spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate

Current operation contain the max_freq, so new coming operation may use
new clock rate, need to re-config the clock rate to match the requirement.

Fixes: 26851cf65ffc ("spi: nxp-fspi: Support per spi-mem operation frequency switches")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250922-fspi-fix-v1-1-ff4315359d31@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index f9371f98a65bdc7e5eaa612c0770a6228bdda364..4e82f9e900acb91c6de46559efd265f07cf4437d 100644 (file)
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -404,6 +404,8 @@ struct nxp_fspi {
 #define FSPI_NEED_INIT         BIT(0)
 #define FSPI_DTR_MODE          BIT(1)
        int flags;
+       /* save the previous operation clock rate */
+       unsigned long pre_op_rate;
 };
 
 static inline int needs_ip_only(struct nxp_fspi *f)
@@ -780,11 +782,17 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi,
        uint64_t size_kb;
 
        /*
-        * Return, if previously selected target device is same as current
-        * requested target device. Also the DTR or STR mode do not change.
+        * Return when following condition all meet,
+        * 1, if previously selected target device is same as current
+        *    requested target device.
+        * 2, the DTR or STR mode do not change.
+        * 3, previous operation max rate equals current one.
+        *
+        * For other case, need to re-config.
         */
        if ((f->selected == spi_get_chipselect(spi, 0)) &&
-           (!!(f->flags & FSPI_DTR_MODE) == op_is_dtr))
+           (!!(f->flags & FSPI_DTR_MODE) == op_is_dtr) &&
+           (f->pre_op_rate == op->max_freq))
                return;
 
        /* Reset FLSHxxCR0 registers */
@@ -832,6 +840,8 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi,
        else
                nxp_fspi_dll_override(f);
 
+       f->pre_op_rate = op->max_freq;
+
        f->selected = spi_get_chipselect(spi, 0);
 }