+++ /dev/null
-/*
- * (C) Copyright 2007-2008 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-/* use serial multi for all serial devices */
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-#ifdef XILINX_UARTLITE_BASEADDR
-# define CONFIG_XILINX_UARTLITE
-# if defined(XILINX_UARTLITE_BAUDRATE)
-# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
-# endif
-#endif
-
-#if XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550 1
-# define CONFIG_SYS_NS16550_SERIAL
-# define CONFIG_SYS_NS16550_COM1 ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
-
-# if defined(__MICROBLAZEEL__)
-# define CONFIG_SYS_NS16550_REG_SIZE -4
-# else
-# define CONFIG_SYS_NS16550_REG_SIZE 4
-# endif
-
-/* CONS_INDEX for system with uartlite only mustn't define CONFIG_CONS_INDEX
- * u-boot BSP generates CONFIG_CONS_INDEX for system with several uart16550 */
-# if !defined(CONFIG_CONS_INDEX)
-# define CONFIG_CONS_INDEX 1
-# endif
-#endif
-
-#ifdef XILINX_PS7_UART_BASEADDR
-# define CONFIG_ZYNQ_SERIAL
-# define CONFIG_ZYNQ_SERIAL_BASEADDR0 XILINX_PS7_UART_BASEADDR
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK0 XILINX_PS7_UART_CLOCK_HZ
-#endif
-
-/* Must be separated because of priorities */
-#if defined(CONFIG_ZYNQ_SERIAL)
-# define SERIAL_MULTI "serial=setenv stdout serial;setenv stdin serial\0"
-# define CONSOLE_ARG "console=console=ttyPS0,115200\0"
-#elif defined(XILINX_UART16550_BASEADDR)
-# define SERIAL_MULTI "serial=setenv stdout serial;setenv stdin serial\0"
-# define CONSOLE_ARG "console=console=ttyS0,115200\0"
-#elif defined(CONFIG_XILINX_UARTLITE)
-# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
-# define SERIAL_MULTI "serial=setenv stdout serial;setenv stdin serial\0" \
- "stdin=ttyUL0\0" \
- "stdout=ttyUL0\0"
-#endif
-
-#ifdef XILINX_UARTLITE_BASEADDR
-# define TTYUL0 "ttyUL0=setenv stdout ttyUL0;setenv stdin ttyUL0\0"
-#else
-# define TTYUL0
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR1
-# define TTYUL1 "ttyUL1=setenv stdout ttyUL1;setenv stdin ttyUL1\0"
-#else
-# define TTYUL1
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR2
-# define TTYUL2 "ttyUL2=setenv stdout ttyUL2;setenv stdin ttyUL2\0"
-#else
-# define TTYUL2
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR3
-# define TTYUL3 "ttyUL3=setenv stdout ttyUL3;setenv stdin ttyUL3\0"
-#else
-# define TTYUL3
-#endif
-#ifdef CONFIG_SYS_NS16550_COM1
-# define ESERIAL0 "eserial0=setenv stdout eserial0;setenv stdin eserial0\0"
-#else
-# define ESERIAL0
-#endif
-#ifdef CONFIG_SYS_NS16550_COM2
-# define ESERIAL1 "eserial1=setenv stdout eserial1;setenv stdin eserial1\0"
-#else
-# define ESERIAL1
-#endif
-#ifdef CONFIG_SYS_NS16550_COM3
-# define ESERIAL2 "eserial2=setenv stdout eserial2;setenv stdin eserial2\0"
-#else
-# define ESERIAL2
-#endif
-#ifdef CONFIG_SYS_NS16550_COM4
-# define ESERIAL3 "eserial3=setenv stdout eserial3;setenv stdin eserial3\0"
-#else
-# define ESERIAL3
-#endif
-#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
-# define PSSERIAL0 "psserial0=setenv stdout ttyPS0;setenv stdin ttyPS0\0"
-#else
-# define PSSERIAL0
-#endif
-#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
-# define PSSERIAL1 "psserial1=setenv stdout ttyPS0;setenv stdin ttyPS0\0"
-#else
-# define PSSERIAL1
-#endif
-
-#if !defined(CONFIG_BAUDRATE)
- #define CONFIG_BAUDRATE 115200
-#endif
-
-#if !defined(XILINX_UARTLITE_BASEADDR) && !defined(XILINX_UART16550_BASEADDR) && !defined(XILINX_PS7_UART_BASEADDR)
-# error Undefined uart
-#endif
-
-/* enable nul device */
-/* #define CONFIG_SYS_DEVICE_NULLDEV */
-
-/* setting reset address */
-/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/
-
-/* ethernet */
-#undef CONFIG_SYS_ENET
-#ifdef XILINX_EMAC_BASEADDR
- #define CONFIG_XILINX_EMAC 1
- #define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_EMACLITE_BASEADDR)
- #define CONFIG_XILINX_EMACLITE 1
- #define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_LLTEMAC_BASEADDR)
- #define CONFIG_XILINX_LL_TEMAC 1
- #define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_AXIEMAC_BASEADDR)
- #define CONFIG_XILINX_AXIEMAC 1
- #define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_PS7_GEM_BASEADDR)
- #define CONFIG_ZYNQ_GEM
- #define CONFIG_SYS_ENET
-#endif
-
-#undef ET_DEBUG
-
-/* gpio */
-#ifdef XILINX_GPIO_BASEADDR
- #define CONFIG_XILINX_GPIO
- #define CONFIG_SYS_GPIO_0 1
- #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
-#endif
-
-/* interrupt controller */
-#ifdef XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0 1
- #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
-#endif
-
-/* timer */
-#ifdef XILINX_TIMER_BASEADDR
- #if (XILINX_TIMER_IRQ != -1)
- #define CONFIG_SYS_TIMER_0 1
- #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
- #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
- #define FREQUENCE XILINX_CLOCK_FREQ
- #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
- #endif
-#elif XILINX_CLOCK_FREQ
- #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
-#endif
-/* FSL */
-/* #define CONFIG_SYS_FSL_2 */
-/* #define FSL_INTR_2 1 */
-
-/*
- * memory layout - Example
- * TEXT_BASE = 0x1200_0000;
- * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
- * CONFIG_SYS_SRAM_SIZE = 0x0400_0000;
- *
- * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
- * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
- *
- * 0x1000_0000 CONFIG_SYS_SDRAM_BASE
- * FREE
- * 0x1200_0000 TEXT_BASE
- * U-BOOT code
- * 0x1202_0000
- * FREE
- *
- * STACK
- * 0x13F7_F000 CONFIG_SYS_MALLOC_BASE
- * MALLOC_AREA 256kB Alloc
- * 0x11FB_F000 CONFIG_SYS_MONITOR_BASE
- * MONITOR_CODE 256kB Env
- * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
- * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
- */
-
-/* ddr sdram - main memory */
-#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
-#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
-
-/* Flash memory handling. There are 5 cases:
- * Parallel Flash, bootenv in flash
- * Parallel flash, no bootenv in flash (RAMENV will be set)
- * SPI flash, bootenv in flash
- * SPI flash, no bootenv in flash (RAMENV will be set)
- * No flash at all (RAMENV will be set)
-*/
-
-/* Some preprocessor magic to auto-set RAMENV */
-#define BESIZE @besize@
-
-#if !(BESIZE+0)
-#define RAMENV
-#endif
-
-/* Use ZYNQ_BOOT_* to drive the boot dev */
-@ZYNQ_BOOT_DEV@
-#if defined(CONFIG_ZYNQ)
-#if defined(ZYNQ_BOOT_QSPI) && defined(XILINX_PS7_QSPI_FLASH_BASEADDR)
- #define XILINX_SPI_FLASH_BASEADDR
-#elif defined(ZYNQ_BOOT_SD) && defined(XILINX_PS7_SDIO_BASEADDR)
- #define XILINX_SD_FLASH_BASEADDR XILINX_PS7_SDIO_BASEADDR
- /* enable other */
- #if defined(XILINX_PS7_QSPI_FLASH_BASEADDR)
- #define XILINX_SPI_FLASH_BASEADDR
- #endif
- #if defined(XILINX_PS7_NOR_FLASH_BASEADDR)
- #define XILINX_FLASH_START XILINX_PS7_NOR_FLASH_BASEADDR
- #define XILINX_FLASH_SIZE XILINX_PS7_NOR_FLASH_SIZE
- #endif
- #if defined(XILINX_PS7_NAND_BASEADDR)
- #define XILINX_NAND_FLASH_BASEDDR
- #define CONFIG_CMD_NAND
- #define CONFIG_CMD_NAND_LOCK_UNLOCK
- #define CONFIG_SYS_MAX_NAND_DEVICE 1
- #define CONFIG_MTD_DEVICE
- #define CONFIG_SYS_NAND_ONFI_DETECTION
- #endif
-/* Features that not been implemented due to hw support */
-#elif defined(ZYNQ_BOOT_NOR) && defined(XILINX_PS7_NOR_FLASH_BASEADDR)
- #define XILINX_FLASH_START XILINX_PS7_NOR_FLASH_BASEADDR
- #define XILINX_FLASH_SIZE XILINX_PS7_NOR_FLASH_SIZE
-#elif defined(ZYNQ_BOOT_NAND) && defined(XILINX_PS7_NAND_FLASH_BASEADDR)
- #define XILINX_NAND_FLASH_BASEDDR
-#elif defined(ZYNQ_BOOT_OTHER)
- #define RAMENV
-#else
- #error "Unknown boot source for Zynq. Please set the boot device in appconfig"
-#endif
-#endif
-
-#if defined(XILINX_FLASH_START) /* Parallel Flash */
- #define FLASH
- #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
- #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
- #define CONFIG_SYS_FLASH_CFI 1
- #define CONFIG_FLASH_CFI_DRIVER 1
- #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */
- #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */
- #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-
- /* Assume env is in flash, this may be undone lower down */
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
-
- #if defined (CONFIG_ZYNQ)
- #define CONFIG_SYS_FLASH_PROTECTION 0 /* use hardware protection */
- /* optional flash operation parameter from zynq */
- #define CONFIG_SYS_FLASH_ERASE_TOUT 1000
- #define CONFIG_SYS_FLASH_WRITE_TOUT 5000
- #define CONFIG_FLASH_SHOW_PROGRESS 10
- #else
- #define CONFIG_SYS_FLASH_PROTECTION
- #endif
-
- #define CONFIG_ENV_ADDR @bestart@
- #define CONFIG_ENV_SIZE @besize@
-#elif defined(XILINX_SPI_FLASH_BASEADDR) /* SPI Flash */
- #if defined(XILINX_PS7_QSPI_FLASH_BASEADDR)
- #define CONFIG_ZYNQ_QSPI
- #define CONFIG_CMD_SPI
- #define CONFIG_ENV_SPI_MAX_HZ XILINX_SPI_FLASH_MAX_FREQ
- #define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
- #define CONFIG_SPI_FLASH_PLNX
- #else
- #define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
- #define CONFIG_ENV_SPI_MAX_HZ XILINX_SPI_FLASH_MAX_FREQ
- #define CONFIG_ENV_SPI_CS XILINX_SPI_FLASH_CS
- #define CONFIG_XILINX_SPI 1
- #endif
-
- #define CONFIG_SPI_FLASH 1
- #define CONFIG_SPI_FLASH_ATMEL
- #define CONFIG_SPI_FLASH_SPANSION
- #define CONFIG_SPI_FLASH_STMICRO
- #define CONFIG_SPI_FLASH_WINBOND
-
- #define CONFIG_CMD_SF
-
- #define CONFIG_ENV_SPI_MODE @spiflashmode@
-
- #define CONFIG_SYS_NO_FLASH
- #undef CONFIG_CMD_FLASH
-
- /* Assume env is in flash, this may be undone lower down */
- #define CONFIG_ENV_IS_IN_SPI_FLASH
- #define CONFIG_ENV_OFFSET @bestart@
- #define CONFIG_ENV_SIZE @besize@
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
-
- #ifndef CONFIG_SPI_FLASH_DEV_USERDEFINED
- #define CONFIG_SPI_FLASH_@spiflashdev@
- #endif
-#elif defined(XILINX_NAND_FLASH_BASEDDR) /* NAND Flash */
- #define CONFIG_NAND_FLASH 1
- #define CONFIG_NAND_ZYNQ
- #define CONFIG_SYS_NAND_SELF_INIT
- #define CONFIG_CMD_NAND
- #define CONFIG_CMD_NAND_LOCK_UNLOCK
- #define CONFIG_SYS_MAX_NAND_DEVICE 1
- #define CONFIG_SYS_NAND_BASE ZYNQ_NAND_BASEADDR
-
- #define CONFIG_SYS_NO_FLASH 1
- #define CONFIG_MTD_DEVICE
- #define CONFIG_SYS_NAND_ONFI_DETECTION
-
- #define CONFIG_ENV_IS_IN_NAND
- #define CONFIG_ENV_OFFSET @bestart@
- #define CONFIG_ENV_SIZE @besize@
-#else /* No flash memory at all */
- /* ENV in RAM */
- #define RAMENV
- #define CONFIG_SYS_NO_FLASH 1
-#endif /* !FLASH */
-
-#ifdef RAMENV
- #define CONFIG_ENV_IS_NOWHERE 1
- #undef CONFIG_ENV_IS_IN_FLASH
- #undef CONFIG_ENV_IS_IN_SPI_FLASH
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
-#endif
-
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
- #define CONFIG_SYSTEMACE
- /* #define DEBUG_SYSTEMACE */
- #define SYSTEMACE_CONFIG_FPGA
- #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
- #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
- #define CONFIG_DOS_PARTITION
-#endif
-
-#if defined(XILINX_USE_ICACHE)
- #define CONFIG_ICACHE
-#else
- #undef CONFIG_ICACHE
-#endif
-
-#if defined(XILINX_USE_DCACHE)
- #define CONFIG_DCACHE
-#else
- #undef CONFIG_DCACHE
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-/* FIXME: hack for zynq */
-#ifndef CONFIG_ZYNQ
-#define CONFIG_CMD_IRQ
-#endif
-#define CONFIG_CMD_ECHO
-
-/* #define CONFIG_CMD_ROMFS */
-
-/*#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
- #define CONFIG_CMD_CACHE
-#else
- #undef CONFIG_CMD_CACHE
-#endif
-*/
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_JFFS2
-#ifndef CONFIG_SYS_ENET
- #undef CONFIG_CMD_NET
- #undef CONFIG_NET_MULTI
-#else
- #define CONFIG_CMD_PING
- #define CONFIG_NET_MULTI
- #define CONFIG_CMD_DHCP
-#endif
-
-#if defined(CONFIG_SYSTEMACE)
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-#endif
-
-/* Secure Digital */
-#if defined(XILINX_PS7_SDIO_BASEADDR)
-# define CONFIG_MMC 1
-# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
-# if (XILINX_PS7_SDIO_BASEADDR == CONFIG_ZYNQ_SDHCI_BASEADDR0)
-# define CONFIG_ZYNQ_SDHCI0
-# else
-# define CONFIG_ZYNQ_SDHCI1
-# endif
-# define CONFIG_CMD_MMC
-# define CONFIG_CMD_FAT
-# define CONFIG_CMD_EXT2
-# define CONFIG_DOS_PARTITION
-/* For now, use only single block reads for the MMC */
-# define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
-#endif
-
-#if defined(FLASH)
- #define CONFIG_CMD_FLASH
- #define CONFIG_CMD_IMLS
-#else
- #undef CONFIG_CMD_IMLS
- #undef CONFIG_CMD_FLASH
- #undef CONFIG_CMD_SAVEENV
- #undef CONFIG_CMD_SAVES
-#endif
-
-#if !defined(RAMENV)
- #define CONFIG_CMD_SAVEENV
- #define CONFIG_CMD_SAVES
-#endif
-
-#if defined(CONFIG_CMD_JFFS2)
-/* JFFS2 partitions */
-#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=@mtdpartsname@"
-
-/* default mtd partition table */
-#define MTDPARTS_DEFAULT "mtdparts=@mtdparts@"
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "U-Boot-PetaLinux> "
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
- /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */
-
-#define CONFIG_BOOTDELAY 4
-/* Don't define BOOTARGS, we get it from the DTB chosen fragment */
-#undef CONFIG_BOOTARGS
-#define CONFIG_HOSTNAME XILINX_BOARD_NAME
-
-/* set up default boot command */
-#ifdef FLASH
-# define CONFIG_BOOTCOMMAND "setenv var \"if test ${dtbsize} -le 0\\; then bootm ${kernstart}\\; else run dtbboot\\; fi\"; run var; setenv var"
-#elif defined(CONFIG_SPI_FLASH)
-# define CONFIG_BOOTCOMMAND "setenv var \"if test ${dtbsize} -le 0\\; then run sfboot\\; else run dtbboot\\; fi\"; run var; setenv var"
-#elif defined(CONFIG_NAND_FLASH)
-# define CONFIG_BOOTCOMMAND "setenv var \"if test ${dtbsize} -le 0\\; then run nandboot\\; else run dtbboot\\; fi\"; run var; setenv var"
-#endif
-
-#define CONFIG_ENV_OVERWRITE /* Allow to overwrite the u-boot environment variables */
-#define CONFIG_IPADDR @ipaddr@
-#define CONFIG_SERVERIP @serverip@
-#define CONFIG_ETHADDR @ethaddr@
-#define CONFIG_BOOTP_SERVERIP
-
-/* architecture dependent code */
-#define CONFIG_SYS_USR_EXCEP /* user exception */
-#define CONFIG_SYS_HZ 1000
-
-/* netconsole */
-#ifdef CONFIG_SYS_ENET
-#define CONFIG_NETCONSOLE 1
-
-#define NETCONSOLE_ARG "nc=setenv stdout nc;setenv stdin nc;\0" \
- "ncip=@serverip@\0"
-/* "stdin=nc\0" \
- "stdout=nc\0"
-*/
-#else
-#define NETCONSOLE_ARG
-#endif
-
-#ifndef CONFIG_SYS_ENET
-# define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo;"
-#else
-# define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo;@dhcp@"
-#endif
-
-#if defined(CONFIG_ZYNQ)
-#define CONFIG_EXTRA_ARCH_ENV_SETTINGS \
- "load_boot=tftp ${clobstart} BOOT.BIN\0" \
- "update_boot=setenv img BOOT.BIN; setenv psize ${bootsize}; setenv installcmd install_uboot; run load_boot test_img; setenv img; setenv psize; setenv installcmd\0"
-#else
-#define CONFIG_EXTRA_ARCH_ENV_SETTINGS \
- "load_uboot=tftp ${clobstart} u-boot-s.bin\0" \
- "update_uboot=setenv img U-BOOT; setenv psize ${bootsize}; setenv installcmd install_uboot; run load_uboot test_img; setenv img; setenv psize; setenv installcmd\0"
-#endif
-
-#if defined(XILINX_PS7_SDIO_BASEADDR)
- #if defined(FLASH) || defined(CONFIG_SPI_FLASH) || defined(CONFIG_NAND_ZYNQ)
- #define CONFIG_EXTRA_SD_FLASH_UPDATE_ENV \
- "sd_update_boot=echo Updating BOOT from SD;mmcinfo; fatload mmc 0:1 ${clobstart} BOOT.BIN; run install_uboot\0" \
- "sd_update_kernel=echo Updating Kernel from SD;mmcinfo; fatload mmc 0:1 ${clobstart} ${bootfile}; set fileaddr ${clobstart};run install_kernel\0"
- #else
- #define CONFIG_EXTRA_SD_FLASH_UPDATE_ENV
- #endif
-#define CONFIG_EXTRA_SD_ENV_SETTINGS \
- "sdboot=echo boot Petalinux; mmcinfo;fatload mmc 0 ${netstart} ${bootfile}; bootm \0" \
- CONFIG_EXTRA_SD_FLASH_UPDATE_ENV
-#else
-#define CONFIG_EXTRA_SD_ENV_SETTINGS
-#endif
-
-#if defined(FLASH) || defined(CONFIG_SPI_FLASH) || defined(CONFIG_NAND_FLASH)
-#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- CONFIG_EXTRA_SD_ENV_SETTINGS \
- CONFIG_EXTRA_ARCH_ENV_SETTINGS \
- "autoload=no\0" \
- "bootfile=image.ub\0" \
- "mtdids=nor0=@mtdpartsname@\0" \
- "mtdparts=mtdparts=@mtdparts@\0" \
- CONSOLE_ARG \
- NETCONSOLE_ARG \
- SERIAL_MULTI \
- TTYUL0 \
- TTYUL1 \
- TTYUL2 \
- TTYUL3 \
- ESERIAL0 \
- ESERIAL1 \
- ESERIAL2 \
- ESERIAL3 \
- PSSERIAL0 \
- PSSERIAL1 \
- "clobstart=@cstart@\0" \
- "netstart=@nstart@\0" \
- "dtbnetstart=@dtbnstart@\0" \
- "loadaddr=@nstart@\0" \
- "bootsize=@bsize@\0" \
- "bootstart=@bstart@\0" \
- "bootenvsize=@besize@\0" \
- "bootenvstart=@bestart@\0" \
- "confsize=@confsize@\0" \
- "confstart=@confstart@\0" \
- "jffs2size=@jffs2size@\0" \
- "jffs2start=@jffs2start@\0" \
- "kernsize=@ksize@\0" \
- "kernstart=@kstart@\0" \
- "dtbsize=@dtbsize@\0" \
- "dtbstart=@dtbstart@\0" \
- "fault=echo $img image size is greater than allocated place - $img is NOT UPDATED\0" \
- "load_kernel=tftp ${clobstart} image.ub\0" \
- "load_jffs2=tftp ${clobstart} rootfs.jffs2\0" \
- "load_dtb=tftp ${clobstart} system.dtb\0" \
- "update_kernel=setenv img KERNEL; setenv psize ${kernsize}; setenv installcmd \"install_kernel\"; run load_kernel test_crc; setenv img; setenv psize; setenv installcmd\0" \
- "update_jffs2=setenv img JFFS2; setenv psize ${jffs2size}; setenv installcmd install_jffs2; run load_jffs2 test_img; setenv img; setenv psize; setenv installcmd\0" \
- "update_dtb=setenv img DTB; setenv psize ${dtbsize}; setenv installcmd install_dtb; run load_dtb test_img; setenv img\0" \
- "test_crc=if imi ${clobstart}; then run test_img; else echo $img Bad CRC - $img is NOT UPDATED; fi\0" \
- "test_img=setenv var \"if test ${filesize} -gt ${psize}\\; then run fault\\; else run ${installcmd}\\; fi\"; run var; setenv var\0" \
- "netboot=tftp ${netstart} image.ub && bootm\0" \
- "dtbnetboot=tftp ${netstart} image.ub; tftp ${dtbnetstart} system.dtb; bootm ${netstart} - ${dtbnetstart}\0" \
- "get_dtb=run cp_dtb2ram; fdt addr ${clobstart}\0"
-#endif
-
-#if defined(FLASH) /* Parallel Flash */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "eraseenv=protect off ${bootenvstart} +${bootenvsize}; erase ${bootenvstart} +${bootenvsize}\0" \
- "eraseconf=protect off ${confstart} +${confsize}; erase ${confstart} +${confsize}\0" \
- "cp_dtb2ram=cp.b ${dtbstart} ${clobstart} ${dtbsize}\0" \
- "install_kernel=protect off ${kernstart} +${kernsize};erase ${kernstart} +${kernsize};" \
- "cp.b ${fileaddr} ${kernstart} ${filesize}\0" \
- "install_uboot=protect off ${bootstart} +${bootsize};erase ${bootstart} +${bootsize};" \
- "cp.b ${clobstart} ${bootstart} ${filesize}\0" \
- "install_jffs2=protect off ${jffs2start} +${jffs2size};erase ${jffs2start} +${jffs2size};" \
- "cp.b ${clobstart} ${jffs2start} ${filesize}\0" \
- "install_dtb=protect off ${dtbstart} +${dtbsize}; erase ${dtbstart} +${dtbsize};" \
- "cp.b ${clobstart} ${dtbstart} ${filesize}\0" \
- "dtbboot=bootm ${kernstart} - ${dtbstart}\0" \
- ""
-#elif defined(CONFIG_SPI_FLASH) /* SPI Flash */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "eraseenv=sf probe 0; sf erase ${bootenvstart} ${bootenvsize}\0" \
- "eraseconf=sf probe 0; sf erase ${confstart} ${confsize}\0" \
- "cp_dtb2ram=sf probe 0; sf read ${clobstart} ${dtbstart} ${dtbsize}\0" \
- "install_kernel=sf probe 0; sf erase ${kernstart} ${kernsize};" \
- "sf write ${fileaddr} ${kernstart} ${filesize}\0" \
- "install_uboot=sf probe 0; sf erase ${bootstart} ${bootsize};" \
- "sf write ${clobstart} ${bootstart} ${filesize}\0" \
- "install_jffs2=sf probe 0; sf erase ${jffs2start} ${jffs2size};" \
- "sf write ${clobstart} ${jffs2start} ${filesize}\0" \
- "install_dtb=sf probe 0; sf erase ${dtbstart} ${dtbsize};" \
- "sf write ${clobstart} ${dtbstart} ${filesize}\0" \
- "sfboot=sf probe 0; sf read ${netstart} ${kernstart} ${kernsize}; bootm ${netstart}\0" \
- "dtbboot=sf probe 0; sf read ${netstart} ${kernstart} ${kernsize}; sf read ${dtbnetstart} ${dtbstart} ${dtbsize}; bootm ${netstart} - ${dtbnetstart}\0" \
- ""
-#elif defined(CONFIG_NAND_FLASH) /* NAND Flash */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "eraseenv=nand unlock ${bootenvstart} ${bootenvsize}; nand erase ${bootenvstart} ${bootenvsize}\0" \
- "eraseconf=nand unlock ${confstart} ${confsize}; nand erase ${confstart} ${confsize}\0" \
- "cp_dtb2ram=cp.b ${dtbstart} ${clobstart} ${dtbsize}\0" \
- "install_kernel=nand unlock ${kernstart} ${kernsize};nand erase ${kernstart} ${kernsize};" \
- "nand write ${fileaddr} ${kernstart} ${filesize}\0" \
- "install_uboot=nand unlock ${bootstart} ${bootsize};nand erase ${bootstart} ${bootsize};" \
- "nand write ${clobstart} ${bootstart} ${filesize}\0" \
- "install_jffs2=nand unlock ${jffs2start} ${jffs2size};nand erase ${jffs2start} ${jffs2size};" \
- "nand write.jffs2 ${clobstart} ${jffs2start} ${filesize}\0" \
- "install_dtb=nand unlock ${dtbstart} ${dtbsize};nand erase ${dtbstart} ${dtbsize};" \
- "nand write ${clobstart} ${dtbstart} ${filesize}\0" \
- "nandboot=nand read ${netstart} ${kernstart} ${kernsize}; bootm ${netstart}\0" \
- "dtbboot=nand read ${netstart} ${kernstart} ${kernsize}; nand read ${dtbnetstart} ${dtbstart} ${dtbsize}; bootm ${netstart} - ${dtbnetstart}\0" \
- ""
-#else /* No Flash */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_SD_ENV_SETTINGS \
- CONSOLE_ARG \
- NETCONSOLE_ARG \
- SERIAL_MULTI \
- TTYUL0 \
- TTYUL1 \
- TTYUL2 \
- TTYUL3 \
- ESERIAL0 \
- ESERIAL1 \
- ESERIAL2 \
- ESERIAL3 \
- PSSERIAL0 \
- PSSERIAL1 \
- "bootfile=image.ub\0" \
- "netstart=@nstart@\0" \
- "dtbnetstart=@dtbnstart@\0" \
- "loadaddr=@nstart@\0" \
- "netboot=tftp ${netstart} image.ub && bootm\0" \
- "dtbnetboot=tftp ${netstart} image.ub; tftp ${dtbnetstart} system.dtb; bootm ${netstart} - ${dtbnetstart}\0" \
- ""
-#endif /* Flash */
-
-#define CONFIG_CMDLINE_EDITING
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#define CONFIG_FIT 1
-#define CONFIG_OF_LIBFDT 1
-
-#if CONFIG_SYS_SDRAM_SIZE >= 0x10000000
-# ifndef CONFIG_SYS_BOOTMAPSZ
-# define CONFIG_SYS_BOOTMAPSZ 0x0f000000
-# endif
-#endif
-
-/* Make the BOOTM LEN big enough for the compressed image */
-#define CONFIG_SYS_BOOTM_LEN 0x1000000
-
-#include <configs/petalinux/@per_platform_config@>
projects / thirdparty / u-boot.git / commitdiff
