+++ /dev/null
-From b642d4825441bf30c72b72deb739bd2d5f53af08 Mon Sep 17 00:00:00 2001
-From: Ondrej Jirman <megous@megous.com>
-Date: Sat, 22 Feb 2020 23:31:53 +0100
-Subject: ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection
-
-From: Ondrej Jirman <megous@megous.com>
-
-commit b642d4825441bf30c72b72deb739bd2d5f53af08 upstream.
-
-USB-ID signal has a pullup on the schematic, but in reality it's not
-pulled up, so add a GPIO pullup. And we also need a usb0_vbus_power-supply
-for VBUS detection.
-
-This fixes OTG mode detection and charging issues on TBS A711 tablet.
-The issues came from ID pin reading 0, causing host mode to be enabled,
-when it should not be, leading to DRVVBUS being enabled, which disabled
-the charger.
-
-Fixes: f2f221c7810b824e ("ARM: dts: sun8i: a711: Enable USB OTG")
-Signed-off-by: Ondrej Jirman <megous@megous.com>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
----
- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
-+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
-@@ -416,7 +416,8 @@
- };
-
- &usbphy {
-- usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-+ usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
- usb0_vbus-supply = <®_drivevbus>;
- usb1_vbus_supply = <®_vmain>;
- usb2_vbus_supply = <®_vmain>;
netfilter-nft_fwd_netdev-validate-family-and-chain-type.patch
netfilter-nft_fwd_netdev-allow-to-redirect-to-ifb-via-ingress.patch
bpf-btf-fix-btf-verification-of-enum-members-in-struct-union.patch
-arm-dts-sun8i-a83t-tbs-a711-fix-usb-otg-mode-detection.patch
vti6-fix-memory-leak-of-skb-if-input-policy-check-fails.patch
revert-r8169-check-that-realtek-phy-driver-module-is-loaded.patch
mac80211-add-option-for-setting-control-flags.patch