--- /dev/null
+From 7a99afef17af66c276c1d6e6f4dbcac223eaf6ac Mon Sep 17 00:00:00 2001
+From: Ronald Wahl <ronald.wahl@raritan.com>
+Date: Tue, 9 Jul 2024 21:58:45 +0200
+Subject: net: ks8851: Fix potential TX stall after interface reopen
+
+From: Ronald Wahl <ronald.wahl@raritan.com>
+
+commit 7a99afef17af66c276c1d6e6f4dbcac223eaf6ac upstream.
+
+The amount of TX space in the hardware buffer is tracked in the tx_space
+variable. The initial value is currently only set during driver probing.
+
+After closing the interface and reopening it the tx_space variable has
+the last value it had before close. If it is smaller than the size of
+the first send packet after reopeing the interface the queue will be
+stopped. The queue is woken up after receiving a TX interrupt but this
+will never happen since we did not send anything.
+
+This commit moves the initialization of the tx_space variable to the
+ks8851_net_open function right before starting the TX queue. Also query
+the value from the hardware instead of using a hard coded value.
+
+Only the SPI chip variant is affected by this issue because only this
+driver variant actually depends on the tx_space variable in the xmit
+function.
+
+Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
+Cc: "David S. Miller" <davem@davemloft.net>
+Cc: Eric Dumazet <edumazet@google.com>
+Cc: Jakub Kicinski <kuba@kernel.org>
+Cc: Paolo Abeni <pabeni@redhat.com>
+Cc: Simon Horman <horms@kernel.org>
+Cc: netdev@vger.kernel.org
+Cc: stable@vger.kernel.org # 5.10+
+Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
+Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
+Link: https://patch.msgid.link/20240709195845.9089-1-rwahl@gmx.de
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/micrel/ks8851_common.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/micrel/ks8851_common.c
++++ b/drivers/net/ethernet/micrel/ks8851_common.c
+@@ -501,6 +501,7 @@ static int ks8851_net_open(struct net_de
+ ks8851_wrreg16(ks, KS_IER, ks->rc_ier);
+
+ ks->queued_len = 0;
++ ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR);
+ netif_start_queue(ks->netdev);
+
+ netif_dbg(ks, ifup, ks->netdev, "network device up\n");
+@@ -1057,7 +1058,6 @@ int ks8851_probe_common(struct net_devic
+ int ret;
+
+ ks->netdev = netdev;
+- ks->tx_space = 6144;
+
+ gpio = of_get_named_gpio_flags(dev->of_node, "reset-gpios", 0, NULL);
+ if (gpio == -EPROBE_DEFER)
arm-davinci-convert-comma-to-semicolon.patch
octeontx2-af-fix-detection-of-ip-layer.patch
tcp-use-signed-arithmetic-in-tcp_rtx_probe0_timed_out.patch
+tcp-avoid-too-many-retransmit-packets.patch
+net-ks8851-fix-potential-tx-stall-after-interface-reopen.patch
+usb-serial-option-add-telit-generic-core-dump-composition.patch
+usb-serial-option-add-telit-fn912-rmnet-compositions.patch
+usb-serial-option-add-fibocom-fm350-gl.patch
+usb-serial-option-add-support-for-foxconn-t99w651.patch
+usb-serial-option-add-netprisma-lcuk54-series-modules.patch
+usb-serial-option-add-rolling-rw350-gl-variants.patch
+usb-serial-mos7840-fix-crash-on-resume.patch
+usb-add-usb_quirk_no_set_intf-quirk-for-start-bp-850k.patch
+usb-gadget-configfs-prevent-oob-read-write-in-usb_string_copy.patch
+usb-core-fix-duplicate-endpoint-bug-by-clearing-reserved-bits-in-the-descriptor.patch
--- /dev/null
+From 97a9063518f198ec0adb2ecb89789de342bb8283 Mon Sep 17 00:00:00 2001
+From: Eric Dumazet <edumazet@google.com>
+Date: Wed, 10 Jul 2024 00:14:01 +0000
+Subject: tcp: avoid too many retransmit packets
+
+From: Eric Dumazet <edumazet@google.com>
+
+commit 97a9063518f198ec0adb2ecb89789de342bb8283 upstream.
+
+If a TCP socket is using TCP_USER_TIMEOUT, and the other peer
+retracted its window to zero, tcp_retransmit_timer() can
+retransmit a packet every two jiffies (2 ms for HZ=1000),
+for about 4 minutes after TCP_USER_TIMEOUT has 'expired'.
+
+The fix is to make sure tcp_rtx_probe0_timed_out() takes
+icsk->icsk_user_timeout into account.
+
+Before blamed commit, the socket would not timeout after
+icsk->icsk_user_timeout, but would use standard exponential
+backoff for the retransmits.
+
+Also worth noting that before commit e89688e3e978 ("net: tcp:
+fix unexcepted socket die when snd_wnd is 0"), the issue
+would last 2 minutes instead of 4.
+
+Fixes: b701a99e431d ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy")
+Signed-off-by: Eric Dumazet <edumazet@google.com>
+Cc: Neal Cardwell <ncardwell@google.com>
+Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
+Reviewed-by: Jon Maxwell <jmaxwell37@gmail.com>
+Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
+Link: https://patch.msgid.link/20240710001402.2758273-1-edumazet@google.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/tcp_timer.c | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+--- a/net/ipv4/tcp_timer.c
++++ b/net/ipv4/tcp_timer.c
+@@ -440,16 +440,28 @@ static void tcp_fastopen_synack_timer(st
+ static bool tcp_rtx_probe0_timed_out(const struct sock *sk,
+ const struct sk_buff *skb)
+ {
++ const struct inet_connection_sock *icsk = inet_csk(sk);
++ u32 user_timeout = READ_ONCE(icsk->icsk_user_timeout);
+ const struct tcp_sock *tp = tcp_sk(sk);
+- const int timeout = TCP_RTO_MAX * 2;
++ int timeout = TCP_RTO_MAX * 2;
+ u32 rtx_delta;
+ s32 rcv_delta;
+
++ if (user_timeout) {
++ /* If user application specified a TCP_USER_TIMEOUT,
++ * it does not want win 0 packets to 'reset the timer'
++ * while retransmits are not making progress.
++ */
++ if (rtx_delta > user_timeout)
++ return true;
++ timeout = min_t(u32, timeout, msecs_to_jiffies(user_timeout));
++ }
++
+ /* Note: timer interrupt might have been delayed by at least one jiffy,
+ * and tp->rcv_tstamp might very well have been written recently.
+ * rcv_delta can thus be negative.
+ */
+- rcv_delta = inet_csk(sk)->icsk_timeout - tp->rcv_tstamp;
++ rcv_delta = icsk->icsk_timeout - tp->rcv_tstamp;
+ if (rcv_delta <= timeout)
+ return false;
+
--- /dev/null
+From 3859e85de30815a20bce7db712ce3d94d40a682d Mon Sep 17 00:00:00 2001
+From: WangYuli <wangyuli@uniontech.com>
+Date: Tue, 2 Jul 2024 23:44:08 +0800
+Subject: USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
+
+From: WangYuli <wangyuli@uniontech.com>
+
+commit 3859e85de30815a20bce7db712ce3d94d40a682d upstream.
+
+START BP-850K is a dot matrix printer that crashes when
+it receives a Set-Interface request and needs USB_QUIRK_NO_SET_INTF
+to work properly.
+
+Cc: stable <stable@kernel.org>
+Signed-off-by: jinxiaobo <jinxiaobo@uniontech.com>
+Signed-off-by: WangYuli <wangyuli@uniontech.com>
+Link: https://lore.kernel.org/r/202E4B2BD0F0FEA4+20240702154408.631201-1-wangyuli@uniontech.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/quirks.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/core/quirks.c
++++ b/drivers/usb/core/quirks.c
+@@ -504,6 +504,9 @@ static const struct usb_device_id usb_qu
+ { USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
+ USB_QUIRK_DELAY_CTRL_MSG },
+
++ /* START BP-850k Printer */
++ { USB_DEVICE(0x1bc3, 0x0003), .driver_info = USB_QUIRK_NO_SET_INTF },
++
+ /* MIDI keyboard WORLDE MINI */
+ { USB_DEVICE(0x1c75, 0x0204), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
--- /dev/null
+From a368ecde8a5055b627749b09c6218ef793043e47 Mon Sep 17 00:00:00 2001
+From: Alan Stern <stern@rowland.harvard.edu>
+Date: Thu, 27 Jun 2024 15:56:18 -0400
+Subject: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
+
+From: Alan Stern <stern@rowland.harvard.edu>
+
+commit a368ecde8a5055b627749b09c6218ef793043e47 upstream.
+
+Syzbot has identified a bug in usbcore (see the Closes: tag below)
+caused by our assumption that the reserved bits in an endpoint
+descriptor's bEndpointAddress field will always be 0. As a result of
+the bug, the endpoint_is_duplicate() routine in config.c (and possibly
+other routines as well) may believe that two descriptors are for
+distinct endpoints, even though they have the same direction and
+endpoint number. This can lead to confusion, including the bug
+identified by syzbot (two descriptors with matching endpoint numbers
+and directions, where one was interrupt and the other was bulk).
+
+To fix the bug, we will clear the reserved bits in bEndpointAddress
+when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1
+specs say these bits are "Reserved, reset to zero".) This requires us
+to make a copy of the descriptor earlier in usb_parse_endpoint() and
+use the copy instead of the original when checking for duplicates.
+
+Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
+Reported-and-tested-by: syzbot+8693a0bb9c10b554272a@syzkaller.appspotmail.com
+Closes: https://lore.kernel.org/linux-usb/0000000000003d868e061bc0f554@google.com/
+Fixes: 0a8fd1346254 ("USB: fix problems with duplicate endpoint addresses")
+CC: Oliver Neukum <oneukum@suse.com>
+CC: stable@vger.kernel.org
+Link: https://lore.kernel.org/r/205a5edc-7fef-4159-b64a-80374b6b101a@rowland.harvard.edu
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/config.c | 18 +++++++++++++++---
+ 1 file changed, 15 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/core/config.c
++++ b/drivers/usb/core/config.c
+@@ -291,6 +291,20 @@ static int usb_parse_endpoint(struct dev
+ if (ifp->desc.bNumEndpoints >= num_ep)
+ goto skip_to_next_endpoint_or_interface_descriptor;
+
++ /* Save a copy of the descriptor and use it instead of the original */
++ endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
++ memcpy(&endpoint->desc, d, n);
++ d = &endpoint->desc;
++
++ /* Clear the reserved bits in bEndpointAddress */
++ i = d->bEndpointAddress &
++ (USB_ENDPOINT_DIR_MASK | USB_ENDPOINT_NUMBER_MASK);
++ if (i != d->bEndpointAddress) {
++ dev_notice(ddev, "config %d interface %d altsetting %d has an endpoint descriptor with address 0x%X, changing to 0x%X\n",
++ cfgno, inum, asnum, d->bEndpointAddress, i);
++ endpoint->desc.bEndpointAddress = i;
++ }
++
+ /* Check for duplicate endpoint addresses */
+ if (config_endpoint_is_duplicate(config, inum, asnum, d)) {
+ dev_notice(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+@@ -308,10 +322,8 @@ static int usb_parse_endpoint(struct dev
+ }
+ }
+
+- endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
++ /* Accept this endpoint */
+ ++ifp->desc.bNumEndpoints;
+-
+- memcpy(&endpoint->desc, d, n);
+ INIT_LIST_HEAD(&endpoint->urb_list);
+
+ /*
--- /dev/null
+From 6d3c721e686ea6c59e18289b400cc95c76e927e0 Mon Sep 17 00:00:00 2001
+From: Lee Jones <lee@kernel.org>
+Date: Fri, 5 Jul 2024 08:43:39 +0100
+Subject: usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
+
+From: Lee Jones <lee@kernel.org>
+
+commit 6d3c721e686ea6c59e18289b400cc95c76e927e0 upstream.
+
+Userspace provided string 's' could trivially have the length zero. Left
+unchecked this will firstly result in an OOB read in the form
+`if (str[0 - 1] == '\n') followed closely by an OOB write in the form
+`str[0 - 1] = '\0'`.
+
+There is already a validating check to catch strings that are too long.
+Let's supply an additional check for invalid strings that are too short.
+
+Signed-off-by: Lee Jones <lee@kernel.org>
+Cc: stable <stable@kernel.org>
+Link: https://lore.kernel.org/r/20240705074339.633717-1-lee@kernel.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/configfs.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/gadget/configfs.c
++++ b/drivers/usb/gadget/configfs.c
+@@ -104,9 +104,12 @@ static int usb_string_copy(const char *s
+ int ret;
+ char *str;
+ char *copy = *s_copy;
++
+ ret = strlen(s);
+ if (ret > USB_MAX_STRING_LEN)
+ return -EOVERFLOW;
++ if (ret < 1)
++ return -EINVAL;
+
+ if (copy) {
+ str = copy;
--- /dev/null
+From c15a688e49987385baa8804bf65d570e362f8576 Mon Sep 17 00:00:00 2001
+From: Dmitry Smirnov <d.smirnov@inbox.lv>
+Date: Sat, 15 Jun 2024 01:45:56 +0300
+Subject: USB: serial: mos7840: fix crash on resume
+
+From: Dmitry Smirnov <d.smirnov@inbox.lv>
+
+commit c15a688e49987385baa8804bf65d570e362f8576 upstream.
+
+Since commit c49cfa917025 ("USB: serial: use generic method if no
+alternative is provided in usb serial layer"), USB serial core calls the
+generic resume implementation when the driver has not provided one.
+
+This can trigger a crash on resume with mos7840 since support for
+multiple read URBs was added back in 2011. Specifically, both port read
+URBs are now submitted on resume for open ports, but the context pointer
+of the second URB is left set to the core rather than mos7840 port
+structure.
+
+Fix this by implementing dedicated suspend and resume functions for
+mos7840.
+
+Tested with Delock 87414 USB 2.0 to 4x serial adapter.
+
+Signed-off-by: Dmitry Smirnov <d.smirnov@inbox.lv>
+[ johan: analyse crash and rewrite commit message; set busy flag on
+ resume; drop bulk-in check; drop unnecessary usb_kill_urb() ]
+Fixes: d83b405383c9 ("USB: serial: add support for multiple read urbs")
+Cc: stable@vger.kernel.org # 3.3
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/mos7840.c | 45 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 45 insertions(+)
+
+--- a/drivers/usb/serial/mos7840.c
++++ b/drivers/usb/serial/mos7840.c
+@@ -1764,6 +1764,49 @@ static int mos7840_port_remove(struct us
+ return 0;
+ }
+
++static int mos7840_suspend(struct usb_serial *serial, pm_message_t message)
++{
++ struct moschip_port *mos7840_port;
++ struct usb_serial_port *port;
++ int i;
++
++ for (i = 0; i < serial->num_ports; ++i) {
++ port = serial->port[i];
++ if (!tty_port_initialized(&port->port))
++ continue;
++
++ mos7840_port = usb_get_serial_port_data(port);
++
++ usb_kill_urb(mos7840_port->read_urb);
++ mos7840_port->read_urb_busy = false;
++ }
++
++ return 0;
++}
++
++static int mos7840_resume(struct usb_serial *serial)
++{
++ struct moschip_port *mos7840_port;
++ struct usb_serial_port *port;
++ int res;
++ int i;
++
++ for (i = 0; i < serial->num_ports; ++i) {
++ port = serial->port[i];
++ if (!tty_port_initialized(&port->port))
++ continue;
++
++ mos7840_port = usb_get_serial_port_data(port);
++
++ mos7840_port->read_urb_busy = true;
++ res = usb_submit_urb(mos7840_port->read_urb, GFP_NOIO);
++ if (res)
++ mos7840_port->read_urb_busy = false;
++ }
++
++ return 0;
++}
++
+ static struct usb_serial_driver moschip7840_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+@@ -1792,6 +1835,8 @@ static struct usb_serial_driver moschip7
+ .port_probe = mos7840_port_probe,
+ .port_remove = mos7840_port_remove,
+ .read_bulk_callback = mos7840_bulk_in_callback,
++ .suspend = mos7840_suspend,
++ .resume = mos7840_resume,
+ };
+
+ static struct usb_serial_driver * const serial_drivers[] = {
--- /dev/null
+From 2604e08ff251dba330e16b65e80074c9c540aad7 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>
+Date: Wed, 26 Jun 2024 15:32:23 +0200
+Subject: USB: serial: option: add Fibocom FM350-GL
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Bjørn Mork <bjorn@mork.no>
+
+commit 2604e08ff251dba330e16b65e80074c9c540aad7 upstream.
+
+FM350-GL is 5G Sub-6 WWAN module which uses M.2 form factor interface.
+It is based on Mediatek's MTK T700 CPU. The module supports PCIe Gen3
+x1 and USB 2.0 and 3.0 interfaces.
+
+The manufacturer states that USB is "for debug" but it has been
+confirmed to be fully functional, except for modem-control requests on
+some of the interfaces.
+
+USB device composition is controlled by AT+GTUSBMODE=<mode> command.
+Two values are currently supported for the <mode>:
+
+40: RNDIS+AT+AP(GNSS)+META+DEBUG+NPT+ADB
+41: RNDIS+AT+AP(GNSS)+META+DEBUG+NPT+ADB+AP(LOG)+AP(META) (default value)
+
+[ Note that the functions above are not ordered by interface number. ]
+
+Mode 40 corresponds to:
+
+T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 22 Spd=480 MxCh= 0
+D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
+P: Vendor=0e8d ProdID=7126 Rev= 0.01
+S: Manufacturer=Fibocom Wireless Inc.
+S: Product=FM350-GL
+C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
+A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
+I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
+E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Mode 41 corresponds to:
+
+T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
+D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
+P: Vendor=0e8d ProdID=7127 Rev= 0.01
+S: Manufacturer=Fibocom Wireless Inc.
+S: Product=FM350-GL
+C:* #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
+A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
+I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
+E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Bjørn Mork <bjorn@mork.no>
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -2230,6 +2230,10 @@ static const struct usb_device_id option
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
++ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x7126, 0xff, 0x00, 0x00),
++ .driver_info = NCTRL(2) },
++ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x7127, 0xff, 0x00, 0x00),
++ .driver_info = NCTRL(2) | NCTRL(3) | NCTRL(4) },
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MPL200),
+ .driver_info = RSVD(1) | RSVD(4) },
--- /dev/null
+From dc6dbe3ed28795b01c712ad8f567728f9c14b01d Mon Sep 17 00:00:00 2001
+From: Mank Wang <mank.wang@netprisma.us>
+Date: Sat, 29 Jun 2024 01:54:45 +0000
+Subject: USB: serial: option: add Netprisma LCUK54 series modules
+
+From: Mank Wang <mank.wang@netprisma.us>
+
+commit dc6dbe3ed28795b01c712ad8f567728f9c14b01d upstream.
+
+Add support for Netprisma LCUK54 series modules.
+
+LCUK54-WRD-LWW(0x3731/0x0100): NetPrisma LCUK54-WWD for Global
+LCUK54-WRD-LWW(0x3731/0x0101): NetPrisma LCUK54-WRD for Global SKU
+LCUK54-WRD-LCN(0x3731/0x0106): NetPrisma LCUK54-WRD for China SKU
+LCUK54-WRD-LWW(0x3731/0x0111): NetPrisma LCUK54-WWD for SA
+LCUK54-WRD-LWW(0x3731/0x0112): NetPrisma LCUK54-WWD for EU
+LCUK54-WRD-LWW(0x3731/0x0113): NetPrisma LCUK54-WWD for NA
+LCUK54-WWD-LCN(0x3731/0x0115): NetPrisma LCUK54-WWD for China EDU
+LCUK54-WWD-LWW(0x3731/0x0116): NetPrisma LCUK54-WWD for Golbal EDU
+
+Above products use the exact same interface layout and option
+driver:
+MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
+
+T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=3731 ProdID=0101 Rev= 5.04
+S: Manufacturer=NetPrisma
+S: Product=LCUK54-WRD
+S: SerialNumber=b6250c36
+C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
+A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
+I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
+E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
+I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
+I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
+E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
+E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
+E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
+E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
+E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
+E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Mank Wang <mank.wang@netprisma.us>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 24 ++++++++++++++++++++++++
+ 1 file changed, 24 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -2333,6 +2333,30 @@ static const struct usb_device_id option
+ .driver_info = RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff), /* Rolling RW135-GL (laptop MBIM) */
+ .driver_info = RSVD(5) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for Global */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0101, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WRD for Global SKU */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0101, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0101, 0xff, 0xff, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0106, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WRD for China SKU */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0106, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0106, 0xff, 0xff, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0111, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for SA */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0111, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0111, 0xff, 0xff, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0112, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for EU */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0112, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0112, 0xff, 0xff, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0113, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for NA */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0113, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0113, 0xff, 0xff, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0115, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for China EDU */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0115, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0115, 0xff, 0xff, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for Golbal EDU */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0x00, 0x40) },
++ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },
--- /dev/null
+From ae420771551bd9f04347c59744dd062332bdec3e Mon Sep 17 00:00:00 2001
+From: Vanillan Wang <vanillanwang@163.com>
+Date: Fri, 31 May 2024 10:40:12 +0800
+Subject: USB: serial: option: add Rolling RW350-GL variants
+
+From: Vanillan Wang <vanillanwang@163.com>
+
+commit ae420771551bd9f04347c59744dd062332bdec3e upstream.
+
+Update the USB serial option driver support for the Rolling
+RW350-GL
+- VID:PID 33f8:0802, RW350-GL are laptop M.2 cards (with
+MBIM interfaces for /Linux/Chrome OS)
+
+Here are the outputs of usb-devices:
+
+usbmode=63: mbim, pipe
+
+T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
+D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
+P: Vendor=33f8 ProdID=0802 Rev=00.01
+S: Manufacturer=Rolling Wireless S.a.r.l.
+S: Product=USB DATA CARD
+C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
+I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
+E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
+I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
+E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+
+usbmode=64: mbim, others at (If#= 5 adb)
+
+MBIM(MI0) + GNSS(MI2) + AP log(MI3) + AP META(MI4) + ADB(MI5) +
+MD AT(MI6) + MD META(MI7) + NPT(MI8) + Debug(MI9)
+
+T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
+D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
+P: Vendor=33f8 ProdID=0802 Rev=00.01
+S: Manufacturer=Rolling Wireless S.a.r.l.
+S: Product=USB DATA CARD
+C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=896mA
+I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
+E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
+I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
+E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
+E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=06(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=07(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=08(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=09(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+E: Ad=8a(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
+
+Signed-off-by: Vanillan Wang <vanillanwang@163.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -2333,6 +2333,8 @@ static const struct usb_device_id option
+ .driver_info = RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff), /* Rolling RW135-GL (laptop MBIM) */
+ .driver_info = RSVD(5) },
++ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0802, 0xff), /* Rolling RW350-GL (laptop MBIM) */
++ .driver_info = RSVD(5) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for Global */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x40) },
--- /dev/null
+From 3c841d54b63e4446383de3238399a3910e47d8e2 Mon Sep 17 00:00:00 2001
+From: Slark Xiao <slark_xiao@163.com>
+Date: Fri, 5 Jul 2024 16:17:09 +0800
+Subject: USB: serial: option: add support for Foxconn T99W651
+
+From: Slark Xiao <slark_xiao@163.com>
+
+commit 3c841d54b63e4446383de3238399a3910e47d8e2 upstream.
+
+T99W651 is a RNDIS based modem device. There are 3 serial ports
+need to be enumerated: Diag, NMEA and AT.
+
+Test evidence as below:
+T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
+D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
+P: Vendor=0489 ProdID=e145 Rev=05.15
+S: Manufacturer=QCOM
+S: Product=SDXPINN-IDP _SN:93B562B2
+S: SerialNumber=82e6fe26
+C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
+I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
+I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
+I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
+I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
+I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
+I: If#=0x5 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
+I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
+
+0&1: RNDIS, 2:AT, 3:NMEA, 4:DIAG, 5:QDSS, 6:ADB
+QDSS is not a serial port.
+
+Signed-off-by: Slark Xiao <slark_xiao@163.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -2294,6 +2294,8 @@ static const struct usb_device_id option
+ .driver_info = RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff), /* Foxconn T99W373 MBIM */
+ .driver_info = RSVD(3) },
++ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe145, 0xff), /* Foxconn T99W651 RNDIS */
++ .driver_info = RSVD(5) | RSVD(6) },
+ { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
+ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+ { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
--- /dev/null
+From 9a590ff283421b71560deded2110dbdcbe1f7d1d Mon Sep 17 00:00:00 2001
+From: Daniele Palmas <dnlplm@gmail.com>
+Date: Tue, 25 Jun 2024 12:27:16 +0200
+Subject: USB: serial: option: add Telit FN912 rmnet compositions
+
+From: Daniele Palmas <dnlplm@gmail.com>
+
+commit 9a590ff283421b71560deded2110dbdcbe1f7d1d upstream.
+
+Add the following Telit FN912 compositions:
+
+0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
+T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
+D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=1bc7 ProdID=3000 Rev=05.15
+S: Manufacturer=Telit Cinterion
+S: Product=FN912
+S: SerialNumber=92c4c4d8
+C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
+I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
+I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
+I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
+I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
+T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
+D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=1bc7 ProdID=3001 Rev=05.15
+S: Manufacturer=Telit Cinterion
+S: Product=FN912
+S: SerialNumber=92c4c4d8
+C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
+I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
+I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
+I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -1425,6 +1425,10 @@ static const struct usb_device_id option
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
+ .driver_info = NCTRL(0) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x3000, 0xff), /* Telit FN912 */
++ .driver_info = RSVD(0) | NCTRL(3) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x3001, 0xff), /* Telit FN912 */
++ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff), /* Telit LE910-S1 (RNDIS) */
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
--- /dev/null
+From 4298e400dbdbf259549d69c349e060652ad53611 Mon Sep 17 00:00:00 2001
+From: Daniele Palmas <dnlplm@gmail.com>
+Date: Thu, 30 May 2024 10:00:53 +0200
+Subject: USB: serial: option: add Telit generic core-dump composition
+
+From: Daniele Palmas <dnlplm@gmail.com>
+
+commit 4298e400dbdbf259549d69c349e060652ad53611 upstream.
+
+Add the following core-dump composition, used in different Telit modems:
+
+0x9000: tty (sahara)
+T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 41 Spd=480 MxCh= 0
+D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=1bc7 ProdID=9000 Rev=00.00
+S: Manufacturer=Telit Cinterion
+S: Product=FN990-dump
+S: SerialNumber=e815bdde
+C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
+I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -1433,6 +1433,8 @@ static const struct usb_device_id option
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff), /* Telit LE910R1 (ECM) */
+ .driver_info = NCTRL(2) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x9000, 0xff), /* Telit generic core-dump device */
++ .driver_info = NCTRL(0) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */
projects / thirdparty / kernel / stable-queue.git / commitdiff
