--- /dev/null
+From 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Wed, 22 Nov 2023 18:15:03 +0100
+Subject: ARM: PL011: Fix DMA support
+
+From: Arnd Bergmann <arnd@arndb.de>
+
+commit 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream.
+
+Since there is no guarantee that the memory returned by
+dma_alloc_coherent() is associated with a 'struct page', using the
+architecture specific phys_to_page() is wrong, but using
+virt_to_page() would be as well.
+
+Stop using sg lists altogether and just use the *_single() functions
+instead. This also simplifies the code a bit since the scatterlists in
+this driver always have only one entry anyway.
+
+https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/
+ Use consistent names for dma buffers
+
+gc: Add a commit log from the initial thread:
+https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/
+ Use consistent names for dma buffers
+
+Fixes: cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.")
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+Cc: stable <stable@kernel.org>
+Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/amba-pl011.c | 112 +++++++++++++++++++---------------------
+ 1 file changed, 54 insertions(+), 58 deletions(-)
+
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -218,17 +218,18 @@ static struct vendor_data vendor_st = {
+
+ /* Deals with DMA transactions */
+
+-struct pl011_sgbuf {
+- struct scatterlist sg;
+- char *buf;
++struct pl011_dmabuf {
++ dma_addr_t dma;
++ size_t len;
++ char *buf;
+ };
+
+ struct pl011_dmarx_data {
+ struct dma_chan *chan;
+ struct completion complete;
+ bool use_buf_b;
+- struct pl011_sgbuf sgbuf_a;
+- struct pl011_sgbuf sgbuf_b;
++ struct pl011_dmabuf dbuf_a;
++ struct pl011_dmabuf dbuf_b;
+ dma_cookie_t cookie;
+ bool running;
+ struct timer_list timer;
+@@ -241,7 +242,8 @@ struct pl011_dmarx_data {
+
+ struct pl011_dmatx_data {
+ struct dma_chan *chan;
+- struct scatterlist sg;
++ dma_addr_t dma;
++ size_t len;
+ char *buf;
+ bool queued;
+ };
+@@ -366,32 +368,24 @@ static int pl011_fifo_to_tty(struct uart
+
+ #define PL011_DMA_BUFFER_SIZE PAGE_SIZE
+
+-static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg,
++static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db,
+ enum dma_data_direction dir)
+ {
+- dma_addr_t dma_addr;
+-
+- sg->buf = dma_alloc_coherent(chan->device->dev,
+- PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL);
+- if (!sg->buf)
++ db->buf = dma_alloc_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE,
++ &db->dma, GFP_KERNEL);
++ if (!db->buf)
+ return -ENOMEM;
+-
+- sg_init_table(&sg->sg, 1);
+- sg_set_page(&sg->sg, phys_to_page(dma_addr),
+- PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr));
+- sg_dma_address(&sg->sg) = dma_addr;
+- sg_dma_len(&sg->sg) = PL011_DMA_BUFFER_SIZE;
++ db->len = PL011_DMA_BUFFER_SIZE;
+
+ return 0;
+ }
+
+-static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
++static void pl011_dmabuf_free(struct dma_chan *chan, struct pl011_dmabuf *db,
+ enum dma_data_direction dir)
+ {
+- if (sg->buf) {
++ if (db->buf) {
+ dma_free_coherent(chan->device->dev,
+- PL011_DMA_BUFFER_SIZE, sg->buf,
+- sg_dma_address(&sg->sg));
++ PL011_DMA_BUFFER_SIZE, db->buf, db->dma);
+ }
+ }
+
+@@ -552,8 +546,8 @@ static void pl011_dma_tx_callback(void *
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+ if (uap->dmatx.queued)
+- dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1,
+- DMA_TO_DEVICE);
++ dma_unmap_single(dmatx->chan->device->dev, dmatx->dma,
++ dmatx->len, DMA_TO_DEVICE);
+
+ dmacr = uap->dmacr;
+ uap->dmacr = dmacr & ~UART011_TXDMAE;
+@@ -639,18 +633,19 @@ static int pl011_dma_tx_refill(struct ua
+ memcpy(&dmatx->buf[first], &xmit->buf[0], second);
+ }
+
+- dmatx->sg.length = count;
+-
+- if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) {
++ dmatx->len = count;
++ dmatx->dma = dma_map_single(dma_dev->dev, dmatx->buf, count,
++ DMA_TO_DEVICE);
++ if (dmatx->dma == DMA_MAPPING_ERROR) {
+ uap->dmatx.queued = false;
+ dev_dbg(uap->port.dev, "unable to map TX DMA\n");
+ return -EBUSY;
+ }
+
+- desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV,
++ desc = dmaengine_prep_slave_single(chan, dmatx->dma, dmatx->len, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+- dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
++ dma_unmap_single(dma_dev->dev, dmatx->dma, dmatx->len, DMA_TO_DEVICE);
+ uap->dmatx.queued = false;
+ /*
+ * If DMA cannot be used right now, we complete this
+@@ -813,8 +808,8 @@ __acquires(&uap->port.lock)
+ dmaengine_terminate_async(uap->dmatx.chan);
+
+ if (uap->dmatx.queued) {
+- dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
+- DMA_TO_DEVICE);
++ dma_unmap_single(uap->dmatx.chan->device->dev, uap->dmatx.dma,
++ uap->dmatx.len, DMA_TO_DEVICE);
+ uap->dmatx.queued = false;
+ uap->dmacr &= ~UART011_TXDMAE;
+ pl011_write(uap->dmacr, uap, REG_DMACR);
+@@ -828,15 +823,15 @@ static int pl011_dma_rx_trigger_dma(stru
+ struct dma_chan *rxchan = uap->dmarx.chan;
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ struct dma_async_tx_descriptor *desc;
+- struct pl011_sgbuf *sgbuf;
++ struct pl011_dmabuf *dbuf;
+
+ if (!rxchan)
+ return -EIO;
+
+ /* Start the RX DMA job */
+- sgbuf = uap->dmarx.use_buf_b ?
+- &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
+- desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1,
++ dbuf = uap->dmarx.use_buf_b ?
++ &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
++ desc = dmaengine_prep_slave_single(rxchan, dbuf->dma, dbuf->len,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ /*
+@@ -876,8 +871,8 @@ static void pl011_dma_rx_chars(struct ua
+ bool readfifo)
+ {
+ struct tty_port *port = &uap->port.state->port;
+- struct pl011_sgbuf *sgbuf = use_buf_b ?
+- &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
++ struct pl011_dmabuf *dbuf = use_buf_b ?
++ &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
+ int dma_count = 0;
+ u32 fifotaken = 0; /* only used for vdbg() */
+
+@@ -886,7 +881,7 @@ static void pl011_dma_rx_chars(struct ua
+
+ if (uap->dmarx.poll_rate) {
+ /* The data can be taken by polling */
+- dmataken = sgbuf->sg.length - dmarx->last_residue;
++ dmataken = dbuf->len - dmarx->last_residue;
+ /* Recalculate the pending size */
+ if (pending >= dmataken)
+ pending -= dmataken;
+@@ -900,7 +895,7 @@ static void pl011_dma_rx_chars(struct ua
+ * Note that tty_insert_flip_buf() tries to take as many chars
+ * as it can.
+ */
+- dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
++ dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
+ pending);
+
+ uap->port.icount.rx += dma_count;
+@@ -911,7 +906,7 @@ static void pl011_dma_rx_chars(struct ua
+
+ /* Reset the last_residue for Rx DMA poll */
+ if (uap->dmarx.poll_rate)
+- dmarx->last_residue = sgbuf->sg.length;
++ dmarx->last_residue = dbuf->len;
+
+ /*
+ * Only continue with trying to read the FIFO if all DMA chars have
+@@ -946,8 +941,8 @@ static void pl011_dma_rx_irq(struct uart
+ {
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ struct dma_chan *rxchan = dmarx->chan;
+- struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ?
+- &dmarx->sgbuf_b : &dmarx->sgbuf_a;
++ struct pl011_dmabuf *dbuf = dmarx->use_buf_b ?
++ &dmarx->dbuf_b : &dmarx->dbuf_a;
+ size_t pending;
+ struct dma_tx_state state;
+ enum dma_status dmastat;
+@@ -969,7 +964,7 @@ static void pl011_dma_rx_irq(struct uart
+ pl011_write(uap->dmacr, uap, REG_DMACR);
+ uap->dmarx.running = false;
+
+- pending = sgbuf->sg.length - state.residue;
++ pending = dbuf->len - state.residue;
+ BUG_ON(pending > PL011_DMA_BUFFER_SIZE);
+ /* Then we terminate the transfer - we now know our residue */
+ dmaengine_terminate_all(rxchan);
+@@ -996,8 +991,8 @@ static void pl011_dma_rx_callback(void *
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ struct dma_chan *rxchan = dmarx->chan;
+ bool lastbuf = dmarx->use_buf_b;
+- struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ?
+- &dmarx->sgbuf_b : &dmarx->sgbuf_a;
++ struct pl011_dmabuf *dbuf = dmarx->use_buf_b ?
++ &dmarx->dbuf_b : &dmarx->dbuf_a;
+ size_t pending;
+ struct dma_tx_state state;
+ int ret;
+@@ -1015,7 +1010,7 @@ static void pl011_dma_rx_callback(void *
+ * the DMA irq handler. So we check the residue here.
+ */
+ rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state);
+- pending = sgbuf->sg.length - state.residue;
++ pending = dbuf->len - state.residue;
+ BUG_ON(pending > PL011_DMA_BUFFER_SIZE);
+ /* Then we terminate the transfer - we now know our residue */
+ dmaengine_terminate_all(rxchan);
+@@ -1067,16 +1062,16 @@ static void pl011_dma_rx_poll(struct tim
+ unsigned long flags;
+ unsigned int dmataken = 0;
+ unsigned int size = 0;
+- struct pl011_sgbuf *sgbuf;
++ struct pl011_dmabuf *dbuf;
+ int dma_count;
+ struct dma_tx_state state;
+
+- sgbuf = dmarx->use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
++ dbuf = dmarx->use_buf_b ? &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
+ rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state);
+ if (likely(state.residue < dmarx->last_residue)) {
+- dmataken = sgbuf->sg.length - dmarx->last_residue;
++ dmataken = dbuf->len - dmarx->last_residue;
+ size = dmarx->last_residue - state.residue;
+- dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
++ dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
+ size);
+ if (dma_count == size)
+ dmarx->last_residue = state.residue;
+@@ -1123,7 +1118,7 @@ static void pl011_dma_startup(struct uar
+ return;
+ }
+
+- sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE);
++ uap->dmatx.len = PL011_DMA_BUFFER_SIZE;
+
+ /* The DMA buffer is now the FIFO the TTY subsystem can use */
+ uap->port.fifosize = PL011_DMA_BUFFER_SIZE;
+@@ -1133,7 +1128,7 @@ static void pl011_dma_startup(struct uar
+ goto skip_rx;
+
+ /* Allocate and map DMA RX buffers */
+- ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_a,
++ ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_a,
+ DMA_FROM_DEVICE);
+ if (ret) {
+ dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
+@@ -1141,12 +1136,12 @@ static void pl011_dma_startup(struct uar
+ goto skip_rx;
+ }
+
+- ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_b,
++ ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_b,
+ DMA_FROM_DEVICE);
+ if (ret) {
+ dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
+ "RX buffer B", ret);
+- pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a,
++ pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a,
+ DMA_FROM_DEVICE);
+ goto skip_rx;
+ }
+@@ -1200,8 +1195,9 @@ static void pl011_dma_shutdown(struct ua
+ /* In theory, this should already be done by pl011_dma_flush_buffer */
+ dmaengine_terminate_all(uap->dmatx.chan);
+ if (uap->dmatx.queued) {
+- dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
+- DMA_TO_DEVICE);
++ dma_unmap_single(uap->dmatx.chan->device->dev,
++ uap->dmatx.dma, uap->dmatx.len,
++ DMA_TO_DEVICE);
+ uap->dmatx.queued = false;
+ }
+
+@@ -1212,8 +1208,8 @@ static void pl011_dma_shutdown(struct ua
+ if (uap->using_rx_dma) {
+ dmaengine_terminate_all(uap->dmarx.chan);
+ /* Clean up the RX DMA */
+- pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE);
+- pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE);
++ pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, DMA_FROM_DEVICE);
++ pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_b, DMA_FROM_DEVICE);
+ if (uap->dmarx.poll_rate)
+ del_timer_sync(&uap->dmarx.timer);
+ uap->using_rx_dma = false;
+++ /dev/null
-From 716d4e5373e9d1ae993485ab2e3b893bf7104fb1 Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Mon, 4 Dec 2023 12:47:36 +0000
-Subject: ASoC: qcom: sc8280xp: Limit speaker digital volumes
-
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-
-commit 716d4e5373e9d1ae993485ab2e3b893bf7104fb1 upstream.
-
-Limit the speaker digital gains to 0dB so that the users will not damage them.
-Currently there is a limit in UCM, but this does not stop the user form
-changing the digital gains from command line. So limit this in driver
-which makes the speakers more safer without active speaker protection in
-place.
-
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
-Tested-by: Johan Hovold <johan+linaro@kernel.org>
-Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- sound/soc/qcom/sc8280xp.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/sound/soc/qcom/sc8280xp.c
-+++ b/sound/soc/qcom/sc8280xp.c
-@@ -27,6 +27,23 @@ struct sc8280xp_snd_data {
- static int sc8280xp_snd_init(struct snd_soc_pcm_runtime *rtd)
- {
- struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
-+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
-+ struct snd_soc_card *card = rtd->card;
-+
-+ switch (cpu_dai->id) {
-+ case WSA_CODEC_DMA_RX_0:
-+ case WSA_CODEC_DMA_RX_1:
-+ /*
-+ * set limit of 0dB on Digital Volume for Speakers,
-+ * this can prevent damage of speakers to some extent without
-+ * active speaker protection
-+ */
-+ snd_soc_limit_volume(card, "WSA_RX0 Digital Volume", 84);
-+ snd_soc_limit_volume(card, "WSA_RX1 Digital Volume", 84);
-+ break;
-+ default:
-+ break;
-+ }
-
- return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
- }
--- /dev/null
+From 7b2404a886f8b91250c31855d287e632123e1746 Mon Sep 17 00:00:00 2001
+From: David Howells <dhowells@redhat.com>
+Date: Fri, 1 Dec 2023 00:22:00 +0000
+Subject: cifs: Fix flushing, invalidation and file size with copy_file_range()
+
+From: David Howells <dhowells@redhat.com>
+
+commit 7b2404a886f8b91250c31855d287e632123e1746 upstream.
+
+Fix a number of issues in the cifs filesystem implementation of the
+copy_file_range() syscall in cifs_file_copychunk_range().
+
+Firstly, the invalidation of the destination range is handled incorrectly:
+We shouldn't just invalidate the whole file as dirty data in the file may
+get lost and we can't just call truncate_inode_pages_range() to invalidate
+the destination range as that will erase parts of a partial folio at each
+end whilst invalidating and discarding all the folios in the middle. We
+need to force all the folios covering the range to be reloaded, but we
+mustn't lose dirty data in them that's not in the destination range.
+
+Further, we shouldn't simply round out the range to PAGE_SIZE at each end
+as cifs should move to support multipage folios.
+
+Secondly, there's an issue whereby a write may have extended the file
+locally, but not have been written back yet. This can leaves the local
+idea of the EOF at a later point than the server's EOF. If a copy request
+is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
+(which gets translated to -EIO locally) if the copy source extends past the
+server's EOF.
+
+Fix this by:
+
+ (0) Flush the source region (already done). The flush does nothing and
+ the EOF isn't moved if the source region has no dirty data.
+
+ (1) Move the EOF to the end of the source region if it isn't already at
+ least at this point. If we can't do this, for instance if the server
+ doesn't support it, just flush the entire source file.
+
+ (2) Find the folio (if present) at each end of the range, flushing it and
+ increasing the region-to-be-invalidated to cover those in their
+ entirety.
+
+ (3) Fully discard all the folios covering the range as we want them to be
+ reloaded.
+
+ (4) Then perform the copy.
+
+Thirdly, set i_size after doing the copychunk_range operation as this value
+may be used by various things internally. stat() hides the issue because
+setting ->time to 0 causes cifs_getatr() to revalidate the attributes.
+
+These were causing the generic/075 xfstest to fail.
+
+Fixes: 620d8745b35d ("Introduce cifs_copy_file_range()")
+Cc: stable@vger.kernel.org
+Signed-off-by: David Howells <dhowells@redhat.com>
+cc: Paulo Alcantara <pc@manguebit.com>
+cc: Shyam Prasad N <nspmangalore@gmail.com>
+cc: Rohith Surabattula <rohiths.msft@gmail.com>
+cc: Matthew Wilcox <willy@infradead.org>
+cc: Jeff Layton <jlayton@kernel.org>
+cc: linux-cifs@vger.kernel.org
+cc: linux-mm@kvack.org
+Signed-off-by: David Howells <dhowells@redhat.com>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ fs/smb/client/cifsfs.c | 102 +++++++++++++++++++++++++++++++++++++++++++++++--
+ 1 file changed, 99 insertions(+), 3 deletions(-)
+
+--- a/fs/smb/client/cifsfs.c
++++ b/fs/smb/client/cifsfs.c
+@@ -1196,6 +1196,72 @@ const struct inode_operations cifs_symli
+ .listxattr = cifs_listxattr,
+ };
+
++/*
++ * Advance the EOF marker to after the source range.
++ */
++static int cifs_precopy_set_eof(struct inode *src_inode, struct cifsInodeInfo *src_cifsi,
++ struct cifs_tcon *src_tcon,
++ unsigned int xid, loff_t src_end)
++{
++ struct cifsFileInfo *writeable_srcfile;
++ int rc = -EINVAL;
++
++ writeable_srcfile = find_writable_file(src_cifsi, FIND_WR_FSUID_ONLY);
++ if (writeable_srcfile) {
++ if (src_tcon->ses->server->ops->set_file_size)
++ rc = src_tcon->ses->server->ops->set_file_size(
++ xid, src_tcon, writeable_srcfile,
++ src_inode->i_size, true /* no need to set sparse */);
++ else
++ rc = -ENOSYS;
++ cifsFileInfo_put(writeable_srcfile);
++ cifs_dbg(FYI, "SetFSize for copychunk rc = %d\n", rc);
++ }
++
++ if (rc < 0)
++ goto set_failed;
++
++ netfs_resize_file(&src_cifsi->netfs, src_end);
++ fscache_resize_cookie(cifs_inode_cookie(src_inode), src_end);
++ return 0;
++
++set_failed:
++ return filemap_write_and_wait(src_inode->i_mapping);
++}
++
++/*
++ * Flush out either the folio that overlaps the beginning of a range in which
++ * pos resides or the folio that overlaps the end of a range unless that folio
++ * is entirely within the range we're going to invalidate. We extend the flush
++ * bounds to encompass the folio.
++ */
++static int cifs_flush_folio(struct inode *inode, loff_t pos, loff_t *_fstart, loff_t *_fend,
++ bool first)
++{
++ struct folio *folio;
++ unsigned long long fpos, fend;
++ pgoff_t index = pos / PAGE_SIZE;
++ size_t size;
++ int rc = 0;
++
++ folio = filemap_get_folio(inode->i_mapping, index);
++ if (IS_ERR(folio))
++ return 0;
++
++ size = folio_size(folio);
++ fpos = folio_pos(folio);
++ fend = fpos + size - 1;
++ *_fstart = min_t(unsigned long long, *_fstart, fpos);
++ *_fend = max_t(unsigned long long, *_fend, fend);
++ if ((first && pos == fpos) || (!first && pos == fend))
++ goto out;
++
++ rc = filemap_write_and_wait_range(inode->i_mapping, fpos, fend);
++out:
++ folio_put(folio);
++ return rc;
++}
++
+ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off,
+ struct file *dst_file, loff_t destoff, loff_t len,
+ unsigned int remap_flags)
+@@ -1265,10 +1331,12 @@ ssize_t cifs_file_copychunk_range(unsign
+ {
+ struct inode *src_inode = file_inode(src_file);
+ struct inode *target_inode = file_inode(dst_file);
++ struct cifsInodeInfo *src_cifsi = CIFS_I(src_inode);
+ struct cifsFileInfo *smb_file_src;
+ struct cifsFileInfo *smb_file_target;
+ struct cifs_tcon *src_tcon;
+ struct cifs_tcon *target_tcon;
++ unsigned long long destend, fstart, fend;
+ ssize_t rc;
+
+ cifs_dbg(FYI, "copychunk range\n");
+@@ -1308,13 +1376,41 @@ ssize_t cifs_file_copychunk_range(unsign
+ if (rc)
+ goto unlock;
+
+- /* should we flush first and last page first */
+- truncate_inode_pages(&target_inode->i_data, 0);
++ /* The server-side copy will fail if the source crosses the EOF marker.
++ * Advance the EOF marker after the flush above to the end of the range
++ * if it's short of that.
++ */
++ if (src_cifsi->server_eof < off + len) {
++ rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len);
++ if (rc < 0)
++ goto unlock;
++ }
++
++ destend = destoff + len - 1;
++
++ /* Flush the folios at either end of the destination range to prevent
++ * accidental loss of dirty data outside of the range.
++ */
++ fstart = destoff;
++ fend = destend;
++
++ rc = cifs_flush_folio(target_inode, destoff, &fstart, &fend, true);
++ if (rc)
++ goto unlock;
++ rc = cifs_flush_folio(target_inode, destend, &fstart, &fend, false);
++ if (rc)
++ goto unlock;
++
++ /* Discard all the folios that overlap the destination region. */
++ truncate_inode_pages_range(&target_inode->i_data, fstart, fend);
+
+ rc = file_modified(dst_file);
+- if (!rc)
++ if (!rc) {
+ rc = target_tcon->ses->server->ops->copychunk_range(xid,
+ smb_file_src, smb_file_target, off, len, destoff);
++ if (rc > 0 && destoff + rc > i_size_read(target_inode))
++ truncate_setsize(target_inode, destoff + rc);
++ }
+
+ file_accessed(src_file);
+
--- /dev/null
+From c54fc3a4f375663f2361a9cbb2955fb4ef912879 Mon Sep 17 00:00:00 2001
+From: David Howells <dhowells@redhat.com>
+Date: Fri, 1 Dec 2023 00:22:01 +0000
+Subject: cifs: Fix flushing, invalidation and file size with FICLONE
+
+From: David Howells <dhowells@redhat.com>
+
+commit c54fc3a4f375663f2361a9cbb2955fb4ef912879 upstream.
+
+Fix a number of issues in the cifs filesystem implementation of the FICLONE
+ioctl in cifs_remap_file_range(). This is analogous to the previously
+fixed bug in cifs_file_copychunk_range() and can share the helper
+functions.
+
+Firstly, the invalidation of the destination range is handled incorrectly:
+We shouldn't just invalidate the whole file as dirty data in the file may
+get lost and we can't just call truncate_inode_pages_range() to invalidate
+the destination range as that will erase parts of a partial folio at each
+end whilst invalidating and discarding all the folios in the middle. We
+need to force all the folios covering the range to be reloaded, but we
+mustn't lose dirty data in them that's not in the destination range.
+
+Further, we shouldn't simply round out the range to PAGE_SIZE at each end
+as cifs should move to support multipage folios.
+
+Secondly, there's an issue whereby a write may have extended the file
+locally, but not have been written back yet. This can leaves the local
+idea of the EOF at a later point than the server's EOF. If a clone request
+is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
+(which gets translated to -EIO locally) if the clone source extends past
+the server's EOF.
+
+Fix this by:
+
+ (0) Flush the source region (already done). The flush does nothing and
+ the EOF isn't moved if the source region has no dirty data.
+
+ (1) Move the EOF to the end of the source region if it isn't already at
+ least at this point. If we can't do this, for instance if the server
+ doesn't support it, just flush the entire source file.
+
+ (2) Find the folio (if present) at each end of the range, flushing it and
+ increasing the region-to-be-invalidated to cover those in their
+ entirety.
+
+ (3) Fully discard all the folios covering the range as we want them to be
+ reloaded.
+
+ (4) Then perform the extent duplication.
+
+Thirdly, set i_size after doing the duplicate_extents operation as this
+value may be used by various things internally. stat() hides the issue
+because setting ->time to 0 causes cifs_getatr() to revalidate the
+attributes.
+
+These were causing the cifs/001 xfstest to fail.
+
+Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer")
+Signed-off-by: David Howells <dhowells@redhat.com>
+Cc: stable@vger.kernel.org
+cc: Christoph Hellwig <hch@lst.de>
+cc: Paulo Alcantara <pc@manguebit.com>
+cc: Shyam Prasad N <nspmangalore@gmail.com>
+cc: Rohith Surabattula <rohiths.msft@gmail.com>
+cc: Matthew Wilcox <willy@infradead.org>
+cc: Jeff Layton <jlayton@kernel.org>
+cc: linux-cifs@vger.kernel.org
+cc: linux-mm@kvack.org
+Signed-off-by: David Howells <dhowells@redhat.com>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ fs/smb/client/cifsfs.c | 68 +++++++++++++++++++++++++++++++++++++++++--------
+ 1 file changed, 57 insertions(+), 11 deletions(-)
+
+--- a/fs/smb/client/cifsfs.c
++++ b/fs/smb/client/cifsfs.c
+@@ -1268,9 +1268,12 @@ static loff_t cifs_remap_file_range(stru
+ {
+ struct inode *src_inode = file_inode(src_file);
+ struct inode *target_inode = file_inode(dst_file);
++ struct cifsInodeInfo *src_cifsi = CIFS_I(src_inode);
++ struct cifsInodeInfo *target_cifsi = CIFS_I(target_inode);
+ struct cifsFileInfo *smb_file_src = src_file->private_data;
+- struct cifsFileInfo *smb_file_target;
+- struct cifs_tcon *target_tcon;
++ struct cifsFileInfo *smb_file_target = dst_file->private_data;
++ struct cifs_tcon *target_tcon, *src_tcon;
++ unsigned long long destend, fstart, fend, new_size;
+ unsigned int xid;
+ int rc;
+
+@@ -1283,13 +1286,13 @@ static loff_t cifs_remap_file_range(stru
+
+ xid = get_xid();
+
+- if (!src_file->private_data || !dst_file->private_data) {
++ if (!smb_file_src || !smb_file_target) {
+ rc = -EBADF;
+ cifs_dbg(VFS, "missing cifsFileInfo on copy range src file\n");
+ goto out;
+ }
+
+- smb_file_target = dst_file->private_data;
++ src_tcon = tlink_tcon(smb_file_src->tlink);
+ target_tcon = tlink_tcon(smb_file_target->tlink);
+
+ /*
+@@ -1302,20 +1305,63 @@ static loff_t cifs_remap_file_range(stru
+ if (len == 0)
+ len = src_inode->i_size - off;
+
+- cifs_dbg(FYI, "about to flush pages\n");
+- /* should we flush first and last page first */
+- truncate_inode_pages_range(&target_inode->i_data, destoff,
+- PAGE_ALIGN(destoff + len)-1);
++ cifs_dbg(FYI, "clone range\n");
++
++ /* Flush the source buffer */
++ rc = filemap_write_and_wait_range(src_inode->i_mapping, off,
++ off + len - 1);
++ if (rc)
++ goto unlock;
++
++ /* The server-side copy will fail if the source crosses the EOF marker.
++ * Advance the EOF marker after the flush above to the end of the range
++ * if it's short of that.
++ */
++ if (src_cifsi->netfs.remote_i_size < off + len) {
++ rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len);
++ if (rc < 0)
++ goto unlock;
++ }
++
++ new_size = destoff + len;
++ destend = destoff + len - 1;
+
+- if (target_tcon->ses->server->ops->duplicate_extents)
++ /* Flush the folios at either end of the destination range to prevent
++ * accidental loss of dirty data outside of the range.
++ */
++ fstart = destoff;
++ fend = destend;
++
++ rc = cifs_flush_folio(target_inode, destoff, &fstart, &fend, true);
++ if (rc)
++ goto unlock;
++ rc = cifs_flush_folio(target_inode, destend, &fstart, &fend, false);
++ if (rc)
++ goto unlock;
++
++ /* Discard all the folios that overlap the destination region. */
++ cifs_dbg(FYI, "about to discard pages %llx-%llx\n", fstart, fend);
++ truncate_inode_pages_range(&target_inode->i_data, fstart, fend);
++
++ fscache_invalidate(cifs_inode_cookie(target_inode), NULL,
++ i_size_read(target_inode), 0);
++
++ rc = -EOPNOTSUPP;
++ if (target_tcon->ses->server->ops->duplicate_extents) {
+ rc = target_tcon->ses->server->ops->duplicate_extents(xid,
+ smb_file_src, smb_file_target, off, len, destoff);
+- else
+- rc = -EOPNOTSUPP;
++ if (rc == 0 && new_size > i_size_read(target_inode)) {
++ truncate_setsize(target_inode, new_size);
++ netfs_resize_file(&target_cifsi->netfs, new_size);
++ fscache_resize_cookie(cifs_inode_cookie(target_inode),
++ new_size);
++ }
++ }
+
+ /* force revalidate of size and timestamps of target file now
+ that target is updated on the server */
+ CIFS_I(target_inode)->time = 0;
++unlock:
+ /* although unlocking in the reverse order from locking is not
+ strictly necessary here it is a little cleaner to be consistent */
+ unlock_two_nondirectories(src_inode, target_inode);
--- /dev/null
+From 691a41d8da4b34fe72f09393505f55f28a8f34ec Mon Sep 17 00:00:00 2001
+From: David Howells <dhowells@redhat.com>
+Date: Mon, 4 Dec 2023 14:01:59 +0000
+Subject: cifs: Fix non-availability of dedup breaking generic/304
+
+From: David Howells <dhowells@redhat.com>
+
+commit 691a41d8da4b34fe72f09393505f55f28a8f34ec upstream.
+
+Deduplication isn't supported on cifs, but cifs doesn't reject it, instead
+treating it as extent duplication/cloning. This can cause generic/304 to go
+silly and run for hours on end.
+
+Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in
+->remap_file_range().
+
+Note that it's unclear whether or not commit b073a08016a1 is meant to cause
+cifs to return an error if REMAP_FILE_DEDUP.
+
+Fixes: b073a08016a1 ("cifs: fix that return -EINVAL when do dedupe operation")
+Cc: stable@vger.kernel.org
+Suggested-by: Dave Chinner <david@fromorbit.com>
+cc: Xiaoli Feng <fengxiaoli0714@gmail.com>
+cc: Shyam Prasad N <nspmangalore@gmail.com>
+cc: Rohith Surabattula <rohiths.msft@gmail.com>
+cc: Jeff Layton <jlayton@kernel.org>
+cc: Darrick Wong <darrick.wong@oracle.com>
+cc: fstests@vger.kernel.org
+cc: linux-cifs@vger.kernel.org
+cc: linux-fsdevel@vger.kernel.org
+Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/
+Signed-off-by: David Howells <dhowells@redhat.com>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ fs/smb/client/cifsfs.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/fs/smb/client/cifsfs.c
++++ b/fs/smb/client/cifsfs.c
+@@ -1208,7 +1208,9 @@ static loff_t cifs_remap_file_range(stru
+ unsigned int xid;
+ int rc;
+
+- if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY))
++ if (remap_flags & REMAP_FILE_DEDUP)
++ return -EOPNOTSUPP;
++ if (remap_flags & ~REMAP_FILE_ADVISORY)
+ return -EINVAL;
+
+ cifs_dbg(FYI, "clone range\n");
--- /dev/null
+From af54d778a03853801d681c98c0c2a6c316ef9ca7 Mon Sep 17 00:00:00 2001
+From: Mukesh Ojha <quic_mojha@quicinc.com>
+Date: Fri, 17 Nov 2023 20:19:32 +0530
+Subject: devcoredump: Send uevent once devcd is ready
+
+From: Mukesh Ojha <quic_mojha@quicinc.com>
+
+commit af54d778a03853801d681c98c0c2a6c316ef9ca7 upstream.
+
+dev_coredumpm() creates a devcoredump device and adds it
+to the core kernel framework which eventually end up
+sending uevent to the user space and later creates a
+symbolic link to the failed device. An application
+running in userspace may be interested in this symbolic
+link to get the name of the failed device.
+
+In a issue scenario, once uevent sent to the user space
+it start reading '/sys/class/devcoredump/devcdX/failing_device'
+to get the actual name of the device which might not been
+created and it is in its path of creation.
+
+To fix this, suppress sending uevent till the failing device
+symbolic link gets created and send uevent once symbolic
+link is created successfully.
+
+Fixes: 833c95456a70 ("device coredump: add new device coredump class")
+Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
+Cc: stable@vger.kernel.org
+Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/base/devcoredump.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/base/devcoredump.c
++++ b/drivers/base/devcoredump.c
+@@ -362,6 +362,7 @@ void dev_coredumpm(struct device *dev, s
+ devcd->devcd_dev.class = &devcd_class;
+
+ mutex_lock(&devcd->mutex);
++ dev_set_uevent_suppress(&devcd->devcd_dev, true);
+ if (device_add(&devcd->devcd_dev))
+ goto put_device;
+
+@@ -376,6 +377,8 @@ void dev_coredumpm(struct device *dev, s
+ "devcoredump"))
+ dev_warn(dev, "devcoredump create_link failed\n");
+
++ dev_set_uevent_suppress(&devcd->devcd_dev, false);
++ kobject_uevent(&devcd->devcd_dev.kobj, KOBJ_ADD);
+ INIT_DELAYED_WORK(&devcd->del_wk, devcd_del);
+ schedule_delayed_work(&devcd->del_wk, DEVCD_TIMEOUT);
+ mutex_unlock(&devcd->mutex);
--- /dev/null
+From d839a656d0f3caca9f96e9bf912fd394ac6a11bc Mon Sep 17 00:00:00 2001
+From: JP Kobryn <inwardvessel@gmail.com>
+Date: Fri, 1 Dec 2023 14:53:55 +0900
+Subject: kprobes: consistent rcu api usage for kretprobe holder
+
+From: JP Kobryn <inwardvessel@gmail.com>
+
+commit d839a656d0f3caca9f96e9bf912fd394ac6a11bc upstream.
+
+It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
+RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
+The thought behind this patch is to make use of the RCU API where possible
+when accessing this pointer so that the needed barriers are always in place
+and to self-document the code.
+
+The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
+done to the "rp" pointer are changed to make use of the RCU macro for
+assignment. For the single read, the implementation of get_kretprobe()
+is simplified by making use of an RCU macro which accomplishes the same,
+but note that the log warning text will be more generic.
+
+I did find that there is a difference in assembly generated between the
+usage of the RCU macros vs without. For example, on arm64, when using
+rcu_assign_pointer(), the corresponding store instruction is a
+store-release (STLR) which has an implicit barrier. When normal assignment
+is done, a regular store (STR) is found. In the macro case, this seems to
+be a result of rcu_assign_pointer() using smp_store_release() when the
+value to write is not NULL.
+
+Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
+
+Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
+Cc: stable@vger.kernel.org
+Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
+Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
+Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
+Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ include/linux/kprobes.h | 7 ++-----
+ kernel/kprobes.c | 4 ++--
+ 2 files changed, 4 insertions(+), 7 deletions(-)
+
+--- a/include/linux/kprobes.h
++++ b/include/linux/kprobes.h
+@@ -140,7 +140,7 @@ static inline bool kprobe_ftrace(struct
+ *
+ */
+ struct kretprobe_holder {
+- struct kretprobe *rp;
++ struct kretprobe __rcu *rp;
+ refcount_t ref;
+ };
+
+@@ -248,10 +248,7 @@ unsigned long kretprobe_trampoline_handl
+
+ static nokprobe_inline struct kretprobe *get_kretprobe(struct kretprobe_instance *ri)
+ {
+- RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(),
+- "Kretprobe is accessed from instance under preemptive context");
+-
+- return READ_ONCE(ri->rph->rp);
++ return rcu_dereference_check(ri->rph->rp, rcu_read_lock_any_held());
+ }
+
+ static nokprobe_inline unsigned long get_kretprobe_retaddr(struct kretprobe_instance *ri)
+--- a/kernel/kprobes.c
++++ b/kernel/kprobes.c
+@@ -2253,7 +2253,7 @@ int register_kretprobe(struct kretprobe
+ if (!rp->rph)
+ return -ENOMEM;
+
+- rp->rph->rp = rp;
++ rcu_assign_pointer(rp->rph->rp, rp);
+ for (i = 0; i < rp->maxactive; i++) {
+ inst = kzalloc(struct_size(inst, data, rp->data_size), GFP_KERNEL);
+ if (inst == NULL) {
+@@ -2313,7 +2313,7 @@ void unregister_kretprobes(struct kretpr
+ #ifdef CONFIG_KRETPROBE_ON_RETHOOK
+ rethook_free(rps[i]->rh);
+ #else
+- rps[i]->rph->rp = NULL;
++ rcu_assign_pointer(rps[i]->rph->rp, NULL);
+ #endif
+ }
+ mutex_unlock(&kprobe_mutex);
--- /dev/null
+From 27072b8e18a73ffeffb1c140939023915a35134b Mon Sep 17 00:00:00 2001
+From: Claudio Imbrenda <imbrenda@linux.ibm.com>
+Date: Thu, 9 Nov 2023 13:36:24 +0100
+Subject: KVM: s390/mm: Properly reset no-dat
+
+From: Claudio Imbrenda <imbrenda@linux.ibm.com>
+
+commit 27072b8e18a73ffeffb1c140939023915a35134b upstream.
+
+When the CMMA state needs to be reset, the no-dat bit also needs to be
+reset. Failure to do so could cause issues in the guest, since the
+guest expects the bit to be cleared after a reset.
+
+Cc: <stable@vger.kernel.org>
+Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
+Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com>
+Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/s390/mm/pgtable.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/s390/mm/pgtable.c
++++ b/arch/s390/mm/pgtable.c
+@@ -756,7 +756,7 @@ void ptep_zap_unused(struct mm_struct *m
+ pte_clear(mm, addr, ptep);
+ }
+ if (reset)
+- pgste_val(pgste) &= ~_PGSTE_GPS_USAGE_MASK;
++ pgste_val(pgste) &= ~(_PGSTE_GPS_USAGE_MASK | _PGSTE_GPS_NODAT);
+ pgste_set_unlock(ptep, pgste);
+ preempt_enable();
+ }
--- /dev/null
+From 4cdf351d3630a640ab6a05721ef055b9df62277f Mon Sep 17 00:00:00 2001
+From: Sean Christopherson <seanjc@google.com>
+Date: Fri, 7 May 2021 09:59:46 -0700
+Subject: KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
+
+From: Sean Christopherson <seanjc@google.com>
+
+commit 4cdf351d3630a640ab6a05721ef055b9df62277f upstream.
+
+In general, activating long mode involves setting the EFER_LME bit in
+the EFER register and then enabling the X86_CR0_PG bit in the CR0
+register. At this point, the EFER_LMA bit will be set automatically by
+hardware.
+
+In the case of SVM/SEV guests where writes to CR0 are intercepted, it's
+necessary for the host to set EFER_LMA on behalf of the guest since
+hardware does not see the actual CR0 write.
+
+In the case of SEV-ES guests where writes to CR0 are trapped instead of
+intercepted, the hardware *does* see/record the write to CR0 before
+exiting and passing the value on to the host, so as part of enabling
+SEV-ES support commit f1c6366e3043 ("KVM: SVM: Add required changes to
+support intercepts under SEV-ES") dropped special handling of the
+EFER_LMA bit with the understanding that it would be set automatically.
+
+However, since the guest never explicitly sets the EFER_LMA bit, the
+host never becomes aware that it has been set. This becomes problematic
+when userspace tries to get/set the EFER values via
+KVM_GET_SREGS/KVM_SET_SREGS, since the EFER contents tracked by the host
+will be missing the EFER_LMA bit, and when userspace attempts to pass
+the EFER value back via KVM_SET_SREGS it will fail a sanity check that
+asserts that EFER_LMA should always be set when X86_CR0_PG and EFER_LME
+are set.
+
+Fix this by always inferring the value of EFER_LMA based on X86_CR0_PG
+and EFER_LME, regardless of whether or not SEV-ES is enabled.
+
+Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
+Reported-by: Peter Gonda <pgonda@google.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Sean Christopherson <seanjc@google.com>
+Message-Id: <20210507165947.2502412-2-seanjc@google.com>
+[A two year old patch that was revived after we noticed the failure in
+ KVM_SET_SREGS and a similar patch was posted by Michael Roth. This is
+ Sean's patch, but with Michael's more complete commit message. - Paolo]
+Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/x86/kvm/svm/svm.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+--- a/arch/x86/kvm/svm/svm.c
++++ b/arch/x86/kvm/svm/svm.c
+@@ -1873,15 +1873,17 @@ void svm_set_cr0(struct kvm_vcpu *vcpu,
+ bool old_paging = is_paging(vcpu);
+
+ #ifdef CONFIG_X86_64
+- if (vcpu->arch.efer & EFER_LME && !vcpu->arch.guest_state_protected) {
++ if (vcpu->arch.efer & EFER_LME) {
+ if (!is_paging(vcpu) && (cr0 & X86_CR0_PG)) {
+ vcpu->arch.efer |= EFER_LMA;
+- svm->vmcb->save.efer |= EFER_LMA | EFER_LME;
++ if (!vcpu->arch.guest_state_protected)
++ svm->vmcb->save.efer |= EFER_LMA | EFER_LME;
+ }
+
+ if (is_paging(vcpu) && !(cr0 & X86_CR0_PG)) {
+ vcpu->arch.efer &= ~EFER_LMA;
+- svm->vmcb->save.efer &= ~(EFER_LMA | EFER_LME);
++ if (!vcpu->arch.guest_state_protected)
++ svm->vmcb->save.efer &= ~(EFER_LMA | EFER_LME);
+ }
+ }
+ #endif
--- /dev/null
+From a58a173444a68412bb08849bd81c679395f20ca0 Mon Sep 17 00:00:00 2001
+From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+Date: Thu, 30 Nov 2023 17:36:01 +0100
+Subject: MIPS: kernel: Clear FPU states when setting up kernel threads
+
+From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+commit a58a173444a68412bb08849bd81c679395f20ca0 upstream.
+
+io_uring sets up the io worker kernel thread via a syscall out of an
+user space prrocess. This process might have used FPU and since
+copy_thread() didn't clear FPU states for kernel threads a BUG()
+is triggered for using FPU inside kernel. Move code around
+to always clear FPU state for user and kernel threads.
+
+Cc: stable@vger.kernel.org
+Reported-by: Aurelien Jarno <aurel32@debian.org>
+Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021
+Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/mips/kernel/process.c | 25 +++++++++++++------------
+ 1 file changed, 13 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/kernel/process.c
++++ b/arch/mips/kernel/process.c
+@@ -121,6 +121,19 @@ int copy_thread(struct task_struct *p, c
+ /* Put the stack after the struct pt_regs. */
+ childksp = (unsigned long) childregs;
+ p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK;
++
++ /*
++ * New tasks lose permission to use the fpu. This accelerates context
++ * switching for most programs since they don't use the fpu.
++ */
++ clear_tsk_thread_flag(p, TIF_USEDFPU);
++ clear_tsk_thread_flag(p, TIF_USEDMSA);
++ clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
++
++#ifdef CONFIG_MIPS_MT_FPAFF
++ clear_tsk_thread_flag(p, TIF_FPUBOUND);
++#endif /* CONFIG_MIPS_MT_FPAFF */
++
+ if (unlikely(args->fn)) {
+ /* kernel thread */
+ unsigned long status = p->thread.cp0_status;
+@@ -149,20 +162,8 @@ int copy_thread(struct task_struct *p, c
+ p->thread.reg29 = (unsigned long) childregs;
+ p->thread.reg31 = (unsigned long) ret_from_fork;
+
+- /*
+- * New tasks lose permission to use the fpu. This accelerates context
+- * switching for most programs since they don't use the fpu.
+- */
+ childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
+
+- clear_tsk_thread_flag(p, TIF_USEDFPU);
+- clear_tsk_thread_flag(p, TIF_USEDMSA);
+- clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
+-
+-#ifdef CONFIG_MIPS_MT_FPAFF
+- clear_tsk_thread_flag(p, TIF_FPUBOUND);
+-#endif /* CONFIG_MIPS_MT_FPAFF */
+-
+ #ifdef CONFIG_MIPS_FP_SUPPORT
+ atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE);
+ #endif
--- /dev/null
+From edc0378eee00200a5bedf1bb9f00ad390e0d1bd4 Mon Sep 17 00:00:00 2001
+From: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Date: Tue, 7 Nov 2023 11:15:19 +0000
+Subject: MIPS: Loongson64: Enable DMA noncoherent support
+
+From: Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+commit edc0378eee00200a5bedf1bb9f00ad390e0d1bd4 upstream.
+
+There are some Loongson64 systems come with broken coherent DMA
+support, firmware will set a bit in boot_param and pass nocoherentio
+in cmdline.
+
+However nonconherent support was missed out when spin off Loongson-2EF
+form Loongson64, and that boot_param change never made itself into
+upstream.
+
+Support DMA noncoherent properly to get those systems working.
+
+Cc: stable@vger.kernel.org
+Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64")
+Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/mips/Kconfig | 2 ++
+ arch/mips/include/asm/mach-loongson64/boot_param.h | 3 ++-
+ arch/mips/loongson64/env.c | 10 +++++++++-
+ 3 files changed, 13 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -482,6 +482,7 @@ config MACH_LOONGSON2EF
+
+ config MACH_LOONGSON64
+ bool "Loongson 64-bit family of machines"
++ select ARCH_DMA_DEFAULT_COHERENT
+ select ARCH_SPARSEMEM_ENABLE
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_MIGHT_HAVE_PC_SERIO
+@@ -1273,6 +1274,7 @@ config CPU_LOONGSON64
+ select CPU_SUPPORTS_MSA
+ select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT
+ select CPU_MIPSR2_IRQ_VI
++ select DMA_NONCOHERENT
+ select WEAK_ORDERING
+ select WEAK_REORDERING_BEYOND_LLSC
+ select MIPS_ASID_BITS_VARIABLE
+--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
++++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
+@@ -121,7 +121,8 @@ struct irq_source_routing_table {
+ u64 pci_io_start_addr;
+ u64 pci_io_end_addr;
+ u64 pci_config_addr;
+- u32 dma_mask_bits;
++ u16 dma_mask_bits;
++ u16 dma_noncoherent;
+ } __packed;
+
+ struct interface_info {
+--- a/arch/mips/loongson64/env.c
++++ b/arch/mips/loongson64/env.c
+@@ -13,6 +13,8 @@
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
++
++#include <linux/dma-map-ops.h>
+ #include <linux/export.h>
+ #include <linux/pci_ids.h>
+ #include <asm/bootinfo.h>
+@@ -147,8 +149,14 @@ void __init prom_lefi_init_env(void)
+
+ loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
+ if (loongson_sysconf.dma_mask_bits < 32 ||
+- loongson_sysconf.dma_mask_bits > 64)
++ loongson_sysconf.dma_mask_bits > 64) {
+ loongson_sysconf.dma_mask_bits = 32;
++ dma_default_coherent = true;
++ } else {
++ dma_default_coherent = !eirq_source->dma_noncoherent;
++ }
++
++ pr_info("Firmware: Coherent DMA: %s\n", dma_default_coherent ? "on" : "off");
+
+ loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
+ loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
--- /dev/null
+From c7206e7bd214ebb3ca6fa474a4423662327d9beb Mon Sep 17 00:00:00 2001
+From: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Date: Tue, 7 Nov 2023 11:15:20 +0000
+Subject: MIPS: Loongson64: Handle more memory types passed from firmware
+
+From: Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+commit c7206e7bd214ebb3ca6fa474a4423662327d9beb upstream.
+
+There are many types of revsered memory passed from firmware
+that should be reserved in memblock, and UMA memory passed
+from firmware that should be added to system memory for system
+to use.
+
+Also for memblock there is no need to align those space into page,
+which actually cause problems.
+
+Handle them properly to prevent memory corruption on some systems.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/mips/include/asm/mach-loongson64/boot_param.h | 6 ++-
+ arch/mips/loongson64/init.c | 42 +++++++++++++--------
+ 2 files changed, 31 insertions(+), 17 deletions(-)
+
+--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
++++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
+@@ -14,7 +14,11 @@
+ #define ADAPTER_ROM 8
+ #define ACPI_TABLE 9
+ #define SMBIOS_TABLE 10
+-#define MAX_MEMORY_TYPE 11
++#define UMA_VIDEO_RAM 11
++#define VUMA_VIDEO_RAM 12
++#define MAX_MEMORY_TYPE 13
++
++#define MEM_SIZE_IS_IN_BYTES (1 << 31)
+
+ #define LOONGSON3_BOOT_MEM_MAP_MAX 128
+ struct efi_memory_map_loongson {
+--- a/arch/mips/loongson64/init.c
++++ b/arch/mips/loongson64/init.c
+@@ -49,8 +49,7 @@ void virtual_early_config(void)
+ void __init szmem(unsigned int node)
+ {
+ u32 i, mem_type;
+- static unsigned long num_physpages;
+- u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
++ phys_addr_t node_id, mem_start, mem_size;
+
+ /* Otherwise come from DTB */
+ if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
+@@ -64,27 +63,38 @@ void __init szmem(unsigned int node)
+
+ mem_type = loongson_memmap->map[i].mem_type;
+ mem_size = loongson_memmap->map[i].mem_size;
+- mem_start = loongson_memmap->map[i].mem_start;
++
++ /* Memory size comes in MB if MEM_SIZE_IS_IN_BYTES not set */
++ if (mem_size & MEM_SIZE_IS_IN_BYTES)
++ mem_size &= ~MEM_SIZE_IS_IN_BYTES;
++ else
++ mem_size = mem_size << 20;
++
++ mem_start = (node_id << 44) | loongson_memmap->map[i].mem_start;
+
+ switch (mem_type) {
+ case SYSTEM_RAM_LOW:
+ case SYSTEM_RAM_HIGH:
+- start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+- node_psize = (mem_size << 20) >> PAGE_SHIFT;
+- end_pfn = start_pfn + node_psize;
+- num_physpages += node_psize;
+- pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+- (u32)node_id, mem_type, mem_start, mem_size);
+- pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+- start_pfn, end_pfn, num_physpages);
+- memblock_add_node(PFN_PHYS(start_pfn),
+- PFN_PHYS(node_psize), node,
++ case UMA_VIDEO_RAM:
++ pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes usable\n",
++ (u32)node_id, mem_type, &mem_start, &mem_size);
++ memblock_add_node(mem_start, mem_size, node,
+ MEMBLOCK_NONE);
+ break;
+ case SYSTEM_RAM_RESERVED:
+- pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+- (u32)node_id, mem_type, mem_start, mem_size);
+- memblock_reserve(((node_id << 44) + mem_start), mem_size << 20);
++ case VIDEO_ROM:
++ case ADAPTER_ROM:
++ case ACPI_TABLE:
++ case SMBIOS_TABLE:
++ pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes reserved\n",
++ (u32)node_id, mem_type, &mem_start, &mem_size);
++ memblock_reserve(mem_start, mem_size);
++ break;
++ /* We should not reserve VUMA_VIDEO_RAM as it overlaps with MMIO */
++ case VUMA_VIDEO_RAM:
++ default:
++ pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes unhandled\n",
++ (u32)node_id, mem_type, &mem_start, &mem_size);
+ break;
+ }
+ }
--- /dev/null
+From 8f7aa77a463f47c9e00592d02747a9fcf2271543 Mon Sep 17 00:00:00 2001
+From: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Date: Tue, 7 Nov 2023 11:15:18 +0000
+Subject: MIPS: Loongson64: Reserve vgabios memory on boot
+
+From: Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+commit 8f7aa77a463f47c9e00592d02747a9fcf2271543 upstream.
+
+vgabios is passed from firmware to kernel on Loongson64 systems.
+Sane firmware will keep this pointer in reserved memory space
+passed from the firmware but insane firmware keeps it in low
+memory before kernel entry that is not reserved.
+
+Previously kernel won't try to allocate memory from low memory
+before kernel entry on boot, but after converting to memblock
+it will do that.
+
+Fix by resversing those memory on early boot.
+
+Cc: stable@vger.kernel.org
+Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
+Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
+Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/mips/loongson64/init.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/loongson64/init.c
++++ b/arch/mips/loongson64/init.c
+@@ -88,6 +88,11 @@ void __init szmem(unsigned int node)
+ break;
+ }
+ }
++
++ /* Reserve vgabios if it comes from firmware */
++ if (loongson_sysconf.vgabios_addr)
++ memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
++ SZ_256K);
+ }
+
+ #ifndef CONFIG_NUMA
--- /dev/null
+From b7c1e53751cb3990153084f31c41f25fde3b629c Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Fri, 24 Nov 2023 20:38:14 +0100
+Subject: nvmem: Do not expect fixed layouts to grab a layout driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit b7c1e53751cb3990153084f31c41f25fde3b629c upstream.
+
+Two series lived in parallel for some time, which led to this situation:
+- The nvmem-layout container is used for dynamic layouts
+- We now expect fixed layouts to also use the nvmem-layout container but
+this does not require any additional driver, the support is built-in the
+nvmem core.
+
+Ensure we don't refuse to probe for wrong reasons.
+
+Fixes: 27f699e578b1 ("nvmem: core: add support for fixed cells *layout*")
+Cc: stable@vger.kernel.org
+Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Tested-by: Rafał Miłecki <rafal@milecki.pl>
+Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
+Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
+Link: https://lore.kernel.org/r/20231124193814.360552-1-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/nvmem/core.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
+index bf42b7e826db..608b352a7d91 100644
+--- a/drivers/nvmem/core.c
++++ b/drivers/nvmem/core.c
+@@ -796,6 +796,12 @@ static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
+ if (!layout_np)
+ return NULL;
+
++ /* Fixed layouts don't have a matching driver */
++ if (of_device_is_compatible(layout_np, "fixed-layout")) {
++ of_node_put(layout_np);
++ return NULL;
++ }
++
+ /*
+ * In case the nvmem device was built-in while the layout was built as a
+ * module, we shall manually request the layout driver loading otherwise
+--
+2.43.0
+
--- /dev/null
+From 1a031f6edc460e9562098bdedc3918da07c30a6e Mon Sep 17 00:00:00 2001
+From: Cameron Williams <cang1@live.co.uk>
+Date: Thu, 2 Nov 2023 21:10:40 +0000
+Subject: parport: Add support for Brainboxes IX/UC/PX parallel cards
+
+From: Cameron Williams <cang1@live.co.uk>
+
+commit 1a031f6edc460e9562098bdedc3918da07c30a6e upstream.
+
+Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157,
+PX-203 and PX-475 (LPT port)
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Cameron Williams <cang1@live.co.uk>
+Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
+Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/parport/parport_pc.c | 21 +++++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/drivers/parport/parport_pc.c
++++ b/drivers/parport/parport_pc.c
+@@ -2658,6 +2658,8 @@ enum parport_pc_pci_cards {
+ asix_ax99100,
+ quatech_sppxp100,
+ wch_ch382l,
++ brainboxes_uc146,
++ brainboxes_px203,
+ };
+
+
+@@ -2737,6 +2739,8 @@ static struct parport_pc_pci {
+ /* asix_ax99100 */ { 1, { { 0, 1 }, } },
+ /* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
+ /* wch_ch382l */ { 1, { { 2, -1 }, } },
++ /* brainboxes_uc146 */ { 1, { { 3, -1 }, } },
++ /* brainboxes_px203 */ { 1, { { 0, -1 }, } },
+ };
+
+ static const struct pci_device_id parport_pc_pci_tbl[] = {
+@@ -2833,6 +2837,23 @@ static const struct pci_device_id parpor
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
+ /* WCH CH382L PCI-E single parallel port card */
+ { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l },
++ /* Brainboxes IX-500/550 */
++ { PCI_VENDOR_ID_INTASHIELD, 0x402a,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
++ /* Brainboxes UC-146/UC-157 */
++ { PCI_VENDOR_ID_INTASHIELD, 0x0be1,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc146 },
++ { PCI_VENDOR_ID_INTASHIELD, 0x0be2,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc146 },
++ /* Brainboxes PX-146/PX-257 */
++ { PCI_VENDOR_ID_INTASHIELD, 0x401c,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
++ /* Brainboxes PX-203 */
++ { PCI_VENDOR_ID_INTASHIELD, 0x4007,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_px203 },
++ /* Brainboxes PX-475 */
++ { PCI_VENDOR_ID_INTASHIELD, 0x401f,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+ { 0, } /* terminate list */
+ };
+ MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
--- /dev/null
+From b1693747487442984050eb0f462b83a3a8307525 Mon Sep 17 00:00:00 2001
+From: Ian Rogers <irogers@google.com>
+Date: Wed, 29 Nov 2023 13:34:26 -0800
+Subject: perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback
+
+From: Ian Rogers <irogers@google.com>
+
+commit b1693747487442984050eb0f462b83a3a8307525 upstream.
+
+Json output didn't set the skip_duplicate_pmus callback yielding a
+segfault.
+
+Fixes: cd4e1efbbc40 ("perf pmus: Skip duplicate PMUs and don't print list suffix by default")
+Signed-off-by: Ian Rogers <irogers@google.com>
+Cc: James Clark <james.clark@arm.com>
+Cc: Kan Liang <kan.liang@linux.intel.com>
+Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
+Cc: stable@vger.kernel.org
+Link: https://lore.kernel.org/r/20231129213428.2227448-2-irogers@google.com
+[namhyung: updated subject line according to Arnaldo]
+Signed-off-by: Namhyung Kim <namhyung@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ tools/perf/builtin-list.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c
+index a343823c8ddf..61c2c96cc070 100644
+--- a/tools/perf/builtin-list.c
++++ b/tools/perf/builtin-list.c
+@@ -434,6 +434,11 @@ static void json_print_metric(void *ps __maybe_unused, const char *group,
+ strbuf_release(&buf);
+ }
+
++static bool json_skip_duplicate_pmus(void *ps __maybe_unused)
++{
++ return false;
++}
++
+ static bool default_skip_duplicate_pmus(void *ps)
+ {
+ struct print_state *print_state = ps;
+@@ -503,6 +508,7 @@ int cmd_list(int argc, const char **argv)
+ .print_end = json_print_end,
+ .print_event = json_print_event,
+ .print_metric = json_print_metric,
++ .skip_duplicate_pmus = json_skip_duplicate_pmus,
+ };
+ ps = &json_ps;
+ } else {
+--
+2.43.0
+
--- /dev/null
+From e2b005d6ec0e738df584190e21d2c7ada37266a0 Mon Sep 17 00:00:00 2001
+From: Ian Rogers <irogers@google.com>
+Date: Mon, 4 Dec 2023 10:23:29 -0800
+Subject: perf metrics: Avoid segv if default metricgroup isn't set
+
+From: Ian Rogers <irogers@google.com>
+
+commit e2b005d6ec0e738df584190e21d2c7ada37266a0 upstream.
+
+A metric is default by having "Default" within its groups. The default
+metricgroup name needn't be set and this can result in segv in
+default_metricgroup_cmp and perf_stat__print_shadow_stats_metricgroup
+that assume it has a value when there is a Default metric group. To
+avoid the segv initialize the value to "".
+
+Fixes: 1c0e47956a8e ("perf metrics: Sort the Default metricgroup")
+Signed-off-by: Ian Rogers <irogers@google.com>
+Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
+Cc: James Clark <james.clark@arm.com>
+Cc: Will Deacon <will@kernel.org>
+Cc: Leo Yan <leo.yan@linaro.org>
+Cc: Mike Leach <mike.leach@linaro.org>
+Cc: Kajol Jain <kjain@linux.ibm.com>
+Cc: Kan Liang <kan.liang@linux.intel.com>
+Cc: John Garry <john.g.garry@oracle.com>
+Cc: stable@vger.kernel.org
+Cc: linux-arm-kernel@lists.infradead.org
+Link: https://lore.kernel.org/r/20231204182330.654255-1-irogers@google.com
+Signed-off-by: Namhyung Kim <namhyung@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ tools/perf/util/metricgroup.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
+index 0484736d9fe4..ca3e0404f187 100644
+--- a/tools/perf/util/metricgroup.c
++++ b/tools/perf/util/metricgroup.c
+@@ -225,7 +225,7 @@ static struct metric *metric__new(const struct pmu_metric *pm,
+
+ m->pmu = pm->pmu ?: "cpu";
+ m->metric_name = pm->metric_name;
+- m->default_metricgroup_name = pm->default_metricgroup_name;
++ m->default_metricgroup_name = pm->default_metricgroup_name ?: "";
+ m->modifier = NULL;
+ if (modifier) {
+ m->modifier = strdup(modifier);
+--
+2.43.0
+
--- /dev/null
+From 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 Mon Sep 17 00:00:00 2001
+From: Naveen N Rao <naveen@kernel.org>
+Date: Thu, 30 Nov 2023 12:29:47 +0530
+Subject: powerpc/ftrace: Fix stack teardown in ftrace_no_trace
+
+From: Naveen N Rao <naveen@kernel.org>
+
+commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 upstream.
+
+Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix
+stack unwind") added use of a new stack frame on ftrace entry to fix
+stack unwind. However, the commit missed updating the offset used while
+tearing down the ftrace stack when ftrace is disabled. Fix the same.
+
+In addition, the commit missed saving the correct stack pointer in
+pt_regs. Update the same.
+
+Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind")
+Cc: stable@vger.kernel.org # v6.5+
+Signed-off-by: Naveen N Rao <naveen@kernel.org>
+Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
+Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/powerpc/kernel/trace/ftrace_entry.S | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/powerpc/kernel/trace/ftrace_entry.S
++++ b/arch/powerpc/kernel/trace/ftrace_entry.S
+@@ -62,7 +62,7 @@
+ .endif
+
+ /* Save previous stack pointer (r1) */
+- addi r8, r1, SWITCH_FRAME_SIZE
++ addi r8, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
+ PPC_STL r8, GPR1(r1)
+
+ .if \allregs == 1
+@@ -182,7 +182,7 @@ ftrace_no_trace:
+ mflr r3
+ mtctr r3
+ REST_GPR(3, r1)
+- addi r1, r1, SWITCH_FRAME_SIZE
++ addi r1, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
+ mtlr r0
+ bctr
+ #endif
--- /dev/null
+From 24be0b3c40594a14b65141ced486ae327398faf8 Mon Sep 17 00:00:00 2001
+From: Mathias Nyman <mathias.nyman@linux.intel.com>
+Date: Tue, 5 Dec 2023 11:05:48 +0200
+Subject: Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
+
+From: Mathias Nyman <mathias.nyman@linux.intel.com>
+
+commit 24be0b3c40594a14b65141ced486ae327398faf8 upstream.
+
+This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac.
+
+Enabling runtime pm as default for all AMD xHC 1.1 controllers caused
+regression. An initial attempt to fix those was done in commit a5d6264b638e
+("xhci: Enable RPM on controllers that support low-power states") but new
+issues are still seen.
+
+Revert this to get those AMD xHC 1.1 systems working
+
+This patch went to stable an needs to be reverted from there as well.
+
+Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1")
+Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de
+Cc: Mario Limonciello <mario.limonciello@amd.com>
+Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
+Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
+Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/host/xhci-pci.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -535,8 +535,6 @@ static void xhci_pci_quirks(struct devic
+ /* xHC spec requires PCI devices to support D3hot and D3cold */
+ if (xhci->hci_version >= 0x120)
+ xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+- else if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version >= 0x110)
+- xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+ if (xhci->quirks & XHCI_RESET_ON_RESUME)
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
--- /dev/null
+From 8973ab7a2441b286218f4a5c4c33680e2f139996 Mon Sep 17 00:00:00 2001
+From: Ronald Wahl <ronald.wahl@raritan.com>
+Date: Tue, 31 Oct 2023 12:09:09 +0100
+Subject: serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
+
+From: Ronald Wahl <ronald.wahl@raritan.com>
+
+commit 8973ab7a2441b286218f4a5c4c33680e2f139996 upstream.
+
+This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX
+interrupt after DMA enable") which unfortunately set the
+UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never
+cleared it.
+
+Cc: stable@vger.kernel.org
+Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable")
+Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
+Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
+Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/8250/8250_omap.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/tty/serial/8250/8250_omap.c
++++ b/drivers/tty/serial/8250/8250_omap.c
+@@ -914,7 +914,7 @@ static void __dma_rx_do_complete(struct
+ if (priv->habit & UART_HAS_RHR_IT_DIS) {
+ reg = serial_in(p, UART_OMAP_IER2);
+ reg &= ~UART_OMAP_IER2_RHR_IT_DIS;
+- serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
++ serial_out(p, UART_OMAP_IER2, reg);
+ }
+
+ dmaengine_tx_status(rxchan, cookie, &state);
+@@ -1060,7 +1060,7 @@ static int omap_8250_rx_dma(struct uart_
+ if (priv->habit & UART_HAS_RHR_IT_DIS) {
+ reg = serial_in(p, UART_OMAP_IER2);
+ reg |= UART_OMAP_IER2_RHR_IT_DIS;
+- serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
++ serial_out(p, UART_OMAP_IER2, reg);
+ }
+
+ dma_async_issue_pending(dma->rxchan);
--- /dev/null
+From c6bb057418876cdfdd29a6f7b8cef54539ee8811 Mon Sep 17 00:00:00 2001
+From: Ronald Wahl <ronald.wahl@raritan.com>
+Date: Wed, 1 Nov 2023 18:14:31 +0100
+Subject: serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
+
+From: Ronald Wahl <ronald.wahl@raritan.com>
+
+commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream.
+
+Starting RX DMA on THRI interrupt is too early because TX may not have
+finished yet.
+
+This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent
+starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with
+an AM62 SoC that is using the 8250 OMAP variant.
+
+Cc: stable@vger.kernel.org
+Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs")
+Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
+Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
+Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/8250/8250_omap.c | 10 ++++++----
+ 1 file changed, 6 insertions(+), 4 deletions(-)
+
+--- a/drivers/tty/serial/8250/8250_omap.c
++++ b/drivers/tty/serial/8250/8250_omap.c
+@@ -1282,10 +1282,12 @@ static int omap_8250_dma_handle_irq(stru
+
+ status = serial_port_in(port, UART_LSR);
+
+- if (priv->habit & UART_HAS_EFR2)
+- am654_8250_handle_rx_dma(up, iir, status);
+- else
+- status = omap_8250_handle_rx_dma(up, iir, status);
++ if ((iir & 0x3f) != UART_IIR_THRI) {
++ if (priv->habit & UART_HAS_EFR2)
++ am654_8250_handle_rx_dma(up, iir, status);
++ else
++ status = omap_8250_handle_rx_dma(up, iir, status);
++ }
+
+ serial8250_modem_status(up);
+ if (status & UART_LSR_THRE && up->dma->tx_err) {
--- /dev/null
+From e92fad024929c79460403acf946bc9c09ce5c3a9 Mon Sep 17 00:00:00 2001
+From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Date: Tue, 5 Dec 2023 21:55:24 +0200
+Subject: serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
+
+From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+commit e92fad024929c79460403acf946bc9c09ce5c3a9 upstream.
+
+Granite Rapids-D has an additional UART that is enumerated via ACPI.
+Add ACPI ID for it.
+
+Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Cc: stable <stable@kernel.org>
+Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/8250/8250_dw.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/tty/serial/8250/8250_dw.c
++++ b/drivers/tty/serial/8250/8250_dw.c
+@@ -798,6 +798,7 @@ static const struct acpi_device_id dw825
+ { "INT33C5", (kernel_ulong_t)&dw8250_dw_apb },
+ { "INT3434", (kernel_ulong_t)&dw8250_dw_apb },
+ { "INT3435", (kernel_ulong_t)&dw8250_dw_apb },
++ { "INTC10EE", (kernel_ulong_t)&dw8250_dw_apb },
+ { },
+ };
+ MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
--- /dev/null
+From 8e42c301ce64e0dcca547626eb486877d502d336 Mon Sep 17 00:00:00 2001
+From: Ronald Wahl <ronald.wahl@raritan.com>
+Date: Tue, 31 Oct 2023 14:12:42 +0100
+Subject: serial: 8250_omap: Add earlycon support for the AM654 UART controller
+
+From: Ronald Wahl <ronald.wahl@raritan.com>
+
+commit 8e42c301ce64e0dcca547626eb486877d502d336 upstream.
+
+Currently there is no support for earlycon on the AM654 UART
+controller. This commit adds it.
+
+Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
+Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
+Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de
+Cc: stable <stable@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/8250/8250_early.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/tty/serial/8250/8250_early.c
++++ b/drivers/tty/serial/8250/8250_early.c
+@@ -189,5 +189,6 @@ static int __init early_omap8250_setup(s
+ OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
+ OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
+ OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
++OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup);
+
+ #endif
--- /dev/null
+From f0b9d97a77fa8f18400450713358303a435ab688 Mon Sep 17 00:00:00 2001
+From: Andi Shyti <andi.shyti@kernel.org>
+Date: Mon, 4 Dec 2023 17:38:03 +0100
+Subject: serial: ma35d1: Validate console index before assignment
+
+From: Andi Shyti <andi.shyti@kernel.org>
+
+commit f0b9d97a77fa8f18400450713358303a435ab688 upstream.
+
+The console is immediately assigned to the ma35d1 port without
+checking its index. This oversight can lead to out-of-bounds
+errors when the index falls outside the valid '0' to
+MA35_UART_NR range. Such scenario trigges ran error like the
+following:
+
+ UBSAN: array-index-out-of-bounds in drivers/tty/serial/ma35d1_serial.c:555:51
+ index -1 is out of range for type 'uart_ma35d1_port [17]
+
+Check the index before using it and bail out with a warning.
+
+Fixes: 930cbf92db01 ("tty: serial: Add Nuvoton ma35d1 serial driver support")
+Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
+Cc: Jacky Huang <ychuang3@nuvoton.com>
+Cc: <stable@vger.kernel.org> # v6.5+
+Link: https://lore.kernel.org/r/20231204163804.1331415-2-andi.shyti@kernel.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/ma35d1_serial.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+--- a/drivers/tty/serial/ma35d1_serial.c
++++ b/drivers/tty/serial/ma35d1_serial.c
+@@ -552,11 +552,19 @@ static void ma35d1serial_console_putchar
+ */
+ static void ma35d1serial_console_write(struct console *co, const char *s, u32 count)
+ {
+- struct uart_ma35d1_port *up = &ma35d1serial_ports[co->index];
++ struct uart_ma35d1_port *up;
+ unsigned long flags;
+ int locked = 1;
+ u32 ier;
+
++ if ((co->index < 0) || (co->index >= MA35_UART_NR)) {
++ pr_warn("Failed to write on ononsole port %x, out of range\n",
++ co->index);
++ return;
++ }
++
++ up = &ma35d1serial_ports[co->index];
++
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
--- /dev/null
+From 08ce9a1b72e38cf44c300a44ac5858533eb3c860 Mon Sep 17 00:00:00 2001
+From: Daniel Mack <daniel@zonque.org>
+Date: Thu, 23 Nov 2023 08:28:18 +0100
+Subject: serial: sc16is7xx: address RX timeout interrupt errata
+
+From: Daniel Mack <daniel@zonque.org>
+
+commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream.
+
+This device has a silicon bug that makes it report a timeout interrupt
+but no data in the FIFO.
+
+The datasheet states the following in the errata section 18.1.4:
+
+ "If the host reads the receive FIFO at the same time as a
+ time-out interrupt condition happens, the host might read 0xCC
+ (time-out) in the Interrupt Indication Register (IIR), but bit 0
+ of the Line Status Register (LSR) is not set (means there is no
+ data in the receive FIFO)."
+
+The errata description seems to indicate it concerns only polled mode of
+operation when reading bit 0 of the LSR register. However, tests have
+shown and NXP has confirmed that the RXLVL register also yields 0 when
+the bug is triggered, and hence the IRQ driven implementation in this
+driver is equally affected.
+
+This bug has hit us on production units and when it does, sc16is7xx_irq()
+would spin forever because sc16is7xx_port_irq() keeps seeing an
+interrupt in the IIR register that is not cleared because the driver
+does not call into sc16is7xx_handle_rx() unless the RXLVL register
+reports at least one byte in the FIFO.
+
+Fix this by always reading one byte from the FIFO when this condition
+is detected in order to clear the interrupt. This approach was
+confirmed to be correct by NXP through their support channels.
+
+Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
+
+Signed-off-by: Daniel Mack <daniel@zonque.org>
+Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com>
+Cc: stable@vger.kernel.org
+Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/sc16is7xx.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/drivers/tty/serial/sc16is7xx.c
++++ b/drivers/tty/serial/sc16is7xx.c
+@@ -767,6 +767,18 @@ static bool sc16is7xx_port_irq(struct sc
+ case SC16IS7XX_IIR_RTOI_SRC:
+ case SC16IS7XX_IIR_XOFFI_SRC:
+ rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
++
++ /*
++ * There is a silicon bug that makes the chip report a
++ * time-out interrupt but no data in the FIFO. This is
++ * described in errata section 18.1.4.
++ *
++ * When this happens, read one byte from the FIFO to
++ * clear the interrupt.
++ */
++ if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
++ rxlen = 1;
++
+ if (rxlen)
+ sc16is7xx_handle_rx(port, rxlen, iir);
+ break;
x86-sev-fix-kernel-crash-due-to-late-update-to-read-.patch
gpiolib-sysfs-fix-error-handling-on-failed-export.patch
asoc-ops-add-correct-range-check-for-limiting-volume.patch
-asoc-qcom-sc8280xp-limit-speaker-digital-volumes.patch
+kprobes-consistent-rcu-api-usage-for-kretprobe-holder.patch
+usb-gadget-f_hid-fix-report-descriptor-allocation.patch
+nvmem-do-not-expect-fixed-layouts-to-grab-a-layout-driver.patch
+serial-8250_dw-add-acpi-id-for-granite-rapids-d-uart.patch
+serial-ma35d1-validate-console-index-before-assignment.patch
+parport-add-support-for-brainboxes-ix-uc-px-parallel-cards.patch
+cifs-fix-non-availability-of-dedup-breaking-generic-304.patch
+revert-xhci-loosen-rpm-as-default-policy-to-cover-for-amd-xhc-1.1.patch
+smb-client-fix-potential-null-deref-in-parse_dfs_referrals.patch
+usb-typec-class-fix-typec_altmode_put_partner-to-put-plugs.patch
+arm-pl011-fix-dma-support.patch
+serial-sc16is7xx-address-rx-timeout-interrupt-errata.patch
+serial-8250-8250_omap-clear-uart_has_rhr_it_dis-bit.patch
+serial-8250-8250_omap-do-not-start-rx-dma-on-thri-interrupt.patch
+serial-8250_omap-add-earlycon-support-for-the-am654-uart-controller.patch
+devcoredump-send-uevent-once-devcd-is-ready.patch
+x86-cpu-amd-check-vendor-in-the-amd-microcode-callback.patch
+powerpc-ftrace-fix-stack-teardown-in-ftrace_no_trace.patch
+usb-gadget-core-adjust-uevent-timing-on-gadget-unbind.patch
+cifs-fix-flushing-invalidation-and-file-size-with-copy_file_range.patch
+cifs-fix-flushing-invalidation-and-file-size-with-ficlone.patch
+mips-kernel-clear-fpu-states-when-setting-up-kernel-threads.patch
+kvm-s390-mm-properly-reset-no-dat.patch
+kvm-svm-update-efer-software-model-on-cr0-trap-for-sev-es.patch
+perf-list-fix-json-segfault-by-setting-the-used-skip_duplicate_pmus-callback.patch
+perf-metrics-avoid-segv-if-default-metricgroup-isn-t-set.patch
+mips-loongson64-reserve-vgabios-memory-on-boot.patch
+mips-loongson64-handle-more-memory-types-passed-from-firmware.patch
+mips-loongson64-enable-dma-noncoherent-support.patch
--- /dev/null
+From 92414333eb375ed64f4ae92d34d579e826936480 Mon Sep 17 00:00:00 2001
+From: Paulo Alcantara <pc@manguebit.com>
+Date: Tue, 5 Dec 2023 21:49:29 -0300
+Subject: smb: client: fix potential NULL deref in parse_dfs_referrals()
+
+From: Paulo Alcantara <pc@manguebit.com>
+
+commit 92414333eb375ed64f4ae92d34d579e826936480 upstream.
+
+If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will
+remain NULL and then parse_dfs_referrals() will dereference it.
+
+Fix this by returning -EIO when no output data is returned.
+
+Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to
+return no data as per MS-SMB2 2.2.32.
+
+Fixes: 9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+")
+Cc: stable@vger.kernel.org
+Reported-by: Robert Morris <rtm@csail.mit.edu>
+Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ fs/smb/client/smb2ops.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/fs/smb/client/smb2ops.c
++++ b/fs/smb/client/smb2ops.c
+@@ -2834,6 +2834,8 @@ smb2_get_dfs_refer(const unsigned int xi
+ usleep_range(512, 2048);
+ } while (++retry_count < 5);
+
++ if (!rc && !dfs_rsp)
++ rc = -EIO;
+ if (rc) {
+ if (!is_retryable_error(rc) && rc != -ENOENT && rc != -EOPNOTSUPP)
+ cifs_tcon_dbg(VFS, "%s: ioctl error: rc=%d\n", __func__, rc);
--- /dev/null
+From 73ea73affe8622bdf292de898da869d441da6a9d Mon Sep 17 00:00:00 2001
+From: Roy Luo <royluo@google.com>
+Date: Tue, 28 Nov 2023 22:17:56 +0000
+Subject: USB: gadget: core: adjust uevent timing on gadget unbind
+
+From: Roy Luo <royluo@google.com>
+
+commit 73ea73affe8622bdf292de898da869d441da6a9d upstream.
+
+The KOBJ_CHANGE uevent is sent before gadget unbind is actually
+executed, resulting in inaccurate uevent emitted at incorrect timing
+(the uevent would have USB_UDC_DRIVER variable set while it would
+soon be removed).
+Move the KOBJ_CHANGE uevent to the end of the unbind function so that
+uevent is sent only after the change has been made.
+
+Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
+Cc: stable@vger.kernel.org
+Signed-off-by: Roy Luo <royluo@google.com>
+Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/udc/core.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/gadget/udc/core.c
++++ b/drivers/usb/gadget/udc/core.c
+@@ -1635,8 +1635,6 @@ static void gadget_unbind_driver(struct
+
+ dev_dbg(&udc->dev, "unbinding gadget driver [%s]\n", driver->function);
+
+- kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+-
+ udc->allow_connect = false;
+ cancel_work_sync(&udc->vbus_work);
+ mutex_lock(&udc->connect_lock);
+@@ -1656,6 +1654,8 @@ static void gadget_unbind_driver(struct
+ driver->is_bound = false;
+ udc->driver = NULL;
+ mutex_unlock(&udc_lock);
++
++ kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+ }
+
+ /* ------------------------------------------------------------------------- */
--- /dev/null
+From 61890dc28f7d9e9aac8a9471302613824c22fae4 Mon Sep 17 00:00:00 2001
+From: Konstantin Aladyshev <aladyshev22@gmail.com>
+Date: Wed, 6 Dec 2023 11:07:44 +0300
+Subject: usb: gadget: f_hid: fix report descriptor allocation
+
+From: Konstantin Aladyshev <aladyshev22@gmail.com>
+
+commit 61890dc28f7d9e9aac8a9471302613824c22fae4 upstream.
+
+The commit 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs
+cdev") has introduced a bug that leads to hid device corruption after
+the replug operation.
+Reverse device managed memory allocation for the report descriptor
+to fix the issue.
+
+Tested:
+This change was tested on the AMD EthanolX CRB server with the BMC
+based on the OpenBMC distribution. The BMC provides KVM functionality
+via the USB gadget device:
+- before: KVM page refresh results in a broken USB device,
+- after: KVM page refresh works without any issues.
+
+Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
+Cc: stable@vger.kernel.org
+Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
+Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/function/f_hid.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/gadget/function/f_hid.c
++++ b/drivers/usb/gadget/function/f_hid.c
+@@ -92,6 +92,7 @@ static void hidg_release(struct device *
+ {
+ struct f_hidg *hidg = container_of(dev, struct f_hidg, dev);
+
++ kfree(hidg->report_desc);
+ kfree(hidg->set_report_buf);
+ kfree(hidg);
+ }
+@@ -1287,9 +1288,9 @@ static struct usb_function *hidg_alloc(s
+ hidg->report_length = opts->report_length;
+ hidg->report_desc_length = opts->report_desc_length;
+ if (opts->report_desc) {
+- hidg->report_desc = devm_kmemdup(&hidg->dev, opts->report_desc,
+- opts->report_desc_length,
+- GFP_KERNEL);
++ hidg->report_desc = kmemdup(opts->report_desc,
++ opts->report_desc_length,
++ GFP_KERNEL);
+ if (!hidg->report_desc) {
+ ret = -ENOMEM;
+ goto err_put_device;
--- /dev/null
+From b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e Mon Sep 17 00:00:00 2001
+From: RD Babiera <rdbabiera@google.com>
+Date: Wed, 29 Nov 2023 19:23:50 +0000
+Subject: usb: typec: class: fix typec_altmode_put_partner to put plugs
+
+From: RD Babiera <rdbabiera@google.com>
+
+commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e upstream.
+
+When typec_altmode_put_partner is called by a plug altmode upon release,
+the port altmode the plug belongs to will not remove its reference to the
+plug. The check to see if the altmode being released evaluates against the
+released altmode's partner instead of the calling altmode itself, so change
+adev in typec_altmode_put_partner to properly refer to the altmode being
+released.
+
+typec_altmode_set_partner is not run for port altmodes, so also add a check
+in typec_altmode_release to prevent typec_altmode_put_partner() calls on
+port altmode release.
+
+Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
+Cc: stable@vger.kernel.org
+Signed-off-by: RD Babiera <rdbabiera@google.com>
+Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/typec/class.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/typec/class.c
++++ b/drivers/usb/typec/class.c
+@@ -266,7 +266,7 @@ static void typec_altmode_put_partner(st
+ if (!partner)
+ return;
+
+- adev = &partner->adev;
++ adev = &altmode->adev;
+
+ if (is_typec_plug(adev->dev.parent)) {
+ struct typec_plug *plug = to_typec_plug(adev->dev.parent);
+@@ -496,7 +496,8 @@ static void typec_altmode_release(struct
+ {
+ struct altmode *alt = to_altmode(to_typec_altmode(dev));
+
+- typec_altmode_put_partner(alt);
++ if (!is_typec_port(dev->parent))
++ typec_altmode_put_partner(alt);
+
+ altmode_id_remove(alt->adev.dev.parent, alt->id);
+ kfree(alt);
--- /dev/null
+From 9b8493dc43044376716d789d07699f17d538a7c4 Mon Sep 17 00:00:00 2001
+From: "Borislav Petkov (AMD)" <bp@alien8.de>
+Date: Fri, 1 Dec 2023 19:37:27 +0100
+Subject: x86/CPU/AMD: Check vendor in the AMD microcode callback
+
+From: Borislav Petkov (AMD) <bp@alien8.de>
+
+commit 9b8493dc43044376716d789d07699f17d538a7c4 upstream.
+
+Commit in Fixes added an AMD-specific microcode callback. However, it
+didn't check the CPU vendor the kernel runs on explicitly.
+
+The only reason the Zenbleed check in it didn't run on other x86 vendors
+hardware was pure coincidental luck:
+
+ if (!cpu_has_amd_erratum(c, amd_zenbleed))
+ return;
+
+gives true on other vendors because they don't have those families and
+models.
+
+However, with the removal of the cpu_has_amd_erratum() in
+
+ 05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function")
+
+that coincidental condition is gone, leading to the zenbleed check
+getting executed on other vendors too.
+
+Add the explicit vendor check for the whole callback as it should've
+been done in the first place.
+
+Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
+Cc: <stable@kernel.org>
+Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
+Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/x86/kernel/cpu/amd.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/x86/kernel/cpu/amd.c
++++ b/arch/x86/kernel/cpu/amd.c
+@@ -1315,6 +1315,9 @@ static void zenbleed_check_cpu(void *unu
+
+ void amd_check_microcode(void)
+ {
++ if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
++ return;
++
+ on_each_cpu(zenbleed_check_cpu, NULL, 1);
+ }
+
projects / thirdparty / kernel / stable-queue.git / commitdiff
