]> git.ipfire.org Git - thirdparty/kernel/stable.git/commitdiff
arm64: dts: allwinner: A64: properly connect USB PHY to port 0
authorAndre Przywara <andre.przywara@arm.com>
Wed, 13 Jan 2021 15:26:23 +0000 (15:26 +0000)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 4 Mar 2021 09:26:13 +0000 (10:26 +0100)
[ Upstream commit cc72570747e43335f4933a24dd74d5653639176a ]

In recent Allwinner SoCs the first USB host controller (HCI0) shares
the first PHY with the MUSB controller. Probably to make this sharing
work, we were avoiding to declare this in the DT. This has two
shortcomings:
- U-Boot (which uses the same .dts) cannot use this port in host mode
  without a PHY linked, so we were loosing one USB port there.
- It requires the MUSB driver to be enabled and loaded, although we
  don't actually use it.

To avoid those issues, let's add this PHY link to the A64 .dtsi file.
After all PHY port 0 *is* connected to HCI0, so we should describe
it as this. Remove the part from the Pinebook DTS which already had
this property.

This makes it work in U-Boot, also improves compatiblity when no MUSB
driver is loaded (for instance in distribution installers).

Fixes: dc03a047df1d ("arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-2-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

index 78c82a665c84a11c9de7a33e40e4aab67a98e792..b0f81802d334b12e187d7e9dadaec85ebb938524 100644 (file)
 };
 
 &ehci0 {
-       phys = <&usbphy 0>;
-       phy-names = "usb";
        status = "okay";
 };
 
 };
 
 &ohci0 {
-       phys = <&usbphy 0>;
-       phy-names = "usb";
        status = "okay";
 };
 
index 367699c8c902858b9a5607e81e4a9e404588dbd3..4c85dfc811c80a3b128eb83102a93b088622124c 100644 (file)
                                 <&ccu CLK_USB_OHCI0>;
                        resets = <&ccu RST_BUS_OHCI0>,
                                 <&ccu RST_BUS_EHCI0>;
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
                        status = "disabled";
                };
 
                        clocks = <&ccu CLK_BUS_OHCI0>,
                                 <&ccu CLK_USB_OHCI0>;
                        resets = <&ccu RST_BUS_OHCI0>;
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
                        status = "disabled";
                };