--- /dev/null
+From 9bcac97dc42d2f4da8229d18feb0fe2b1ce523a2 Mon Sep 17 00:00:00 2001
+From: Sean Christopherson <seanjc@google.com>
+Date: Fri, 4 Apr 2025 12:38:17 -0700
+Subject: KVM: x86: Reset IRTE to host control if *new* route isn't postable
+
+From: Sean Christopherson <seanjc@google.com>
+
+commit 9bcac97dc42d2f4da8229d18feb0fe2b1ce523a2 upstream.
+
+Restore an IRTE back to host control (remapped or posted MSI mode) if the
+*new* GSI route prevents posting the IRQ directly to a vCPU, regardless of
+the GSI routing type. Updating the IRTE if and only if the new GSI is an
+MSI results in KVM leaving an IRTE posting to a vCPU.
+
+The dangling IRTE can result in interrupts being incorrectly delivered to
+the guest, and in the worst case scenario can result in use-after-free,
+e.g. if the VM is torn down, but the underlying host IRQ isn't freed.
+
+Fixes: efc644048ecd ("KVM: x86: Update IRTE for posted-interrupts")
+Fixes: 411b44ba80ab ("svm: Implements update_pi_irte hook to setup posted interrupt")
+Cc: stable@vger.kernel.org
+Signed-off-by: Sean Christopherson <seanjc@google.com>
+Message-ID: <20250404193923.1413163-3-seanjc@google.com>
+Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/x86/kvm/svm/avic.c | 58 +++++++++++++++++++++--------------------
+ arch/x86/kvm/vmx/posted_intr.c | 28 +++++++------------
+ 2 files changed, 41 insertions(+), 45 deletions(-)
+
+--- a/arch/x86/kvm/svm/avic.c
++++ b/arch/x86/kvm/svm/avic.c
+@@ -801,6 +801,7 @@ int svm_update_pi_irte(struct kvm *kvm,
+ {
+ struct kvm_kernel_irq_routing_entry *e;
+ struct kvm_irq_routing_table *irq_rt;
++ bool enable_remapped_mode = true;
+ int idx, ret = 0;
+
+ if (!kvm_arch_has_assigned_device(kvm) ||
+@@ -838,6 +839,8 @@ int svm_update_pi_irte(struct kvm *kvm,
+ kvm_vcpu_apicv_active(&svm->vcpu)) {
+ struct amd_iommu_pi_data pi;
+
++ enable_remapped_mode = false;
++
+ /* Try to enable guest_mode in IRTE */
+ pi.base = __sme_set(page_to_phys(svm->avic_backing_page) &
+ AVIC_HPA_MASK);
+@@ -856,33 +859,6 @@ int svm_update_pi_irte(struct kvm *kvm,
+ */
+ if (!ret && pi.is_guest_mode)
+ svm_ir_list_add(svm, &pi);
+- } else {
+- /* Use legacy mode in IRTE */
+- struct amd_iommu_pi_data pi;
+-
+- /**
+- * Here, pi is used to:
+- * - Tell IOMMU to use legacy mode for this interrupt.
+- * - Retrieve ga_tag of prior interrupt remapping data.
+- */
+- pi.prev_ga_tag = 0;
+- pi.is_guest_mode = false;
+- ret = irq_set_vcpu_affinity(host_irq, &pi);
+-
+- /**
+- * Check if the posted interrupt was previously
+- * setup with the guest_mode by checking if the ga_tag
+- * was cached. If so, we need to clean up the per-vcpu
+- * ir_list.
+- */
+- if (!ret && pi.prev_ga_tag) {
+- int id = AVIC_GATAG_TO_VCPUID(pi.prev_ga_tag);
+- struct kvm_vcpu *vcpu;
+-
+- vcpu = kvm_get_vcpu_by_id(kvm, id);
+- if (vcpu)
+- svm_ir_list_del(to_svm(vcpu), &pi);
+- }
+ }
+
+ if (!ret && svm) {
+@@ -898,6 +874,34 @@ int svm_update_pi_irte(struct kvm *kvm,
+ }
+
+ ret = 0;
++ if (enable_remapped_mode) {
++ /* Use legacy mode in IRTE */
++ struct amd_iommu_pi_data pi;
++
++ /**
++ * Here, pi is used to:
++ * - Tell IOMMU to use legacy mode for this interrupt.
++ * - Retrieve ga_tag of prior interrupt remapping data.
++ */
++ pi.prev_ga_tag = 0;
++ pi.is_guest_mode = false;
++ ret = irq_set_vcpu_affinity(host_irq, &pi);
++
++ /**
++ * Check if the posted interrupt was previously
++ * setup with the guest_mode by checking if the ga_tag
++ * was cached. If so, we need to clean up the per-vcpu
++ * ir_list.
++ */
++ if (!ret && pi.prev_ga_tag) {
++ int id = AVIC_GATAG_TO_VCPUID(pi.prev_ga_tag);
++ struct kvm_vcpu *vcpu;
++
++ vcpu = kvm_get_vcpu_by_id(kvm, id);
++ if (vcpu)
++ svm_ir_list_del(to_svm(vcpu), &pi);
++ }
++ }
+ out:
+ srcu_read_unlock(&kvm->irq_srcu, idx);
+ return ret;
+--- a/arch/x86/kvm/vmx/posted_intr.c
++++ b/arch/x86/kvm/vmx/posted_intr.c
+@@ -270,6 +270,7 @@ int pi_update_irte(struct kvm *kvm, unsi
+ {
+ struct kvm_kernel_irq_routing_entry *e;
+ struct kvm_irq_routing_table *irq_rt;
++ bool enable_remapped_mode = true;
+ struct kvm_lapic_irq irq;
+ struct kvm_vcpu *vcpu;
+ struct vcpu_data vcpu_info;
+@@ -308,21 +309,8 @@ int pi_update_irte(struct kvm *kvm, unsi
+
+ kvm_set_msi_irq(kvm, e, &irq);
+ if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu) ||
+- !kvm_irq_is_postable(&irq)) {
+- /*
+- * Make sure the IRTE is in remapped mode if
+- * we don't handle it in posted mode.
+- */
+- ret = irq_set_vcpu_affinity(host_irq, NULL);
+- if (ret < 0) {
+- printk(KERN_INFO
+- "failed to back to remapped mode, irq: %u\n",
+- host_irq);
+- goto out;
+- }
+-
++ !kvm_irq_is_postable(&irq))
+ continue;
+- }
+
+ vcpu_info.pi_desc_addr = __pa(&to_vmx(vcpu)->pi_desc);
+ vcpu_info.vector = irq.vector;
+@@ -330,11 +318,12 @@ int pi_update_irte(struct kvm *kvm, unsi
+ trace_kvm_pi_irte_update(host_irq, vcpu->vcpu_id, e->gsi,
+ vcpu_info.vector, vcpu_info.pi_desc_addr, set);
+
+- if (set)
+- ret = irq_set_vcpu_affinity(host_irq, &vcpu_info);
+- else
+- ret = irq_set_vcpu_affinity(host_irq, NULL);
++ if (!set)
++ continue;
+
++ enable_remapped_mode = false;
++
++ ret = irq_set_vcpu_affinity(host_irq, &vcpu_info);
+ if (ret < 0) {
+ printk(KERN_INFO "%s: failed to update PI IRTE\n",
+ __func__);
+@@ -342,6 +331,9 @@ int pi_update_irte(struct kvm *kvm, unsi
+ }
+ }
+
++ if (enable_remapped_mode)
++ ret = irq_set_vcpu_affinity(host_irq, NULL);
++
+ ret = 0;
+ out:
+ srcu_read_unlock(&kvm->irq_srcu, idx);
--- /dev/null
+From 7094832b5ac861b0bd7ed8866c93cb15ef619996 Mon Sep 17 00:00:00 2001
+From: Stephan Gerhold <stephan.gerhold@linaro.org>
+Date: Tue, 8 Apr 2025 19:22:47 +0200
+Subject: serial: msm: Configure correct working mode before starting earlycon
+
+From: Stephan Gerhold <stephan.gerhold@linaro.org>
+
+commit 7094832b5ac861b0bd7ed8866c93cb15ef619996 upstream.
+
+The MSM UART DM controller supports different working modes, e.g. DMA or
+the "single-character mode", where all reads/writes operate on a single
+character rather than 4 chars (32-bit) at once. When using earlycon,
+__msm_console_write() always writes 4 characters at a time, but we don't
+know which mode the bootloader was using and we don't set the mode either.
+
+This causes garbled output if the bootloader was using the single-character
+mode, because only every 4th character appears in the serial console, e.g.
+
+ "[ 00oni pi 000xf0[ 00i s 5rm9(l)l s 1 1 SPMTA 7:C 5[ 00A ade k d[
+ 00ano:ameoi .Q1B[ 00ac _idaM00080oo'"
+
+If the bootloader was using the DMA ("DM") mode, output would likely fail
+entirely. Later, when the full serial driver probes, the port is
+re-initialized and output works as expected.
+
+Fix this also for earlycon by clearing the DMEN register and
+reset+re-enable the transmitter to apply the change. This ensures the
+transmitter is in the expected state before writing any output.
+
+Cc: stable <stable@kernel.org>
+Fixes: 0efe72963409 ("tty: serial: msm: Add earlycon support")
+Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
+Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
+Link: https://lore.kernel.org/r/20250408-msm-serial-earlycon-v1-1-429080127530@linaro.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/msm_serial.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/tty/serial/msm_serial.c
++++ b/drivers/tty/serial/msm_serial.c
+@@ -1732,6 +1732,12 @@ msm_serial_early_console_setup_dm(struct
+ if (!device->port.membase)
+ return -ENODEV;
+
++ /* Disable DM / single-character modes */
++ msm_write(&device->port, 0, UARTDM_DMEN);
++ msm_write(&device->port, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
++ msm_write(&device->port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
++ msm_write(&device->port, MSM_UART_CR_TX_ENABLE, MSM_UART_CR);
++
+ device->con->write = msm_serial_early_write_dm;
+ return 0;
+ }
--- /dev/null
+From e1ca3ff28ab1e2c1e70713ef3fa7943c725742c3 Mon Sep 17 00:00:00 2001
+From: Ryo Takakura <ryotkkr98@gmail.com>
+Date: Sat, 12 Apr 2025 09:18:47 +0900
+Subject: serial: sifive: lock port in startup()/shutdown() callbacks
+
+From: Ryo Takakura <ryotkkr98@gmail.com>
+
+commit e1ca3ff28ab1e2c1e70713ef3fa7943c725742c3 upstream.
+
+startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS.
+The register is also accessed from write() callback.
+
+If console were printing and startup()/shutdown() callback
+gets called, its access to the register could be overwritten.
+
+Add port->lock to startup()/shutdown() callbacks to make sure
+their access to SIFIVE_SERIAL_IE_OFFS is synchronized against
+write() callback.
+
+Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
+Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
+Reviewed-by: Petr Mladek <pmladek@suse.com>
+Cc: stable@vger.kernel.org
+Reviewed-by: John Ogness <john.ogness@linutronix.de>
+Rule: add
+Link: https://lore.kernel.org/stable/20250330003522.386632-1-ryotkkr98%40gmail.com
+Link: https://lore.kernel.org/r/20250412001847.183221-1-ryotkkr98@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/sifive.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/tty/serial/sifive.c
++++ b/drivers/tty/serial/sifive.c
+@@ -595,8 +595,11 @@ static void sifive_serial_break_ctl(stru
+ static int sifive_serial_startup(struct uart_port *port)
+ {
+ struct sifive_serial_port *ssp = port_to_sifive_serial_port(port);
++ unsigned long flags;
+
++ uart_port_lock_irqsave(&ssp->port, &flags);
+ __ssp_enable_rxwm(ssp);
++ uart_port_unlock_irqrestore(&ssp->port, flags);
+
+ return 0;
+ }
+@@ -604,9 +607,12 @@ static int sifive_serial_startup(struct
+ static void sifive_serial_shutdown(struct uart_port *port)
+ {
+ struct sifive_serial_port *ssp = port_to_sifive_serial_port(port);
++ unsigned long flags;
+
++ uart_port_lock_irqsave(&ssp->port, &flags);
+ __ssp_disable_rxwm(ssp);
+ __ssp_disable_txwm(ssp);
++ uart_port_unlock_irqrestore(&ssp->port, flags);
+ }
+
+ /**
mcb-fix-a-double-free-bug-in-chameleon_parse_gdd.patch
usb-storage-quirk-for-adata-portable-hdd-ch94.patch
mei-me-add-panther-lake-h-did.patch
+kvm-x86-reset-irte-to-host-control-if-new-route-isn-t-postable.patch
+serial-msm-configure-correct-working-mode-before-starting-earlycon.patch
+serial-sifive-lock-port-in-startup-shutdown-callbacks.patch
+usb-serial-ftdi_sio-add-support-for-abacus-electrics-optical-probe.patch
+usb-serial-option-add-sierra-wireless-em9291.patch
+usb-serial-simple-add-owon-hds200-series-oscilloscope-support.patch
+usb-cdns3-fix-deadlock-when-using-ncm-gadget.patch
+usb-chipidea-ci_hdrc_imx-fix-usbmisc-handling.patch
+usb-chipidea-ci_hdrc_imx-fix-call-balance-of-regulator-routines.patch
+usb-chipidea-ci_hdrc_imx-implement-usb_phy_init-error-handling.patch
+usb-ohci-add-quirk-for-ls7a-ohci-controller-rev-0x02.patch
+usb-dwc3-gadget-check-that-event-count-does-not-exceed-event-buffer-length.patch
+usb-quirks-add-delay_init-quirk-for-silicon-motion-flash-drive.patch
+usb-quirks-add-delay-init-quirk-for-sandisk-3.2gen1-flash-drive.patch
+usb-vli-disk-crashes-if-lpm-is-used.patch
+usb-wdm-handle-io-errors-in-wdm_wwan_port_start.patch
+usb-wdm-close-race-between-wdm_open-and-wdm_wwan_port_stop.patch
+usb-wdm-wdm_wwan_port_tx_complete-mutex-in-atomic-context.patch
+usb-wdm-add-annotation.patch
--- /dev/null
+From a1059896f2bfdcebcdc7153c3be2307ea319501f Mon Sep 17 00:00:00 2001
+From: Ralph Siemsen <ralph.siemsen@linaro.org>
+Date: Tue, 18 Mar 2025 11:09:32 -0400
+Subject: usb: cdns3: Fix deadlock when using NCM gadget
+
+From: Ralph Siemsen <ralph.siemsen@linaro.org>
+
+commit a1059896f2bfdcebcdc7153c3be2307ea319501f upstream.
+
+The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit
+58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget").
+
+Under PREEMPT_RT the deadlock can be readily triggered by heavy network
+traffic, for example using "iperf --bidir" over NCM ethernet link.
+
+The deadlock occurs because the threaded interrupt handler gets
+preempted by a softirq, but both are protected by the same spinlock.
+Prevent deadlock by disabling softirq during threaded irq handler.
+
+Cc: stable <stable@kernel.org>
+Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
+Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
+Acked-by: Peter Chen <peter.chen@kernel.org>
+Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+Link: https://lore.kernel.org/r/20250318-rfs-cdns3-deadlock-v2-1-bfd9cfcee732@linaro.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/cdns3/cdns3-gadget.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/cdns3/cdns3-gadget.c
++++ b/drivers/usb/cdns3/cdns3-gadget.c
+@@ -1960,6 +1960,7 @@ static irqreturn_t cdns3_device_thread_i
+ unsigned int bit;
+ unsigned long reg;
+
++ local_bh_disable();
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ reg = readl(&priv_dev->regs->usb_ists);
+@@ -2001,6 +2002,7 @@ static irqreturn_t cdns3_device_thread_i
+ irqend:
+ writel(~0, &priv_dev->regs->ep_ien);
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
++ local_bh_enable();
+
+ return ret;
+ }
--- /dev/null
+From 8cab0e9a3f3e8d700179e0d6141643d54a267fd5 Mon Sep 17 00:00:00 2001
+From: Fedor Pchelkin <pchelkin@ispras.ru>
+Date: Sun, 16 Mar 2025 13:26:55 +0300
+Subject: usb: chipidea: ci_hdrc_imx: fix call balance of regulator routines
+
+From: Fedor Pchelkin <pchelkin@ispras.ru>
+
+commit 8cab0e9a3f3e8d700179e0d6141643d54a267fd5 upstream.
+
+Upon encountering errors during the HSIC pinctrl handling section the
+regulator should be disabled.
+
+Use devm_add_action_or_reset() to let the regulator-disabling routine be
+handled by device resource management stack.
+
+Found by Linux Verification Center (linuxtesting.org).
+
+Fixes: 4d6141288c33 ("usb: chipidea: imx: pinctrl for HSIC is optional")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
+Acked-by: Peter Chen <peter.chen@kernel.org>
+Link: https://lore.kernel.org/r/20250316102658.490340-3-pchelkin@ispras.ru
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/chipidea/ci_hdrc_imx.c | 25 +++++++++++++++++--------
+ 1 file changed, 17 insertions(+), 8 deletions(-)
+
+--- a/drivers/usb/chipidea/ci_hdrc_imx.c
++++ b/drivers/usb/chipidea/ci_hdrc_imx.c
+@@ -322,6 +322,13 @@ static int ci_hdrc_imx_notify_event(stru
+ return ret;
+ }
+
++static void ci_hdrc_imx_disable_regulator(void *arg)
++{
++ struct ci_hdrc_imx_data *data = arg;
++
++ regulator_disable(data->hsic_pad_regulator);
++}
++
+ static int ci_hdrc_imx_probe(struct platform_device *pdev)
+ {
+ struct ci_hdrc_imx_data *data;
+@@ -379,6 +386,13 @@ static int ci_hdrc_imx_probe(struct plat
+ "Failed to enable HSIC pad regulator\n");
+ goto err_put;
+ }
++ ret = devm_add_action_or_reset(dev,
++ ci_hdrc_imx_disable_regulator, data);
++ if (ret) {
++ dev_err(dev,
++ "Failed to add regulator devm action\n");
++ goto err_put;
++ }
+ }
+ }
+
+@@ -417,11 +431,11 @@ static int ci_hdrc_imx_probe(struct plat
+
+ ret = imx_get_clks(dev);
+ if (ret)
+- goto disable_hsic_regulator;
++ goto qos_remove_request;
+
+ ret = imx_prepare_enable_clks(dev);
+ if (ret)
+- goto disable_hsic_regulator;
++ goto qos_remove_request;
+
+ data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
+ if (IS_ERR(data->phy)) {
+@@ -501,10 +515,7 @@ disable_device:
+ ci_hdrc_remove_device(data->ci_pdev);
+ err_clk:
+ imx_disable_unprepare_clks(dev);
+-disable_hsic_regulator:
+- if (data->hsic_pad_regulator)
+- /* don't overwrite original ret (cf. EPROBE_DEFER) */
+- regulator_disable(data->hsic_pad_regulator);
++qos_remove_request:
+ if (pdata.flags & CI_HDRC_PMQOS)
+ cpu_latency_qos_remove_request(&data->pm_qos_req);
+ data->ci_pdev = NULL;
+@@ -531,8 +542,6 @@ static void ci_hdrc_imx_remove(struct pl
+ imx_disable_unprepare_clks(&pdev->dev);
+ if (data->plat_data->flags & CI_HDRC_PMQOS)
+ cpu_latency_qos_remove_request(&data->pm_qos_req);
+- if (data->hsic_pad_regulator)
+- regulator_disable(data->hsic_pad_regulator);
+ }
+ if (data->usbmisc_data)
+ put_device(data->usbmisc_data->dev);
--- /dev/null
+From 4e28f79e3dffa52d327b46d1a78dac16efb5810b Mon Sep 17 00:00:00 2001
+From: Fedor Pchelkin <pchelkin@ispras.ru>
+Date: Sun, 16 Mar 2025 13:26:54 +0300
+Subject: usb: chipidea: ci_hdrc_imx: fix usbmisc handling
+
+From: Fedor Pchelkin <pchelkin@ispras.ru>
+
+commit 4e28f79e3dffa52d327b46d1a78dac16efb5810b upstream.
+
+usbmisc is an optional device property so it is totally valid for the
+corresponding data->usbmisc_data to have a NULL value.
+
+Check that before dereferencing the pointer.
+
+Found by Linux Verification Center (linuxtesting.org) with Svace static
+analysis tool.
+
+Fixes: 74adad500346 ("usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
+Acked-by: Peter Chen <peter.chen@kernel.org>
+Link: https://lore.kernel.org/r/20250316102658.490340-2-pchelkin@ispras.ru
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/chipidea/ci_hdrc_imx.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/chipidea/ci_hdrc_imx.c
++++ b/drivers/usb/chipidea/ci_hdrc_imx.c
+@@ -509,7 +509,8 @@ disable_hsic_regulator:
+ cpu_latency_qos_remove_request(&data->pm_qos_req);
+ data->ci_pdev = NULL;
+ err_put:
+- put_device(data->usbmisc_data->dev);
++ if (data->usbmisc_data)
++ put_device(data->usbmisc_data->dev);
+ return ret;
+ }
+
+@@ -533,7 +534,8 @@ static void ci_hdrc_imx_remove(struct pl
+ if (data->hsic_pad_regulator)
+ regulator_disable(data->hsic_pad_regulator);
+ }
+- put_device(data->usbmisc_data->dev);
++ if (data->usbmisc_data)
++ put_device(data->usbmisc_data->dev);
+ }
+
+ static void ci_hdrc_imx_shutdown(struct platform_device *pdev)
--- /dev/null
+From 8c531e0a8c2d82509ad97c6d3a1e6217c7ed136d Mon Sep 17 00:00:00 2001
+From: Fedor Pchelkin <pchelkin@ispras.ru>
+Date: Sun, 16 Mar 2025 13:26:56 +0300
+Subject: usb: chipidea: ci_hdrc_imx: implement usb_phy_init() error handling
+
+From: Fedor Pchelkin <pchelkin@ispras.ru>
+
+commit 8c531e0a8c2d82509ad97c6d3a1e6217c7ed136d upstream.
+
+usb_phy_init() may return an error code if e.g. its implementation fails
+to prepare/enable some clocks. And properly rollback on probe error path
+by calling the counterpart usb_phy_shutdown().
+
+Found by Linux Verification Center (linuxtesting.org).
+
+Fixes: be9cae2479f4 ("usb: chipidea: imx: Fix ULPI on imx53")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
+Acked-by: Peter Chen <peter.chen@kernel.org>
+Link: https://lore.kernel.org/r/20250316102658.490340-4-pchelkin@ispras.ru
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/chipidea/ci_hdrc_imx.c | 13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/chipidea/ci_hdrc_imx.c
++++ b/drivers/usb/chipidea/ci_hdrc_imx.c
+@@ -461,7 +461,11 @@ static int ci_hdrc_imx_probe(struct plat
+ of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) {
+ pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL;
+ data->override_phy_control = true;
+- usb_phy_init(pdata.usb_phy);
++ ret = usb_phy_init(pdata.usb_phy);
++ if (ret) {
++ dev_err(dev, "Failed to init phy\n");
++ goto err_clk;
++ }
+ }
+
+ if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
+@@ -470,7 +474,7 @@ static int ci_hdrc_imx_probe(struct plat
+ ret = imx_usbmisc_init(data->usbmisc_data);
+ if (ret) {
+ dev_err(dev, "usbmisc init failed, ret=%d\n", ret);
+- goto err_clk;
++ goto phy_shutdown;
+ }
+
+ data->ci_pdev = ci_hdrc_add_device(dev,
+@@ -479,7 +483,7 @@ static int ci_hdrc_imx_probe(struct plat
+ if (IS_ERR(data->ci_pdev)) {
+ ret = PTR_ERR(data->ci_pdev);
+ dev_err_probe(dev, ret, "ci_hdrc_add_device failed\n");
+- goto err_clk;
++ goto phy_shutdown;
+ }
+
+ if (data->usbmisc_data) {
+@@ -513,6 +517,9 @@ static int ci_hdrc_imx_probe(struct plat
+
+ disable_device:
+ ci_hdrc_remove_device(data->ci_pdev);
++phy_shutdown:
++ if (data->override_phy_control)
++ usb_phy_shutdown(data->phy);
+ err_clk:
+ imx_disable_unprepare_clks(dev);
+ qos_remove_request:
--- /dev/null
+From 63ccd26cd1f6600421795f6ca3e625076be06c9f Mon Sep 17 00:00:00 2001
+From: Frode Isaksen <frode@meta.com>
+Date: Thu, 3 Apr 2025 09:28:03 +0200
+Subject: usb: dwc3: gadget: check that event count does not exceed event buffer length
+
+From: Frode Isaksen <frode@meta.com>
+
+commit 63ccd26cd1f6600421795f6ca3e625076be06c9f upstream.
+
+The event count is read from register DWC3_GEVNTCOUNT.
+There is a check for the count being zero, but not for exceeding the
+event buffer length.
+Check that event count does not exceed event buffer length,
+avoiding an out-of-bounds access when memcpy'ing the event.
+Crash log:
+Unable to handle kernel paging request at virtual address ffffffc0129be000
+pc : __memcpy+0x114/0x180
+lr : dwc3_check_event_buf+0xec/0x348
+x3 : 0000000000000030 x2 : 000000000000dfc4
+x1 : ffffffc0129be000 x0 : ffffff87aad60080
+Call trace:
+__memcpy+0x114/0x180
+dwc3_interrupt+0x24/0x34
+
+Signed-off-by: Frode Isaksen <frode@meta.com>
+Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
+Cc: stable <stable@kernel.org>
+Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/20250403072907.448524-1-fisaksen@baylibre.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc3/gadget.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -4361,6 +4361,12 @@ static irqreturn_t dwc3_check_event_buf(
+ if (!count)
+ return IRQ_NONE;
+
++ if (count > evt->length) {
++ dev_err_ratelimited(dwc->dev, "invalid count(%u) > evt->length(%u)\n",
++ count, evt->length);
++ return IRQ_NONE;
++ }
++
+ evt->count = count;
+ evt->flags |= DWC3_EVENT_PENDING;
+
--- /dev/null
+From bcb60d438547355b8f9ad48645909139b64d3482 Mon Sep 17 00:00:00 2001
+From: Huacai Chen <chenhuacai@loongson.cn>
+Date: Fri, 28 Mar 2025 12:00:59 +0800
+Subject: USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02)
+
+From: Huacai Chen <chenhuacai@loongson.cn>
+
+commit bcb60d438547355b8f9ad48645909139b64d3482 upstream.
+
+The OHCI controller (rev 0x02) under LS7A PCI host has a hardware flaw.
+MMIO register with offset 0x60/0x64 is treated as legacy PS2-compatible
+keyboard/mouse interface, which confuse the OHCI controller. Since OHCI
+only use a 4KB BAR resource indeed, the LS7A OHCI controller's 32KB BAR
+is wrapped around (the second 4KB BAR space is the same as the first 4KB
+internally). So we can add an 4KB offset (0x1000) to the OHCI registers
+(from the PCI BAR resource) as a quirk.
+
+Cc: stable <stable@kernel.org>
+Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
+Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
+Tested-by: Mingcong Bai <baimingcong@loongson.cn>
+Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
+Link: https://lore.kernel.org/r/20250328040059.3672979-1-chenhuacai@loongson.cn
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/host/ohci-pci.c | 23 +++++++++++++++++++++++
+ 1 file changed, 23 insertions(+)
+
+--- a/drivers/usb/host/ohci-pci.c
++++ b/drivers/usb/host/ohci-pci.c
+@@ -165,6 +165,25 @@ static int ohci_quirk_amd700(struct usb_
+ return 0;
+ }
+
++static int ohci_quirk_loongson(struct usb_hcd *hcd)
++{
++ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
++
++ /*
++ * Loongson's LS7A OHCI controller (rev 0x02) has a
++ * flaw. MMIO register with offset 0x60/64 is treated
++ * as legacy PS2-compatible keyboard/mouse interface.
++ * Since OHCI only use 4KB BAR resource, LS7A OHCI's
++ * 32KB BAR is wrapped around (the 2nd 4KB BAR space
++ * is the same as the 1st 4KB internally). So add 4KB
++ * offset (0x1000) to the OHCI registers as a quirk.
++ */
++ if (pdev->revision == 0x2)
++ hcd->regs += SZ_4K; /* SZ_4K = 0x1000 */
++
++ return 0;
++}
++
+ static int ohci_quirk_qemu(struct usb_hcd *hcd)
+ {
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+@@ -225,6 +244,10 @@ static const struct pci_device_id ohci_p
+ .driver_data = (unsigned long)ohci_quirk_amd700,
+ },
+ {
++ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a24),
++ .driver_data = (unsigned long)ohci_quirk_loongson,
++ },
++ {
+ .vendor = PCI_VENDOR_ID_APPLE,
+ .device = 0x003f,
+ .subvendor = PCI_SUBVENDOR_ID_REDHAT_QUMRANET,
--- /dev/null
+From 37ffdbd695c02189dbf23d6e7d2385e0299587ca Mon Sep 17 00:00:00 2001
+From: Miao Li <limiao@kylinos.cn>
+Date: Mon, 14 Apr 2025 14:29:35 +0800
+Subject: usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive
+
+From: Miao Li <limiao@kylinos.cn>
+
+commit 37ffdbd695c02189dbf23d6e7d2385e0299587ca upstream.
+
+The SanDisk 3.2Gen1 Flash Drive, which VID:PID is in 0781:55a3,
+just like Silicon Motion Flash Drive:
+https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
+also needs the DELAY_INIT quirk, or it will randomly work incorrectly
+(e.g.: lsusb and can't list this device info) when connecting Huawei
+hisi platforms and doing thousand of reboot test circles.
+
+Cc: stable <stable@kernel.org>
+Signed-off-by: Miao Li <limiao@kylinos.cn>
+Signed-off-by: Lei Huang <huanglei@kylinos.cn>
+Link: https://lore.kernel.org/r/20250414062935.159024-1-limiao870622@163.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/quirks.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/core/quirks.c
++++ b/drivers/usb/core/quirks.c
+@@ -366,6 +366,9 @@ static const struct usb_device_id usb_qu
+ { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM },
+ { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM },
+
++ /* SanDisk Corp. SanDisk 3.2Gen1 */
++ { USB_DEVICE(0x0781, 0x55a3), .driver_info = USB_QUIRK_DELAY_INIT },
++
+ /* Realforce 87U Keyboard */
+ { USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM },
+
--- /dev/null
+From 2932b6b547ec36ad2ed60fbf2117c0e46bb7d40a Mon Sep 17 00:00:00 2001
+From: Miao Li <limiao@kylinos.cn>
+Date: Tue, 1 Apr 2025 10:30:27 +0800
+Subject: usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive
+
+From: Miao Li <limiao@kylinos.cn>
+
+commit 2932b6b547ec36ad2ed60fbf2117c0e46bb7d40a upstream.
+
+Silicon Motion Flash Drive connects to Huawei hisi platforms and
+performs a system reboot test for two thousand circles, it will
+randomly work incorrectly on boot, set DELAY_INIT quirk can workaround
+this issue.
+
+Signed-off-by: Miao Li <limiao@kylinos.cn>
+Cc: stable <stable@kernel.org>
+Link: https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/quirks.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/core/quirks.c
++++ b/drivers/usb/core/quirks.c
+@@ -380,6 +380,9 @@ static const struct usb_device_id usb_qu
+ { USB_DEVICE(0x0904, 0x6103), .driver_info =
+ USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
+
++ /* Silicon Motion Flash Drive */
++ { USB_DEVICE(0x090c, 0x1000), .driver_info = USB_QUIRK_DELAY_INIT },
++
+ /* Sound Devices USBPre2 */
+ { USB_DEVICE(0x0926, 0x0202), .driver_info =
+ USB_QUIRK_ENDPOINT_IGNORE },
--- /dev/null
+From b399078f882b6e5d32da18b6c696cc84b12f90d5 Mon Sep 17 00:00:00 2001
+From: Michael Ehrenreich <michideep@gmail.com>
+Date: Mon, 17 Mar 2025 06:17:15 +0100
+Subject: USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe
+
+From: Michael Ehrenreich <michideep@gmail.com>
+
+commit b399078f882b6e5d32da18b6c696cc84b12f90d5 upstream.
+
+Abacus Electrics makes optical probes for interacting with smart meters
+over an optical interface.
+
+At least one version uses an FT232B chip (as detected by ftdi_sio) with
+a custom USB PID, which needs to be added to the list to make the device
+work in a plug-and-play fashion.
+
+Signed-off-by: Michael Ehrenreich <michideep@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/ftdi_sio.c | 2 ++
+ drivers/usb/serial/ftdi_sio_ids.h | 5 +++++
+ 2 files changed, 7 insertions(+)
+
+--- a/drivers/usb/serial/ftdi_sio.c
++++ b/drivers/usb/serial/ftdi_sio.c
+@@ -1071,6 +1071,8 @@ static const struct usb_device_id id_tab
+ { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 2) },
+ { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 3) },
++ /* Abacus Electrics */
++ { USB_DEVICE(FTDI_VID, ABACUS_OPTICAL_PROBE_PID) },
+ { } /* Terminating entry */
+ };
+
+--- a/drivers/usb/serial/ftdi_sio_ids.h
++++ b/drivers/usb/serial/ftdi_sio_ids.h
+@@ -436,6 +436,11 @@
+ #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
+
+ /*
++ * Abacus Electrics
++ */
++#define ABACUS_OPTICAL_PROBE_PID 0xf458 /* ABACUS ELECTRICS Optical Probe */
++
++/*
+ * Oceanic product ids
+ */
+ #define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
--- /dev/null
+From 968e1cbb1f6293c3add9607f80b5ce3d29f57583 Mon Sep 17 00:00:00 2001
+From: Adam Xue <zxue@semtech.com>
+Date: Mon, 14 Apr 2025 14:14:37 -0700
+Subject: USB: serial: option: add Sierra Wireless EM9291
+
+From: Adam Xue <zxue@semtech.com>
+
+commit 968e1cbb1f6293c3add9607f80b5ce3d29f57583 upstream.
+
+Add Sierra Wireless EM9291.
+
+Interface 0: MBIM control
+ 1: MBIM data
+ 3: AT port
+ 4: Diagnostic port
+
+T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
+D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=1199 ProdID=90e3 Rev=00.06
+S: Manufacturer=Sierra Wireless, Incorporated
+S: Product=Sierra Wireless EM9291
+S: SerialNumber=xxxxxxxxxxxxxxxx
+C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
+I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
+E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
+I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
+E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
+I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Adam Xue <zxue@semtech.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -611,6 +611,7 @@ static void option_instat_callback(struc
+ /* Sierra Wireless products */
+ #define SIERRA_VENDOR_ID 0x1199
+ #define SIERRA_PRODUCT_EM9191 0x90d3
++#define SIERRA_PRODUCT_EM9291 0x90e3
+
+ /* UNISOC (Spreadtrum) products */
+ #define UNISOC_VENDOR_ID 0x1782
+@@ -2432,6 +2433,8 @@ static const struct usb_device_id option
+ { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
++ { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x30) },
++ { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */
--- /dev/null
+From 4cc01410e1c1dd075df10f750775c81d1cb6672b Mon Sep 17 00:00:00 2001
+From: Craig Hesling <craig@hesling.com>
+Date: Tue, 8 Apr 2025 16:27:03 -0700
+Subject: USB: serial: simple: add OWON HDS200 series oscilloscope support
+
+From: Craig Hesling <craig@hesling.com>
+
+commit 4cc01410e1c1dd075df10f750775c81d1cb6672b upstream.
+
+Add serial support for OWON HDS200 series oscilloscopes and likely
+many other pieces of OWON test equipment.
+
+OWON HDS200 series devices host two USB endpoints, designed to
+facilitate bidirectional SCPI. SCPI is a predominately ASCII text
+protocol for test/measurement equipment. Having a serial/tty interface
+for these devices lowers the barrier to entry for anyone trying to
+write programs to communicate with them.
+
+The following shows the USB descriptor for the OWON HDS272S running
+firmware V5.7.1:
+
+Bus 001 Device 068: ID 5345:1234 Owon PDS6062T Oscilloscope
+Negotiated speed: Full Speed (12Mbps)
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 0 [unknown]
+ bDeviceSubClass 0 [unknown]
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x5345 Owon
+ idProduct 0x1234 PDS6062T Oscilloscope
+ bcdDevice 1.00
+ iManufacturer 1 oscilloscope
+ iProduct 2 oscilloscope
+ iSerial 3 oscilloscope
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 0x0029
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 5 Physical Interface Device
+ bInterfaceSubClass 0 [unknown]
+ bInterfaceProtocol 0
+ iInterface 0
+ ** UNRECOGNIZED: 09 21 11 01 00 01 22 5f 00
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 32
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 32
+Device Status: 0x0000
+ (Bus Powered)
+
+OWON appears to be using the same USB Vendor and Product ID for many
+of their oscilloscopes. Looking at the discussion about the USB
+vendor/product ID, in the link bellow, suggests that this VID/PID is
+shared with VDS, SDS, PDS, and now the HDS series oscilloscopes.
+Available documentation for these devices seems to indicate that all
+use a similar SCPI protocol, some with RS232 options. It is likely that
+this same simple serial setup would work correctly for them all.
+
+Link: https://usb-ids.gowdy.us/read/UD/5345/1234
+Signed-off-by: Craig Hesling <craig@hesling.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/usb-serial-simple.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/usb/serial/usb-serial-simple.c
++++ b/drivers/usb/serial/usb-serial-simple.c
+@@ -101,6 +101,11 @@ DEVICE(nokia, NOKIA_IDS);
+ { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */
+ DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
+
++/* OWON electronic test and measurement equipment driver */
++#define OWON_IDS() \
++ { USB_DEVICE(0x5345, 0x1234) } /* HDS200 oscilloscopes and others */
++DEVICE(owon, OWON_IDS);
++
+ /* Siemens USB/MPI adapter */
+ #define SIEMENS_IDS() \
+ { USB_DEVICE(0x908, 0x0004) }
+@@ -135,6 +140,7 @@ static struct usb_serial_driver * const
+ &motorola_tetra_device,
+ &nokia_device,
+ &novatel_gps_device,
++ &owon_device,
+ &siemens_mpi_device,
+ &suunto_device,
+ &vivopay_device,
+@@ -154,6 +160,7 @@ static const struct usb_device_id id_tab
+ MOTOROLA_TETRA_IDS(),
+ NOKIA_IDS(),
+ NOVATEL_IDS(),
++ OWON_IDS(),
+ SIEMENS_IDS(),
+ SUUNTO_IDS(),
+ VIVOPAY_IDS(),
--- /dev/null
+From e00b39a4f3552c730f1e24c8d62c4a8c6aad4e5d Mon Sep 17 00:00:00 2001
+From: Oliver Neukum <oneukum@suse.com>
+Date: Tue, 8 Apr 2025 15:57:46 +0200
+Subject: USB: VLI disk crashes if LPM is used
+
+From: Oliver Neukum <oneukum@suse.com>
+
+commit e00b39a4f3552c730f1e24c8d62c4a8c6aad4e5d upstream.
+
+This device needs the NO_LPM quirk.
+
+Cc: stable <stable@kernel.org>
+Signed-off-by: Oliver Neukum <oneukum@suse.com>
+Link: https://lore.kernel.org/r/20250408135800.792515-1-oneukum@suse.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/quirks.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/core/quirks.c
++++ b/drivers/usb/core/quirks.c
+@@ -539,6 +539,9 @@ static const struct usb_device_id usb_qu
+ { USB_DEVICE(0x2040, 0x7200), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
++ /* VLI disk */
++ { USB_DEVICE(0x2109, 0x0711), .driver_info = USB_QUIRK_NO_LPM },
++
+ /* Raydium Touchscreen */
+ { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM },
+
--- /dev/null
+From 73e9cc1ffd3650b12c4eb059dfdafd56e725ceda Mon Sep 17 00:00:00 2001
+From: Oliver Neukum <oneukum@suse.com>
+Date: Tue, 1 Apr 2025 10:45:41 +0200
+Subject: USB: wdm: add annotation
+
+From: Oliver Neukum <oneukum@suse.com>
+
+commit 73e9cc1ffd3650b12c4eb059dfdafd56e725ceda upstream.
+
+This is not understandable without a comment on endianness
+
+Fixes: afba937e540c9 ("USB: CDC WDM driver")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Oliver Neukum <oneukum@suse.com>
+Link: https://lore.kernel.org/r/20250401084749.175246-5-oneukum@suse.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/class/cdc-wdm.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/usb/class/cdc-wdm.c
++++ b/drivers/usb/class/cdc-wdm.c
+@@ -909,7 +909,7 @@ static int wdm_wwan_port_tx(struct wwan_
+ req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+ req->wValue = 0;
+- req->wIndex = desc->inum;
++ req->wIndex = desc->inum; /* already converted */
+ req->wLength = cpu_to_le16(skb->len);
+
+ skb_shinfo(skb)->destructor_arg = desc;
--- /dev/null
+From c1846ed4eb527bdfe6b3b7dd2c78e2af4bf98f4f Mon Sep 17 00:00:00 2001
+From: Oliver Neukum <oneukum@suse.com>
+Date: Tue, 1 Apr 2025 10:45:39 +0200
+Subject: USB: wdm: close race between wdm_open and wdm_wwan_port_stop
+
+From: Oliver Neukum <oneukum@suse.com>
+
+commit c1846ed4eb527bdfe6b3b7dd2c78e2af4bf98f4f upstream.
+
+Clearing WDM_WWAN_IN_USE must be the last action or
+we can open a chardev whose URBs are still poisoned
+
+Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Oliver Neukum <oneukum@suse.com>
+Link: https://lore.kernel.org/r/20250401084749.175246-3-oneukum@suse.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/class/cdc-wdm.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/class/cdc-wdm.c
++++ b/drivers/usb/class/cdc-wdm.c
+@@ -726,7 +726,7 @@ static int wdm_open(struct inode *inode,
+ rv = -EBUSY;
+ goto out;
+ }
+-
++ smp_rmb(); /* ordered against wdm_wwan_port_stop() */
+ rv = usb_autopm_get_interface(desc->intf);
+ if (rv < 0) {
+ dev_err(&desc->intf->dev, "Error autopm - %d\n", rv);
+@@ -868,8 +868,10 @@ static void wdm_wwan_port_stop(struct ww
+ poison_urbs(desc);
+ desc->manage_power(desc->intf, 0);
+ clear_bit(WDM_READ, &desc->flags);
+- clear_bit(WDM_WWAN_IN_USE, &desc->flags);
+ unpoison_urbs(desc);
++ smp_wmb(); /* ordered against wdm_open() */
++ /* this must be last lest we open a poisoned device */
++ clear_bit(WDM_WWAN_IN_USE, &desc->flags);
+ }
+
+ static void wdm_wwan_port_tx_complete(struct urb *urb)
--- /dev/null
+From 9697f5efcf5fdea65b8390b5eb81bebe746ceedc Mon Sep 17 00:00:00 2001
+From: Oliver Neukum <oneukum@suse.com>
+Date: Tue, 1 Apr 2025 10:45:38 +0200
+Subject: USB: wdm: handle IO errors in wdm_wwan_port_start
+
+From: Oliver Neukum <oneukum@suse.com>
+
+commit 9697f5efcf5fdea65b8390b5eb81bebe746ceedc upstream.
+
+In case submitting the URB fails we must undo
+what we've done so far.
+
+Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Oliver Neukum <oneukum@suse.com>
+Link: https://lore.kernel.org/r/20250401084749.175246-2-oneukum@suse.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/class/cdc-wdm.c | 11 ++++++++++-
+ 1 file changed, 10 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/class/cdc-wdm.c
++++ b/drivers/usb/class/cdc-wdm.c
+@@ -829,6 +829,7 @@ static struct usb_class_driver wdm_class
+ static int wdm_wwan_port_start(struct wwan_port *port)
+ {
+ struct wdm_device *desc = wwan_port_get_drvdata(port);
++ int rv;
+
+ /* The interface is both exposed via the WWAN framework and as a
+ * legacy usbmisc chardev. If chardev is already open, just fail
+@@ -848,7 +849,15 @@ static int wdm_wwan_port_start(struct ww
+ wwan_port_txon(port);
+
+ /* Start getting events */
+- return usb_submit_urb(desc->validity, GFP_KERNEL);
++ rv = usb_submit_urb(desc->validity, GFP_KERNEL);
++ if (rv < 0) {
++ wwan_port_txoff(port);
++ desc->manage_power(desc->intf, 0);
++ /* this must be last lest we race with chardev open */
++ clear_bit(WDM_WWAN_IN_USE, &desc->flags);
++ }
++
++ return rv;
+ }
+
+ static void wdm_wwan_port_stop(struct wwan_port *port)
--- /dev/null
+From 1fdc4dca350c0b8ada0b8ebf212504e1ad55e511 Mon Sep 17 00:00:00 2001
+From: Oliver Neukum <oneukum@suse.com>
+Date: Tue, 1 Apr 2025 10:45:40 +0200
+Subject: USB: wdm: wdm_wwan_port_tx_complete mutex in atomic context
+
+From: Oliver Neukum <oneukum@suse.com>
+
+commit 1fdc4dca350c0b8ada0b8ebf212504e1ad55e511 upstream.
+
+wdm_wwan_port_tx_complete is called from a completion
+handler with irqs disabled and possible in IRQ context
+usb_autopm_put_interface can take a mutex.
+Hence usb_autopm_put_interface_async must be used.
+
+Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Oliver Neukum <oneukum@suse.com>
+Link: https://lore.kernel.org/r/20250401084749.175246-4-oneukum@suse.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/class/cdc-wdm.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/usb/class/cdc-wdm.c
++++ b/drivers/usb/class/cdc-wdm.c
+@@ -879,7 +879,7 @@ static void wdm_wwan_port_tx_complete(st
+ struct sk_buff *skb = urb->context;
+ struct wdm_device *desc = skb_shinfo(skb)->destructor_arg;
+
+- usb_autopm_put_interface(desc->intf);
++ usb_autopm_put_interface_async(desc->intf);
+ wwan_port_txon(desc->wwanp);
+ kfree_skb(skb);
+ }
projects / thirdparty / kernel / stable-queue.git / commitdiff
