Currently, pcie_clear_device_status() clears the entire PCIe Device Status
register (PCI_EXP_DEVSTA) by writing back the value read from the register,
which affects not only the error status bits but also other writable bits.
According to PCIe r7.0, sec 7.5.3.5, this register contains:
- RW1C error status bits (CED, NFED, FED, URD at bits 0-3): These are the
four error status bits that need to be cleared.
- Read-only bits (AUXPD at bit 4, TRPND at bit 5): Writing to these has
no effect.
- Emergency Power Reduction Detected (bit 6): A RW1C non-error bit
introduced in PCIe r5.0 (2019). This is currently the only writable
non-error bit in the Device Status register. Unconditionally clearing
this bit can interfere with other software components that rely on this
power management indication.
- Reserved bits (RsvdZ): These bits are required to be written as zero.
Writing 1s to them (as the current implementation may do) violates the
specification.
To prevent unintended side effects, modify pcie_clear_device_status() to
only write 1s to the four error status bits (CED, NFED, FED, URD), leaving
the Emergency Power Reduction Detected bit and reserved bits unaffected.
Fixes: ec752f5d54d7 ("PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260211124624.49656-1-xueshuai@linux.alibaba.com
#ifdef CONFIG_PCIEAER
void pcie_clear_device_status(struct pci_dev *dev)
{
- u16 sta;
-
- pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &sta);
- pcie_capability_write_word(dev, PCI_EXP_DEVSTA, sta);
+ pcie_capability_write_word(dev, PCI_EXP_DEVSTA,
+ PCI_EXP_DEVSTA_CED | PCI_EXP_DEVSTA_NFED |
+ PCI_EXP_DEVSTA_FED | PCI_EXP_DEVSTA_URD);
}
#endif