--- /dev/null
+From 777967e7e9f6f5f3e153abffb562bffaf4430d26 Mon Sep 17 00:00:00 2001
+From: Coly Li <colyli@suse.de>
+Date: Mon, 20 Nov 2023 13:24:55 +0800
+Subject: bcache: check return value from btree_node_alloc_replacement()
+
+From: Coly Li <colyli@suse.de>
+
+commit 777967e7e9f6f5f3e153abffb562bffaf4430d26 upstream.
+
+In btree_gc_rewrite_node(), pointer 'n' is not checked after it returns
+from btree_gc_rewrite_node(). There is potential possibility that 'n' is
+a non NULL ERR_PTR(), referencing such error code is not permitted in
+following code. Therefore a return value checking is necessary after 'n'
+is back from btree_node_alloc_replacement().
+
+Signed-off-by: Coly Li <colyli@suse.de>
+Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
+Cc: <stable@vger.kernel.org>
+Link: https://lore.kernel.org/r/20231120052503.6122-3-colyli@suse.de
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/md/bcache/btree.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/md/bcache/btree.c
++++ b/drivers/md/bcache/btree.c
+@@ -1506,6 +1506,8 @@ static int btree_gc_rewrite_node(struct
+ return 0;
+
+ n = btree_node_alloc_replacement(replace, NULL);
++ if (IS_ERR(n))
++ return 0;
+
+ /* recheck reserve after allocating replacement node */
+ if (btree_check_reserve(b, NULL)) {
--- /dev/null
+From 7cc47e64d3d69786a2711a4767e26b26ba63d7ed Mon Sep 17 00:00:00 2001
+From: Mingzhe Zou <mingzhe.zou@easystack.cn>
+Date: Mon, 20 Nov 2023 13:24:58 +0800
+Subject: bcache: fixup init dirty data errors
+
+From: Mingzhe Zou <mingzhe.zou@easystack.cn>
+
+commit 7cc47e64d3d69786a2711a4767e26b26ba63d7ed upstream.
+
+We found that after long run, the dirty_data of the bcache device
+will have errors. This error cannot be eliminated unless re-register.
+
+We also found that reattach after detach, this error can accumulate.
+
+In bch_sectors_dirty_init(), all inode <= d->id keys will be recounted
+again. This is wrong, we only need to count the keys of the current
+device.
+
+Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
+Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Coly Li <colyli@suse.de>
+Link: https://lore.kernel.org/r/20231120052503.6122-6-colyli@suse.de
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/md/bcache/writeback.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/md/bcache/writeback.c
++++ b/drivers/md/bcache/writeback.c
+@@ -935,8 +935,11 @@ void bch_sectors_dirty_init(struct bcach
+ op.count = 0;
+
+ for_each_key_filter(&c->root->keys,
+- k, &iter, bch_ptr_invalid)
++ k, &iter, bch_ptr_invalid) {
++ if (KEY_INODE(k) != op.inode)
++ continue;
+ sectors_dirty_init_fn(&op.op, c->root, k);
++ }
+
+ rw_unlock(0, c->root);
+ return;
--- /dev/null
+From e34820f984512b433ee1fc291417e60c47d56727 Mon Sep 17 00:00:00 2001
+From: Mingzhe Zou <mingzhe.zou@easystack.cn>
+Date: Mon, 20 Nov 2023 13:24:59 +0800
+Subject: bcache: fixup lock c->root error
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Mingzhe Zou <mingzhe.zou@easystack.cn>
+
+commit e34820f984512b433ee1fc291417e60c47d56727 upstream.
+
+We had a problem with io hung because it was waiting for c->root to
+release the lock.
+
+crash> cache_set.root -l cache_set.list ffffa03fde4c0050
+ root = 0xffff802ef454c800
+crash> btree -o 0xffff802ef454c800 | grep rw_semaphore
+ [ffff802ef454c858] struct rw_semaphore lock;
+crash> struct rw_semaphore ffff802ef454c858
+struct rw_semaphore {
+ count = {
+ counter = -4294967297
+ },
+ wait_list = {
+ next = 0xffff00006786fc28,
+ prev = 0xffff00005d0efac8
+ },
+ wait_lock = {
+ raw_lock = {
+ {
+ val = {
+ counter = 0
+ },
+ {
+ locked = 0 '\000',
+ pending = 0 '\000'
+ },
+ {
+ locked_pending = 0,
+ tail = 0
+ }
+ }
+ }
+ },
+ osq = {
+ tail = {
+ counter = 0
+ }
+ },
+ owner = 0xffffa03fdc586603
+}
+
+The "counter = -4294967297" means that lock count is -1 and a write lock
+is being attempted. Then, we found that there is a btree with a counter
+of 1 in btree_cache_freeable.
+
+crash> cache_set -l cache_set.list ffffa03fde4c0050 -o|grep btree_cache
+ [ffffa03fde4c1140] struct list_head btree_cache;
+ [ffffa03fde4c1150] struct list_head btree_cache_freeable;
+ [ffffa03fde4c1160] struct list_head btree_cache_freed;
+ [ffffa03fde4c1170] unsigned int btree_cache_used;
+ [ffffa03fde4c1178] wait_queue_head_t btree_cache_wait;
+ [ffffa03fde4c1190] struct task_struct *btree_cache_alloc_lock;
+crash> list -H ffffa03fde4c1140|wc -l
+973
+crash> list -H ffffa03fde4c1150|wc -l
+1123
+crash> cache_set.btree_cache_used -l cache_set.list ffffa03fde4c0050
+ btree_cache_used = 2097
+crash> list -s btree -l btree.list -H ffffa03fde4c1140|grep -E -A2 "^ lock = {" > btree_cache.txt
+crash> list -s btree -l btree.list -H ffffa03fde4c1150|grep -E -A2 "^ lock = {" > btree_cache_freeable.txt
+[root@node-3 127.0.0.1-2023-08-04-16:40:28]# pwd
+/var/crash/127.0.0.1-2023-08-04-16:40:28
+[root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache.txt|grep counter|grep -v "counter = 0"
+[root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache_freeable.txt|grep counter|grep -v "counter = 0"
+ counter = 1
+
+We found that this is a bug in bch_sectors_dirty_init() when locking c->root:
+ (1). Thread X has locked c->root(A) write.
+ (2). Thread Y failed to lock c->root(A), waiting for the lock(c->root A).
+ (3). Thread X bch_btree_set_root() changes c->root from A to B.
+ (4). Thread X releases the lock(c->root A).
+ (5). Thread Y successfully locks c->root(A).
+ (6). Thread Y releases the lock(c->root B).
+
+ down_write locked ---(1)----------------------┐
+ | |
+ | down_read waiting ---(2)----┐ |
+ | | ┌-------------┐ ┌-------------┐
+ bch_btree_set_root ===(3)========>> | c->root A | | c->root B |
+ | | └-------------┘ └-------------┘
+ up_write ---(4)---------------------┘ | |
+ | | |
+ down_read locked ---(5)-----------┘ |
+ | |
+ up_read ---(6)-----------------------------┘
+
+Since c->root may change, the correct steps to lock c->root should be
+the same as bch_root_usage(), compare after locking.
+
+static unsigned int bch_root_usage(struct cache_set *c)
+{
+ unsigned int bytes = 0;
+ struct bkey *k;
+ struct btree *b;
+ struct btree_iter iter;
+
+ goto lock_root;
+
+ do {
+ rw_unlock(false, b);
+lock_root:
+ b = c->root;
+ rw_lock(false, b, b->level);
+ } while (b != c->root);
+
+ for_each_key_filter(&b->keys, k, &iter, bch_ptr_bad)
+ bytes += bkey_bytes(k);
+
+ rw_unlock(false, b);
+
+ return (bytes * 100) / btree_bytes(c);
+}
+
+Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
+Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Coly Li <colyli@suse.de>
+Link: https://lore.kernel.org/r/20231120052503.6122-7-colyli@suse.de
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/md/bcache/writeback.c | 14 +++++++++++---
+ 1 file changed, 11 insertions(+), 3 deletions(-)
+
+--- a/drivers/md/bcache/writeback.c
++++ b/drivers/md/bcache/writeback.c
+@@ -921,14 +921,22 @@ static int bch_btre_dirty_init_thread_nr
+ void bch_sectors_dirty_init(struct bcache_device *d)
+ {
+ int i;
++ struct btree *b = NULL;
+ struct bkey *k = NULL;
+ struct btree_iter iter;
+ struct sectors_dirty_init op;
+ struct cache_set *c = d->c;
+ struct bch_dirty_init_state state;
+
++retry_lock:
++ b = c->root;
++ rw_lock(0, b, b->level);
++ if (b != c->root) {
++ rw_unlock(0, b);
++ goto retry_lock;
++ }
++
+ /* Just count root keys if no leaf node */
+- rw_lock(0, c->root, c->root->level);
+ if (c->root->level == 0) {
+ bch_btree_op_init(&op.op, -1);
+ op.inode = d->id;
+@@ -941,7 +949,7 @@ void bch_sectors_dirty_init(struct bcach
+ sectors_dirty_init_fn(&op.op, c->root, k);
+ }
+
+- rw_unlock(0, c->root);
++ rw_unlock(0, b);
+ return;
+ }
+
+@@ -978,7 +986,7 @@ void bch_sectors_dirty_init(struct bcach
+ out:
+ /* Must wait for all threads to stop. */
+ wait_event(state.wait, atomic_read(&state.started) == 0);
+- rw_unlock(0, c->root);
++ rw_unlock(0, b);
+ }
+
+ void bch_cached_dev_writeback_init(struct cached_dev *dc)
--- /dev/null
+From 2c7f497ac274a14330208b18f6f734000868ebf9 Mon Sep 17 00:00:00 2001
+From: Rand Deeb <rand.sec96@gmail.com>
+Date: Mon, 20 Nov 2023 13:24:57 +0800
+Subject: bcache: prevent potential division by zero error
+
+From: Rand Deeb <rand.sec96@gmail.com>
+
+commit 2c7f497ac274a14330208b18f6f734000868ebf9 upstream.
+
+In SHOW(), the variable 'n' is of type 'size_t.' While there is a
+conditional check to verify that 'n' is not equal to zero before
+executing the 'do_div' macro, concerns arise regarding potential
+division by zero error in 64-bit environments.
+
+The concern arises when 'n' is 64 bits in size, greater than zero, and
+the lower 32 bits of it are zeros. In such cases, the conditional check
+passes because 'n' is non-zero, but the 'do_div' macro casts 'n' to
+'uint32_t,' effectively truncating it to its lower 32 bits.
+Consequently, the 'n' value becomes zero.
+
+To fix this potential division by zero error and ensure precise
+division handling, this commit replaces the 'do_div' macro with
+div64_u64(). div64_u64() is designed to work with 64-bit operands,
+guaranteeing that division is performed correctly.
+
+This change enhances the robustness of the code, ensuring that division
+operations yield accurate results in all scenarios, eliminating the
+possibility of division by zero, and improving compatibility across
+different 64-bit environments.
+
+Found by Linux Verification Center (linuxtesting.org) with SVACE.
+
+Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Coly Li <colyli@suse.de>
+Link: https://lore.kernel.org/r/20231120052503.6122-5-colyli@suse.de
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/md/bcache/sysfs.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/md/bcache/sysfs.c
++++ b/drivers/md/bcache/sysfs.c
+@@ -1078,7 +1078,7 @@ SHOW(__bch_cache)
+ sum += INITIAL_PRIO - cached[i];
+
+ if (n)
+- do_div(sum, n);
++ sum = div64_u64(sum, n);
+
+ for (i = 0; i < ARRAY_SIZE(q); i++)
+ q[i] = INITIAL_PRIO - cached[n * (i + 1) /
hv_netvsc-fix-race-of-register_netdevice_notifier-and-vf-register.patch
hv_netvsc-mark-vf-as-slave-before-exposing-it-to-user-mode.patch
dm-delay-fix-a-race-between-delay_presuspend-and-del.patch
+bcache-check-return-value-from-btree_node_alloc_replacement.patch
+bcache-prevent-potential-division-by-zero-error.patch
+bcache-fixup-init-dirty-data-errors.patch
+bcache-fixup-lock-c-root-error.patch
+usb-serial-option-add-fibocom-l7xx-modules.patch
+usb-serial-option-fix-fm101r-gl-defines.patch
+usb-serial-option-don-t-claim-interface-4-for-zte-mf290.patch
+usb-dwc2-write-hcint-with-intmask-applied.patch
+usb-dwc3-fix-default-mode-initialization.patch
+usb-dwc3-set-the-dma-max_seg_size.patch
+usb-dwc3-qcom-fix-wakeup-after-probe-deferral.patch
--- /dev/null
+From 0583bc776ca5b5a3f5752869fc31cf7322df2b35 Mon Sep 17 00:00:00 2001
+From: Oliver Neukum <oneukum@suse.com>
+Date: Wed, 15 Nov 2023 15:45:07 +0100
+Subject: USB: dwc2: write HCINT with INTMASK applied
+
+From: Oliver Neukum <oneukum@suse.com>
+
+commit 0583bc776ca5b5a3f5752869fc31cf7322df2b35 upstream.
+
+dwc2_hc_n_intr() writes back INTMASK as read but evaluates it
+with intmask applied. In stress testing this causes spurious
+interrupts like this:
+
+[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown
+[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
+[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown
+[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
+[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown
+[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
+[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length
+
+Applying INTMASK prevents this. The issue exists in all versions of the
+driver.
+
+Signed-off-by: Oliver Neukum <oneukum@suse.com>
+Tested-by: Ivan Ivanov <ivan.ivanov@suse.com>
+Tested-by: Andrea della Porta <andrea.porta@suse.com>
+Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com
+Cc: stable <stable@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc2/hcd_intr.c | 15 +++++++--------
+ 1 file changed, 7 insertions(+), 8 deletions(-)
+
+--- a/drivers/usb/dwc2/hcd_intr.c
++++ b/drivers/usb/dwc2/hcd_intr.c
+@@ -2045,15 +2045,17 @@ static void dwc2_hc_n_intr(struct dwc2_h
+ {
+ struct dwc2_qtd *qtd;
+ struct dwc2_host_chan *chan;
+- u32 hcint, hcintmsk;
++ u32 hcint, hcintraw, hcintmsk;
+
+ chan = hsotg->hc_ptr_array[chnum];
+
+- hcint = dwc2_readl(hsotg, HCINT(chnum));
++ hcintraw = dwc2_readl(hsotg, HCINT(chnum));
+ hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum));
++ hcint = hcintraw & hcintmsk;
++ dwc2_writel(hsotg, hcint, HCINT(chnum));
++
+ if (!chan) {
+ dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
+- dwc2_writel(hsotg, hcint, HCINT(chnum));
+ return;
+ }
+
+@@ -2062,11 +2064,9 @@ static void dwc2_hc_n_intr(struct dwc2_h
+ chnum);
+ dev_vdbg(hsotg->dev,
+ " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
+- hcint, hcintmsk, hcint & hcintmsk);
++ hcintraw, hcintmsk, hcint);
+ }
+
+- dwc2_writel(hsotg, hcint, HCINT(chnum));
+-
+ /*
+ * If we got an interrupt after someone called
+ * dwc2_hcd_endpoint_disable() we don't want to crash below
+@@ -2076,8 +2076,7 @@ static void dwc2_hc_n_intr(struct dwc2_h
+ return;
+ }
+
+- chan->hcint = hcint;
+- hcint &= hcintmsk;
++ chan->hcint = hcintraw;
+
+ /*
+ * If the channel was halted due to a dequeue, the qtd list might
--- /dev/null
+From 10d510abd096d620b9fda2dd3e0047c5efc4ad2b Mon Sep 17 00:00:00 2001
+From: Alexander Stein <alexander.stein@ew.tq-group.com>
+Date: Wed, 25 Oct 2023 11:51:10 +0200
+Subject: usb: dwc3: Fix default mode initialization
+
+From: Alexander Stein <alexander.stein@ew.tq-group.com>
+
+commit 10d510abd096d620b9fda2dd3e0047c5efc4ad2b upstream.
+
+The default mode, configurable by DT, shall be set before usb role switch
+driver is registered. Otherwise there is a race between default mode
+and mode set by usb role switch driver.
+
+Fixes: 98ed256a4dbad ("usb: dwc3: Add support for role-switch-default-mode binding")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
+Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/20231025095110.2405281-1-alexander.stein@ew.tq-group.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc3/drd.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/usb/dwc3/drd.c
++++ b/drivers/usb/dwc3/drd.c
+@@ -547,6 +547,7 @@ static int dwc3_setup_role_switch(struct
+ dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+ mode = DWC3_GCTL_PRTCAP_DEVICE;
+ }
++ dwc3_set_mode(dwc, mode);
+
+ dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+ dwc3_role_switch.set = dwc3_usb_role_switch_set;
+@@ -556,7 +557,6 @@ static int dwc3_setup_role_switch(struct
+ if (IS_ERR(dwc->role_sw))
+ return PTR_ERR(dwc->role_sw);
+
+- dwc3_set_mode(dwc, mode);
+ return 0;
+ }
+ #else
--- /dev/null
+From 41f5a0973259db9e4e3c9963d36505f80107d1a0 Mon Sep 17 00:00:00 2001
+From: Johan Hovold <johan+linaro@kernel.org>
+Date: Mon, 20 Nov 2023 17:16:06 +0100
+Subject: USB: dwc3: qcom: fix wakeup after probe deferral
+
+From: Johan Hovold <johan+linaro@kernel.org>
+
+commit 41f5a0973259db9e4e3c9963d36505f80107d1a0 upstream.
+
+The Qualcomm glue driver is overriding the interrupt trigger types
+defined by firmware when requesting the wakeup interrupts during probe.
+
+This can lead to a failure to map the DP/DM wakeup interrupts after a
+probe deferral as the firmware defined trigger types do not match the
+type used for the initial mapping:
+
+ irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
+ irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000!
+
+Fix this by not overriding the firmware provided trigger types when
+requesting the wakeup interrupts.
+
+Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
+Cc: stable@vger.kernel.org # 4.18
+Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
+Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
+Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc3/dwc3-qcom.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/usb/dwc3/dwc3-qcom.c
++++ b/drivers/usb/dwc3/dwc3-qcom.c
+@@ -492,7 +492,7 @@ static int dwc3_qcom_setup_irq(struct pl
+ irq_set_status_flags(irq, IRQ_NOAUTOEN);
+ ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+ qcom_dwc3_resume_irq,
+- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
++ IRQF_ONESHOT,
+ "qcom_dwc3 HS", qcom);
+ if (ret) {
+ dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
+@@ -507,7 +507,7 @@ static int dwc3_qcom_setup_irq(struct pl
+ irq_set_status_flags(irq, IRQ_NOAUTOEN);
+ ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+ qcom_dwc3_resume_irq,
+- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
++ IRQF_ONESHOT,
+ "qcom_dwc3 DP_HS", qcom);
+ if (ret) {
+ dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
+@@ -522,7 +522,7 @@ static int dwc3_qcom_setup_irq(struct pl
+ irq_set_status_flags(irq, IRQ_NOAUTOEN);
+ ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+ qcom_dwc3_resume_irq,
+- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
++ IRQF_ONESHOT,
+ "qcom_dwc3 DM_HS", qcom);
+ if (ret) {
+ dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
+@@ -537,7 +537,7 @@ static int dwc3_qcom_setup_irq(struct pl
+ irq_set_status_flags(irq, IRQ_NOAUTOEN);
+ ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+ qcom_dwc3_resume_irq,
+- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
++ IRQF_ONESHOT,
+ "qcom_dwc3 SS", qcom);
+ if (ret) {
+ dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
--- /dev/null
+From 8bbae288a85abed6a1cf7d185d8b9dc2f5dcb12c Mon Sep 17 00:00:00 2001
+From: Ricardo Ribalda <ribalda@chromium.org>
+Date: Fri, 27 Oct 2023 11:28:20 +0000
+Subject: usb: dwc3: set the dma max_seg_size
+
+From: Ricardo Ribalda <ribalda@chromium.org>
+
+commit 8bbae288a85abed6a1cf7d185d8b9dc2f5dcb12c upstream.
+
+Allow devices to have dma operations beyond 4K, and avoid warnings such
+as:
+
+DMA-API: dwc3 a600000.usb: mapping sg segment longer than device claims to support [len=86016] [max=65536]
+
+Cc: stable@vger.kernel.org
+Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
+Reported-by: Zubin Mithra <zsm@chromium.org>
+Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
+Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/20231026-dwc3-v2-1-1d4fd5c3e067@chromium.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc3/core.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -1627,6 +1627,8 @@ static int dwc3_probe(struct platform_de
+
+ pm_runtime_put(dev);
+
++ dma_set_max_seg_size(dev, UINT_MAX);
++
+ return 0;
+
+ err5:
--- /dev/null
+From e389fe8b68137344562fb6e4d53d8a89ef6212dd Mon Sep 17 00:00:00 2001
+From: Victor Fragoso <victorffs@hotmail.com>
+Date: Tue, 21 Nov 2023 21:05:56 +0000
+Subject: USB: serial: option: add Fibocom L7xx modules
+
+From: Victor Fragoso <victorffs@hotmail.com>
+
+commit e389fe8b68137344562fb6e4d53d8a89ef6212dd upstream.
+
+Add support for Fibocom L716-EU module series.
+
+L716-EU is a Fibocom module based on ZTE's V3E/V3T chipset.
+
+Device creates multiple interfaces when connected to PC as follows:
+ - Network Interface: ECM or RNDIS (set by FW or AT Command)
+ - ttyUSB0: AT port
+ - ttyUSB1: Modem port
+ - ttyUSB2: AT2 port
+ - ttyUSB3: Trace port for log information
+ - ADB: ADB port for debugging. ("Driver=usbfs" when ADB server enabled)
+
+Here are the outputs of lsusb and usb-devices:
+$ ls /dev/ttyUSB*
+/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3
+
+usb-devices:
+L716-EU (ECM mode):
+T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 51 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=2cb7 ProdID=0001 Rev= 1.00
+S: Manufacturer=Fibocom,Incorporated
+S: Product=Fibocom Mobile Boardband
+S: SerialNumber=1234567890ABCDEF
+C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
+A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
+I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
+E: Ad=87(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
+I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+L716-EU (RNDIS mode):
+T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 49 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=2cb7 ProdID=0001 Rev= 1.00
+S: Manufacturer=Fibocom,Incorporated
+S: Product=Fibocom Mobile Boardband
+S: SerialNumber=1234567890ABCDEF
+C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
+A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
+I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
+E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Victor Fragoso <victorffs@hotmail.com>
+Reviewed-by: Lars Melin <larsm17@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -2251,6 +2251,7 @@ static const struct usb_device_id option
+ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+ { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */
++ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0001, 0xff, 0xff, 0xff) }, /* Fibocom L716-EU (ECM/RNDIS mode) */
+ { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
+ .driver_info = RSVD(4) | RSVD(5) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
--- /dev/null
+From 8771127e25d6c20d458ad27cf32f7fcfc1755e05 Mon Sep 17 00:00:00 2001
+From: Lech Perczak <lech.perczak@gmail.com>
+Date: Sat, 18 Nov 2023 00:19:17 +0100
+Subject: USB: serial: option: don't claim interface 4 for ZTE MF290
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Lech Perczak <lech.perczak@gmail.com>
+
+commit 8771127e25d6c20d458ad27cf32f7fcfc1755e05 upstream.
+
+Interface 4 is used by for QMI interface in stock firmware of MF28D, the
+router which uses MF290 modem. Free the interface up, to rebind it to
+qmi_wwan driver.
+The proper configuration is:
+
+Interface mapping is:
+0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
+
+T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=19d2 ProdID=0189 Rev= 0.00
+S: Manufacturer=ZTE, Incorporated
+S: Product=ZTE LTE Technologies MSM
+C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
+I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
+I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
+I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
+E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
+
+Cc: Bjørn Mork <bjorn@mork.no>
+Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -1548,7 +1548,8 @@ static const struct usb_device_id option
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
+ .driver_info = RSVD(4) },
+- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
++ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff),
++ .driver_info = RSVD(4) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
+ .driver_info = RSVD(4) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
--- /dev/null
+From a1092619dd28ac0fcf23016160a2fdccd98ef935 Mon Sep 17 00:00:00 2001
+From: Puliang Lu <puliang.lu@fibocom.com>
+Date: Thu, 26 Oct 2023 20:35:06 +0800
+Subject: USB: serial: option: fix FM101R-GL defines
+
+From: Puliang Lu <puliang.lu@fibocom.com>
+
+commit a1092619dd28ac0fcf23016160a2fdccd98ef935 upstream.
+
+Modify the definition of the two Fibocom FM101R-GL PID macros, which had
+their PIDs switched.
+
+The correct PIDs are:
+
+- VID:PID 413C:8213, FM101R-GL ESIM are laptop M.2 cards (with
+ MBIM interfaces for Linux)
+
+- VID:PID 413C:8215, FM101R-GL are laptop M.2 cards (with
+ MBIM interface for Linux)
+
+0x8213: mbim, tty
+0x8215: mbim, tty
+
+Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
+Fixes: 52480e1f1a25 ("USB: serial: option: add Fibocom to DELL custom modem FM101R-GL")
+Link: https://lore.kernel.org/lkml/TYZPR02MB508845BAD7936A62A105CE5D89DFA@TYZPR02MB5088.apcprd02.prod.outlook.com/
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -203,8 +203,8 @@ static void option_instat_callback(struc
+ #define DELL_PRODUCT_5829E_ESIM 0x81e4
+ #define DELL_PRODUCT_5829E 0x81e6
+
+-#define DELL_PRODUCT_FM101R 0x8213
+-#define DELL_PRODUCT_FM101R_ESIM 0x8215
++#define DELL_PRODUCT_FM101R_ESIM 0x8213
++#define DELL_PRODUCT_FM101R 0x8215
+
+ #define KYOCERA_VENDOR_ID 0x0c88
+ #define KYOCERA_PRODUCT_KPC650 0x17da
projects / thirdparty / kernel / stable-queue.git / commitdiff
