arm64: dts: qcom: ipq5018: Add crypto nodes

IPQ5018 uses Qualcomm QCE crypto engine v5.1 which is already supported.
So let's add the dts nodes for its DMA v1.7.4 and QCE itself.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-ipq5018-crypto-v3-1-b9cd9b0ef147@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 7363bb6dcd68a7956b0e43dcaed71fd97c727584..08bea072cf11d5fb69f3ef3af9e55c834add3a4e 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -348,6 +348,36 @@
                        #thermal-sensor-cells = <1>;
                };
 
+               cryptobam: dma-controller@704000 {
+                       compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+                       reg = <0x00704000 0x20000>;
+                       interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+
+                       clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+                       clock-names = "bam_clk";
+
+                       #dma-cells = <1>;
+                       qcom,ee = <1>;
+                       qcom,controlled-remotely;
+               };
+
+               crypto: crypto@73a000 {
+                       compatible = "qcom,crypto-v5.1";
+                       reg = <0x0073a000 0x6000>;
+
+                       clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+                                <&gcc GCC_CRYPTO_AXI_CLK>,
+                                <&gcc GCC_CRYPTO_CLK>;
+                       clock-names = "iface",
+                                     "bus",
+                                     "core";
+
+                       dmas = <&cryptobam 2>,
+                              <&cryptobam 3>;
+                       dma-names = "rx",
+                                   "tx";
+               };
+
                tlmm: pinctrl@1000000 {
                        compatible = "qcom,ipq5018-tlmm";
                        reg = <0x01000000 0x300000>;