serial: 8250_fintek: Add support for F81214E

The F81214E is a LPC/eSPI to 2 UART Super I/O chip.

Functionally, it is the same as the F81216E. The only difference
is that the F81216E has 4 UART ports, whereas the F81214E has 2
UART ports.

Signed-off-by: Ravi Rama <ravi.rama@nexthop.ai>
Link: https://patch.msgid.link/20260313194731.2671-1-ravi.rama@nexthop.ai
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index b4461a89b8d0caa56939dd85fc1947d2fba43988..976c5748905c1227e4d2ac8ecb28ec5133f7e1c8 100644 (file)
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *  Probe for F81216A LPC to 4 UART
+ *  Probe for F81216A LPC to 4 UART and F81214E LPC/eSPI to 2 UART
  *
  *  Copyright (C) 2014-2016 Ricardo Ribalda, Qtechnology A/S
  */
@@ -23,6 +23,7 @@
 #define CHIP_ID_F81216AD 0x1602
 #define CHIP_ID_F81216E 0x1617
 #define CHIP_ID_F81216H 0x0501
+#define CHIP_ID_F81214E 0x1417
 #define CHIP_ID_F81216 0x0802
 #define VENDOR_ID1 0x23
 #define VENDOR_ID1_VAL 0x19
@@ -161,6 +162,7 @@ static int fintek_8250_check_id(struct fintek_8250 *pdata)
        case CHIP_ID_F81216AD:
        case CHIP_ID_F81216E:
        case CHIP_ID_F81216H:
+       case CHIP_ID_F81214E:
        case CHIP_ID_F81216:
                break;
        default:
@@ -185,6 +187,7 @@ static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
        case CHIP_ID_F81216AD:
        case CHIP_ID_F81216E:
        case CHIP_ID_F81216H:
+       case CHIP_ID_F81214E:
        case CHIP_ID_F81216:
                *min = F81216_LDN_LOW;
                *max = F81216_LDN_HIGH;
@@ -255,6 +258,7 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
        case CHIP_ID_F81216AD:
        case CHIP_ID_F81216E:
        case CHIP_ID_F81216H:
+       case CHIP_ID_F81214E:
        case CHIP_ID_F81216:
                sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE,
                                   IRQ_SHARE);
@@ -269,6 +273,7 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
        switch (pdata->pid) {
        case CHIP_ID_F81216E: /* 128Bytes FIFO */
        case CHIP_ID_F81216H:
+       case CHIP_ID_F81214E:
        case CHIP_ID_F81966:
        case CHIP_ID_F81866:
                sio_write_mask_reg(pdata, FIFO_CTRL,
@@ -304,6 +309,7 @@ static void fintek_8250_set_termios(struct uart_port *port,
        switch (pdata->pid) {
        case CHIP_ID_F81216E:
        case CHIP_ID_F81216H:
+       case CHIP_ID_F81214E:
                reg = RS485;
                break;
        case CHIP_ID_F81966:
@@ -354,6 +360,7 @@ static void fintek_8250_set_termios_handler(struct uart_8250_port *uart)
        switch (pdata->pid) {
        case CHIP_ID_F81216E:
        case CHIP_ID_F81216H:
+       case CHIP_ID_F81214E:
        case CHIP_ID_F81966:
        case CHIP_ID_F81866:
                uart->port.set_termios = fintek_8250_set_termios;
@@ -446,6 +453,7 @@ static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
                break;
 
        case CHIP_ID_F81216E: /* F81216E does not support RS485 delays */
+       case CHIP_ID_F81214E: /* F81214E does not support RS485 delays */
                uart->port.rs485_config = fintek_8250_rs485_config;
                uart->port.rs485_supported = fintek_8250_rs485_supported;
                break;