DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3
endef
+define U-Boot/mt7981_cudy_wr3000h-v1
+ NAME:=Cudy WR3000H v1
+ BUILD_SUBTARGET:=filogic
+ BUILD_DEVICES:=cudy_wr3000h-v1-ubootmod
+ UBOOT_CONFIG:=mt7981_cudy_wr3000h-v1
+ UBOOT_IMAGE:=u-boot.fip
+ BL2_BOOTDEV:=cudy
+ BL2_SOC:=mt7981
+ BL2_DDRTYPE:=ddr3
+ DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3
+endef
+
define U-Boot/mt7981_cudy_wr3000p-v1
NAME:=Cudy WR3000P v1
BUILD_SUBTARGET:=filogic
mt7981_cudy_wbr3000uax-v1 \
mt7981_cudy_wr3000e-v1 \
mt7981_cudy_wr3000s-v1 \
+ mt7981_cudy_wr3000h-v1 \
mt7981_cudy_wr3000p-v1 \
mt7981_gatonetworks_gdsp \
mt7981_glinet_gl-mt2500 \
--- /dev/null
+--- /dev/null
++++ b/configs/mt7981_cudy_wr3000h-v1_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cudy-wr3000h-v1"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cudy-wr3000h-v1.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/cudy_wr3000h-v1_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cudy-wr3000h-v1.dts
+@@ -0,0 +1,148 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ model = "Cudy WR3000H v1";
++ compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++ chosen {
++ stdout-path = &uart0;
++ tick-timer = &timer0;
++ };
++
++ memory@40000000 {
++ device_type = "memory";
++ reg = <0x40000000 0x10000000>;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++
++ button-reset {
++ label = "reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++
++ led_status_white {
++ label = "white:status";
++ gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++ };
++
++ led_wan_white {
++ label = "white:wan";
++ gpios = <&pio 35 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++ð {
++ status = "okay";
++ mediatek,gmac-id = <0>;
++ phy-mode = "2500base-x";
++ mediatek,switch = "mt7531";
++ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
++
++ fixed-link {
++ speed = <2500>;
++ full-duplex;
++ };
++};
++
++&pio {
++ spi_flash_pins: spi0-pins-func-1 {
++ mux {
++ function = "flash";
++ groups = "spi0", "spi0_wp_hold";
++ };
++
++ conf-pu {
++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++ drive-strength = <MTK_DRIVE_8mA>;
++ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++ };
++
++ conf-pd {
++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++ drive-strength = <MTK_DRIVE_8mA>;
++ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++ };
++ };
++};
++
++&spi0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi_flash_pins>;
++ status = "okay";
++ must_tx;
++ enhance_timing;
++ dma_ext;
++ ipm_design;
++ support_quad;
++ tick_dly = <2>;
++ sample_sel = <0>;
++
++ spi_nand@0 {
++ compatible = "spi-nand";
++ reg = <0>;
++ spi-max-frequency = <52000000>;
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "bl2";
++ reg = <0x0 0x100000>;
++ };
++
++ partition@100000 {
++ label = "u-boot-env";
++ reg = <0x100000 0x80000>;
++ };
++
++ partition@180000 {
++ label = "factory";
++ reg = <0x180000 0x200000>;
++ };
++
++ partition@380000 {
++ label = "bdinfo";
++ reg = <0x380000 0x40000>;
++ };
++
++ partition@3c0000 {
++ label = "fip";
++ reg = <0x3c0000 0x200000>;
++ };
++
++ partition@5c0000 {
++ label = "ubi";
++ reg = <0x5c0000 0x7a40000>;
++ compatible = "linux,ubi";
++ };
++ };
++ };
++};
++
++&uart0 {
++ mediatek,force-highspeed;
++ status = "okay";
++};
++
++&watchdog {
++ status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/cudy_wr3000h-v1_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=white:status
++bootled_rec=white:wan
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to NAND.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title \e[33m$ver\e[0m"
cudy,wbr3000uax-v1-ubootmod|\
cudy,wr3000e-v1-ubootmod|\
cudy,wr3000s-v1-ubootmod|\
+cudy,wr3000h-v1-ubootmod|\
cudy,wr3000p-v1-ubootmod|\
h3c,magic-nx30-pro|\
imou,hx21|\
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include "mt7981b-cudy-wr3000h-v1.dtsi"
+
+/ {
+ model = "Cudy WR3000H v1 (OpenWrt U-Boot layout)";
+ compatible = "cudy,wr3000h-v1-ubootmod", "mediatek,mt7981";
+
+ chosen {
+ bootargs = " root=/dev/fit0 rootwait";
+ rootdisk = <&ubi_rootdisk>;
+ };
+};
+
+&ubi {
+ reg = <0x5c0000 0x7a40000>;
+
+ volumes {
+ ubi_rootdisk: ubi-volume-fit {
+ volname = "fit";
+ };
+ };
+};
/dts-v1/;
-#include "mt7981b-cudy-wr3000-nand.dtsi"
+#include "mt7981b-cudy-wr3000h-v1.dtsi"
/ {
model = "Cudy WR3000H v1";
compatible = "cudy,wr3000h-v1", "mediatek,mt7981";
-
- aliases {
- label-mac-device = &gmac0;
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- serial0 = &uart0;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: led-status {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 5 GPIO_ACTIVE_LOW>;
- };
-
- led-internet {
- function = LED_FUNCTION_WAN_ONLINE;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 11 GPIO_ACTIVE_LOW>;
- };
-
- led-wps {
- function = LED_FUNCTION_WPS;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 9 GPIO_ACTIVE_LOW>;
- };
-
- led-wlan2g {
- function = LED_FUNCTION_WLAN_2GHZ;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- led-wlan5g {
- function = LED_FUNCTION_WLAN_5GHZ;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 7 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- led-lan1 {
- function = LED_FUNCTION_LAN;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 8 GPIO_ACTIVE_LOW>;
- };
-
- led-lan2 {
- function = LED_FUNCTION_LAN;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 10 GPIO_ACTIVE_LOW>;
- };
-
- led-lan3 {
- function = LED_FUNCTION_LAN;
- function-enumerator = <3>;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 12 GPIO_ACTIVE_LOW>;
- };
-
- led-lan4 {
- function = LED_FUNCTION_LAN;
- function-enumerator = <4>;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 13 GPIO_ACTIVE_LOW>;
- };
-
- led-wan {
- function = LED_FUNCTION_WAN;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&pio 35 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ð {
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "2500base-x";
- phy-handle = <&phy6>;
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_bdinfo_de00 1>;
- label = "wan";
- };
-};
-
-&mdio_bus {
- /* We need to have the reset GPIO on the MDIO bus node,
- * otherwise the PHY would be held in reset during PHY detection */
- reset-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
- reset-delay-us = <100000>;
- reset-post-delay-us = <100000>;
-
- phy6: ethernet-phy@6 {
- /* Either Realtek RTL8221B-VB-CG or Motorcomm YT8821,
- * depending on HW revision */
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <6>;
- };
};
-
-&switch {
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan4";
- };
-
- port@1 {
- reg = <1>;
- label = "lan3";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan1";
- };
-
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "2500base-x";
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- pause;
- };
- };
- };
-};
-
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "mt7981b-cudy-wr3000-nand.dtsi"
+
+/ {
+ aliases {
+ label-mac-device = &gmac0;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: led-status {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-internet {
+ function = LED_FUNCTION_WAN_ONLINE;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-wps {
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-wlan2g {
+ function = LED_FUNCTION_WLAN_2GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led-wlan5g {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led-lan1 {
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-lan2 {
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-lan3 {
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-lan4 {
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <4>;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-wan {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð {
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "2500base-x";
+ phy-handle = <&phy6>;
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_bdinfo_de00 1>;
+ label = "wan";
+ };
+};
+
+&mdio_bus {
+ /* We need to have the reset GPIO on the MDIO bus node,
+ * otherwise the PHY would be held in reset during PHY detection */
+ reset-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <100000>;
+ reset-post-delay-us = <100000>;
+
+ phy6: ethernet-phy@6 {
+ /* Either Realtek RTL8221B-VB-CG or Motorcomm YT8821,
+ * depending on HW revision */
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <6>;
+ };
+};
+
+&switch {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
+
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;
cudy,wr3000h-v1|\
+cudy,wr3000h-v1-ubootmod|\
cudy,wr3000p-v1|\
cudy,wr3000p-v1-ubootmod)
ucidef_set_led_netdev "lan1" "lan1" "white:lan-1" "lan1" "link tx rx"
cudy,wr3000s-v1|\
cudy,wr3000s-v1-ubootmod|\
cudy,wr3000h-v1|\
+ cudy,wr3000h-v1-ubootmod|\
cudy,wr3000p-v1|\
cudy,wr3000p-v1-ubootmod|\
cudy,wr3000-v1)
cudy,wbr3000uax-v1-ubootmod|\
cudy,wr3000e-v1-ubootmod|\
cudy,wr3000s-v1-ubootmod|\
+ cudy,wr3000h-v1-ubootmod|\
cudy,wr3000p-v1-ubootmod|\
gatonetworks,gdsp|\
h3c,magic-nx30-pro|\
cudy,wbr3000uax-v1-ubootmod|\
cudy,wr3000e-v1-ubootmod|\
cudy,wr3000s-v1-ubootmod|\
+ cudy,wr3000h-v1-ubootmod|\
cudy,wr3000p-v1-ubootmod|\
gatonetworks,gdsp|\
h3c,magic-nx30-pro|\
endef
TARGET_DEVICES += cudy_wr3000h-v1
+define Device/cudy_wr3000h-v1-ubootmod
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := WR3000H
+ DEVICE_VARIANT := v1 (OpenWrt U-Boot layout)
+ DEVICE_DTS := mt7981b-cudy-wr3000h-v1-ubootmod
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-phy-motorcomm
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7981-bl2 cudy-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot cudy_wr3000h-v1
+endef
+TARGET_DEVICES += cudy_wr3000h-v1-ubootmod
+
define Device/cudy_wr3000p-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000P
projects / thirdparty / openwrt.git / commitdiff
