking availability of ntp_{adj,get}time()""... $ac_c" 1>&6
-echo "configure:7373: checking availability of ntp_{adj,get}time()" >&5
+echo "configure:7392: checking availability of ntp_{adj,get}time()" >&5
 if eval "test \"\${ac_cv_var_ntp_syscalls+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7383,7 +7402,7 @@ else
         ac_cv_var_ntp_syscalls=libc
         ;;
       *) cat > conftest.$ac_ext <<EOF
-#line 7387 "configure"
+#line 7406 "configure"
 #include "confdefs.h"
 #include <sys/syscall.h>
 #if defined(SYS_ntp_gettime) && defined(SYS_ntp_adjtime)
@@ -7423,12 +7442,12 @@ EOF
 esac
 
 echo $ac_n "checking if sys/timex.h has STA_FLL""... $ac_c" 1>&6
-echo "configure:7427: checking if sys/timex.h has STA_FLL" >&5
+echo "configure:7446: checking if sys/timex.h has STA_FLL" >&5
 if eval "test \"\${ac_cv_var_sta_fll+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7432 "configure"
+#line 7451 "configure"
 #include "confdefs.h"
 #include <sys/timex.h>
 #ifdef STA_FLL
@@ -7451,7 +7470,7 @@ fi
 echo "$ac_t""$ac_cv_var_sta_fll" 1>&6
 
 echo $ac_n "checking if we have kernel PLL support""... $ac_c" 1>&6
-echo "configure:7455: checking if we have kernel PLL support" >&5
+echo "configure:7474: checking if we have kernel PLL support" >&5
 if eval "test \"\${ac_cv_var_kernel_pll+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7475,7 +7494,7 @@ EOF
 esac
 
 echo $ac_n "checking if SIOCGIFCONF returns buffer size in the buffer""... $ac_c" 1>&6
-echo "configure:7479: checking if SIOCGIFCONF returns buffer size in the buffer" >&5
+echo "configure:7498: checking if SIOCGIFCONF returns buffer size in the buffer" >&5
 if eval "test \"\${ac_cv_var_size_returned_in_buffer+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7504,7 +7523,7 @@ esac
 
 
 echo $ac_n "checking if we want to use MD5 authentication""... $ac_c" 1>&6
-echo "configure:7508: checking if we want to use MD5 authentication" >&5
+echo "configure:7527: checking if we want to use MD5 authentication" >&5
 if eval "test \"\${ac_cv_var_use_md5+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7529,10 +7548,10 @@ esac
 
 # Check for ioctls TIOCGPPSEV
 echo $ac_n "checking ioctl TIOCGPPSEV""... $ac_c" 1>&6
-echo "configure:7533: checking ioctl TIOCGPPSEV" >&5
+echo "configure:7552: checking ioctl TIOCGPPSEV" >&5
 if test "$ac_cv_header_termios_h" = "yes"; then
     cat > conftest.$ac_ext <<EOF
-#line 7536 "configure"
+#line 7555 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef TIOCGPPSEV
@@ -7565,10 +7584,10 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Check for ioctls TIOCSPPS
 echo $ac_n "checking ioctl TIOCSPPS""... $ac_c" 1>&6
-echo "configure:7569: checking ioctl TIOCSPPS" >&5
+echo "configure:7588: checking ioctl TIOCSPPS" >&5
 if test "$ac_cv_header_termios_h" = "yes"; then
     cat > conftest.$ac_ext <<EOF
-#line 7572 "configure"
+#line 7591 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef TIOCSPPS
@@ -7600,10 +7619,10 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Check for ioctls CIOGETEV
 echo $ac_n "checking ioctl CIOGETEV""... $ac_c" 1>&6
-echo "configure:7604: checking ioctl CIOGETEV" >&5
+echo "configure:7623: checking ioctl CIOGETEV" >&5
 if test "$ac_cv_header_sys_ppsclock_h" = "yes"; then
     cat > conftest.$ac_ext <<EOF
-#line 7607 "configure"
+#line 7626 "configure"
 #include "confdefs.h"
 #include <sys/ppsclock.h>
 #ifdef CIOGETEV
@@ -7660,17 +7679,17 @@ esac
 # Check for ioctls TIOCGSERIAL, TIOCSSERIAL, ASYNC_PPS_CD_POS, ASYNC_PPS_CD_NEG
 ac_safe=`echo "linux/serial.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/serial.h""... $ac_c" 1>&6
-echo "configure:7664: checking for linux/serial.h" >&5
+echo "configure:7683: checking for linux/serial.h" >&5
 if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7669 "configure"
+#line 7688 "configure"
 #include "confdefs.h"
 #include <linux/serial.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7674: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7693: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7692,11 +7711,11 @@ else
 fi
 
 echo $ac_n "checking ioctl TIOCGSERIAL""... $ac_c" 1>&6
-echo "configure:7696: checking ioctl TIOCGSERIAL" >&5
+echo "configure:7715: checking ioctl TIOCGSERIAL" >&5
 case "$ac_cv_header_sys_ppsclock_h$ac_cv_header_linux_serial_h" in
   yesyes)
     cat > conftest.$ac_ext <<EOF
-#line 7700 "configure"
+#line 7719 "configure"
 #include "confdefs.h"
 #include <sys/time.h>
 typedef int u_int;
@@ -7743,7 +7762,7 @@ ntp_refclock=no
 
 # HPUX only, and by explicit request
 echo $ac_n "checking Datum/Bancomm bc635/VME interface""... $ac_c" 1>&6
-echo "configure:7747: checking Datum/Bancomm bc635/VME interface" >&5
+echo "configure:7766: checking Datum/Bancomm bc635/VME interface" >&5
 # Check whether --enable-BANCOMM or --disable-BANCOMM was given.
 if test "${enable_BANCOMM+set}" = set; then
   enableval="$enable_BANCOMM"
@@ -7767,7 +7786,7 @@ esac
 
 #HPUX only, and only by explicit request
 echo $ac_n "checking TrueTime GPS receiver/VME interface""... $ac_c" 1>&6
-echo "configure:7771: checking TrueTime GPS receiver/VME interface" >&5
+echo "configure:7790: checking TrueTime GPS receiver/VME interface" >&5
 # Check whether --enable-GPSVME or --disable-GPSVME was given.
 if test "${enable_GPSVME+set}" = set; then
   enableval="$enable_GPSVME"
@@ -7790,7 +7809,7 @@ case "$ntp_ok$target" in
 esac
 
 echo $ac_n "checking for PCL720 clock support""... $ac_c" 1>&6
-echo "configure:7794: checking for PCL720 clock support" >&5
+echo "configure:7813: checking for PCL720 clock support" >&5
 case "$ac_cv_header_machine_inline_h$ac_cv_header_sys_pcl720_h$ac_cv_header_sys_i8253_h" in
  yesyesyes)
     cat >> confdefs.h <<\EOF
@@ -7806,7 +7825,7 @@ esac
 echo "$ac_t""$ans" 1>&6
 
 echo $ac_n "checking for SHM clock attached thru shared memory""... $ac_c" 1>&6
-echo "configure:7810: checking for SHM clock attached thru shared memory" >&5
+echo "configure:7829: checking for SHM clock attached thru shared memory" >&5
 # Check whether --enable-SHM or --disable-SHM was given.
 if test "${enable_SHM+set}" = set; then
   enableval="$enable_SHM"
@@ -7825,7 +7844,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for default inclusion of all suitable non-PARSE clocks""... $ac_c" 1>&6
-echo "configure:7829: checking for default inclusion of all suitable non-PARSE clocks" >&5
+echo "configure:7848: checking for default inclusion of all suitable non-PARSE clocks" >&5
 # Check whether --enable-all-clocks or --disable-all-clocks was given.
 if test "${enable_all_clocks+set}" = set; then
   enableval="$enable_all_clocks"
@@ -7837,7 +7856,7 @@ fi
 echo "$ac_t""$ntp_eac" 1>&6
 
 echo $ac_n "checking if we have support for PARSE clocks""... $ac_c" 1>&6
-echo "configure:7841: checking if we have support for PARSE clocks" >&5
+echo "configure:7860: checking if we have support for PARSE clocks" >&5
 case "$ac_cv_header_termio_h$ac_cv_header_termios_h" in
  *yes*)
     ntp_canparse=yes
@@ -7849,14 +7868,14 @@ echo "$ac_t""$ntp_canparse" 1>&6
 
 # Requires modem control
 echo $ac_n "checking ACTS modem service""... $ac_c" 1>&6
-echo "configure:7853: checking ACTS modem service" >&5
+echo "configure:7872: checking ACTS modem service" >&5
 # Check whether --enable-ACTS or --disable-ACTS was given.
 if test "${enable_ACTS+set}" = set; then
   enableval="$enable_ACTS"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 7860 "configure"
+#line 7879 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -7889,7 +7908,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Arbiter 1088A/B GPS receiver""... $ac_c" 1>&6
-echo "configure:7893: checking Arbiter 1088A/B GPS receiver" >&5
+echo "configure:7912: checking Arbiter 1088A/B GPS receiver" >&5
 # Check whether --enable-ARBITER or --disable-ARBITER was given.
 if test "${enable_ARBITER+set}" = set; then
   enableval="$enable_ARBITER"
@@ -7908,7 +7927,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Arcron MSF receiver""... $ac_c" 1>&6
-echo "configure:7912: checking Arcron MSF receiver" >&5
+echo "configure:7931: checking Arcron MSF receiver" >&5
 # Check whether --enable-ARCRON_MSF or --disable-ARCRON_MSF was given.
 if test "${enable_ARCRON_MSF+set}" = set; then
   enableval="$enable_ARCRON_MSF"
@@ -7927,7 +7946,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Austron 2200A/2201A GPS receiver""... $ac_c" 1>&6
-echo "configure:7931: checking Austron 2200A/2201A GPS receiver" >&5
+echo "configure:7950: checking Austron 2200A/2201A GPS receiver" >&5
 # Check whether --enable-AS2201 or --disable-AS2201 was given.
 if test "${enable_AS2201+set}" = set; then
   enableval="$enable_AS2201"
@@ -7946,7 +7965,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking PPS interface""... $ac_c" 1>&6
-echo "configure:7950: checking PPS interface" >&5
+echo "configure:7969: checking PPS interface" >&5
 # Check whether --enable-ATOM or --disable-ATOM was given.
 if test "${enable_ATOM+set}" = set; then
   enableval="$enable_ATOM"
@@ -7965,7 +7984,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking CHU modem/decoder""... $ac_c" 1>&6
-echo "configure:7969: checking CHU modem/decoder" >&5
+echo "configure:7988: checking CHU modem/decoder" >&5
 # Check whether --enable-CHU or --disable-CHU was given.
 if test "${enable_CHU+set}" = set; then
   enableval="$enable_CHU"
@@ -7985,7 +8004,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 ac_refclock_chu=$ntp_ok
 
 echo $ac_n "checking CHU audio/decoder""... $ac_c" 1>&6
-echo "configure:7989: checking CHU audio/decoder" >&5
+echo "configure:8008: checking CHU audio/decoder" >&5
 # Check whether --enable-AUDIO-CHU or --disable-AUDIO-CHU was given.
 if test "${enable_AUDIO_CHU+set}" = set; then
   enableval="$enable_AUDIO_CHU"
@@ -8009,7 +8028,7 @@ esac
 
 # Not under HP-UX
 echo $ac_n "checking Datum Programmable Time System""... $ac_c" 1>&6
-echo "configure:8013: checking Datum Programmable Time System" >&5
+echo "configure:8032: checking Datum Programmable Time System" >&5
 # Check whether --enable-DATUM or --disable-DATUM was given.
 if test "${enable_DATUM+set}" = set; then
   enableval="$enable_DATUM"
@@ -8035,14 +8054,14 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Requires modem control
 echo $ac_n "checking Heath GC-1000 WWV/WWVH receiver""... $ac_c" 1>&6
-echo "configure:8039: checking Heath GC-1000 WWV/WWVH receiver" >&5
+echo "configure:8058: checking Heath GC-1000 WWV/WWVH receiver" >&5
 # Check whether --enable-HEATH or --disable-HEATH was given.
 if test "${enable_HEATH+set}" = set; then
   enableval="$enable_HEATH"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 8046 "configure"
+#line 8065 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -8075,7 +8094,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking HP 58503A GPS receiver""... $ac_c" 1>&6
-echo "configure:8079: checking HP 58503A GPS receiver" >&5
+echo "configure:8098: checking HP 58503A GPS receiver" >&5
 # Check whether --enable-HPGPS or --disable-HPGPS was given.
 if test "${enable_HPGPS+set}" = set; then
   enableval="$enable_HPGPS"
@@ -8094,7 +8113,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Sun IRIG audio decoder""... $ac_c" 1>&6
-echo "configure:8098: checking Sun IRIG audio decoder" >&5
+echo "configure:8117: checking Sun IRIG audio decoder" >&5
 # Check whether --enable-IRIG or --disable-IRIG was given.
 if test "${enable_IRIG+set}" = set; then
   enableval="$enable_IRIG"
@@ -8122,7 +8141,7 @@ case "$ntp_ok$ac_cv_header_sun_audioio_h$ac_cv_header_sys_audioio_h" in
 esac
 
 echo $ac_n "checking Leitch CSD 5300 Master Clock System Driver""... $ac_c" 1>&6
-echo "configure:8126: checking Leitch CSD 5300 Master Clock System Driver" >&5
+echo "configure:8145: checking Leitch CSD 5300 Master Clock System Driver" >&5
 # Check whether --enable-LEITCH or --disable-LEITCH was given.
 if test "${enable_LEITCH+set}" = set; then
   enableval="$enable_LEITCH"
@@ -8141,7 +8160,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking local clock reference""... $ac_c" 1>&6
-echo "configure:8145: checking local clock reference" >&5
+echo "configure:8164: checking local clock reference" >&5
 # Check whether --enable-LOCAL-CLOCK or --disable-LOCAL-CLOCK was given.
 if test "${enable_LOCAL_CLOCK+set}" = set; then
   enableval="$enable_LOCAL_CLOCK"
@@ -8160,7 +8179,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking EES M201 MSF receiver""... $ac_c" 1>&6
-echo "configure:8164: checking EES M201 MSF receiver" >&5
+echo "configure:8183: checking EES M201 MSF receiver" >&5
 # Check whether --enable-MSFEES or --disable-MSFEES was given.
 if test "${enable_MSFEES+set}" = set; then
   enableval="$enable_MSFEES"
@@ -8180,7 +8199,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Not Ultrix
 echo $ac_n "checking Magnavox MX4200 GPS receiver""... $ac_c" 1>&6
-echo "configure:8184: checking Magnavox MX4200 GPS receiver" >&5
+echo "configure:8203: checking Magnavox MX4200 GPS receiver" >&5
 # Check whether --enable-MX4200 or --disable-MX4200 was given.
 if test "${enable_MX4200+set}" = set; then
   enableval="$enable_MX4200"
@@ -8207,7 +8226,7 @@ case "$ntp_ok$target" in
 esac
 
 echo $ac_n "checking NMEA GPS receiver""... $ac_c" 1>&6
-echo "configure:8211: checking NMEA GPS receiver" >&5
+echo "configure:8230: checking NMEA GPS receiver" >&5
 # Check whether --enable-NMEA or --disable-NMEA was given.
 if test "${enable_NMEA+set}" = set; then
   enableval="$enable_NMEA"
@@ -8226,7 +8245,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for ONCORE Motorola VP/UT Oncore GPS""... $ac_c" 1>&6
-echo "configure:8230: checking for ONCORE Motorola VP/UT Oncore GPS" >&5
+echo "configure:8249: checking for ONCORE Motorola VP/UT Oncore GPS" >&5
 # Check whether --enable-ONCORE or --disable-ONCORE was given.
 if test "${enable_ONCORE+set}" = set; then
   enableval="$enable_ONCORE"
@@ -8248,7 +8267,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for Palisade clock""... $ac_c" 1>&6
-echo "configure:8252: checking for Palisade clock" >&5
+echo "configure:8271: checking for Palisade clock" >&5
 # Check whether --enable-PALISADE or --disable-PALISADE was given.
 if test "${enable_PALISADE+set}" = set; then
   enableval="$enable_PALISADE"
@@ -8274,7 +8293,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking PST/Traconex 1020 WWV/WWVH receiver""... $ac_c" 1>&6
-echo "configure:8278: checking PST/Traconex 1020 WWV/WWVH receiver" >&5
+echo "configure:8297: checking PST/Traconex 1020 WWV/WWVH receiver" >&5
 # Check whether --enable-PST or --disable-PST was given.
 if test "${enable_PST+set}" = set; then
   enableval="$enable_PST"
@@ -8294,7 +8313,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Not Ultrix
 echo $ac_n "checking Rockwell Jupiter GPS receiver""... $ac_c" 1>&6
-echo "configure:8298: checking Rockwell Jupiter GPS receiver" >&5
+echo "configure:8317: checking Rockwell Jupiter GPS receiver" >&5
 # Check whether --enable-JUPITER or --disable-JUPITER was given.
 if test "${enable_JUPITER+set}" = set; then
   enableval="$enable_JUPITER"
@@ -8322,14 +8341,14 @@ esac
 
 # Requires modem control
 echo $ac_n "checking PTB modem service""... $ac_c" 1>&6
-echo "configure:8326: checking PTB modem service" >&5
+echo "configure:8345: checking PTB modem service" >&5
 # Check whether --enable-PTBACTS or --disable-PTBACTS was given.
 if test "${enable_PTBACTS+set}" = set; then
   enableval="$enable_PTBACTS"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 8333 "configure"
+#line 8352 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -8362,7 +8381,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking KSI/Odetics TPRO/S GPS receiver/IRIG interface""... $ac_c" 1>&6
-echo "configure:8366: checking KSI/Odetics TPRO/S GPS receiver/IRIG interface" >&5
+echo "configure:8385: checking KSI/Odetics TPRO/S GPS receiver/IRIG interface" >&5
 # Check whether --enable-TPRO or --disable-TPRO was given.
 if test "${enable_TPRO+set}" = set; then
   enableval="$enable_TPRO"
@@ -8390,7 +8409,7 @@ case "$ntp_ok$ac_cv_header_sys_tpro" in
 esac
 
 echo $ac_n "checking TRAK 8810 GPS receiver""... $ac_c" 1>&6
-echo "configure:8394: checking TRAK 8810 GPS receiver" >&5
+echo "configure:8413: checking TRAK 8810 GPS receiver" >&5
 # Check whether --enable-TRAK or --disable-TRAK was given.
 if test "${enable_TRAK+set}" = set; then
   enableval="$enable_TRAK"
@@ -8409,7 +8428,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Chrono-log K-series WWVB receiver""... $ac_c" 1>&6
-echo "configure:8413: checking Chrono-log K-series WWVB receiver" >&5
+echo "configure:8432: checking Chrono-log K-series WWVB receiver" >&5
 # Check whether --enable-CHRONOLOG or --disable-CHRONOLOG was given.
 if test "${enable_CHRONOLOG+set}" = set; then
   enableval="$enable_CHRONOLOG"
@@ -8428,7 +8447,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Dumb generic hh:mm:ss local clock""... $ac_c" 1>&6
-echo "configure:8432: checking Dumb generic hh:mm:ss local clock" >&5
+echo "configure:8451: checking Dumb generic hh:mm:ss local clock" >&5
 # Check whether --enable-DUMBCLOCK or --disable-DUMBCLOCK was given.
 if test "${enable_DUMBCLOCK+set}" = set; then
   enableval="$enable_DUMBCLOCK"
@@ -8448,7 +8467,7 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Not on a vax-dec-bsd
 echo $ac_n "checking Kinemetrics/TrueTime receivers""... $ac_c" 1>&6
-echo "configure:8452: checking Kinemetrics/TrueTime receivers" >&5
+echo "configure:8471: checking Kinemetrics/TrueTime receivers" >&5
 # Check whether --enable-TRUETIME or --disable-TRUETIME was given.
 if test "${enable_TRUETIME+set}" = set; then
   enableval="$enable_TRUETIME"
@@ -8477,7 +8496,7 @@ case "$ntp_ok$target" in
 esac
 
 echo $ac_n "checking Spectracom 8170/Netclock/2 WWVB receiver""... $ac_c" 1>&6
-echo "configure:8481: checking Spectracom 8170/Netclock/2 WWVB receiver" >&5
+echo "configure:8500: checking Spectracom 8170/Netclock/2 WWVB receiver" >&5
 # Check whether --enable-WWVB or --disable-WWVB was given.
 if test "${enable_WWVB+set}" = set; then
   enableval="$enable_WWVB"
@@ -8496,7 +8515,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking Ultralink M320 WWVB receiver""... $ac_c" 1>&6
-echo "configure:8500: checking Ultralink M320 WWVB receiver" >&5
+echo "configure:8519: checking Ultralink M320 WWVB receiver" >&5
 # Check whether --enable-ULINK or --disable-ULINK was given.
 if test "${enable_ULINK+set}" = set; then
   enableval="$enable_ULINK"
@@ -8516,14 +8535,14 @@ echo "$ac_t""$ntp_ok" 1>&6
 
 # Requires modem control
 echo $ac_n "checking USNO modem service""... $ac_c" 1>&6
-echo "configure:8520: checking USNO modem service" >&5
+echo "configure:8539: checking USNO modem service" >&5
 # Check whether --enable-USNO or --disable-USNO was given.
 if test "${enable_USNO+set}" = set; then
   enableval="$enable_USNO"
   ntp_ok=$enableval
 else
   cat > conftest.$ac_ext <<EOF
-#line 8527 "configure"
+#line 8546 "configure"
 #include "confdefs.h"
 #include <termios.h>
 #ifdef HAVE_SYS_IOCTL_H
@@ -8556,7 +8575,7 @@ fi
 echo "$ac_t""$ntp_ok" 1>&6
 
 echo $ac_n "checking for default inclusion of all suitable PARSE clocks""... $ac_c" 1>&6
-echo "configure:8560: checking for default inclusion of all suitable PARSE clocks" >&5
+echo "configure:8579: checking for default inclusion of all suitable PARSE clocks" >&5
 # Check whether --enable-parse-clocks or --disable-parse-clocks was given.
 if test "${enable_parse_clocks+set}" = set; then
   enableval="$enable_parse_clocks"
@@ -8586,7 +8605,7 @@ ntp_parseutil=no
 ntp_rawdcf=no
 
 echo $ac_n "checking Diem Computime Radio Clock""... $ac_c" 1>&6
-echo "configure:8590: checking Diem Computime Radio Clock" >&5
+echo "configure:8609: checking Diem Computime Radio Clock" >&5
 # Check whether --enable-COMPUTIME or --disable-COMPUTIME was given.
 if test "${enable_COMPUTIME+set}" = set; then
   enableval="$enable_COMPUTIME"
@@ -8611,7 +8630,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking ELV/DCF7000 clock""... $ac_c" 1>&6
-echo "configure:8615: checking ELV/DCF7000 clock" >&5
+echo "configure:8634: checking ELV/DCF7000 clock" >&5
 # Check whether --enable-DCF7000 or --disable-DCF7000 was given.
 if test "${enable_DCF7000+set}" = set; then
   enableval="$enable_DCF7000"
@@ -8636,7 +8655,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking HOPF 6021 clock""... $ac_c" 1>&6
-echo "configure:8640: checking HOPF 6021 clock" >&5
+echo "configure:8659: checking HOPF 6021 clock" >&5
 # Check whether --enable-HOPF6021 or --disable-HOPF6021 was given.
 if test "${enable_HOPF6021+set}" = set; then
   enableval="$enable_HOPF6021"
@@ -8661,7 +8680,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Meinberg clocks""... $ac_c" 1>&6
-echo "configure:8665: checking Meinberg clocks" >&5
+echo "configure:8684: checking Meinberg clocks" >&5
 # Check whether --enable-MEINBERG or --disable-MEINBERG was given.
 if test "${enable_MEINBERG+set}" = set; then
   enableval="$enable_MEINBERG"
@@ -8686,7 +8705,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking DCF77 raw time code""... $ac_c" 1>&6
-echo "configure:8690: checking DCF77 raw time code" >&5
+echo "configure:8709: checking DCF77 raw time code" >&5
 # Check whether --enable-RAWDCF or --disable-RAWDCF was given.
 if test "${enable_RAWDCF+set}" = set; then
   enableval="$enable_RAWDCF"
@@ -8715,7 +8734,7 @@ esac
 case "$ntp_rawdcf" in
  yes)
     echo $ac_n "checking if we must enable parity for RAWDCF""... $ac_c" 1>&6
-echo "configure:8719: checking if we must enable parity for RAWDCF" >&5
+echo "configure:8738: checking if we must enable parity for RAWDCF" >&5
 if eval "test \"\${ac_cv_var_rawdcf_parity+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8743,7 +8762,7 @@ EOF
 esac
 
 echo $ac_n "checking RCC 8000 clock""... $ac_c" 1>&6
-echo "configure:8747: checking RCC 8000 clock" >&5
+echo "configure:8766: checking RCC 8000 clock" >&5
 # Check whether --enable-RCC8000 or --disable-RCC8000 was given.
 if test "${enable_RCC8000+set}" = set; then
   enableval="$enable_RCC8000"
@@ -8768,7 +8787,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Schmid DCF77 clock""... $ac_c" 1>&6
-echo "configure:8772: checking Schmid DCF77 clock" >&5
+echo "configure:8791: checking Schmid DCF77 clock" >&5
 # Check whether --enable-SCHMID or --disable-SCHMID was given.
 if test "${enable_SCHMID+set}" = set; then
   enableval="$enable_SCHMID"
@@ -8793,7 +8812,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Trimble GPS receiver/TAIP protocol""... $ac_c" 1>&6
-echo "configure:8797: checking Trimble GPS receiver/TAIP protocol" >&5
+echo "configure:8816: checking Trimble GPS receiver/TAIP protocol" >&5
 # Check whether --enable-TRIMTAIP or --disable-TRIMTAIP was given.
 if test "${enable_TRIMTAIP+set}" = set; then
   enableval="$enable_TRIMTAIP"
@@ -8818,7 +8837,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking Trimble GPS receiver/TSIP protocol""... $ac_c" 1>&6
-echo "configure:8822: checking Trimble GPS receiver/TSIP protocol" >&5
+echo "configure:8841: checking Trimble GPS receiver/TSIP protocol" >&5
 # Check whether --enable-TRIMTSIP or --disable-TRIMTSIP was given.
 if test "${enable_TRIMTSIP+set}" = set; then
   enableval="$enable_TRIMTSIP"
@@ -8843,7 +8862,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking WHARTON 400A Series clock""... $ac_c" 1>&6
-echo "configure:8847: checking WHARTON 400A Series clock" >&5
+echo "configure:8866: checking WHARTON 400A Series clock" >&5
 # Check whether --enable-WHARTON or --disable-WHARTON was given.
 if test "${enable_WHARTON+set}" = set; then
   enableval="$enable_WHARTON"
@@ -8868,7 +8887,7 @@ case "$ntp_ok$ntp_canparse" in
 esac
 
 echo $ac_n "checking VARITEXT clock""... $ac_c" 1>&6
-echo "configure:8872: checking VARITEXT clock" >&5
+echo "configure:8891: checking VARITEXT clock" >&5
 # Check whether --enable-VARITEXT or --disable-VARITEXT was given.
 if test "${enable_VARITEXT+set}" = set; then
   enableval="$enable_VARITEXT"
@@ -8896,7 +8915,7 @@ esac
 
 
 echo $ac_n "checking if we need to make and use the parse libraries""... $ac_c" 1>&6
-echo "configure:8900: checking if we need to make and use the parse libraries" >&5
+echo "configure:8919: checking if we need to make and use the parse libraries" >&5
 ans=no
 case "$ntp_libparse" in
  yes)
@@ -8924,7 +8943,7 @@ echo "$ac_t""$ans" 1>&6
 
 
 echo $ac_n "checking if we need to make and use the RSAREF library""... $ac_c" 1>&6
-echo "configure:8928: checking if we need to make and use the RSAREF library" >&5
+echo "configure:8947: checking if we need to make and use the RSAREF library" >&5
 ans=no
 if test -f $srcdir/rsaref2/source/rsa.c
 then
@@ -8942,7 +8961,7 @@ echo "$ac_t""$ans" 1>&6
 
 
 echo $ac_n "checking if we can make dcf parse utilities""... $ac_c" 1>&6
-echo "configure:8946: checking if we can make dcf parse utilities" >&5
+echo "configure:8965: checking if we can make dcf parse utilities" >&5
 ans=no
 if test "$ntp_parseutil" = "yes"; then
     case "$target" in
@@ -8957,7 +8976,7 @@ echo "$ac_t""$ans" 1>&6
 
 
 echo $ac_n "checking if we can build kernel streams modules for parse""... $ac_c" 1>&6
-echo "configure:8961: checking if we can build kernel streams modules for parse" >&5
+echo "configure:8980: checking if we can build kernel streams modules for parse" >&5
 ans=no
 case "$ntp_parseutil$ac_cv_header_sys_stropts_h" in
  yesyes)
@@ -8984,7 +9003,7 @@ esac
 echo "$ac_t""$ans" 1>&6
 
 echo $ac_n "checking if we need basic refclock support""... $ac_c" 1>&6
-echo "configure:8988: checking if we need basic refclock support" >&5
+echo "configure:9007: checking if we need basic refclock support" >&5
 if test "$ntp_refclock" = "yes"; then
     cat >> confdefs.h <<\EOF
 #define REFCLOCK 1
@@ -8996,7 +9015,7 @@ echo "$ac_t""$ntp_refclock" 1>&6
                        
 
 echo $ac_n "checking if we want HP-UX adjtimed support""... $ac_c" 1>&6
-echo "configure:9000: checking if we want HP-UX adjtimed support" >&5
+echo "configure:9019: checking if we want HP-UX adjtimed support" >&5
 case "$target" in
  *-*-hpux[56789]*)
     ans=yes
@@ -9014,7 +9033,7 @@ fi
 echo "$ac_t""$ans" 1>&6
 
 echo $ac_n "checking if we can read kmem""... $ac_c" 1>&6
-echo "configure:9018: checking if we can read kmem" >&5
+echo "configure:9037: checking if we can read kmem" >&5
 if eval "test \"\${ac_cv_var_can_kmem+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9067,7 +9086,7 @@ EOF
 esac
 
 echo $ac_n "checking if adjtime is accurate""... $ac_c" 1>&6
-echo "configure:9071: checking if adjtime is accurate" >&5
+echo "configure:9090: checking if adjtime is accurate" >&5
 if eval "test \"\${ac_cv_var_adjtime_is_accurate+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9119,7 +9138,7 @@ EOF
 esac
 
 echo $ac_n "checking the name of 'tick' in the kernel""... $ac_c" 1>&6
-echo "configure:9123: checking the name of 'tick' in the kernel" >&5
+echo "configure:9142: checking the name of 'tick' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_tick+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9163,7 +9182,7 @@ EOF
 esac
 #
 echo $ac_n "checking for the units of 'tick'""... $ac_c" 1>&6
-echo "configure:9167: checking for the units of 'tick'" >&5
+echo "configure:9186: checking for the units of 'tick'" >&5
 if eval "test \"\${ac_cv_var_tick_nano+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9187,7 +9206,7 @@ EOF
 esac
 #
 echo $ac_n "checking the name of 'tickadj' in the kernel""... $ac_c" 1>&6
-echo "configure:9191: checking the name of 'tickadj' in the kernel" >&5
+echo "configure:9210: checking the name of 'tickadj' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_tickadj+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9240,7 +9259,7 @@ EOF
 esac
 #
 echo $ac_n "checking for the units of 'tickadj'""... $ac_c" 1>&6
-echo "configure:9244: checking for the units of 'tickadj'" >&5
+echo "configure:9263: checking for the units of 'tickadj'" >&5
 if eval "test \"\${ac_cv_var_tickadj_nano+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9264,7 +9283,7 @@ EOF
 esac
 #
 echo $ac_n "checking half-heartedly for 'dosynctodr' in the kernel""... $ac_c" 1>&6
-echo "configure:9268: checking half-heartedly for 'dosynctodr' in the kernel" >&5
+echo "configure:9287: checking half-heartedly for 'dosynctodr' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_dosynctodr+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9317,7 +9336,7 @@ EOF
 esac
 #
 echo $ac_n "checking half-heartedly for 'noprintf' in the kernel""... $ac_c" 1>&6
-echo "configure:9321: checking half-heartedly for 'noprintf' in the kernel" >&5
+echo "configure:9340: checking half-heartedly for 'noprintf' in the kernel" >&5
 if eval "test \"\${ac_cv_var_nlist_noprintf+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9367,7 +9386,7 @@ esac
 
 
 echo $ac_n "checking for a default value for 'tick'""... $ac_c" 1>&6
-echo "configure:9371: checking for a default value for 'tick'" >&5
+echo "configure:9390: checking for a default value for 'tick'" >&5
 if eval "test \"\${ac_cv_var_tick+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9411,7 +9430,7 @@ EOF
 esac
 
 echo $ac_n "checking for a default value for 'tickadj'""... $ac_c" 1>&6
-echo "configure:9415: checking for a default value for 'tickadj'" >&5
+echo "configure:9434: checking for a default value for 'tickadj'" >&5
 if eval "test \"\${ac_cv_var_tickadj+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9537,7 +9556,7 @@ esac
 
 
 echo $ac_n "checking if we want and can make the tickadj utility""... $ac_c" 1>&6
-echo "configure:9541: checking if we want and can make the tickadj utility" >&5
+echo "configure:9560: checking if we want and can make the tickadj utility" >&5
 if eval "test \"\${ac_cv_make_tickadj+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9553,7 +9572,7 @@ esac
 
 
 echo $ac_n "checking if we want and can make the ntptime utility""... $ac_c" 1>&6
-echo "configure:9557: checking if we want and can make the ntptime utility" >&5
+echo "configure:9576: checking if we want and can make the ntptime utility" >&5
 if eval "test \"\${ac_cv_make_ntptime+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9582,7 +9601,7 @@ case "$ac_cv_make_ntptime" in
 esac
 
 echo $ac_n "checking if we want UDP wildcard delivery""... $ac_c" 1>&6
-echo "configure:9586: checking if we want UDP wildcard delivery" >&5
+echo "configure:9605: checking if we want UDP wildcard delivery" >&5
 if eval "test \"\${ac_cv_var_udp_wildcard_delivery+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9661,7 +9680,7 @@ case "$host" in
 esac
 
 echo $ac_n "checking if we should always slew the time""... $ac_c" 1>&6
-echo "configure:9665: checking if we should always slew the time" >&5
+echo "configure:9684: checking if we should always slew the time" >&5
 if eval "test \"\${ac_cv_var_slew_always+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9701,7 +9720,7 @@ EOF
 esac
 
 echo $ac_n "checking if we should step and slew the time""... $ac_c" 1>&6
-echo "configure:9705: checking if we should step and slew the time" >&5
+echo "configure:9724: checking if we should step and slew the time" >&5
 if eval "test \"\${ac_cv_var_step_slew+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9744,7 +9763,7 @@ EOF
 esac
 
 echo $ac_n "checking if ntpdate should step the time""... $ac_c" 1>&6
-echo "configure:9748: checking if ntpdate should step the time" >&5
+echo "configure:9767: checking if ntpdate should step the time" >&5
 if eval "test \"\${ac_cv_var_ntpdate_step+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9775,7 +9794,7 @@ EOF
 esac
 
 echo $ac_n "checking if we should sync TODR clock every hour""... $ac_c" 1>&6
-echo "configure:9779: checking if we should sync TODR clock every hour" >&5
+echo "configure:9798: checking if we should sync TODR clock every hour" >&5
 if eval "test \"\${ac_cv_var_sync_todr+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9808,7 +9827,7 @@ EOF
 esac
 
 echo $ac_n "checking if we should avoid kernel FLL bug""... $ac_c" 1>&6
-echo "configure:9812: checking if we should avoid kernel FLL bug" >&5
+echo "configure:9831: checking if we should avoid kernel FLL bug" >&5
 if eval "test \"\${ac_cv_var_kernel_fll_bug+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else

diff --git a/configure.in b/configure.in
index 49aeeb73870b2787b5c9585da81e3efe06a137dc..64ec729ee08dc00796b46212f4ac5797af5ca6af 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -784,15 +784,18 @@ case "$target" in
     AC_DEFINE(DECL_BZERO_0)
     AC_DEFINE(DECL_IOCTL_0)
     AC_DEFINE(DECL_IPC_0)
+    AC_DEFINE(DECL_MEMMOVE_0)
     AC_DEFINE(DECL_MKTEMP_0)
+    AC_DEFINE(DECL_MKSTEMP_0)
+    AC_DEFINE(DECL_MRAND48_0)
     AC_DEFINE(DECL_RENAME_0)
     AC_DEFINE(DECL_SELECT_0)
     AC_DEFINE(DECL_SETITIMER_0)
     AC_DEFINE(DECL_SETPRIORITY_0)
     AC_DEFINE(DECL_SIGVEC_0)
+    AC_DEFINE(DECL_SRAND48_0)
     case "`basename $ac_cv_prog_CC`" in
      acc*) ;;
-     gcc*) ;;
      *) AC_DEFINE(DECL_STDIO_0)
        ;;
     esac
@@ -801,6 +804,7 @@ case "$target" in
     AC_DEFINE(DECL_TIME_0)
     AC_DEFINE(DECL_TIMEOFDAY_0)
     AC_DEFINE(DECL_TOLOWER_0)
+    AC_DEFINE(DECL_TOUPPER_0)
     ;;
  *-*-ultrix4*)
     AC_DEFINE(DECL_ADJTIME_0)

diff --git a/include/l_stdlib.h b/include/l_stdlib.h
index 0be5b8f26528adb3075daea7529ad60596e2273e..fdabe67163f7290cf7c9d06a0dd0d8e4917959e8 100644 (file)
--- a/include/l_stdlib.h
+++ b/include/l_stdlib.h
@@ -169,6 +169,10 @@ extern     int     vsprintf        P((char *, const char *, ...));
 extern int     stime           P((const time_t *));
 #endif
 
+#ifdef DECL_STRERROR_0
+extern char *  strerror                P((int errnum));
+#endif
+
 #ifdef DECL_STRTOL_0
 extern long    strtol          P((const char *, char **, int));
 #endif
@@ -207,6 +211,10 @@ extern     int     settimeofday    P((struct timeval *, void *));
 extern int     tolower         P((int));
 #endif
 
+#ifdef DECL_TOUPPER_0
+extern int     toupper         P((int));
+#endif
+
 /*
  * Necessary variable declarations.
  */