realtek: rtl930x: add support for Horaco ZX-SWTGW2C8F

Device specification
--------------------
SoC Type:              Realtek RTL9303
RAM:                   128MB
Flash:                 Winbond 16MiB
Ethernet               8x SFP+ 10G
LEDs:                  1x power green hardwired
                       1x SYS green
                       8x2 LEDs per RJ45 port
                           1x green  ( 1G link/activity)
                           1x blue   (10G link/activity)
Button:                Reset
Console:               1x CISCO-style RJ45 RS232 port
Bootloader:            Realtek U-Boot 2011.12

Installing OpenWrt
------------------
Install the factory image through the web interface.

Signed-off-by: Manuel Stocker <mensi@mensi.ch>
Link: https://github.com/openwrt/openwrt/pull/23648
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>

diff --git a/target/linux/realtek/dts/rtl9303_horaco_zx-swtgw2c8f.dts b/target/linux/realtek/dts/rtl9303_horaco_zx-swtgw2c8f.dts
new file mode 100644 (file)
index 0000000..a4bfba5
--- /dev/null
+++ b/target/linux/realtek/dts/rtl9303_horaco_zx-swtgw2c8f.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rtl930x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       compatible = "horaco,zx-swtgw2c8f", "realtek,rtl9303-soc";
+       model = "Horaco ZX-SWTGW2C8F";
+
+       aliases {
+               label-mac-device = &ethernet0;
+               led-boot = &led_sys;
+               led-failsafe = &led_sys;
+               led-running = &led_sys;
+               led-upgrade = &led_sys;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 earlyprintk";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x8000000>;
+       };
+
+       led_set {
+               compatible = "realtek,rtl9300-leds";
+               realtek,led-mode = <RTL93XX_LED_MODE_SINGLE_COLOR_SCAN>;
+
+               led_set0 = <RTL93XX_LED_SET_NONE
+                           (RTL93XX_LED_SET_1G | RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)
+                           (RTL93XX_LED_SET_10G | RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinmux_disable_sys_led>;
+
+               led_sys: sys {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               mode {
+                       label = "reset";
+                       gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       sfp0: sfp-p1 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw0>;
+               mod-def0-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp1: sfp-p2 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw1>;
+               mod-def0-gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp2: sfp-p3 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw2>;
+               mod-def0-gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp3: sfp-p4 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw3>;
+               mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp4: sfp-p5 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw4>;
+               mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp5: sfp-p6 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw5>;
+               mod-def0-gpio = <&gpio1 22 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp6: sfp-p7 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw6>;
+               mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp7: sfp-p8 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c_hw7>;
+               mod-def0-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
+               los-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&mdio_aux {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinmux_gpio_mdio_en>;
+       status = "okay";
+
+       gpio1: gpio@0 {
+               compatible = "realtek,rtl8231";
+               reg = <0>;
+
+               gpio-controller;
+               #gpio-cells = <2>;
+               gpio-ranges = <&gpio1 0 0 37>;
+       };
+
+};
+
+&i2c_mst1 {
+       status = "okay";
+
+       i2c_hw0: i2c@0 { reg = <0>; };
+       i2c_hw1: i2c@1 { reg = <1>; };
+       i2c_hw2: i2c@2 { reg = <2>; };
+       i2c_hw3: i2c@3 { reg = <3>; };
+       i2c_hw4: i2c@4 { reg = <4>; };
+       i2c_hw5: i2c@5 { reg = <5>; };
+       i2c_hw6: i2c@6 { reg = <6>; };
+       i2c_hw7: i2c@7 { reg = <7>; };
+};
+
+&switch0 {
+       ethernet-ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               SWITCH_PORT_SFP(0, 1, 2, 0, 0)
+               SWITCH_PORT_SFP(8, 2, 3, 0, 1)
+               SWITCH_PORT_SFP(16, 3, 4, 0, 2)
+               SWITCH_PORT_SFP(20, 4, 5, 0, 3)
+               SWITCH_PORT_SFP(24, 5, 6, 0, 4)
+               SWITCH_PORT_SFP(25, 6, 7, 0, 5)
+               SWITCH_PORT_SFP(26, 7, 8, 0, 6)
+               SWITCH_PORT_SFP(27, 8, 9, 0, 7)
+
+               port@1c {
+                       reg = <28>;
+                       ethernet = <&ethernet0>;
+                       phy-mode = "internal";
+                       fixed-link {
+                               speed = <1000>;
+                               full-duplex;
+                       };
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "loader";
+                               reg = <0x0 0xe0000>;
+                               read-only;
+                       };
+
+                       partition@e0000 {
+                               label = "bdinfo";
+                               reg = <0xe0000 0x10000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "u-boot,env";
+
+                                       macaddr_ubootenv_ethaddr: ethaddr {
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
+                       };
+
+                       partition@f0000 {
+                               label = "sysinfo";
+                               reg = <0xf0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "jffs2-cfg";
+                               reg = <0x100000 0x100000>;
+                               read-only;
+                       };
+
+                       partition@200000 {
+                               label = "jffs2-log";
+                               reg = <0x200000 0x100000>;
+                               read-only;
+                       };
+
+                       partition@300000 {
+                               label = "runtime";
+                               reg = <0x300000 0xc00000>;
+                               compatible = "openwrt,uimage";
+                               openwrt,ih-magic = <0x83800000>;
+                       };
+
+                       partition@f00000 {
+                               label = "oeminfo";
+                               reg = <0xf00000 0x100000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&ethernet0 {
+       nvmem-cells = <&macaddr_ubootenv_ethaddr 0>;
+       nvmem-cell-names = "mac-address";
+};

diff --git a/target/linux/realtek/image/rtl930x.mk b/target/linux/realtek/image/rtl930x.mk
index 1b5b0419cfa1f9b29472ac537f645aee1a0560c0..2ae8677e40061332581c70413c04f66848bda7b4 100644 (file)
--- a/target/linux/realtek/image/rtl930x.mk
+++ b/target/linux/realtek/image/rtl930x.mk
@@ -69,6 +69,23 @@ define Device/hasivo_s600wp-5gt-2sx-se
 endef
 TARGET_DEVICES += hasivo_s600wp-5gt-2sx-se
 
+define Device/horaco_zx-swtgw2c8f
+  SOC := rtl9303
+  UIMAGE_MAGIC := 0x83800000
+  DEVICE_VENDOR := Horaco
+  DEVICE_MODEL := ZX-SWTGW2C8F
+  IMAGE_SIZE := 12288k
+  $(Device/kernel-lzma)
+  IMAGES += factory.bix
+  IMAGE/factory.bix := \
+       append-kernel | \
+       pad-to 64k | \
+       append-rootfs | \
+       pad-rootfs | \
+       check-size
+endef
+TARGET_DEVICES += horaco_zx-swtgw2c8f
+
 define Device/plasmacloud-common
   SOC := rtl9302
   UIMAGE_MAGIC := 0x93000000