+/* $Id: xstatus.h,v 1.1.2.1 2010/01/07 06:11:50 sadanan Exp $ */
/******************************************************************************
*
-* Author: Xilinx, Inc.
+* (c) Copyright 2002-2009 Xilinx, Inc. All rights reserved.
*
+* This file contains confidential and proprietary information of Xilinx, Inc.
+* and is protected under U.S. and international copyright and other
+* intellectual property laws.
*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
+* DISCLAIMER
+* This disclaimer is not a license and does not grant any rights to the
+* materials distributed herewith. Except as otherwise provided in a valid
+* license issued to you by Xilinx, and to the maximum extent permitted by
+* applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
+* FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
+* IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
+* MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
+* and (2) Xilinx shall not be liable (whether in contract or tort, including
+* negligence, or under any other theory of liability) for any loss or damage
+* of any kind or nature related to, arising under or in connection with these
+* materials, including for any direct, or any indirect, special, incidental,
+* or consequential loss or damage (including loss of data, profits, goodwill,
+* or any type of loss or damage suffered as a result of any action brought by
+* a third party) even if such damage or loss was reasonably foreseeable or
+* Xilinx had been advised of the possibility of the same.
*
+* CRITICAL APPLICATIONS
+* Xilinx products are not designed or intended to be fail-safe, or for use in
+* any application requiring fail-safe performance, such as life-support or
+* safety devices or systems, Class III medical devices, nuclear facilities,
+* applications related to the deployment of airbags, or any other applications
+* that could lead to death, personal injury, or severe property or
+* environmental damage (individually and collectively, "Critical
+* Applications"). Customer assumes the sole risk and liability of any use of
+* Xilinx products in Critical Applications, subject only to applicable laws
+* and regulations governing limitations on product liability.
*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
+* THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
+* AT ALL TIMES.
*
******************************************************************************/
/*****************************************************************************/
* @file xstatus.h
*
* This file contains Xilinx software status codes. Status codes have their
-* own data type called XStatus. These codes are used throughout the Xilinx
+* own data type called int. These codes are used throughout the Xilinx
* device drivers.
*
******************************************************************************/
#ifndef XSTATUS_H /* prevent circular inclusions */
#define XSTATUS_H /* by using protection macros */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
/***************************** Include Files *********************************/
+#ifdef NOTNOW
+#include "xil_types.h"
+#include "xil_assert.h"
+#else
#include "xbasic_types.h"
+#endif
/************************** Constant Definitions *****************************/
/*********************** Common statuses 0 - 500 *****************************/
-#define XST_SUCCESS 0L
-#define XST_FAILURE 1L
-#define XST_DEVICE_NOT_FOUND 2L
-#define XST_DEVICE_BLOCK_NOT_FOUND 3L
-#define XST_INVALID_VERSION 4L
-#define XST_DEVICE_IS_STARTED 5L
-#define XST_DEVICE_IS_STOPPED 6L
-#define XST_FIFO_ERROR 7L /* an error occurred during an
+#define XST_SUCCESS 0L
+#define XST_FAILURE 1L
+#define XST_DEVICE_NOT_FOUND 2L
+#define XST_DEVICE_BLOCK_NOT_FOUND 3L
+#define XST_INVALID_VERSION 4L
+#define XST_DEVICE_IS_STARTED 5L
+#define XST_DEVICE_IS_STOPPED 6L
+#define XST_FIFO_ERROR 7L /* an error occurred during an
operation with a FIFO such as
an underrun or overrun, this
error requires the device to
be reset */
-#define XST_RESET_ERROR 8L /* an error occurred which requires
- the device to be reset */
-#define XST_DMA_ERROR 9L /* a DMA error occurred, this error
- typically requires the device
- using the DMA to be reset */
-#define XST_NOT_POLLED 10L /* the device is not configured for
- polled mode operation */
-#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put
- the specified data into */
-#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough
- to hold the expected data */
-#define XST_NO_DATA 13L /* there was no data available */
-#define XST_REGISTER_ERROR 14L /* a register did not contain the
- expected value */
-#define XST_INVALID_PARAM 15L /* an invalid parameter was passed
- into the function */
-#define XST_NOT_SGDMA 16L /* the device is not configured for
- scatter-gather DMA operation */
-#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */
-#define XST_NO_CALLBACK 18L /* a callback has not yet been
- * registered */
-#define XST_NO_FEATURE 19L /* device is not configured with
- * the requested feature */
-#define XST_NOT_INTERRUPT 20L /* device is not configured for
- * interrupt mode operation */
-#define XST_DEVICE_BUSY 21L /* device is busy */
-#define XST_ERROR_COUNT_MAX 22L /* the error counters of a device
- * have maxed out */
-#define XST_IS_STARTED 23L /* used when part of device is
- * already started i.e.
- * sub channel */
-#define XST_IS_STOPPED 24L /* used when part of device is
- * already stopped i.e.
- * sub channel */
+#define XST_RESET_ERROR 8L /* an error occurred which
+ requires the device to be
+ reset */
+#define XST_DMA_ERROR 9L /* a DMA error occurred, this
+ error typically requires the
+ device using the DMA to be
+ reset */
+#define XST_NOT_POLLED 10L /* the device is not configured
+ for polled mode operation */
+#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to
+ put the specified data into
+ */
+#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large
+ enough to hold the expected
+ data */
+#define XST_NO_DATA 13L /* there was no data available
+ */
+#define XST_REGISTER_ERROR 14L /* a register did not contain
+ the expected value */
+#define XST_INVALID_PARAM 15L /* an invalid parameter was
+ passed into the function */
+#define XST_NOT_SGDMA 16L /* the device is not configured
+ for scatter-gather DMA
+ operation */
+#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */
+#define XST_NO_CALLBACK 18L /* a callback has not yet been
+ registered */
+#define XST_NO_FEATURE 19L /* device is not configured with
+ the requested feature */
+#define XST_NOT_INTERRUPT 20L /* device is not configured for
+ interrupt mode operation */
+#define XST_DEVICE_BUSY 21L /* device is busy */
+#define XST_ERROR_COUNT_MAX 22L /* the error counters of a
+ device have maxed out */
+#define XST_IS_STARTED 23L /* used when part of device is
+ already started i.e.
+ sub channel */
+#define XST_IS_STOPPED 24L /* used when part of device is
+ already stopped i.e.
+ sub channel */
+#define XST_DATA_LOST 26L /* driver defined error */
+#define XST_RECV_ERROR 27L /* generic receive error */
+#define XST_SEND_ERROR 28L /* generic transmit error */
+#define XST_NOT_ENABLED 29L /* a requested service is not
+ available because it has not
+ been enabled */
/***************** Utility Component statuses 401 - 500 *********************/
-#define XST_MEMTEST_FAILED 401L /* memory test failed */
+#define XST_MEMTEST_FAILED 401L /* memory test failed */
/***************** Common Components statuses 501 - 1000 *********************/
/********************* Packet Fifo statuses 501 - 510 ************************/
-#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */
-#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */
-#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value
+#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */
+#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */
+#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value
was invalid after reset */
+#define XST_PFIFO_ERROR 504L /* generic packet FIFO error */
+#define XST_PFIFO_DEADLOCK 505L /* packet FIFO is reporting
+ * empty and full simultaneously
+ */
/************************** DMA statuses 511 - 530 ***************************/
-#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer
+#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer
failed */
-#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value
+#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value
was invalid after reset */
-#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains
+#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains
no buffer descriptors ready
to be processed */
-#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */
-#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */
-#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of
+#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */
+#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */
+#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of
the scatter gather list are
being used */
-#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer
+#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer
descriptor which is to be
copied over in the scatter
list is locked */
-#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been
- put into the scatter gather
- list to be commited */
-#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold
+#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have
+ been put into the scatter
+ gather list to be commited */
+#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold
specified was larger than the
total # of buffer descriptors
in the scatter gather list */
-#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has
+#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has
already been created */
-#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has
+#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has
been created */
-#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was
- being started was not committed
- to the list */
-#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start
- has already been used by the
- hardware so it can't be reused
- */
+#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which
+ was being started was not
+ committed to the list */
+#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to
+ start has already been used
+ by the hardware so it can't
+ be reused */
+#define XST_DMA_SG_LIST_ERROR 526L /* general purpose list access
+ error */
+#define XST_DMA_BD_ERROR 527L /* general buffer descriptor
+ error */
/************************** IPIF statuses 531 - 550 ***************************/
-#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width
+#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width
was passed into the function */
-#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at
+#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at
reset was not valid */
-#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt
+#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device intr
status register did not read
back correctly */
-#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status
+#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status
register did not reset when
acked */
-#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable
+#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable
register was not updated when
other registers changed */
-#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt
+#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt
status register did not read
back correctly */
-#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register
- did not reset when acked */
-#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was
- not updated correctly when other
- registers changed */
-#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending
+#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status
+ register did not reset when
+ acked */
+#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register
+ was not updated correctly
+ when other registers changed
+ */
+#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending
+ register did not indicate the
+ expected value */
+#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID
register did not indicate the
expected value */
-#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register
- did not indicate the expected
- value */
+#define XST_IPIF_ERROR 541L /* generic ipif error */
/****************** Device specific statuses 1001 - 4095 *********************/
/********************* Ethernet statuses 1001 - 1050 *************************/
-#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough
- * to hold the minimum number of
- * buffers or descriptors */
-#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */
-#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */
-#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */
-#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Adapter is out of buffers */
-#define XST_EMAC_PARSE_ERROR 1006L /* Invalid adapter init string */
-#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late
+#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big
+ * enough to hold the minimum
+ * number of buffers or
+ * descriptors */
+#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */
+#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */
+#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in
+ * progress */
+#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Driver is out of buffers */
+#define XST_EMAC_PARSE_ERROR 1006L /* Invalid driver init string */
+#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late
* collision on polled send */
/*********************** UART statuses 1051 - 1075 ***************************/
#define XST_UART
-#define XST_UART_INIT_ERROR 1051L
-#define XST_UART_START_ERROR 1052L
-#define XST_UART_CONFIG_ERROR 1053L
-#define XST_UART_TEST_FAIL 1054L
-#define XST_UART_BAUD_ERROR 1055L
-#define XST_UART_BAUD_RANGE 1056L
+#define XST_UART_INIT_ERROR 1051L
+#define XST_UART_START_ERROR 1052L
+#define XST_UART_CONFIG_ERROR 1053L
+#define XST_UART_TEST_FAIL 1054L
+#define XST_UART_BAUD_ERROR 1055L
+#define XST_UART_BAUD_RANGE 1056L
/************************ IIC statuses 1076 - 1100 ***************************/
-#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */
-#define XST_IIC_BUS_BUSY 1077 /* bus found busy */
-#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */
- /* general call address */
-#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */
- /* value after reset not valid */
-#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */
- /* value after reset not valid */
-#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */
- /* value after reset not valid */
-#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */
- /* value after reset not valid */
-#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */
- /* didn't return value written */
-#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */
- /* didn't return value written */
-#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */
- /* didn't return value written */
-#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */
- /* didn't return value written */
-#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */
- /* didn't return written value */
-#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */
+#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */
+#define XST_IIC_BUS_BUSY 1077 /* bus found busy */
+#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with
+ * general call address */
+#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg
+ * value after reset not valid
+ */
+#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design
+ * value after reset not valid
+ */
+#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design
+ * value after reset not valid
+ */
+#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design
+ * value after reset not valid
+ */
+#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register
+ * didn't return value written
+ */
+#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg
+ * didn't return value written
+ */
+#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg
+ * didn't return value written
+ */
+#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg
+ * didn't return value written
+ */
+#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg
+ * didn't return written value
+ */
+#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */
/*********************** ATMC statuses 1101 - 1125 ***************************/
-#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM
+#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM
controller hit the max value
which requires the statistics
to be cleared */
/*********************** Flash statuses 1126 - 1150 **************************/
-#define XST_FLASH_BUSY 1126L /* Flash is erasing or programming */
-#define XST_FLASH_READY 1127L /* Flash is ready for commands */
-#define XST_FLASH_ERROR 1128L /* Flash had detected an internal
- error. Use XFlash_DeviceControl
+#define XST_FLASH_BUSY 1126L /* Flash is erasing or
+ programming */
+#define XST_FLASH_READY 1127L /* Flash is ready for commands
+ */
+#define XST_FLASH_ERROR 1128L /* Flash had detected an
+ internal error. Use
+ XFlash_DeviceControl
to retrieve device specific codes */
-#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state */
-#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state */
-#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by
+#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase
+ state */
+#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write
+ state */
+#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by
driver */
-#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */
-#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */
-#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation
- aborted due to a timeout */
-#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its
+#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */
+#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */
+#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase
+ operation aborted due to a
+ timeout */
+#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its
addressible range */
-#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */
-#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from
- write/erase function with
- XFL_NON_BLOCKING_WRITE/ERASE
- option cleared */
-#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */
+#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */
+#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately
+ from write/erase function
+ with XFL_NON_BLOCKING_WRITE/
+ ERASE option cleared */
+#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */
/*********************** SPI statuses 1151 - 1175 ****************************/
-#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */
-#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */
-#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */
-#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */
-#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */
-#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being
+#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave
+ */
+#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */
+#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit
+ * register */
+#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive
+ * register */
+#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected
+ * yet */
+#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being
* selected */
-#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */
-#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only */
-#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */
+#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as
+ * master */
+#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as
+ * slave-only */
+#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while
+ * disabled */
/********************** OPB Arbiter statuses 1176 - 1200 *********************/
-#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either
- * one master assigned to two or more
- * priorities, or one master not
- * assigned to any priority
+#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have
+ either one master assigned to
+ * two or more priorities, or
+ * one master not assigned
+ * to any priority
*/
-#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the
- * priority levels without first
- * suspending the use of priority
- * levels
+#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify
+ * the priority levels without
+ * first suspending the use of
+ * priority levels
*/
-#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but
- * bus parking was not enabled
- */
-#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed
+#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled
+ * but bus parking was not
+ * enabled */
+#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed
* priority mode to allow the
* priorities to be changed
*/
/************************ Intc statuses 1201 - 1225 **************************/
-#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */
-#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */
+#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */
+#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */
/********************** TmrCtr statuses 1226 - 1250 **************************/
-#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */
+#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */
/********************** WdtTb statuses 1251 - 1275 ***************************/
-#define XST_WDTTB_TIMER_FAILED 1251L
+#define XST_WDTTB_TIMER_FAILED 1251L
/********************** PlbArb statuses 1276 - 1300 **************************/
-#define XST_PLBARB_FAIL_SELFTEST 1276L
+#define XST_PLBARB_FAIL_SELFTEST 1276L
/********************** Plb2Opb statuses 1301 - 1325 *************************/
-#define XST_PLB2OPB_FAIL_SELFTEST 1301L
+#define XST_PLB2OPB_FAIL_SELFTEST 1301L
/********************** Opb2Plb statuses 1326 - 1350 *************************/
-#define XST_OPB2PLB_FAIL_SELFTEST 1326L
+#define XST_OPB2PLB_FAIL_SELFTEST 1326L
/********************** SysAce statuses 1351 - 1360 **************************/
-#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */
+#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted
+ */
/********************** PCI Bridge statuses 1361 - 1375 **********************/
-#define XST_PCI_INVALID_ADDRESS 1361L
+#define XST_PCI_INVALID_ADDRESS 1361L
+
+/********************** FlexRay constants 1400 - 1409 *************************/
+
+#define XST_FR_TX_ERROR 1400
+#define XST_FR_TX_BUSY 1401
+#define XST_FR_BUF_LOCKED 1402
+#define XST_FR_NO_BUF 1403
+
+/****************** USB constants 1410 - 1420 *******************************/
+
+#define XST_USB_ALREADY_CONFIGURED 1410
+#define XST_USB_BUF_ALIGN_ERROR 1411
+#define XST_USB_NO_DESC_AVAILABLE 1412
+#define XST_USB_BUF_TOO_BIG 1413
+#define XST_USB_NO_BUF 1414
+
+/****************** HWICAP constants 1421 - 1430 *****************************/
+
+#define XST_HWICAP_WRITE_DONE 1421
/**************************** Type Definitions *******************************/
-/**
- * The status typedef.
- */
-typedef u32 XStatus;
+typedef int XStatus;
/***************** Macros (Inline Functions) Definitions *********************/
/************************** Function Prototypes ******************************/
-#endif /* end of protection macro */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+++ /dev/null
-/* $Id: xstatus.h,v 1.1.2.1 2009/05/19 14:56:56 meinelte Exp $ */
-/******************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002-2007 Xilinx Inc.
-* All rights reserved.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xstatus.h
-*
-* This file contains Xilinx software status codes. Status codes have their
-* own data type called int. These codes are used throughout the Xilinx
-* device drivers.
-*
-******************************************************************************/
-
-#ifndef XSTATUS_H /* prevent circular inclusions */
-#define XSTATUS_H /* by using protection macros */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions *****************************/
-
-/*********************** Common statuses 0 - 500 *****************************/
-
-#define XST_SUCCESS 0L
-#define XST_FAILURE 1L
-#define XST_DEVICE_NOT_FOUND 2L
-#define XST_DEVICE_BLOCK_NOT_FOUND 3L
-#define XST_INVALID_VERSION 4L
-#define XST_DEVICE_IS_STARTED 5L
-#define XST_DEVICE_IS_STOPPED 6L
-#define XST_FIFO_ERROR 7L /* an error occurred during an
- operation with a FIFO such as
- an underrun or overrun, this
- error requires the device to
- be reset */
-#define XST_RESET_ERROR 8L /* an error occurred which requires
- the device to be reset */
-#define XST_DMA_ERROR 9L /* a DMA error occurred, this error
- typically requires the device
- using the DMA to be reset */
-#define XST_NOT_POLLED 10L /* the device is not configured for
- polled mode operation */
-#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put
- the specified data into */
-#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough
- to hold the expected data */
-#define XST_NO_DATA 13L /* there was no data available */
-#define XST_REGISTER_ERROR 14L /* a register did not contain the
- expected value */
-#define XST_INVALID_PARAM 15L /* an invalid parameter was passed
- into the function */
-#define XST_NOT_SGDMA 16L /* the device is not configured for
- scatter-gather DMA operation */
-#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */
-#define XST_NO_CALLBACK 18L /* a callback has not yet been
- registered */
-#define XST_NO_FEATURE 19L /* device is not configured with
- the requested feature */
-#define XST_NOT_INTERRUPT 20L /* device is not configured for
- interrupt mode operation */
-#define XST_DEVICE_BUSY 21L /* device is busy */
-#define XST_ERROR_COUNT_MAX 22L /* the error counters of a device
- have maxed out */
-#define XST_IS_STARTED 23L /* used when part of device is
- already started i.e.
- sub channel */
-#define XST_IS_STOPPED 24L /* used when part of device is
- already stopped i.e.
- sub channel */
-#define XST_DATA_LOST 26L /* driver defined error */
-#define XST_RECV_ERROR 27L /* generic receive error */
-#define XST_SEND_ERROR 28L /* generic transmit error */
-#define XST_NOT_ENABLED 29L /* a requested service is not
- available because it has not
- been enabled */
-
-/***************** Utility Component statuses 401 - 500 *********************/
-
-#define XST_MEMTEST_FAILED 401L /* memory test failed */
-
-
-/***************** Common Components statuses 501 - 1000 *********************/
-
-/********************* Packet Fifo statuses 501 - 510 ************************/
-
-#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */
-#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */
-#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value
- was invalid after reset */
-#define XST_PFIFO_ERROR 504L /* generic packet FIFO error */
-#define XST_PFIFO_DEADLOCK 505L /* packet FIFO is reporting
- * empty and full simultaneously
- */
-
-/************************** DMA statuses 511 - 530 ***************************/
-
-#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer
- failed */
-#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value
- was invalid after reset */
-#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains
- no buffer descriptors ready
- to be processed */
-#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */
-#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */
-#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of
- the scatter gather list are
- being used */
-#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer
- descriptor which is to be
- copied over in the scatter
- list is locked */
-#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been
- put into the scatter gather
- list to be commited */
-#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold
- specified was larger than the
- total # of buffer descriptors
- in the scatter gather list */
-#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has
- already been created */
-#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has
- been created */
-#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was
- being started was not committed
- to the list */
-#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start
- has already been used by the
- hardware so it can't be reused
- */
-#define XST_DMA_SG_LIST_ERROR 526L /* general purpose list access
- error */
-#define XST_DMA_BD_ERROR 527L /* general buffer descriptor
- error */
-
-/************************** IPIF statuses 531 - 550 ***************************/
-
-#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width
- was passed into the function */
-#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at
- reset was not valid */
-#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt
- status register did not read
- back correctly */
-#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status
- register did not reset when
- acked */
-#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable
- register was not updated when
- other registers changed */
-#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt
- status register did not read
- back correctly */
-#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register
- did not reset when acked */
-#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was
- not updated correctly when other
- registers changed */
-#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending
- register did not indicate the
- expected value */
-#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register
- did not indicate the expected
- value */
-#define XST_IPIF_ERROR 541L /* generic ipif error */
-
-/****************** Device specific statuses 1001 - 4095 *********************/
-
-/********************* Ethernet statuses 1001 - 1050 *************************/
-
-#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough
- * to hold the minimum number of
- * buffers or descriptors */
-#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */
-#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */
-#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */
-#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Driver is out of buffers */
-#define XST_EMAC_PARSE_ERROR 1006L /* Invalid driver init string */
-#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late
- * collision on polled send */
-
-/*********************** UART statuses 1051 - 1075 ***************************/
-#define XST_UART
-
-#define XST_UART_INIT_ERROR 1051L
-#define XST_UART_START_ERROR 1052L
-#define XST_UART_CONFIG_ERROR 1053L
-#define XST_UART_TEST_FAIL 1054L
-#define XST_UART_BAUD_ERROR 1055L
-#define XST_UART_BAUD_RANGE 1056L
-
-
-/************************ IIC statuses 1076 - 1100 ***************************/
-
-#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */
-#define XST_IIC_BUS_BUSY 1077 /* bus found busy */
-#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */
- /* general call address */
-#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */
- /* value after reset not valid */
-#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */
- /* value after reset not valid */
-#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */
- /* value after reset not valid */
-#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */
- /* value after reset not valid */
-#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */
- /* didn't return value written */
-#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */
- /* didn't return value written */
-#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */
- /* didn't return value written */
-#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */
- /* didn't return value written */
-#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */
- /* didn't return written value */
-#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */
-
-/*********************** ATMC statuses 1101 - 1125 ***************************/
-
-#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM
- controller hit the max value
- which requires the statistics
- to be cleared */
-
-/*********************** Flash statuses 1126 - 1150 **************************/
-
-#define XST_FLASH_BUSY 1126L /* Flash is erasing or programming
- */
-#define XST_FLASH_READY 1127L /* Flash is ready for commands */
-#define XST_FLASH_ERROR 1128L /* Flash had detected an internal
- error. Use XFlash_DeviceControl
- to retrieve device specific codes
- */
-#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state
- */
-#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state
- */
-#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by
- driver */
-#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */
-#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */
-#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation
- aborted due to a timeout */
-#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its
- addressible range */
-#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */
-#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from
- write/erase function with
- XFL_NON_BLOCKING_WRITE/ERASE
- option cleared */
-#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */
-
-/*********************** SPI statuses 1151 - 1175 ****************************/
-
-#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */
-#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */
-#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */
-#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */
-#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */
-#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being
- * selected */
-#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */
-#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only
- */
-#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */
-
-/********************** OPB Arbiter statuses 1176 - 1200 *********************/
-
-#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either
- * one master assigned to two or more
- * priorities, or one master not
- * assigned to any priority
- */
-#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the
- * priority levels without first
- * suspending the use of priority
- * levels
- */
-#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but
- * bus parking was not enabled
- */
-#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed
- * priority mode to allow the
- * priorities to be changed
- */
-
-/************************ Intc statuses 1201 - 1225 **************************/
-
-#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */
-#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */
-
-/********************** TmrCtr statuses 1226 - 1250 **************************/
-
-#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */
-
-/********************** WdtTb statuses 1251 - 1275 ***************************/
-
-#define XST_WDTTB_TIMER_FAILED 1251L
-
-/********************** PlbArb statuses 1276 - 1300 **************************/
-
-#define XST_PLBARB_FAIL_SELFTEST 1276L
-
-/********************** Plb2Opb statuses 1301 - 1325 *************************/
-
-#define XST_PLB2OPB_FAIL_SELFTEST 1301L
-
-/********************** Opb2Plb statuses 1326 - 1350 *************************/
-
-#define XST_OPB2PLB_FAIL_SELFTEST 1326L
-
-/********************** SysAce statuses 1351 - 1360 **************************/
-
-#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */
-
-/********************** PCI Bridge statuses 1361 - 1375 **********************/
-
-#define XST_PCI_INVALID_ADDRESS 1361L
-
-/********************** FlexRay constants 1400 - 1409 *************************/
-
-#define XST_FR_TX_ERROR 1400
-#define XST_FR_TX_BUSY 1401
-#define XST_FR_BUF_LOCKED 1402
-#define XST_FR_NO_BUF 1403
-
-/****************** USB constants 1410 - 1420 *******************************/
-
-#define XST_USB_ALREADY_CONFIGURED 1410
-#define XST_USB_BUF_ALIGN_ERROR 1411
-#define XST_USB_NO_DESC_AVAILABLE 1412
-#define XST_USB_BUF_TOO_BIG 1413
-#define XST_USB_NO_BUF 1414
-
-/****************** HWICAP constants 1421 - 1430 *****************************/
-
-#define XST_HWICAP_WRITE_DONE 1421
-
-/**************************** Type Definitions *******************************/
-
-typedef int XStatus;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-
-/************************** Function Prototypes ******************************/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* end of protection macro */
projects / thirdparty / u-boot.git / commitdiff
