arm64: zynqmp: Remove additional comments from dts files

Remove additional comments which were removed as the part of upstreaming.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 191e2fc82d93b2b5785a8399a40c40390b62240c..8024cd1c6e9d1d2a746735133f02661411bdd6c5 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -43,7 +43,6 @@
        };
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index b92acd067502a8d7d613af12c87be9183c844945..b9a4b03341bd4e1219972f68643af5304e4108f1 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -56,7 +56,6 @@
        pinctrl-0 = <&pinctrl_can1_default>;
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index 05a805616009927d0bb09a7b5087c608f9942c69..189a94c5d881306334e27af6962f412641b39fe3 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -41,7 +41,6 @@
        };
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
index a374f89b3d26c1b2e579b0a6ad62f86e1266b03d..1001110784c207ab8d9412bf74ba9ab25bef3d18 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -52,7 +52,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index 7d9d1af57b62e0939dbc6f31eae58fc18f4068c0..a32bf059c91fc762356b2b8c231e6f8de8e9f25e 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -41,7 +41,6 @@
        };
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };
@@ -89,7 +88,6 @@
        status = "okay";
 };
 
-/* FIXME: Add device */
 &i2c0 {
        status = "okay";
        pinctrl-names = "default", "gpio";
@@ -99,7 +97,6 @@
        sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
 };
 
-/* FIXME: Add device */
 &i2c1 {
        status = "okay";
        pinctrl-names = "default", "gpio";

diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index afe47bf4f0a44fc51601b8def50e963134e29b96..5d3ec229c37b515928fbf24afc0e4bf0b825b169 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -56,7 +56,7 @@
                        label = "sw4";
                        gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
                        linux,code = <108>; /* down */
-                       gpio-key,wakeup; /* FIXME test this */
+                       gpio-key,wakeup;
                        autorepeat;
                };
        };
@@ -98,7 +98,6 @@
                        linux,default-trigger = "bluetooth-power";
                };
 
-               /* FIXME this is not correct - used fixed-regulator for it */
                vbus_det { /* U5 USB5744  VBUS detection via MIO25 */
                        label = "vbus_det";
                        gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
@@ -107,10 +106,6 @@
        };
 
        ltc2954: ltc2954 { /* U7 */
-               /*
-                * FIXME this is ltc2954 not ltc2952 - try this driver and
-                * maybe just extend compatible string.
-                */
                compatible = "lltc,ltc2954", "lltc,ltc2952";
                trigger-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; /* INT line - input */
                /* If there is HW watchdog on mezzanine this signal should be connected there */
@@ -222,9 +217,6 @@
                        #size-cells = <0>;
                        reg = <0x4>;
 
-                       /* Comment it out because will be pre-programmed
-                          at the factory */
-
                        pmic: tps65086x@5e { // Custom TI PMIC u33
                                compatible = "ti,tps65086";
                                reg = <0x5e>;

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 7cc0a9b0381a81538b27fda736ece0d429eeed55..f4130cdbbc2e492e4d5e7fb2c5bb43c0dba494c3 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -79,7 +79,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };
@@ -378,23 +377,17 @@
                                reg = <0x20>;
                        };
 
-/*                     drivers/hwmon/pmbus/Kconfig:86:   be called max20751.
-drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
-*/
-                       max20751@72 { /* u95 FIXME - not detected */
+                       max20751@72 { /* u95 */
                                compatible = "maxim,max20751";
                                reg = <0x72>;
                        };
-                       max20751@73 { /* u96 FIXME - not detected */
+                       max20751@73 { /* u96 */
                                compatible = "maxim,max20751";
                                reg = <0x73>;
                        };
                };
                /* Bus 3 is not connected */
        };
-
-       /* FIXME PMOD - j160 */
-       /* FIXME MSP430F - u41 - not detected */
 };
 
 &i2c1 {
@@ -406,8 +399,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
        scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
        sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 
-       /* FIXME PL i2c via PCA9306 - u45 */
-       /* FIXME MSP430 - u41 - not detected */
+       /* PL i2c via PCA9306 - u45 */
        i2c-mux@74 { /* u34 */
                compatible = "nxp,pca9548";
                #address-cells = <1>;
@@ -512,24 +504,19 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
                        #size-cells = <0>;
                        reg = <3>;
                        /* DDR4 SODIMM */
-                       dev@19 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@19 {
                                reg = <0x19>;
                        };
-                       dev@30 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@30 {
                                reg = <0x30>;
                        };
-                       dev@35 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@35 {
                                reg = <0x35>;
                        };
-                       dev@36 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@36 {
                                reg = <0x36>;
                        };
-                       dev@51 { /* u-boot detection - maybe SPD */
-                               compatible = "xxx";
+                       dev@51 {
                                reg = <0x51>;
                        };
                };

diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index 39db60d01b0a8c24221f804228350050a5812893..07f44ea72877a1aced714e9320bc2fd78bb84da7 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -28,8 +28,6 @@
        /delete-node/ phy@21;
 };
 
-/* Different qspi 512Mbit version */
-
 /* Fix collision with u61 */
 &i2c0 {
        i2c-mux@75 {

diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index b811f38a475ee1151a47df5adc88b8fee8fbf646..fd72ae5bf467969f541af8f540db5df982c05146 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -142,7 +142,6 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <4>;
-                       /* FIXME Npt detected */
                        tca6416_u97: gpio@21 {
                                compatible = "ti,tca6416";
                                reg = <0x21>;

diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index e858a77b63e207a20e327228e959c852cd9689f9..ca7f0017f4445ac57a2529db0836379676761a59 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -79,7 +79,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };
@@ -362,9 +361,6 @@
                };
                /* Bus 3 is not connected */
        };
-
-       /* FIXME PMOD - j160 */
-       /* FIXME MSP430F - u41 - not detected */
 };
 
 &i2c1 {
@@ -376,8 +372,7 @@
        scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
        sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 
-       /* FIXME PL i2c via PCA9306 - u45 */
-       /* FIXME MSP430 - u41 - not detected */
+       /* PL i2c via PCA9306 - u45 */
        i2c-mux@74 { /* u34 */
                compatible = "nxp,pca9548";
                #address-cells = <1>;
@@ -451,7 +446,7 @@
                        reg = <5>; /* FAN controller */
                        temp@4c {/* lm96163 - u128 */
                                compatible = "national,lm96163";
-                               reg = <0x4c>; /* FIXME */
+                               reg = <0x4c>;
                        };
                };
                /* 6 - 7 unconnected */

diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 4debead8f5e53fa406fd1b9c59e43241c7e68ea4..75c48f8bb3aacd732217cbc61302bf7b06125fde 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -73,7 +73,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };