zynq_common: Few code cleanups on board configs

- Add tabs
- Rearrange the config macros
- Removed few unneeded configs
- Added missing && on nor autoboot

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

diff --git a/include/configs/zynq_common.h b/include/configs/zynq_common.h
index 89df2775094207767386486d27d1cd9b050bd026..1e473c615273856fdea45e460252af2621b3bc60 100644 (file)
--- a/include/configs/zynq_common.h
+++ b/include/configs/zynq_common.h
@@ -17,9 +17,7 @@
 #ifndef __CONFIG_ZYNQ_COMMON_H
 #define __CONFIG_ZYNQ_COMMON_H
 
-/*
- * High Level Configuration Options
- */
+/* High Level Configuration Options */
 #define CONFIG_ARMV7 /* CPU */
 #define CONFIG_ZYNQ /* SoC */
 
@@ -31,11 +29,14 @@
 #define CONFIG_SYS_SDRAM_SIZE  PHYS_SDRAM_1_SIZE
 
 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE                (128 << 10)
+#define CONFIG_ENV_SIZE                        (128 << 10)
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN          0x400000
+
 /* Serial drivers */
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 38400, 115200 }
@@ -77,17 +78,28 @@
 #endif
 
 /* SCU timer address is hardcoded */
-#define CONFIG_SCUTIMER_BASEADDR       0xF8F00600
+#define CONFIG_SCUTIMER_BASEADDR       0xF8F00600
 #ifndef CONFIG_CPU_FREQ_HZ
-#define CONFIG_CPU_FREQ_HZ     800000000
+#define CONFIG_CPU_FREQ_HZ             800000000
 #endif
-#define CONFIG_SYS_HZ          1000
+#define CONFIG_SYS_HZ                  1000
 
-#define CONFIG_AUTO_COMPLETE
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_PROMPT              "zynq-uboot> "
 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+
 #define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_LONGHELP
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_MAXARGS             16
+#define CONFIG_SYS_CBSIZE              2048
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Open Firmware flat tree */
+#define CONFIG_OF_LIBFDT
 
 #include <config_cmd_default.h>
 
@@ -113,7 +125,8 @@
 # undef CONFIG_SYS_FLASH_EMPTY_INFO
 # define CONFIG_FLASH_CFI_DRIVER
 # undef CONFIG_SYS_FLASH_PROTECTION /* don't use hardware protection */
-# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
+/* use buffered writes (20x faster) */
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #endif
 
 /* QSPI */
@@ -193,13 +206,6 @@
 # define CONFIG_PANIC_HANG
 #endif
 
-#define CONFIG_SYS_TEXT_BASE 0x04000000
-
-/*
- * Open Firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-
 /* Default environment */
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "ethaddr=00:0a:35:00:01:22\0"   \
@@ -211,7 +217,7 @@
        "ramdisk_size=0x5E0000\0"       \
        "fdt_high=0x20000000\0" \
        "initrd_high=0x20000000\0"      \
-       "norboot=echo Copying Linux from NOR flash to RAM...;" \
+       "norboot=echo Copying Linux from NOR flash to RAM... && " \
                "cp 0xE2100000 0x3000000 ${kernel_size} && " \
                "cp 0xE2600000 0x2A00000 ${devicetree_size} && " \
                "echo Copying ramdisk... && " \
@@ -243,41 +249,29 @@
                "bootm 0x3000000 0x2000000 0x2A00000\0"
 
 /* default boot is according to the bootmode switch settings */
-#define CONFIG_BOOTCOMMAND     "run $modeboot"
-#define CONFIG_BOOTDELAY       3 /* -1 to Disable autoboot */
-
-#define CONFIG_SYS_PROMPT      "zynq-uboot> "
-
-/* CONFIG_SYS_MONITOR_BASE? */
-/* CONFIG_SYS_MONITOR_LEN? */
+#define CONFIG_BOOTCOMMAND             "run $modeboot"
+#define CONFIG_BOOTDELAY               3 /* -1 to Disable autoboot */
+#define CONFIG_SYS_LOAD_ADDR           0 /* default? */
 
 /* Keep L2 Cache Disabled */
 #define CONFIG_SYS_L2CACHE_OFF
 #define CONFIG_SYS_CACHELINE_SIZE      32
 
 /* Physical Memory map */
-#define CONFIG_NR_DRAM_BANKS           1
-#define PHYS_SDRAM_1                   0
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1                   0
+#define CONFIG_SYS_TEXT_BASE           0x04000000
 
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
-                                   PHYS_SDRAM_1_SIZE - (16 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
+                                       PHYS_SDRAM_1_SIZE - (16 * 1024 * 1024))
 
-#define CONFIG_SYS_SDRAM_BASE          0
 #define CONFIG_SYS_INIT_RAM_ADDR       0xFFFF0000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x1000
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
                                        CONFIG_SYS_INIT_RAM_SIZE - \
                                        GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_MALLOC_LEN 0x400000
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_CBSIZE 2048
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-
-#define CONFIG_SYS_LOAD_ADDR   0 /* default? */
-
 /* Enable the PL to be downloaded */
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
@@ -288,8 +282,6 @@
 #define CONFIG_FIT             1
 #define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
 
-#define CONFIG_BOARD_LATE_INIT
-
 #undef CONFIG_BOOTM_NETBSD
 
 /* FIXME this should be removed pretty soon */