arm64: zynqmp: Remove no-1-8-v property to add UHS-I support for SD

This patch removes the property 'no-1-8-v' to add support
for Running SD in UHS-I mode. This will enable SD to operate
at 1.8V and maximum of 200MHz frequency if the SD card supports
the same

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 53c1a3d0c70916c62fb027157bb95f87fddb241a..709156224a4bc7d440a6bcaa4037aa0628514956 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -183,7 +183,6 @@
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_sdhci1_default>;
-       no-1-8-v;       /* for 1.0 silicon */
        xlnx,mio_bank = <1>;
 };
 

diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
index 87f088cb36ff9aff6c3d651dff71598c830b7493..c088c1bcda9160bed1c8dd648acf4446139aba9d 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102.dts
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -895,7 +895,6 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_sdhci1_default>;
-       no-1-8-v;       /* for 1.0 silicon */
        xlnx,mio_bank = <1>;
 };
 

diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 70d296bedf0ca763ca030865b13e69dcbd280b60..4f1798b4059adfdbcbe3d50b3091f6f25de43cfb 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -430,7 +430,6 @@
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_sdhci1_default>;
-       no-1-8-v;
        xlnx,mio_bank = <1>;
 };
 

diff --git a/arch/arm/dts/zynqmp-zcu106.dts b/arch/arm/dts/zynqmp-zcu106.dts
index faf8cadba2f42f86d052be60bbf56bdfa8ecbf9b..9e2193fe2d192adb50a47ca5bc70f62a9009b8c5 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu106.dts
+++ b/arch/arm/dts/zynqmp-zcu106.dts
@@ -600,7 +600,6 @@
 /* SD1 with level shifter */
 &sdhci1 {
        status = "okay";
-       no-1-8-v;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_sdhci1_default>;
        xlnx,mio_bank = <1>;