--- /dev/null
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_AMBA_PL08X=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_GEMINI=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_ARCH_MOXART is not set
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+# CONFIG_ARCH_MULTI_V5 is not set
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+CONFIG_ARM_HAS_GROUP_RELOCS=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+CONFIG_ATA_FORCE=y
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BOUNCE=y
+CONFIG_BUFFER_HEAD=y
+CONFIG_CACHESTAT_SYSCALL=y
+CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_PERCENTAGE=10
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+# CONFIG_CMA_SIZE_SEL_MBYTES is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
+# CONFIG_CMA_SYSFS is not set
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_GEMINI=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CONTIG_ALLOC=y
+CONFIG_COREDUMP=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_FA=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FA=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_FA526=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MITIGATIONS=y
+CONFIG_CPU_NO_EFFICIENT_FFS=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_TLB_FA=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_SL3516=y
+# CONFIG_CRYPTO_DEV_SL3516_DEBUG is not set
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_ENGINE=y
+CONFIG_CRYPTO_GENIV=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
+CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
+CONFIG_CRYPTO_JITTERENTROPY_OSR=1
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_GF128MUL=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_LIB_UTILS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA3=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_USER=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DMADEVICES=y
+CONFIG_DMATEST=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_ENGINE_RAID=y
+CONFIG_DMA_NEED_SYNC=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS_HELPERS=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DRM=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_FBDEV_OVERALLOC=100
+CONFIG_DRM_GEM_DMA_HELPER=y
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_BRIDGE=y
+CONFIG_DRM_PANEL_ILITEK_IL9322=y
+CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
+CONFIG_DRM_TVE200=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_ELF_CORE=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
+# CONFIG_EXPERT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXTCON=y
+CONFIG_FARADAY_FTINTC010=y
+CONFIG_FB=y
+CONFIG_FB_CORE=y
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_DMAMEM_HELPERS=y
+CONFIG_FB_DMAMEM_HELPERS_DEFERRED=y
+CONFIG_FB_SYSMEM_FOPS=y
+CONFIG_FB_SYSMEM_HELPERS=y
+CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FHANDLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FORCE_NR_CPUS=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FTTMR010_TIMER=y
+CONFIG_FTWDT010_WATCHDOG=y
+CONFIG_FUNCTION_ALIGNMENT=0
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_GEMINI_ETHERNET=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_DEVICES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_FTGPIO010=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HDMI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_IO_URING=y
+CONFIG_IPC_NS=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQSTACKS=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISDN is not set
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+CONFIG_KCMP=y
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+CONFIG_KEXEC=y
+CONFIG_KEXEC_CORE=y
+CONFIG_KEYBOARD_DLINK_DIR685=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
+# CONFIG_LDM_DEBUG is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LEDS_TRIGGER_DISK=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MMU_LAZY_TLB_REFCOUNT=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MQ_IOSCHED_DEADLINE=y
+CONFIG_MQ_IOSCHED_KYBER=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_GEMINI=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_OPENWRT_PROLOG=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_NAMESPACES=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DEVMEM=y
+CONFIG_NET_EGRESS=y
+CONFIG_NET_INGRESS=y
+CONFIG_NET_NS=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_XGRESS=y
+CONFIG_NLS=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_LAYOUTS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+CONFIG_PATA_FTIDE010=y
+CONFIG_PCI=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_FTPCI100=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLIB_LEDS=y
+CONFIG_PID_NS=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_GEMINI=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GEMINI_POWEROFF=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RATIONAL=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_GZIP=y
+CONFIG_RD_LZ4=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_RD_XZ=y
+CONFIG_REALTEK_PHY=y
+CONFIG_REALTEK_PHY_HWMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RELAY=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RSEQ=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_FTRTC010=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RTC_NVMEM=y
+CONFIG_SATA_GEMINI=y
+CONFIG_SATA_HOST=y
+CONFIG_SATA_PMP=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SENSORS_DRIVETEMP=y
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_EXAR=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PCILIB=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SG_POOL=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_STACKDEPOT=y
+CONFIG_STACKTRACE=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SWPHY=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSFS_SYSCALL=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB_COMMON=y
+# CONFIG_USB_FOTG210 is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USER_NS=y
+CONFIG_USE_OF=y
+CONFIG_UTS_NS=y
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VIDEO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARM64=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_RISCV=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_INFLATE=y
--- /dev/null
+From 771db4a77c5fb6da4908825e65f500ad67f86e5f Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Fri, 23 Jan 2026 16:24:49 +0100
+Subject: [PATCH] ARM: dts: gemini: Fix partition offsets
+
+These FIS partition offsets were never right: the comment clearly
+states the FIS index is at 0xfe0000 and 0x7f * 0x200000 is
+0xfe0000.
+
+Tested on the iTian SQ201.
+
+Fixes: d88b11ef91b1 ("ARM: dts: Fix up SQ201 flash access")
+Fixes: b5a923f8c739 ("ARM: dts: gemini: Switch to redboot partition parsing")
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-sl93512r.dts | 2 +-
+ arch/arm/boot/dts/gemini/gemini-sq201.dts | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
++++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
+@@ -146,7 +146,7 @@
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0xfe0000 */
+- fis-index-block = <0x1fc>;
++ fis-index-block = <0x7f>;
+ };
+ };
+
+--- a/arch/arm/boot/dts/gemini/gemini-sq201.dts
++++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
+@@ -134,7 +134,7 @@
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0xfe0000 */
+- fis-index-block = <0x1fc>;
++ fis-index-block = <0x7f>;
+ };
+ };
+
--- /dev/null
+From 46267aeb78cc7aba845da4c17acff1d46b694647 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Wed, 14 Jan 2026 09:29:48 +0100
+Subject: [PATCH 1/2] ARM: dts: Add a Verbatim Gigabit NAS DTS
+
+This adds a device tree for the Verbatim S08V1901-D1 NAS
+which also has the product names "Gigabit Network Hard Drive"
+"Gigabit NAS" and maybe other names.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/Makefile | 1 +
+ .../gemini/gemini-verbatim-s08v1901-d1.dts | 225 ++++++++++++++++++
+ 2 files changed, 226 insertions(+)
+ create mode 100644 arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
+
+--- a/arch/arm/boot/dts/gemini/Makefile
++++ b/arch/arm/boot/dts/gemini/Makefile
+@@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
+ gemini-sl93512r.dtb \
+ gemini-sq201.dtb \
+ gemini-ssi1328.dtb \
++ gemini-verbatim-s08v1901-d1.dtb \
+ gemini-wbd111.dtb \
+ gemini-wbd222.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
+@@ -0,0 +1,225 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Device Tree file for the Verbatim S08V1901-D1
++ * on product packaging called "Verbatim Gigabit Ethernet Hard Drive"
++ */
++
++/dts-v1/;
++
++#include "gemini.dtsi"
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "Verbatim Gigabit Ethernet Hard Drive S08V1901-D1";
++ compatible = "verbatim,s08v1901-d1", "cortina,gemini";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ memory@0 {
++ /* 64MB SDRAM in 2 x Hynix HY5DU561622ETP-D43 */
++ device_type = "memory";
++ reg = <0x00000000 0x4000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
++ stdout-path = &uart0;
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++
++ button-reset {
++ debounce-interval = <50>;
++ wakeup-source;
++ linux,code = <KEY_RESTART>;
++ label = "reset";
++ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ led-green-harddisk {
++ function = LED_FUNCTION_DISK_ACTIVITY;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
++ default-state = "off";
++ linux,default-trigger = "disk-activity";
++ };
++ };
++
++ /*
++ * Fan control candidates: gpio0 10, gpio1 28
++ */
++
++ mdio0: mdio {
++ compatible = "virtual,mdio-gpio";
++ /* Uses MDC and MDIO */
++ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
++ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ /* This is a Realtek RTL8211CL ethernet PHY */
++ phy0: ethernet-phy@1 {
++ reg = <1>;
++ };
++ };
++
++ /*
++ * I haven't found a way to control the fan, it appears to be
++ * always on.
++ */
++ thermal-zones {
++ chassis-thermal {
++ /* Poll every 20 seconds */
++ polling-delay = <20000>;
++ /* Poll every 2nd second when cooling */
++ polling-delay-passive = <2000>;
++ /* Use the thermal sensor in the hard drive */
++ thermal-sensors = <&drive0>;
++
++ /* Tripping points from the fan.script in the rootfs */
++ trips {
++ alert: chassis-alert {
++ /* At 43 degrees turn on the fan */
++ temperature = <43000>;
++ hysteresis = <3000>;
++ type = "active";
++ };
++ crit: chassis-crit {
++ /* Just shut down at 60 degrees */
++ temperature = <60000>;
++ hysteresis = <2000>;
++ type = "critical";
++ };
++ };
++ };
++ };
++
++ soc {
++ flash@30000000 {
++ /*
++ * This is a Spansion S29GL128P11TFI01 852FB245 A
++ * 128Mbit (16MB) Flash memory.
++ */
++ status = "okay";
++ reg = <0x30000000 0x01000000>;
++
++ partitions {
++ compatible = "redboot-fis";
++ /* Eraseblock at 0xfe0000 */
++ fis-index-block = <0x7f>;
++ };
++ };
++
++ syscon: syscon@40000000 {
++ pinctrl {
++ /*
++ * gpio0agrp cover line 0-4 as line 1 is used for the LED
++ * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
++ */
++ gpio0_default_pins: pinctrl-gpio0 {
++ mux {
++ function = "gpio0";
++ groups = "gpio0agrp", "gpio0hgrp";
++ };
++ };
++ gpio1_default_pins: pinctrl-gpio1 {
++ /*
++ * Free up the TVC pins at GPIO1 offset 28,29,30,31
++ * line 31 is used for reset key
++ */
++ mux {
++ function = "gpio1";
++ groups = "gpio1dgrp";
++ };
++ };
++ pinctrl-gmii {
++ mux {
++ function = "gmii";
++ groups = "gmii_gmac0_grp";
++ };
++ /* TODO: investigate vendor registers on boot */
++ conf0 {
++ pins = "V8 GMAC0 RXDV";
++ skew-delay = <0>;
++ };
++ conf1 {
++ pins = "Y7 GMAC0 RXC";
++ skew-delay = <15>;
++ };
++ conf2 {
++ pins = "T8 GMAC0 TXEN";
++ skew-delay = <7>;
++ };
++ conf3 {
++ pins = "U8 GMAC0 TXC";
++ skew-delay = <10>;
++ };
++ conf4 {
++ /* The data lines all have default skew */
++ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
++ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
++ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
++ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3";
++ skew-delay = <7>;
++ };
++ };
++ };
++ };
++
++ /* Both interfaces brought out on SATA connectors */
++ sata: sata@46000000 {
++ cortina,gemini-ata-muxmode = <0>;
++ cortina,gemini-enable-sata-bridge;
++ status = "okay";
++ };
++
++ gpio0: gpio@4d000000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gpio0_default_pins>;
++ };
++
++ gpio1: gpio@4e000000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gpio1_default_pins>;
++ };
++
++ ethernet@60000000 {
++ status = "okay";
++
++ ethernet-port@0 {
++ phy-mode = "rgmii";
++ phy-handle = <&phy0>;
++ };
++ };
++
++ ide@63000000 {
++ status = "okay";
++ /*
++ * This drive may have a temperature sensor with a
++ * thermal zone we can use for thermal control of the
++ * chassis temperature using the fan.
++ */
++ drive0: ide-port@0 {
++ reg = <0>;
++ #thermal-sensor-cells = <0>;
++ };
++ };
++
++ ide@63400000 {
++ status = "okay";
++ };
++
++ usb@68000000 {
++ status = "okay";
++ };
++
++ usb@69000000 {
++ status = "okay";
++ };
++ };
++};
--- /dev/null
+From e6619c1d068dea0d4d29cf770a85bb8bfcfd104b Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Thu, 12 Feb 2026 00:17:53 +0100
+Subject: [PATCH 1/2] ARM: dts: Add a Raidsonic IB-4210-B DTS
+
+This adds a device tree for the Raidsonic IB-4210-B NAS, a slightly
+under-powered version of IB-4220-B with half the memory and
+the cheaper version of the SoC.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/Makefile | 1 +
+ arch/arm/boot/dts/gemini/gemini-nas4210b.dts | 205 +++++++++++++++++++
+ 2 files changed, 206 insertions(+)
+ create mode 100644 arch/arm/boot/dts/gemini/gemini-nas4210b.dts
+
+--- a/arch/arm/boot/dts/gemini/Makefile
++++ b/arch/arm/boot/dts/gemini/Makefile
+@@ -2,6 +2,7 @@
+ dtb-$(CONFIG_ARCH_GEMINI) += \
+ gemini-dlink-dir-685.dtb \
+ gemini-dlink-dns-313.dtb \
++ gemini-nas4210b.dtb \
+ gemini-nas4220b.dtb \
+ gemini-ns2502.dtb \
+ gemini-rut1xx.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
+@@ -0,0 +1,205 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Device Tree file for the Gemini-based Raidsonic NAS IB-4210-B
++ * Based on the NAS Forum experiments by user "CptSpock".
++ */
++
++/dts-v1/;
++
++#include "gemini.dtsi"
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "Raidsonic NAS IB-4210-B";
++ compatible = "raidsonic,ib-4210-b", "cortina,gemini";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ memory@0 { /* 64 MB */
++ device_type = "memory";
++ reg = <0x00000000 0x4000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
++ stdout-path = &uart0;
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++
++ button-setup {
++ debounce-interval = <100>;
++ wakeup-source;
++ linux,code = <KEY_SETUP>;
++ label = "Backup button";
++ /* Conflict with TVC */
++ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
++ };
++ button-restart {
++ debounce-interval = <100>;
++ wakeup-source;
++ linux,code = <KEY_RESTART>;
++ label = "Softreset button";
++ /* Conflict with TVC */
++ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ led-orange-hdd {
++ label = "nas4220b:orange:hdd";
++ /* Conflict with TVC */
++ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ linux,default-trigger = "disk-activity";
++ };
++ led-green-os {
++ label = "nas4220b:green:os";
++ /* Conflict with TVC */
++ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++ };
++
++ mdio0: mdio {
++ compatible = "virtual,mdio-gpio";
++ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
++ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ /* Realtek RTL8211B */
++ phy0: ethernet-phy@1 {
++ reg = <1>;
++ device_type = "ethernet-phy";
++ };
++ };
++
++ soc {
++ flash@30000000 {
++ status = "okay";
++ /* 16MB of flash */
++ reg = <0x30000000 0x01000000>;
++
++ partitions {
++ compatible = "redboot-fis";
++ /* Eraseblock at 0xfe0000 */
++ fis-index-block = <0x7f>;
++ };
++ };
++
++ syscon: syscon@40000000 {
++ pinctrl {
++ gpio0_default_pins: pinctrl-gpio0 {
++ mux {
++ function = "gpio0";
++ groups =
++ "gpio0egrp",
++ /* Used by MDIO */
++ "gpio0igrp";
++ };
++ };
++ gpio1_default_pins: pinctrl-gpio1 {
++ mux {
++ function = "gpio1";
++ /* Lines 28-31 used by LEDs and buttons */
++ groups = "gpio1dgrp";
++ };
++ };
++ pinctrl-gmii {
++ mux {
++ function = "gmii";
++ groups = "gmii_gmac0_grp";
++ };
++ conf0 {
++ pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
++ skew-delay = <0>;
++ };
++ conf1 {
++ pins = "T8 GMAC0 RXC";
++ skew-delay = <10>;
++ };
++ conf2 {
++ pins = "T11 GMAC1 RXC";
++ skew-delay = <15>;
++ };
++ conf3 {
++ pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
++ skew-delay = <7>;
++ };
++ conf4 {
++ pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
++ skew-delay = <10>;
++ };
++ conf5 {
++ /* The data lines all have default skew */
++ pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
++ "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
++ "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
++ "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
++ "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
++ "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
++ skew-delay = <7>;
++ };
++ conf6 {
++ pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
++ "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
++ skew-delay = <5>;
++ };
++ /* Set up drive strength on GMAC0 to 16 mA */
++ conf7 {
++ groups = "gmii_gmac0_grp";
++ drive-strength = <16>;
++ };
++ };
++ };
++ };
++
++ sata: sata@46000000 {
++ cortina,gemini-ata-muxmode = <0>;
++ cortina,gemini-enable-sata-bridge;
++ status = "okay";
++ };
++
++ gpio0: gpio@4d000000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gpio0_default_pins>;
++ };
++
++ gpio1: gpio@4e000000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gpio1_default_pins>;
++ };
++
++ ethernet@60000000 {
++ status = "okay";
++
++ ethernet-port@0 {
++ phy-mode = "rgmii";
++ phy-handle = <&phy0>;
++ };
++ ethernet-port@1 {
++ /* Not used in this platform */
++ };
++ };
++
++ ide@63000000 {
++ status = "okay";
++ };
++
++ ide@63400000 {
++ status = "okay";
++ };
++
++ usb@68000000 {
++ status = "okay";
++ };
++
++ usb@69000000 {
++ status = "okay";
++ };
++ };
++};
--- /dev/null
+From 1cf93e2435f0d7a7e8c9fd0d4355e6a521f72fc1 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Sat, 14 Feb 2026 00:12:51 +0100
+Subject: [PATCH 1/2] ARM: dts: gemini: Correct the RUT1xx
+
+Fix two problems with the RUT1xx device tree:
+- The memory is 32MB not 128MB
+- The console is 19200 BPS
+- Activate the PCI
+- Disable the unused USB ports
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-rut1xx.dts | 18 +++++++-----------
+ 1 file changed, 7 insertions(+), 11 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
++++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
+@@ -14,13 +14,13 @@
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+- memory@0 { /* 128 MB */
++ memory@0 { /* 32 MB */
+ device_type = "memory";
+- reg = <0x00000000 0x8000000>;
++ reg = <0x00000000 0x2000000>;
+ };
+
+ chosen {
+- bootargs = "console=ttyS0,115200n8";
++ bootargs = "console=ttyS0,19200n8";
+ stdout-path = &uart0;
+ };
+
+@@ -113,6 +113,10 @@
+ pinctrl-0 = <&gpio1_default_pins>;
+ };
+
++ pci@50000000 {
++ status = "okay";
++ };
++
+ ethernet@60000000 {
+ status = "okay";
+
+@@ -124,13 +128,5 @@
+ /* Not used in this platform */
+ };
+ };
+-
+- usb@68000000 {
+- status = "okay";
+- };
+-
+- usb@69000000 {
+- status = "okay";
+- };
+ };
+ };
--- /dev/null
+From 0890faebd0155f57ef34fb1e766fd3ed8a127595 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Mon, 11 Mar 2019 15:44:29 +0100
+Subject: [PATCH 2/2] ARM: dts: Augment DIR-685 partition table for OpenWrt
+
+Rename the firmware partition so that the firmware MTD
+splitter will do its job, drop the rootfs arguments as
+the MTD splitter will set this up automatically.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
++++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
+@@ -20,7 +20,7 @@
+ };
+
+ chosen {
+- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
++ bootargs = "console=ttyS0,19200n8 consoleblank=300";
+ stdout-path = "uart0:19200n8";
+ };
+
+@@ -317,9 +317,9 @@
+ * this is called "upgrade" on the vendor system.
+ */
+ partition@40000 {
+- label = "upgrade";
++ compatible = "wrg";
++ label = "firmware";
+ reg = <0x00040000 0x01f40000>;
+- read-only;
+ };
+ /* RGDB, Residental Gateway Database? */
+ partition@1f80000 {
--- /dev/null
+From a4ea0ccf0f630b5fb0ccd2ddbb237c37ef0fc5a9 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Mon, 26 Jan 2026 08:14:22 +0100
+Subject: [PATCH] ARM: dts: gemini: Tag disk led for disk-activity
+
+Linux now has a trigger specifically for all disk activity
+and this is what the LED is used for so tag it like such.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-nas4220b.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
++++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
+@@ -52,6 +52,7 @@
+ /* Conflict with TVC */
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
++ linux,default-trigger = "disk-activity";
+ };
+ led-green-os {
+ label = "nas4220b:green:os";
--- /dev/null
+From 1b5c6be7b6dc6c096e1fd55ce10809d350e3afab Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Mon, 26 Jan 2026 08:09:04 +0100
+Subject: [PATCH] gemini: augment DTS with botched partitions
+
+We override the RedBoot FIS partition table with a custom one
+using fixed-partitions.
+
+Mostly this is a 1-to-1 copy, but the three partitions called
+"Kern", "Ramdisk" and "Application" are combined into one
+called "firmware" which is optimal for OpenWrt.
+
+The RedBoot bootloader still sees the three partitions and will
+load the first two into memory to boot the system, which
+is fine: the kernel will still be there.
+
+To avoid confusing the MTD partition splitter we also need to
+remove any command line root partition arguments.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-nas4220b.dts | 39 ++++++++++++++++++--
+ 1 file changed, 35 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
++++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
+@@ -20,7 +20,7 @@
+ };
+
+ chosen {
+- bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
++ bootargs = "console=ttyS0,19200n8";
+ stdout-path = &uart0;
+ };
+
+@@ -82,10 +82,41 @@
+ /* 16MB of flash */
+ reg = <0x30000000 0x01000000>;
+
++ /*
++ * Override the RedBoot partition table with fixed partitions
++ * in order to create a coherent "firmware" partition so that
++ * we can have optimal flash usage with OpenWrt in a big
++ * MTD-splitted "firmware" partition.
++ */
+ partitions {
+- compatible = "redboot-fis";
+- /* Eraseblock at 0xfe0000 */
+- fis-index-block = <0x7f>;
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ partition@0 {
++ label = "BOOT";
++ reg = <0x00000000 0x00020000>;
++ read-only;
++ };
++ partition@1 {
++ compatible = "openwrt,executable-prolog";
++ label = "firmware";
++ reg = <0x00020000 0x00f00000>;
++ };
++ partition@2 {
++ label = "VCTL";
++ reg = <0x00f20000 0x00020000>;
++ read-only;
++ };
++ partition@3 {
++ label = "CurConf";
++ reg = <0x00f40000 0x000a0000>;
++ read-only;
++ };
++ partition@4 {
++ label = "FIS directory";
++ reg = <0x00fe0000 0x00020000>;
++ read-only;
++ };
+ };
+ };
+
--- /dev/null
+From e0881008b49ecbec1c88f1f96c62a6a37c808df4 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Sun, 1 Feb 2026 00:21:08 +0100
+Subject: [PATCH] gemini: augment SQ201 DTS with botched partitions
+
+Same botched partitions as the Raidsonic IB-4220-B.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-sq201.dts | 39 ++++++++++++++++++++---
+ 1 file changed, 35 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-sq201.dts
++++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
+@@ -20,7 +20,7 @@
+ };
+
+ chosen {
+- bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
++ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+@@ -131,10 +131,41 @@
+ /* 16MB of flash */
+ reg = <0x30000000 0x01000000>;
+
++ /*
++ * Override the RedBoot partition table with fixed partitions
++ * in order to create a coherent "firmware" partition so that
++ * we can have optimal flash usage with OpenWrt in a big
++ * MTD-splitted "firmware" partition.
++ */
+ partitions {
+- compatible = "redboot-fis";
+- /* Eraseblock at 0xfe0000 */
+- fis-index-block = <0x7f>;
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ partition@0 {
++ label = "BOOT";
++ reg = <0x00000000 0x00016000>;
++ read-only;
++ };
++ partition@1 {
++ compatible = "openwrt,executable-prolog";
++ label = "firmware";
++ reg = <0x00120000 0x00e00000>;
++ };
++ partition@2 {
++ label = "VCTL";
++ reg = <0x00f20000 0x00020000>;
++ read-only;
++ };
++ partition@3 {
++ label = "CurConf";
++ reg = <0x00f40000 0x000a0000>;
++ read-only;
++ };
++ partition@4 {
++ label = "FIS directory";
++ reg = <0x00fe0000 0x00020000>;
++ read-only;
++ };
+ };
+ };
+
--- /dev/null
+From b5732601a7ff5457cb1e3a9389761aa23a81f54d Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Sun, 1 Feb 2026 10:20:56 +0100
+Subject: [PATCH] gemini: augment SL93512R DTS with botched partitions
+
+Same botched partitions as the Raidsonic IB-4220-B.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-sl93512r.dts | 39 ++++++++++++++++++--
+ 1 file changed, 35 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
++++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
+@@ -24,7 +24,7 @@
+ };
+
+ chosen {
+- bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
++ bootargs = "console=ttyS0,19200n8";
+ stdout-path = &uart0;
+ };
+
+@@ -143,10 +143,41 @@
+ /* 16MB of flash */
+ reg = <0x30000000 0x01000000>;
+
++ /*
++ * Override the RedBoot partition table with fixed partitions
++ * in order to create a coherent "firmware" partition so that
++ * we can have optimal flash usage with OpenWrt in a big
++ * MTD-splitted "firmware" partition.
++ */
+ partitions {
+- compatible = "redboot-fis";
+- /* Eraseblock at 0xfe0000 */
+- fis-index-block = <0x7f>;
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ partition@0 {
++ label = "BOOT";
++ reg = <0x00000000 0x00020000>;
++ read-only;
++ };
++ partition@1 {
++ compatible = "openwrt,executable-prolog";
++ label = "firmware";
++ reg = <0x00020000 0x00f00000>;
++ };
++ partition@2 {
++ label = "VCTL";
++ reg = <0x00f20000 0x00020000>;
++ read-only;
++ };
++ partition@3 {
++ label = "CurConf";
++ reg = <0x00f40000 0x000a0000>;
++ read-only;
++ };
++ partition@4 {
++ label = "FIS directory";
++ reg = <0x00fe0000 0x00020000>;
++ read-only;
++ };
+ };
+ };
+
--- /dev/null
+From 590d33c31529aae924fc38e356e93beca684e3be Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Sun, 1 Feb 2026 23:10:25 +0100
+Subject: [PATCH 2/2] gemini: augment Verbatim DTS with botched partitions
+
+Same botched partitions as the Raidsonic IB-4220-B.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ .../gemini/gemini-verbatim-s08v1901-d1.dts | 39 +++++++++++++++++--
+ 1 file changed, 35 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
++++ b/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
+@@ -23,7 +23,7 @@
+ };
+
+ chosen {
+- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
++ bootargs = "console=ttyS0,19200n8";
+ stdout-path = &uart0;
+ };
+
+@@ -108,10 +108,41 @@
+ status = "okay";
+ reg = <0x30000000 0x01000000>;
+
++ /*
++ * Override the RedBoot partition table with fixed partitions
++ * in order to create a coherent "firmware" partition so that
++ * we can have optimal flash usage with OpenWrt in a big
++ * MTD-splitted "firmware" partition.
++ */
+ partitions {
+- compatible = "redboot-fis";
+- /* Eraseblock at 0xfe0000 */
+- fis-index-block = <0x7f>;
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ partition@0 {
++ label = "BOOT";
++ reg = <0x00000000 0x00020000>;
++ read-only;
++ };
++ partition@1 {
++ compatible = "openwrt,executable-prolog";
++ label = "firmware";
++ reg = <0x00020000 0x00f00000>;
++ };
++ partition@2 {
++ label = "VCTL";
++ reg = <0x00f20000 0x00020000>;
++ read-only;
++ };
++ partition@3 {
++ label = "CurConf";
++ reg = <0x00f40000 0x000a0000>;
++ read-only;
++ };
++ partition@4 {
++ label = "FIS directory";
++ reg = <0x00fe0000 0x00020000>;
++ read-only;
++ };
+ };
+ };
+
--- /dev/null
+From fdfaeca6b5eed05e446f298c5e597df39b96629a Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Thu, 12 Feb 2026 00:22:30 +0100
+Subject: [PATCH 2/2] gemini: augment NAS4210 DTS with botched partitions
+
+Same botched partitions as the Raidsonic IB-4220-B.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-nas4210b.dts | 37 ++++++++++++++++++--
+ 1 file changed, 34 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
++++ b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
+@@ -84,10 +84,41 @@
+ /* 16MB of flash */
+ reg = <0x30000000 0x01000000>;
+
++ /*
++ * Override the RedBoot partition table with fixed partitions
++ * in order to create a coherent "firmware" partition so that
++ * we can have optimal flash usage with OpenWrt in a big
++ * MTD-splitted "firmware" partition.
++ */
+ partitions {
+- compatible = "redboot-fis";
+- /* Eraseblock at 0xfe0000 */
+- fis-index-block = <0x7f>;
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ partition@0 {
++ label = "BOOT";
++ reg = <0x00000000 0x00020000>;
++ read-only;
++ };
++ partition@1 {
++ compatible = "openwrt,executable-prolog";
++ label = "firmware";
++ reg = <0x00020000 0x00f00000>;
++ };
++ partition@2 {
++ label = "VCTL";
++ reg = <0x00f20000 0x00020000>;
++ read-only;
++ };
++ partition@3 {
++ label = "CurConf";
++ reg = <0x00f40000 0x000a0000>;
++ read-only;
++ };
++ partition@4 {
++ label = "FIS directory";
++ reg = <0x00fe0000 0x00020000>;
++ read-only;
++ };
+ };
+ };
+
--- /dev/null
+From 0b6bed71689664080e1e9ec95aecf45279dde6ee Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linusw@kernel.org>
+Date: Sat, 14 Feb 2026 00:21:13 +0100
+Subject: [PATCH 2/2] gemini: augment RUT1xx DTS with botched partitions
+
+Same botched partitions as the Raidsonic IB-4220-B.
+
+Signed-off-by: Linus Walleij <linusw@kernel.org>
+---
+ arch/arm/boot/dts/gemini/gemini-rut1xx.dts | 37 +++++++++++++++++++++-
+ 1 file changed, 36 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
++++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
+@@ -74,7 +74,42 @@
+ status = "okay";
+ /* 8MB of flash */
+ reg = <0x30000000 0x00800000>;
+- /* TODO: add flash partitions here */
++ /*
++ * Override the RedBoot partition table with fixed partitions
++ * in order to create a coherent "firmware" partition so that
++ * we can have optimal flash usage with OpenWrt in a big
++ * MTD-splitted "firmware" partition.
++ */
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ partition@0 {
++ label = "BOOT";
++ reg = <0x00000000 0x00020000>;
++ read-only;
++ };
++ partition@1 {
++ compatible = "openwrt,executable-prolog";
++ label = "firmware";
++ reg = <0x00020000 0x007a0000>;
++ };
++ partition@2 {
++ label = "VCTL";
++ reg = <0x007c0000 0x00010000>;
++ read-only;
++ };
++ partition@3 {
++ label = "cfg";
++ reg = <0x007d0000 0x00020000>;
++ read-only;
++ };
++ partition@4 {
++ label = "FIS directory";
++ reg = <0x007f0000 0x00010000>;
++ read-only;
++ };
++ };
+ };
+
+ syscon: syscon@40000000 {
projects / thirdparty / openwrt.git / commitdiff
