+++ /dev/null
-/******************************************************************************
-$Id$
-$Log$
-Revision 1.16 2003/02/12 13:59:14 matteo
-mer feb 12 14:56:57 CET 2003
-
-Revision 1.1.1.1 2003/02/12 13:59:14 matteo
-mer feb 12 14:56:57 CET 2003
-
-Revision 1.1 1999/12/01 05:25:58 markster
-Start on the Internet Phone Jack channel
-
-Revision 3.0 1999/11/18 22:21:43 root
-Added isapnp kernel module support.
-
-Revision 2.5 1999/11/09 15:42:06 root
-Fixed convert code for older PhoneJACK cards.
-Fixed G723.1 5.3 record bug.
-
-Revision 2.4 1999/11/02 20:17:20 root
-Fixed hookswitch bug for PhoneJACK
-Added filter exception bit code.
-
-Revision 2.3 1999/11/01 23:22:02 root
-Added tone cadence generation.
-Fixed hookswitch detection when PORT != POTS
-Fixed ringing when PORT != POTS
-
-Revision 2.2 1999/10/13 05:33:31 root
-Added G.729A/B codec.
-Fixed G.728 codec.
-
-Revision 2.1 1999/10/11 19:29:46 root
-Enhanced PSTN ring detection
-Added Caller ID recognition
-Added wink detection
-
-Revision 2.0 1999/09/18 03:29:15 root
-Added PSTN Support
-Enhanced mixer functions
-Fixed LineJACK and PhoneJACK Lite not reporting second IO range in p/proc/ioports
-Added DSP Volume controls
-
-Revision 1.23 1999/08/16 16:37:27 root
-Added drybuffer ioctls
-Added card type ioctl
-
-Revision 1.22 1999/08/14 05:15:58 root
-Fixed select timeout problems. Was using the wrong wait queues.
-
-Revision 1.21 1999/08/04 22:53:43 root
-Added levels to AEC
-
-Revision 1.20 1999/07/28 20:32:23 root
-Added non-blocking rings
-Added ring cadence
-
-Revision 1.19 1999/07/14 21:08:10 root
-fixed rcsid
-
-Revision 1.18 1999/07/14 21:03:33 root
-added rcsid
-
-Revision 1.17 1999/07/12 20:20:00 root
-Continuing work on 20ms and 10ms linear modes.
-
-Revision 1.16 1999/07/09 19:13:50 root
-Added IXJCTL_RATE to set the rate the DSP is polled.
-Added 20ms and 10ms linear modes for LineJack and PhoneJack Lite.
-
-Revision 1.15 1999/07/08 02:21:20 root
-Async Notification on hookswitch changes.
-Added IXJ_EXCEPTION bitfield structure for select exception sets
-Added IXJCTL_DTMFASCII ioctl
-
-Revision 1.14 1999/07/06 23:20:52 root
-*** empty log message ***
-
-Revision 1.14 1999/07/06 21:48:38 root
-Fixed lockups in linear modes during write.
-
-Revision 1.13 1999/06/28 18:30:44 root
-Added buffer depth commands to reduce latency in compressed modes.
-
-Revision 1.12 1999/06/25 21:03:18 root
-Close device properly.
-Started Mixer code for LineJack
-
-Revision 1.11 1999/06/24 21:51:21 root
-bug fixes
-
-Revision 1.10 1999/06/17 18:23:16 root
-Added tone generation.
-Fixed LineJack hookswitch again.
-
-Revision 1.9 1999/06/09 14:18:15 root
-Fixed duplicate IOCTL numbers
-
-Revision 1.8 1999/06/09 14:13:29 root
-Added DTMF Recognition with Async Notification
-
-Revision 1.7 1999/06/03 16:50:43 root
-Added IXJCTL_HZ to allow changing the HZ value the driver uses.
-
-Revision 1.6 1999/05/31 17:56:07 root
-All linear modes now work properly.
-
-Revision 1.5 1999/05/25 14:05:44 root
-Added multiple codec selections.
-
-Revision 1.4 1999/04/28 03:43:52 root
-More work on echo cancellation
-
-Revision 1.3 1999/04/27 17:17:12 root
-added AEC
-
-Revision 1.2 1999/04/22 11:43:52 root
-Fixed stability problems
-
-Revision 1.1 1999/03/25 21:52:42 root
-Initial revision
-
-*
-* IOCTL's used for the Quicknet Cards
-*
-* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before futher use.
-*
-******************************************************************************/
-static char ixjuser_h_rcsid[] = "$Id$";
-
-#define IXJCTL_DSP_RESET _IO ('q', 0x80)
-#define IXJCTL_RING _IO ('q', 0x82)
-#define IXJCTL_HOOKSTATE _IO ('q', 0x83)
-#define IXJCTL_MAXRINGS _IOW ('q', 0x84, char)
-#define IXJCTL_RING_CADENCE _IOW ('q', 0x85, short)
-#define IXJCTL_RING_START _IO ('q', 0x86)
-#define IXJCTL_RING_STOP _IO ('q', 0x87)
-#define IXJCTL_CARDTYPE _IOR ('q', 0x88, int)
-#define IXJCTL_DSP_TYPE _IOR ('q', 0x8C, int)
-#define IXJCTL_DSP_VERSION _IOR ('q', 0x8D, int)
-#define IXJCTL_DSP_IDLE _IO ('q', 0x8E)
-#define IXJCTL_TESTRAM _IO ('q', 0x8F)
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the record settings of the DSP
-*
-* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
-* Setting a lower depth reduces latency, but increases the demand of the
-* application to service the driver without frame loss. The DSP has 480
-* bytes of physical buffer memory for the record channel so the true
-* maximum limit is determined by how many frames will fit in the buffer.
-*
-* 1 uncompressed (480 byte) 16-bit linear frame.
-* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
-* 15 TrueSpeech 8.5 frames.
-* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
-*
-* The default in the driver is currently set to 2 frames.
-*
-* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
-* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
-* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given
-* against over-scaling, if the multiplication factor times the input
-* signal exceeds 16 bits, overflow distortion will occur. The default
-* setting is 0x100 (1.0).
-*
-* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
-* the most recently recorded frame as a 16 bit value.
-******************************************************************************/
-
-#define IXJCTL_REC_CODEC _IOW ('q', 0x90, int)
-#define IXJCTL_REC_START _IO ('q', 0x92)
-#define IXJCTL_REC_STOP _IO ('q', 0x93)
-#define IXJCTL_REC_DEPTH _IOW ('q', 0x94, int)
-#define IXJCTL_FRAME _IOW ('q', 0x95, int)
-#define IXJCTL_REC_VOLUME _IOW ('q', 0x96, int)
-#define IXJCTL_REC_LEVEL _IO ('q', 0x97)
-
-typedef enum{
-f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
-f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
-f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
-f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
-f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
-f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
-f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
-f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
-lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
-}IXJ_FILTER_FREQ;
-
-typedef struct
-{
- unsigned int filter;
- IXJ_FILTER_FREQ freq;
- char enable;
-}IXJ_FILTER;
-
-#define IXJCTL_SET_FILTER _IOW ('q', 0x98, IXJ_FILTER *)
-#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0x9B, int)
-/******************************************************************************
-*
-* This IOCTL allows you to reassign values in the tone index table. The
-* tone table has 32 entries (0 - 31), but the driver only allows entries
-* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
-* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
-* The positions used internally for Call Progress Tones are as follows:
-* Dial Tone - 25
-* Ring Back - 26
-* Busy Signal - 27
-*
-* The freq values are calculated as:
-* freq = cos(2 * PI * frequency / 8000)
-*
-* The most commonly needed values are already calculated and listed in the
-* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with
-* different gains, if you are only using a single frequency set the unused
-* one to 0.
-*
-* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
-* increments.
-*
-******************************************************************************/
-
-typedef enum
-{
-hz20 = 0x7ffa,
-hz50 = 0x7fe5,
-hz133 = 0x7f4c,
-hz200 = 0x7e6b,
-hz261 = 0x7d50, /* .63 C1 */
-hz277 = 0x7cfa, /* .18 CS1 */
-hz293 = 0x7c9f, /* .66 D1 */
-hz300 = 0x7c75,
-hz311 = 0x7c32, /* .13 DS1 */
-hz329 = 0x7bbf, /* .63 E1 */
-hz330 = 0x7bb8,
-hz340 = 0x7b75,
-hz349 = 0x7b37, /* .23 F1 */
-hz350 = 0x7b30,
-hz360 = 0x7ae9,
-hz369 = 0x7aa8, /* .99 FS1 */
-hz380 = 0x7a56,
-hz392 = 0x79fa, /* .00 G1 */
-hz400 = 0x79bb,
-hz415 = 0x7941, /* .30 GS1 */
-hz420 = 0x7918,
-hz425 = 0x78ee,
-hz435 = 0x7899,
-hz440 = 0x786d, /* .00 A1 */
-hz445 = 0x7842,
-hz450 = 0x7815,
-hz452 = 0x7803,
-hz466 = 0x7784, /* .16 AS1 */
-hz475 = 0x7731,
-hz480 = 0x7701,
-hz493 = 0x7685, /* .88 B1 */
-hz494 = 0x767b,
-hz500 = 0x7640,
-hz520 = 0x7578,
-hz523 = 0x7559, /* .25 C2 */
-hz525 = 0x7544,
-hz540 = 0x74a7,
-hz554 = 0x7411, /* .37 CS2 */
-hz587 = 0x72a1, /* .33 D2 */
-hz590 = 0x727f,
-hz600 = 0x720b,
-hz620 = 0x711e,
-hz622 = 0x7106, /* .25 DS2 */
-hz659 = 0x6f3b, /* .26 E2 */
-hz660 = 0x6f2e,
-hz698 = 0x6d3d, /* .46 F2 */
-hz700 = 0x6d22,
-hz739 = 0x6b09, /* .99 FS2 */
-hz740 = 0x6afa,
-hz750 = 0x6a6c,
-hz770 = 0x694b,
-hz783 = 0x688b, /* .99 G2 */
-hz800 = 0x678d,
-hz816 = 0x6698,
-hz830 = 0x65bf, /* .61 GS2 */
-hz850 = 0x6484,
-hz857 = 0x6414,
-hz880 = 0x629f, /* .00 A2 */
-hz900 = 0x6154,
-hz932 = 0x5f35, /* .33 AS2 */
-hz935 = 0x5f01,
-hz941 = 0x5e9a,
-hz942 = 0x5e88,
-hz950 = 0x5dfd,
-hz975 = 0x5c44,
-hz1000 = 0x5a81,
-hz1020 = 0x5912,
-hz1050 = 0x56e2,
-hz1100 = 0x5320,
-hz1140 = 0x5007,
-hz1200 = 0x4b3b,
-hz1209 = 0x4a80,
-hz1215 = 0x4a02,
-hz1250 = 0x471c,
-hz1300 = 0x42e0,
-hz1330 = 0x4049,
-hz1336 = 0x3fc4,
-hz1366 = 0x3d22,
-hz1380 = 0x3be4,
-hz1400 = 0x3a1b,
-hz1450 = 0x3596,
-hz1477 = 0x331c,
-hz1500 = 0x30fb,
-hz1600 = 0x278d,
-hz1633 = 0x2462,
-hz1638 = 0x23e7,
-hz1645 = 0x233a,
-hz1750 = 0x18f8,
-hz1800 = 0x1405,
-hz1860 = 0xe0b,
-hz2100 = 0xf5f6,
-hz2450 = 0xd3b3
-}IXJ_FREQ;
-
-typedef enum
-{
-C1 = hz261,
-CS1 = hz277,
-D1 = hz293,
-DS1 = hz311,
-E1 = hz329,
-F1 = hz349,
-FS1 = hz369,
-G1 = hz392,
-GS1 = hz415,
-A1 = hz440,
-AS1 = hz466,
-B1 = hz493,
-C2 = hz523,
-CS2 = hz554,
-D2 = hz587,
-DS2 = hz622,
-E2 = hz659,
-F2 = hz698,
-FS2 = hz739,
-G2 = hz783,
-GS2 = hz830,
-A2 = hz880,
-AS2 = hz932,
-}IXJ_NOTE;
-
-typedef struct
-{
- int tone_index;
- int freq0;
- int gain0;
- int freq1;
- int gain1;
-}IXJ_TONE;
-
-#define IXJCTL_INIT_TONE _IOW ('q', 0x99, IXJ_TONE *)
-
-/******************************************************************************
-*
-* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
-* Call Progress Tones (CPT). This is accomplished by setting up an array of
-* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
-* the tone sequence. The tone_on_time and tone_off time are in
-* 250 microsecond intervals. A pointer to this array is passed to the
-* driver as the ce element of an IXJ_CADENCE structure. The elements_used
-* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The
-* termination variable defines what to do at the end of a cadence, the
-* options are to play the cadence once and stop, to repeat the last
-* element of the cadence indefinatly, or to repeat the entire cadence
-* indefinatly. The ce variable is a pointer to the array of IXJ_TONE
-* structures. If the freq0 variable is non-zero, the tone table contents
-* for the tone_index are updated to the frequencies and gains defined. It
-* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
-* table indexs are used in a cadence the frequency and gain variables will
-* be ignored.
-*
-* If the array elements contain frequency parameters the driver will
-* initialize the needed tone table elements and begin playing the tone,
-* there is no preset limit on the number of elements in the cadence. If
-* there is more than one frequency used in the cadence, sequential elements
-* of different frequencies MUST use different tone table indexes. Only one
-* cadence can be played at a time. It is possible to build complex
-* cadences with multiple frequencies using 2 tone table indexes by
-* alternating between them.
-*
-******************************************************************************/
-
-typedef struct
-{
- int index;
- int tone_on_time;
- int tone_off_time;
- int freq0;
- int gain0;
- int freq1;
- int gain1;
-}IXJ_CADENCE_ELEMENT;
-
-typedef enum
-{
- PLAY_ONCE,
- REPEAT_LAST_ELEMENT,
- REPEAT_ALL
-}IXJ_CADENCE_TERM;
-
-typedef struct
-{
- int elements_used;
- IXJ_CADENCE_TERM termination;
- IXJ_CADENCE_ELEMENT *ce;
-}IXJ_CADENCE;
-
-#define IXJCTL_TONE_CADENCE _IOW ('q', 0x9A, IXJ_CADENCE *)
-/******************************************************************************
-*
-* This group of IOCTLs deal with the playback settings of the DSP
-*
-******************************************************************************/
-
-#define IXJCTL_PLAY_CODEC _IOW ('q', 0xA0, int)
-#define IXJCTL_PLAY_START _IO ('q', 0xA2)
-#define IXJCTL_PLAY_STOP _IO ('q', 0xA3)
-#define IXJCTL_PLAY_DEPTH _IOW ('q', 0xA4, int)
-#define IXJCTL_PLAY_VOLUME _IOW ('q', 0xA5, int)
-#define IXJCTL_PLAY_LEVEL _IO ('q', 0xA6)
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
-* of the DSP
-*
-* Issueing the IXJCTL_AEC_START command with a value of AEC_OFF has the
-* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar
-* controls.
-******************************************************************************/
-#define IXJCTL_AEC_START _IOW ('q', 0xB0, int)
-#define IXJCTL_AEC_STOP _IO ('q', 0xB1)
-
-#define AEC_OFF 0
-#define AEC_LOW 1
-#define AEC_MED 2
-#define AEC_HIGH 3
-/******************************************************************************
-*
-* Call Progress Tones, DTMF, etc.
-* Tone on and off times are in 250 microsecond intervals so
-* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
-* will set the tone on time of board ixj1 to 360 * 250us = 90ms
-* the default values of tone on and off times is 840 or 210ms
-******************************************************************************/
-
-#define IXJCTL_DTMF_READY _IOR ('q', 0xC0, int)
-#define IXJCTL_GET_DTMF _IOR ('q', 0xC1, int)
-#define IXJCTL_GET_DTMF_ASCII _IOR ('q', 0xC2, int)
-#define IXJCTL_EXCEPTION _IOR ('q', 0xC4, int)
-#define IXJCTL_PLAY_TONE _IOW ('q', 0xC6, char)
-#define IXJCTL_SET_TONE_ON_TIME _IOW ('q', 0xC7, int)
-#define IXJCTL_SET_TONE_OFF_TIME _IOW ('q', 0xC8, int)
-#define IXJCTL_GET_TONE_ON_TIME _IO ('q', 0xC9)
-#define IXJCTL_GET_TONE_OFF_TIME _IO ('q', 0xCA)
-#define IXJCTL_GET_TONE_STATE _IO ('q', 0xCB)
-#define IXJCTL_BUSY _IO ('q', 0xCC)
-#define IXJCTL_RINGBACK _IO ('q', 0xCD)
-#define IXJCTL_DIALTONE _IO ('q', 0xCE)
-
-// This IOCTL replaced both IXJCTL_BUSY_STOP and IXJCTL_RINGBACK_STOP and
-// should be used from now on to stop all Call Progress Tones. It will
-// actually abort any tone, regardless of time left in the tone_on_time
-// and tone_off_time counters.
-#define IXJCTL_CPT_STOP _IO ('q', 0xCF)
-
-/******************************************************************************
-* LineJack specific IOCTLs
-*
-* The lsb 4 bits of the LED argument represent the state of each of the 4
-* LED's on the LineJack
-******************************************************************************/
-
-#define IXJCTL_SET_LED _IOW ('q', 0xD0, int)
-#define IXJCTL_MIXER _IOW ('q', 0xD1, int)
-
-/******************************************************************************
-*
-* The master volume controls use attenuation with 32 levels from 0 to -62dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_MASTER_L 0x0100
-#define MIXER_MASTER_R 0x0200
-#define ATT00DB 0x00
-#define ATT02DB 0x01
-#define ATT04DB 0x02
-#define ATT06DB 0x03
-#define ATT08DB 0x04
-#define ATT10DB 0x05
-#define ATT12DB 0x06
-#define ATT14DB 0x07
-#define ATT16DB 0x08
-#define ATT18DB 0x09
-#define ATT20DB 0x0A
-#define ATT22DB 0x0B
-#define ATT24DB 0x0C
-#define ATT26DB 0x0D
-#define ATT28DB 0x0E
-#define ATT30DB 0x0F
-#define ATT32DB 0x10
-#define ATT34DB 0x11
-#define ATT36DB 0x12
-#define ATT38DB 0x13
-#define ATT40DB 0x14
-#define ATT42DB 0x15
-#define ATT44DB 0x16
-#define ATT46DB 0x17
-#define ATT48DB 0x18
-#define ATT50DB 0x19
-#define ATT52DB 0x1A
-#define ATT54DB 0x1B
-#define ATT56DB 0x1C
-#define ATT58DB 0x1D
-#define ATT60DB 0x1E
-#define ATT62DB 0x1F
-#define MASTER_MUTE 0x80
-
-/******************************************************************************
-*
-* The input volume controls use gain with 32 levels from +12dB to -50dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_PORT_CD_L 0x0600
-#define MIXER_PORT_CD_R 0x0700
-#define MIXER_PORT_LINE_IN_L 0x0800
-#define MIXER_PORT_LINE_IN_R 0x0900
-#define MIXER_PORT_POTS_REC 0x0C00
-#define MIXER_PORT_MIC 0x0E00
-
-#define GAIN12DB 0x00
-#define GAIN10DB 0x01
-#define GAIN08DB 0x02
-#define GAIN06DB 0x03
-#define GAIN04DB 0x04
-#define GAIN02DB 0x05
-#define GAIN00DB 0x06
-#define GAIN_02DB 0x07
-#define GAIN_04DB 0x08
-#define GAIN_06DB 0x09
-#define GAIN_08DB 0x0A
-#define GAIN_10DB 0x0B
-#define GAIN_12DB 0x0C
-#define GAIN_14DB 0x0D
-#define GAIN_16DB 0x0E
-#define GAIN_18DB 0x0F
-#define GAIN_20DB 0x10
-#define GAIN_22DB 0x11
-#define GAIN_24DB 0x12
-#define GAIN_26DB 0x13
-#define GAIN_28DB 0x14
-#define GAIN_30DB 0x15
-#define GAIN_32DB 0x16
-#define GAIN_34DB 0x17
-#define GAIN_36DB 0x18
-#define GAIN_38DB 0x19
-#define GAIN_40DB 0x1A
-#define GAIN_42DB 0x1B
-#define GAIN_44DB 0x1C
-#define GAIN_46DB 0x1D
-#define GAIN_48DB 0x1E
-#define GAIN_50DB 0x1F
-#define INPUT_MUTE 0x80
-
-/******************************************************************************
-*
-* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
-* with steps of 4dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_PORT_POTS_PLAY 0x0F00
-
-#define POTS_ATT_00DB 0x00
-#define POTS_ATT_04DB 0x01
-#define POTS_ATT_08DB 0x02
-#define POTS_ATT_12DB 0x03
-#define POTS_ATT_16DB 0x04
-#define POTS_ATT_20DB 0x05
-#define POTS_ATT_24DB 0x06
-#define POTS_ATT_28DB 0x07
-#define POTS_MUTE 0x80
-
-/******************************************************************************
-*
-* The DAA controls the interface to the PSTN port. The driver loads the
-* US coefficients by default, so if you live in a different country you
-* need to load the set for your countries phone system.
-*
-******************************************************************************/
-#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD2, int)
-
-#define DAA_US 1 //PITA 8kHz
-#define DAA_UK 2 //ISAR34 8kHz
-#define DAA_FRANCE 3 //
-#define DAA_GERMANY 4
-#define DAA_AUSTRALIA 5
-#define DAA_JAPAN 6
-
-/******************************************************************************
-*
-* Use IXJCTL_PORT to set or query the port the card is set to. If the
-* argument is set to PORT_QUERY, the return value of the ioctl will
-* indicate which port is currently in use, otherwise it will change the
-* port.
-*
-******************************************************************************/
-#define IXJCTL_PORT _IOW ('q', 0xD3, int)
-
-#define PORT_QUERY 0
-#define PORT_POTS 1
-#define PORT_PSTN 2
-#define PORT_SPEAKER 3
-#define PORT_HANDSET 4
-
-#define IXJCTL_PSTN_SET_STATE _IOW ('q', 0xD4, int)
-#define IXJCTL_PSTN_GET_STATE _IO ('q', 0xD5)
-
-#define PSTN_ON_HOOK 0
-#define PSTN_RINGING 1
-#define PSTN_OFF_HOOK 2
-#define PSTN_PULSE_DIAL 3
-
-/******************************************************************************
-*
-* The DAA Analog GAIN sets 2 parameters at one time, the recieve gain (AGRR),
-* and the transmit gain (AGX). OR together the components and pass them
-* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB.
-*
-******************************************************************************/
-#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD6, int)
-
-#define AGRR00DB 0x00 // Analog gain in recieve direction 0dB
-#define AGRR3_5DB 0x10 // Analog gain in recieve direction 3.5dB
-#define AGRR06DB 0x30 // Analog gain in recieve direction 6dB
-
-#define AGX00DB 0x00 // Analog gain in transmit direction 0dB
-#define AGX_6DB 0x04 // Analog gain in transmit direction -6dB
-#define AGX3_5DB 0x08 // Analog gain in transmit direction 3.5dB
-#define AGX_2_5B 0x0C // Analog gain in transmit direction -2.5dB
-
-#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD7)
-
-typedef struct
-{
- char month[3];
- char day[3];
- char hour[3];
- char min[3];
- int numlen;
- char number[11];
- int namelen;
- char name[80];
-}IXJ_CID;
-
-#define IXJCTL_CID _IOR ('q', 0xD8, IXJ_CID *)
-/******************************************************************************
-*
-* The wink duration is tunable with this ioctl. The default wink duration
-* is 320ms. You do not need to use this ioctl if you do not require a
-* different wink duration.
-*
-******************************************************************************/
-#define IXJCTL_WINK_DURATION _IOW ('q', 0xD9, int)
-
-/******************************************************************************
-*
-* This ioctl will connect the POTS port to the PSTN port on the LineJACK
-* In order for this to work properly the port selection should be set to
-* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will
-* enable conference calls between PSTN callers and network callers.
-* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
-* passing a 0 turns it back off.
-*
-******************************************************************************/
-#define IXJCTL_POTS_PSTN _IOW ('q', 0xDA, int)
-
-/******************************************************************************
-*
-* IOCTLs added by request.
-*
-* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
-* /usr/include/asm/param.h, this determines the fundamental
-* frequency of the clock ticks on your Linux system. The kernel
-* must be rebuilt if you change this value, also all modules you
-* use (except this one) must be recompiled. The default value
-* is 100, and you only need to use this IOCTL if you use some
-* other value.
-*
-*
-* IXJCTL_RATE sets the number of times per second that the driver polls
-* the DSP. This value cannot be larger than HZ. By
-* increasing both of these values, you may be able to reduce
-* latency because the max hang time that can exist between the
-* driver and the DSP will be reduced.
-*
-******************************************************************************/
-
-#define IXJCTL_HZ _IOW ('q', 0xE0, int)
-#define IXJCTL_RATE _IOW ('q', 0xE1, int)
-#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long)
-#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long)
-#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long)
-#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long)
-#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long)
-#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7)
-
-/******************************************************************************
-*
-* The defined CODECs that can be used with the IXJCTL_REC_CODEC and
-* IXJ_PLAY_CODEC IOCTLs.
-*
-* PCM uLaw mode is a "pass through" mode.
-*
-* 16 bit linear data is signed integer (2's complement form), positive
-* full scale is 7FFFH, negative full scale is 8000H, zero is 0000H
-*
-* 8 bit linear data is signed byte (2's complement form), positive
-* full scale is 7FH, negative full scale is 80H, zero is 00H
-*
-* 8 bit linear WSS data is unsigned byte, positive full scale is FFH,
-* negative full scale is 00H, zero is 80H. This is the format used for
-* 8-bit WAVE format data (Windows Sound System). Data can be converted
-* between the two 8-bit formats by simply inverting the ms bit.
-*
-* G729 currently works most reliably with 10ms frames. Use 20ms and 30ms
-* at your own risk. If you really need larger frame sizes you can
-* concatenate multiple 10ms frames.
-*
-******************************************************************************/
-typedef enum{ // Bytes per 30ms audio frame
-G723_63 = 1, // 24
-G723_53 = 2, // 20
-TS85 = 3, // 32 Does not currently work on LineJack
-TS48 = 4, // 18
-TS41 = 5, // 16
-G728 = 6, // 96 LineJack only!
-G729 = 7, // 30 LineJack only!
-ULAW = 8, // 240
-ALAW = 9, // 240 not implemented DO NOT USE!
-LINEAR16= 10, // 480
-LINEAR8 = 11, // 240
-WSS = 12 // 240
-}IXJ_CODEC;
-/******************************************************************************
-*
-* The intercom IOCTL's short the output from one card to the input of the
-* other and vice versa (actually done in the DSP read function). It is only
-* necessary to execute the IOCTL on one card, but it is necessary to have
-* both devices open to be able to detect hook switch changes. The record
-* codec and rate of each card must match the playback codec and rate of
-* the other card for this to work properly.
-*
-******************************************************************************/
-
-#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int)
-#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int)
-
-/******************************************************************************
-*
-* This IOCTL will decrement the module usage counter so you can force
-* the module to unload after a program bombs.
-*
-******************************************************************************/
-
-#define IXJCTL_MODRESET _IO ('q', 0xFF)
-
-/******************************************************************************
-*
-* Various Defines used for the Quicknet Cards
-*
-******************************************************************************/
-
-#define SYNC_MODE_CODEC 0
-#define SYNC_MODE_DATA 1
-#define SYNC_MODE_POLL 2
-#define SYNC_MODE_HOST 3
-
-#define RECORD_SYNC_MODE 0x5100
-#define PLAYBACK_SYNC_MODE 0x5200
-
-#define USA_RING_CADENCE 0xC0C0
-
-/******************************************************************************
-*
-* The exception structure allows us to multiplex multiple events onto the
-* select() exception set. If any of these flags are set select() will
-* return with a positive indication on the exception set. The dtmf_ready
-* bit indicates if there is data waiting in the DTMF buffer. The
-* hookstate bit is set if there is a change in hookstate status, it does not
-* indicate the current state of the hookswitch. The pstn_ring bit
-* indicates that the DAA on a LineJACK card has detected ring voltage on
-* the PSTN port. The caller_id bit indicates that caller_id data has been
-* recieved and is available. The pstn_wink bit indicates that the DAA on
-* the LineJACK has recieved a wink from the telco switch. The f0, f1, f2
-* and f3 bits indicate that the filter has been triggered by detecting the
-* frequency programmed into that filter.
-*
-******************************************************************************/
-
-typedef struct
-{
- unsigned int dtmf_ready:1;
- unsigned int hookstate:1;
- unsigned int pstn_ring:1;
- unsigned int caller_id:1;
- unsigned int pstn_wink:1;
- unsigned int f0:1;
- unsigned int f1:1;
- unsigned int f2:1;
- unsigned int f3:1;
- unsigned int reserved:23;
-}IXJ_EXCEPT;
-
-typedef union
-{
- IXJ_EXCEPT bits;
- unsigned int bytes;
-}IXJ_EXCEPTION;
-
projects / thirdparty / asterisk.git / commitdiff
