i2c: hisi: Only use the completion interrupt to finish the transfer

[ Upstream commit d98263512684a47e81bcb72a5408958ecd1e60b0 ]

The controller will always generate a completion interrupt when the
transfer is finished normally or not. Currently we use either error or
completion interrupt to finish, this may result the completion
interrupt unhandled and corrupt the next transfer, especially at low
speed mode. Since on error case, the error interrupt will come first
then is the completion interrupt. So only use the completion interrupt
to finish the whole transfer process.

Fixes: d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller")
Reported-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index 8c6c7075c765c502e194d222934b294ba966de89..f5c37d2f536bc3587ac98319f75d96ed5f6c1852 100644 (file)
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -341,7 +341,11 @@ static irqreturn_t hisi_i2c_irq(int irq, void *context)
                hisi_i2c_read_rx_fifo(ctlr);
 
 out:
-       if (int_stat & HISI_I2C_INT_TRANS_CPLT || ctlr->xfer_err) {
+       /*
+        * Only use TRANS_CPLT to indicate the completion. On error cases we'll
+        * get two interrupts, INT_ERR first then TRANS_CPLT.
+        */
+       if (int_stat & HISI_I2C_INT_TRANS_CPLT) {
                hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
                hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
                complete(ctlr->completion);