dt-bindings: extcon: Document Maxim MAX14526 MUIC

Add bindings for Maxim MAX14526 MicroUSB Integrated Circuit.

Link: https://lore.kernel.org/lkml/20250506073216.43059-2-clamor95@gmail.com/
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

diff --git a/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml b/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml
new file mode 100644 (file)
index 0000000..7eb5918
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/maxim,max14526.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14526 MicroUSB Integrated Circuit (MUIC)
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+  compatible:
+    const: maxim,max14526
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        muic@44 {
+            compatible = "maxim,max14526";
+            reg = <0x44>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <72 IRQ_TYPE_EDGE_FALLING>;
+
+            connector {
+                compatible = "usb-b-connector";
+                label = "micro-USB";
+                type = "micro";
+            };
+
+            port {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                muic_to_charger: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&charger_input>;
+                };
+
+                muic_to_usb: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&usb_input>;
+                };
+
+                muic_to_mhl: endpoint@2 {
+                    reg = <2>;
+                    remote-endpoint = <&mhl_input>;
+                };
+            };
+        };
+    };
+...