--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Variscite Symphony carrier board for VAR-SOM-AM62P
+ *
+ * Link: https://www.variscite.it/product/single-board-computers/symphony-board/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5-var-som.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-AM62P on Symphony-Board";
+ compatible = "variscite,var-som-am62p-symphony", "variscite,var-som-am62p", "ti,am62p5";
+
+ aliases {
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ mmc2 = &sdhci2;
+ serial0 = &main_uart0;
+ serial2 = &main_uart2;
+ serial5 = &main_uart5;
+ serial6 = &main_uart6;
+ spi5 = &main_spi2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clk_ov5640_fixed: clock-24000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+ };
+
+ button-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+ };
+
+ button-menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-heartbeat {
+ label = "Heartbeat";
+ linux,default-trigger = "heartbeat";
+ gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_2p8v: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_1p5v: regulator-1p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_sdhc1_vmmc: regulator-sdhc1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_SD";
+ vin-supply = <®_sdhc1_vmmc_int>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ reg_sdhc1_vmmc_int: regulator-sdhc1-int {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_SD_INT";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_vmmc>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&main_gpio0 53 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+ compatible = "regulator-gpio";
+ regulator-name = "+V3.3_SD_VQMMC";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_vqmmc>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpios = <&main_gpio0 56 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ bootph-all;
+ };
+
+ reg_ov5640_buf_en: regulator-camera-buf-en {
+ compatible = "regulator-fixed";
+ regulator-name = "ov5640_buf_en";
+ gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ transceiver1: can-phy {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_extcon>;
+ label = "USB-C";
+ id-gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ usb_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>,
+ <&pinctrl_rgmii2>;
+ status = "okay";
+};
+
+&cpsw3g_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio1>;
+ status = "okay";
+
+ cpsw3g_phy1: ethernet-phy@5 {
+ compatible = "ethernet-phy-id0283.bc30";
+ reg = <5>;
+ reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+ };
+};
+
+&cpsw_port2 {
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the Symphony PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <&cpsw3g_phy1>;
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
+
+&main_i2c0{
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+ AVDD-supply = <®_2p8v>;
+ DOVDD-supply = <®_1p8v>;
+ DVDD-supply = <®_1p5v>;
+ powerdown-gpios = <&main_gpio0 10 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+ /* GPIO expander */
+ pca9534: gpio@20 {
+ compatible = "nxp,pca9534";
+ reg = <0x20>;
+ gpio-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9534>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+ #gpio-cells = <2>;
+ status = "okay";
+
+ usb3-sel-hog {
+ gpio-hog;
+ gpios = <4 0>;
+ output-low;
+ line-name = "usb3_sel";
+ };
+
+ eth-som-vselect-hog {
+ gpio-hog;
+ gpios = <6 0>;
+ output-low;
+ line-name = "eth-vselect";
+ };
+
+ eth-mdio-enable-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ output-high;
+ line-name = "eth-mdio-enable";
+ };
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mcan0>;
+ phys = <&transceiver1>;
+ status = "okay";
+};
+
+&main_pmx0 {
+ pinctrl_extcon: main-extcon-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */
+ >;
+ };
+
+ pinctrl_i2c0: main-i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */
+ AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */
+ >;
+ };
+
+ pinctrl_i2c1: main-i2c1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
+ AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_mcan0: main-mcan0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01dc, PIN_INPUT, 0) /* (F20) MCAN0_RX */
+ AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */
+ >;
+ };
+
+ pinctrl_mmc1: main-mmc1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */
+ AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */
+ AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */
+ AM62PX_IOPAD(0x022c, PIN_INPUT, 0) /* (H23) MMC1_DAT1 */
+ AM62PX_IOPAD(0x0228, PIN_INPUT, 0) /* (H22) MMC1_DAT2 */
+ AM62PX_IOPAD(0x0224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */
+ AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_rgmii2: main-rgmii2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */
+ AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */
+ AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */
+ AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */
+ AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */
+ AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */
+ AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */
+ AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */
+ AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */
+ AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */
+ AM62PX_IOPAD(0x0168, PIN_INPUT_PULLDOWN, 0) /* (D16) RGMII2_TXC */
+ AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */
+ >;
+ };
+
+ pinctrl_spi2: main-spi2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01b0, PIN_INPUT, 1) /* (G20) MCASP0_ACLKR.SPI2_CLK */
+ AM62PX_IOPAD(0x0194, PIN_OUTPUT, 1) /* (D25) MCASP0_AXR3.SPI2_D0 */
+ AM62PX_IOPAD(0x0198, PIN_INPUT, 1) /* (E25) MCASP0_AXR2.SPI2_D1 */
+ AM62PX_IOPAD(0x01ac, PIN_OUTPUT, 7) /* (G23) MCASP0_AFSR.GPIO1_13 */
+ >;
+ };
+
+ pinctrl_uart0: main-uart0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */
+ AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_uart2: main-uart2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x005c, PIN_INPUT_PULLUP, 2) /* (AC25) GPMC0_AD8.UART2_RXD */
+ AM62PX_IOPAD(0x0060, PIN_OUTPUT, 2) /* (AB25) GPMC0_AD9.UART2_TXD */
+ >;
+ };
+
+ pinctrl_uart6: main-uart6-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x009c, PIN_INPUT_PULLUP, 3) /* (AD24) GPMC0_WAIT1.UART6_RXD */
+ AM62PX_IOPAD(0x0244, PIN_OUTPUT, 1) /* (D24) MMC1_SDWP.UART6_TXD */
+ >;
+ };
+
+ pinctrl_usb1: main-usb1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */
+ >;
+ };
+
+ pinctrl_ov5640: main-ov5640-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0028, PIN_OUTPUT, 7) /* (N20) OSPI0_D7.GPIO0_10 */
+ AM62PX_IOPAD(0x0054, PIN_OUTPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */
+ AM62PX_IOPAD(0x0058, PIN_OUTPUT, 7) /* (W25) GPMC0_AD7.GPIO0_22 */
+ >;
+ };
+
+ pinctrl_pca9534: main-pca9534-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01f0, PIN_INPUT, 7) /* (C25) EXT_REFCLK1.GPIO1_30 */
+ >;
+ };
+
+ pinctrl_sd1_vmmc: main-sd1-vmmc-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */
+ AM62PX_IOPAD(0x00d8, PIN_OUTPUT, 7) /* (AE22) VOUT0_DATA8.GPIO0_53 */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_sd1_vqmmc: main-sd1-vqmmc-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (AE21) VOUT0_DATA11.GPIO0_56 */
+ >;
+ bootph-all;
+ };
+};
+
+&main_spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ ti,pindir-d0-out-d1-in;
+ cs-gpios = <&main_gpio1 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&main_uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&main_uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&sdhci1 {
+ /* SD Card */
+ vmmc-supply = <®_sdhc1_vmmc>;
+ vqmmc-supply = <®_sdhc1_vqmmc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1>;
+ disable-wp;
+ bootph-all;
+ status="okay";
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&usb0 {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ status = "okay";
+};
+
+&usbss0 {
+ status = "okay";
+};
+
+&usbss1 {
+ status = "okay";
+};
projects / thirdparty / kernel / linux.git / commitdiff
