--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Tom Lendacky <thomas.lendacky@amd.com>
+Date: Tue, 20 Feb 2018 15:22:05 -0600
+Subject: amd-xgbe: Restore PCI interrupt enablement setting on resume
+
+From: Tom Lendacky <thomas.lendacky@amd.com>
+
+
+[ Upstream commit cfd092f2db8b4b6727e1c03ef68a7842e1023573 ]
+
+After resuming from suspend, the PCI device support must re-enable the
+interrupt setting so that interrupts are actually delivered.
+
+Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
++++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+@@ -426,6 +426,8 @@ static int xgbe_pci_resume(struct pci_de
+ struct net_device *netdev = pdata->netdev;
+ int ret = 0;
+
++ XP_IOWRITE(pdata, XP_INT_EN, 0x1fffff);
++
+ pdata->lpm_ctrl &= ~MDIO_CTRL1_LPOWER;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, pdata->lpm_ctrl);
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Xin Long <lucien.xin@gmail.com>
+Date: Mon, 12 Feb 2018 17:15:40 +0800
+Subject: bridge: check brport attr show in brport_show
+
+From: Xin Long <lucien.xin@gmail.com>
+
+
+[ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ]
+
+Now br_sysfs_if file flush doesn't have attr show. To read it will
+cause kernel panic after users chmod u+r this file.
+
+Xiong found this issue when running the commands:
+
+ ip link add br0 type bridge
+ ip link add type veth
+ ip link set veth0 master br0
+ chmod u+r /sys/devices/virtual/net/veth0/brport/flush
+ timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush
+
+kernel crashed with NULL a pointer dereference call trace.
+
+This patch is to fix it by return -EINVAL when brport_attr->show
+is null, just the same as the check for brport_attr->store in
+brport_store().
+
+Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table")
+Reported-by: Xiong Zhou <xzhou@redhat.com>
+Signed-off-by: Xin Long <lucien.xin@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/bridge/br_sysfs_if.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/net/bridge/br_sysfs_if.c
++++ b/net/bridge/br_sysfs_if.c
+@@ -235,6 +235,9 @@ static ssize_t brport_show(struct kobjec
+ struct brport_attribute *brport_attr = to_brport_attr(attr);
+ struct net_bridge_port *p = to_brport(kobj);
+
++ if (!brport_attr->show)
++ return -EINVAL;
++
+ return brport_attr->show(p, buf);
+ }
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Ido Schimmel <idosch@mellanox.com>
+Date: Sun, 25 Feb 2018 21:59:06 +0200
+Subject: bridge: Fix VLAN reference count problem
+
+From: Ido Schimmel <idosch@mellanox.com>
+
+
+[ Upstream commit 0e5a82efda872c2469c210957d7d4161ef8f4391 ]
+
+When a VLAN is added on a port, a reference is taken on the
+corresponding master VLAN entry. If it does not already exist, then it
+is created and a reference taken.
+
+However, in the second case a reference is not really taken when
+CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by
+refcount_inc_not_zero().
+
+Fix this by using refcount_set() on a newly created master VLAN entry.
+
+Fixes: 251277598596 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t")
+Signed-off-by: Ido Schimmel <idosch@mellanox.com>
+Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/bridge/br_vlan.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/net/bridge/br_vlan.c
++++ b/net/bridge/br_vlan.c
+@@ -157,6 +157,8 @@ static struct net_bridge_vlan *br_vlan_g
+ masterv = br_vlan_find(vg, vid);
+ if (WARN_ON(!masterv))
+ return NULL;
++ refcount_set(&masterv->refcnt, 1);
++ return masterv;
+ }
+ refcount_inc(&masterv->refcnt);
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Paolo Abeni <pabeni@redhat.com>
+Date: Mon, 5 Feb 2018 22:23:01 +0100
+Subject: cls_u32: fix use after free in u32_destroy_key()
+
+From: Paolo Abeni <pabeni@redhat.com>
+
+
+[ Upstream commit d7cdee5ea8d28ae1b6922deb0c1badaa3aa0ef8c ]
+
+Li Shuang reported an Oops with cls_u32 due to an use-after-free
+in u32_destroy_key(). The use-after-free can be triggered with:
+
+dev=lo
+tc qdisc add dev $dev root handle 1: htb default 10
+tc filter add dev $dev parent 1: prio 5 handle 1: protocol ip u32 divisor 256
+tc filter add dev $dev protocol ip parent 1: prio 5 u32 ht 800:: match ip dst\
+ 10.0.0.0/8 hashkey mask 0x0000ff00 at 16 link 1:
+tc qdisc del dev $dev root
+
+Which causes the following kasan splat:
+
+ ==================================================================
+ BUG: KASAN: use-after-free in u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
+ Read of size 4 at addr ffff881b83dae618 by task kworker/u48:5/571
+
+ CPU: 17 PID: 571 Comm: kworker/u48:5 Not tainted 4.15.0+ #87
+ Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
+ Workqueue: tc_filter_workqueue u32_delete_key_freepf_work [cls_u32]
+ Call Trace:
+ dump_stack+0xd6/0x182
+ ? dma_virt_map_sg+0x22e/0x22e
+ print_address_description+0x73/0x290
+ kasan_report+0x277/0x360
+ ? u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
+ u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
+ u32_delete_key_freepf_work+0x1c/0x30 [cls_u32]
+ process_one_work+0xae0/0x1c80
+ ? sched_clock+0x5/0x10
+ ? pwq_dec_nr_in_flight+0x3c0/0x3c0
+ ? _raw_spin_unlock_irq+0x29/0x40
+ ? trace_hardirqs_on_caller+0x381/0x570
+ ? _raw_spin_unlock_irq+0x29/0x40
+ ? finish_task_switch+0x1e5/0x760
+ ? finish_task_switch+0x208/0x760
+ ? preempt_notifier_dec+0x20/0x20
+ ? __schedule+0x839/0x1ee0
+ ? check_noncircular+0x20/0x20
+ ? firmware_map_remove+0x73/0x73
+ ? find_held_lock+0x39/0x1c0
+ ? worker_thread+0x434/0x1820
+ ? lock_contended+0xee0/0xee0
+ ? lock_release+0x1100/0x1100
+ ? init_rescuer.part.16+0x150/0x150
+ ? retint_kernel+0x10/0x10
+ worker_thread+0x216/0x1820
+ ? process_one_work+0x1c80/0x1c80
+ ? lock_acquire+0x1a5/0x540
+ ? lock_downgrade+0x6b0/0x6b0
+ ? sched_clock+0x5/0x10
+ ? lock_release+0x1100/0x1100
+ ? compat_start_thread+0x80/0x80
+ ? do_raw_spin_trylock+0x190/0x190
+ ? _raw_spin_unlock_irq+0x29/0x40
+ ? trace_hardirqs_on_caller+0x381/0x570
+ ? _raw_spin_unlock_irq+0x29/0x40
+ ? finish_task_switch+0x1e5/0x760
+ ? finish_task_switch+0x208/0x760
+ ? preempt_notifier_dec+0x20/0x20
+ ? __schedule+0x839/0x1ee0
+ ? kmem_cache_alloc_trace+0x143/0x320
+ ? firmware_map_remove+0x73/0x73
+ ? sched_clock+0x5/0x10
+ ? sched_clock_cpu+0x18/0x170
+ ? find_held_lock+0x39/0x1c0
+ ? schedule+0xf3/0x3b0
+ ? lock_downgrade+0x6b0/0x6b0
+ ? __schedule+0x1ee0/0x1ee0
+ ? do_wait_intr_irq+0x340/0x340
+ ? do_raw_spin_trylock+0x190/0x190
+ ? _raw_spin_unlock_irqrestore+0x32/0x60
+ ? process_one_work+0x1c80/0x1c80
+ ? process_one_work+0x1c80/0x1c80
+ kthread+0x312/0x3d0
+ ? kthread_create_worker_on_cpu+0xc0/0xc0
+ ret_from_fork+0x3a/0x50
+
+ Allocated by task 1688:
+ kasan_kmalloc+0xa0/0xd0
+ __kmalloc+0x162/0x380
+ u32_change+0x1220/0x3c9e [cls_u32]
+ tc_ctl_tfilter+0x1ba6/0x2f80
+ rtnetlink_rcv_msg+0x4f0/0x9d0
+ netlink_rcv_skb+0x124/0x320
+ netlink_unicast+0x430/0x600
+ netlink_sendmsg+0x8fa/0xd60
+ sock_sendmsg+0xb1/0xe0
+ ___sys_sendmsg+0x678/0x980
+ __sys_sendmsg+0xc4/0x210
+ do_syscall_64+0x232/0x7f0
+ return_from_SYSCALL_64+0x0/0x75
+
+ Freed by task 112:
+ kasan_slab_free+0x71/0xc0
+ kfree+0x114/0x320
+ rcu_process_callbacks+0xc3f/0x1600
+ __do_softirq+0x2bf/0xc06
+
+ The buggy address belongs to the object at ffff881b83dae600
+ which belongs to the cache kmalloc-4096 of size 4096
+ The buggy address is located 24 bytes inside of
+ 4096-byte region [ffff881b83dae600, ffff881b83daf600)
+ The buggy address belongs to the page:
+ page:ffffea006e0f6a00 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
+ flags: 0x17ffffc0008100(slab|head)
+ raw: 0017ffffc0008100 0000000000000000 0000000000000000 0000000100070007
+ raw: dead000000000100 dead000000000200 ffff880187c0e600 0000000000000000
+ page dumped because: kasan: bad access detected
+
+ Memory state around the buggy address:
+ ffff881b83dae500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+ ffff881b83dae580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+ >ffff881b83dae600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+ ^
+ ffff881b83dae680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+ ffff881b83dae700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+ ==================================================================
+
+The problem is that the htnode is freed before the linked knodes and the
+latter will try to access the first at u32_destroy_key() time.
+This change addresses the issue using the htnode refcnt to guarantee
+the correct free order. While at it also add a RCU annotation,
+to keep sparse happy.
+
+v1 -> v2: use rtnl_derefence() instead of RCU read locks
+v2 -> v3:
+ - don't check refcnt in u32_destroy_hnode()
+ - cleaned-up u32_destroy() implementation
+ - cleaned-up code comment
+v3 -> v4:
+ - dropped unneeded comment
+
+Reported-by: Li Shuang <shuali@redhat.com>
+Fixes: c0d378ef1266 ("net_sched: use tcf_queue_work() in u32 filter")
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sched/cls_u32.c | 21 +++++++++++----------
+ 1 file changed, 11 insertions(+), 10 deletions(-)
+
+--- a/net/sched/cls_u32.c
++++ b/net/sched/cls_u32.c
+@@ -398,10 +398,12 @@ static int u32_init(struct tcf_proto *tp
+ static int u32_destroy_key(struct tcf_proto *tp, struct tc_u_knode *n,
+ bool free_pf)
+ {
++ struct tc_u_hnode *ht = rtnl_dereference(n->ht_down);
++
+ tcf_exts_destroy(&n->exts);
+ tcf_exts_put_net(&n->exts);
+- if (n->ht_down)
+- n->ht_down->refcnt--;
++ if (ht && --ht->refcnt == 0)
++ kfree(ht);
+ #ifdef CONFIG_CLS_U32_PERF
+ if (free_pf)
+ free_percpu(n->pf);
+@@ -649,16 +651,15 @@ static void u32_destroy(struct tcf_proto
+
+ hlist_del(&tp_c->hnode);
+
+- for (ht = rtnl_dereference(tp_c->hlist);
+- ht;
+- ht = rtnl_dereference(ht->next)) {
+- ht->refcnt--;
+- u32_clear_hnode(tp, ht);
+- }
+-
+ while ((ht = rtnl_dereference(tp_c->hlist)) != NULL) {
++ u32_clear_hnode(tp, ht);
+ RCU_INIT_POINTER(tp_c->hlist, ht->next);
+- kfree_rcu(ht, rcu);
++
++ /* u32_destroy_key() will later free ht for us, if it's
++ * still referenced by some knode
++ */
++ if (--ht->refcnt == 0)
++ kfree_rcu(ht, rcu);
+ }
+
+ kfree(tp_c);
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
+Date: Sun, 4 Feb 2018 18:07:10 -0800
+Subject: doc: Change the min default value of tcp_wmem/tcp_rmem.
+
+From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
+
+
+[ Upstream commit a61a86f8db92923a2a4c857c49a795bcae754497 ]
+
+The SK_MEM_QUANTUM was changed from PAGE_SIZE to 4096. And the
+tcp_wmem/tcp_rmem min default values are 4096.
+
+Fixes: bd68a2a854ad ("net: set SK_MEM_QUANTUM to 4096")
+Cc: Eric Dumazet <edumazet@google.com>
+Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ Documentation/networking/ip-sysctl.txt | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/Documentation/networking/ip-sysctl.txt
++++ b/Documentation/networking/ip-sysctl.txt
+@@ -508,7 +508,7 @@ tcp_rmem - vector of 3 INTEGERs: min, de
+ min: Minimal size of receive buffer used by TCP sockets.
+ It is guaranteed to each TCP socket, even under moderate memory
+ pressure.
+- Default: 1 page
++ Default: 4K
+
+ default: initial size of receive buffer used by TCP sockets.
+ This value overrides net.core.rmem_default used by other protocols.
+@@ -666,7 +666,7 @@ tcp_window_scaling - BOOLEAN
+ tcp_wmem - vector of 3 INTEGERs: min, default, max
+ min: Amount of memory reserved for send buffers for TCP sockets.
+ Each TCP socket has rights to use it due to fact of its birth.
+- Default: 1 page
++ Default: 4K
+
+ default: initial size of send buffer used by TCP sockets. This
+ value overrides net.core.wmem_default used by other protocols.
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Stefano Brivio <sbrivio@redhat.com>
+Date: Thu, 15 Feb 2018 09:46:03 +0100
+Subject: fib_semantics: Don't match route with mismatching tclassid
+
+From: Stefano Brivio <sbrivio@redhat.com>
+
+
+[ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ]
+
+In fib_nh_match(), if output interface or gateway are passed in
+the FIB configuration, we don't have to check next hops of
+multipath routes to conclude whether we have a match or not.
+
+However, we might still have routes with different realms
+matching the same output interface and gateway configuration,
+and this needs to cause the match to fail. Otherwise the first
+route inserted in the FIB will match, regardless of the realms:
+
+ # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2
+ # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4
+ # ip route list table 1234
+ 1.1.1.1 dev eth0 scope link realms 1/2
+ 1.1.1.1 dev eth0 scope link realms 3/4
+ # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4
+ # ip route list table 1234
+ 1.1.1.1 dev ens3 scope link realms 3/4
+
+whereas route with realms 3/4 should have been deleted instead.
+
+Explicitly check for fc_flow passed in the FIB configuration
+(this comes from RTA_FLOW extracted by rtm_to_fib_config()) and
+fail matching if it differs from nh_tclassid.
+
+The handling of RTA_FLOW for multipath routes later in
+fib_nh_match() is still needed, as we can have multiple RTA_FLOW
+attributes that need to be matched against the tclassid of each
+next hop.
+
+v2: Check that fc_flow is set before discarding the match, so
+ that the user can still select the first matching rule by
+ not specifying any realm, as suggested by David Ahern.
+
+Reported-by: Jianlin Shi <jishi@redhat.com>
+Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
+Acked-by: David Ahern <dsahern@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/fib_semantics.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/net/ipv4/fib_semantics.c
++++ b/net/ipv4/fib_semantics.c
+@@ -654,6 +654,11 @@ int fib_nh_match(struct fib_config *cfg,
+ fi->fib_nh, cfg, extack))
+ return 1;
+ }
++#ifdef CONFIG_IP_ROUTE_CLASSID
++ if (cfg->fc_flow &&
++ cfg->fc_flow != fi->fib_nh->nh_tclassid)
++ return 1;
++#endif
+ if ((!cfg->fc_oif || cfg->fc_oif == fi->fib_nh->nh_oif) &&
+ (!cfg->fc_gw || cfg->fc_gw == fi->fib_nh->nh_gw))
+ return 0;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Denis Du <dudenis2000@yahoo.ca>
+Date: Sat, 24 Feb 2018 16:51:42 -0500
+Subject: hdlc_ppp: carrier detect ok, don't turn off negotiation
+
+From: Denis Du <dudenis2000@yahoo.ca>
+
+
+[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ]
+
+Sometimes when physical lines have a just good noise to make the protocol
+handshaking fail, but the carrier detect still good. Then after remove of
+the noise, nobody will trigger this protocol to be start again to cause
+the link to never come back. The fix is when the carrier is still on, not
+terminate the protocol handshaking.
+
+Signed-off-by: Denis Du <dudenis2000@yahoo.ca>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/wan/hdlc_ppp.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wan/hdlc_ppp.c
++++ b/drivers/net/wan/hdlc_ppp.c
+@@ -574,7 +574,10 @@ static void ppp_timer(unsigned long arg)
+ ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
+ 0, NULL);
+ proto->restart_counter--;
+- } else
++ } else if (netif_carrier_ok(proto->dev))
++ ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
++ 0, NULL);
++ else
+ ppp_cp_event(proto->dev, proto->pid, TO_BAD, 0, 0,
+ 0, NULL);
+ break;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Thu, 22 Feb 2018 16:55:34 +0100
+Subject: ipv6 sit: work around bogus gcc-8 -Wrestrict warning
+
+From: Arnd Bergmann <arnd@arndb.de>
+
+
+[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ]
+
+gcc-8 has a new warning that detects overlapping input and output arguments
+in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
+which is actually correct:
+
+net/ipv6/sit.c: In function 'sit_init_net':
+net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
+
+The problem here is that the logic detecting the memcpy() arguments finds them
+to be the same, but the conditional that tests for the input and output of
+ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.
+
+We know that netdev_priv(t->dev) is the same as t for a tunnel device,
+and comparing "dev" directly here lets the compiler figure out as well
+that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
+it no longer warns.
+
+This code is old, so Cc stable to make sure that we don't get the warning
+for older kernels built with new gcc.
+
+Cc: Martin Sebor <msebor@gmail.com>
+Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv6/sit.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/net/ipv6/sit.c
++++ b/net/ipv6/sit.c
+@@ -176,7 +176,7 @@ static void ipip6_tunnel_clone_6rd(struc
+ #ifdef CONFIG_IPV6_SIT_6RD
+ struct ip_tunnel *t = netdev_priv(dev);
+
+- if (t->dev == sitn->fb_tunnel_dev) {
++ if (dev == sitn->fb_tunnel_dev) {
+ ipv6_addr_set(&t->ip6rd.prefix, htonl(0x20020000), 0, 0, 0);
+ t->ip6rd.relay_prefix = 0;
+ t->ip6rd.prefixlen = 16;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Ido Schimmel <idosch@mellanox.com>
+Date: Sat, 17 Feb 2018 00:30:44 +0100
+Subject: mlxsw: spectrum_router: Do not unconditionally clear route offload indication
+
+From: Ido Schimmel <idosch@mellanox.com>
+
+
+[ Upstream commit d1c95af366961101819f07e3c64d44f3be7f0367 ]
+
+When mlxsw replaces (or deletes) a route it removes the offload
+indication from the replaced route. This is problematic for IPv4 routes,
+as the offload indication is stored in the fib_info which is usually
+shared between multiple routes.
+
+Instead of unconditionally clearing the offload indication, only clear
+it if no other route is using the fib_info.
+
+Fixes: 3984d1a89fe7 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags")
+Signed-off-by: Ido Schimmel <idosch@mellanox.com>
+Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
+Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
+Signed-off-by: Jiri Pirko <jiri@mellanox.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
++++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+@@ -3032,6 +3032,9 @@ mlxsw_sp_fib4_entry_offload_unset(struct
+ struct mlxsw_sp_nexthop_group *nh_grp = fib_entry->nh_group;
+ int i;
+
++ if (!list_is_singular(&nh_grp->fib_list))
++ return;
++
+ for (i = 0; i < nh_grp->count; i++) {
+ struct mlxsw_sp_nexthop *nh = &nh_grp->nexthops[i];
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Jiri Pirko <jiri@mellanox.com>
+Date: Tue, 13 Feb 2018 11:22:42 +0100
+Subject: mlxsw: spectrum_router: Fix error path in mlxsw_sp_vr_create
+
+From: Jiri Pirko <jiri@mellanox.com>
+
+
+[ Upstream commit 0f2d2b2736b08dafa3bde31d048750fbc8df3a31 ]
+
+Since mlxsw_sp_fib_create() and mlxsw_sp_mr_table_create()
+use ERR_PTR macro to propagate int err through return of a pointer,
+the return value is not NULL in case of failure. So if one
+of the calls fails, one of vr->fib4, vr->fib6 or vr->mr4_table
+is not NULL and mlxsw_sp_vr_is_used wrongly assumes
+that vr is in use which leads to crash like following one:
+
+[ 1293.949291] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c9
+[ 1293.952729] IP: mlxsw_sp_mr_table_flush+0x15/0x70 [mlxsw_spectrum]
+
+Fix this by using local variables to hold the pointers and set vr->*
+only in case everything went fine.
+
+Fixes: 76610ebbde18 ("mlxsw: spectrum_router: Refactor virtual router handling")
+Fixes: a3d9bc506d64 ("mlxsw: spectrum_router: Extend virtual routers with IPv6 support")
+Fixes: d42b0965b1d4 ("mlxsw: spectrum_router: Add multicast routes notification handling functionality")
+Signed-off-by: Jiri Pirko <jiri@mellanox.com>
+Reviewed-by: Ido Schimmel <idosch@mellanox.com>
+Signed-off-by: Jiri Pirko <jiri@mellanox.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 19 ++++++++++--------
+ 1 file changed, 11 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
++++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+@@ -729,26 +729,29 @@ static struct mlxsw_sp_fib *mlxsw_sp_vr_
+ static struct mlxsw_sp_vr *mlxsw_sp_vr_create(struct mlxsw_sp *mlxsw_sp,
+ u32 tb_id)
+ {
++ struct mlxsw_sp_fib *fib4;
++ struct mlxsw_sp_fib *fib6;
+ struct mlxsw_sp_vr *vr;
+ int err;
+
+ vr = mlxsw_sp_vr_find_unused(mlxsw_sp);
+ if (!vr)
+ return ERR_PTR(-EBUSY);
+- vr->fib4 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV4);
+- if (IS_ERR(vr->fib4))
+- return ERR_CAST(vr->fib4);
+- vr->fib6 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV6);
+- if (IS_ERR(vr->fib6)) {
+- err = PTR_ERR(vr->fib6);
++ fib4 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV4);
++ if (IS_ERR(fib4))
++ return ERR_CAST(fib4);
++ fib6 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV6);
++ if (IS_ERR(fib6)) {
++ err = PTR_ERR(fib6);
+ goto err_fib6_create;
+ }
++ vr->fib4 = fib4;
++ vr->fib6 = fib6;
+ vr->tb_id = tb_id;
+ return vr;
+
+ err_fib6_create:
+- mlxsw_sp_fib_destroy(vr->fib4);
+- vr->fib4 = NULL;
++ mlxsw_sp_fib_destroy(fib4);
+ return ERR_PTR(err);
+ }
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Shalom Toledo <shalomt@mellanox.com>
+Date: Thu, 1 Mar 2018 11:37:05 +0100
+Subject: mlxsw: spectrum_switchdev: Check success of FDB add operation
+
+From: Shalom Toledo <shalomt@mellanox.com>
+
+
+[ Upstream commit 0a8a1bf17e3af34f1f8d2368916a6327f8b3bfd5 ]
+
+Until now, we assumed that in case of error when adding FDB entries, the
+write operation will fail, but this is not the case. Instead, we need to
+check that the number of entries reported in the response is equal to
+the number of entries specified in the request.
+
+Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
+Reported-by: Ido Schimmel <idosch@mellanox.com>
+Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
+Reviewed-by: Ido Schimmel <idosch@mellanox.com>
+Signed-off-by: Jiri Pirko <jiri@mellanox.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 29 +++++++++++++--
+ 1 file changed, 27 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
++++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+@@ -1098,6 +1098,7 @@ static int __mlxsw_sp_port_fdb_uc_op(str
+ bool dynamic)
+ {
+ char *sfd_pl;
++ u8 num_rec;
+ int err;
+
+ sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
+@@ -1107,9 +1108,16 @@ static int __mlxsw_sp_port_fdb_uc_op(str
+ mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
+ mlxsw_reg_sfd_uc_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
+ mac, fid, action, local_port);
++ num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
+ err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
+- kfree(sfd_pl);
++ if (err)
++ goto out;
++
++ if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
++ err = -EBUSY;
+
++out:
++ kfree(sfd_pl);
+ return err;
+ }
+
+@@ -1134,6 +1142,7 @@ static int mlxsw_sp_port_fdb_uc_lag_op(s
+ bool adding, bool dynamic)
+ {
+ char *sfd_pl;
++ u8 num_rec;
+ int err;
+
+ sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
+@@ -1144,9 +1153,16 @@ static int mlxsw_sp_port_fdb_uc_lag_op(s
+ mlxsw_reg_sfd_uc_lag_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
+ mac, fid, MLXSW_REG_SFD_REC_ACTION_NOP,
+ lag_vid, lag_id);
++ num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
+ err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
+- kfree(sfd_pl);
++ if (err)
++ goto out;
+
++ if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
++ err = -EBUSY;
++
++out:
++ kfree(sfd_pl);
+ return err;
+ }
+
+@@ -1191,6 +1207,7 @@ static int mlxsw_sp_port_mdb_op(struct m
+ u16 fid, u16 mid, bool adding)
+ {
+ char *sfd_pl;
++ u8 num_rec;
+ int err;
+
+ sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
+@@ -1200,7 +1217,15 @@ static int mlxsw_sp_port_mdb_op(struct m
+ mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
+ mlxsw_reg_sfd_mc_pack(sfd_pl, 0, addr, fid,
+ MLXSW_REG_SFD_REC_ACTION_NOP, mid);
++ num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
+ err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
++ if (err)
++ goto out;
++
++ if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
++ err = -EBUSY;
++
++out:
+ kfree(sfd_pl);
+ return err;
+ }
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Wolfram Sang <wsa+renesas@sang-engineering.com>
+Date: Mon, 5 Feb 2018 21:10:01 +0100
+Subject: net: amd-xgbe: fix comparison to bitshift when dealing with a mask
+
+From: Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+
+[ Upstream commit a3276892db7a588bedc33168e502572008f714a9 ]
+
+Due to a typo, the mask was destroyed by a comparison instead of a bit
+shift.
+
+Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
+Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
++++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+@@ -595,7 +595,7 @@ isr_done:
+
+ reissue_mask = 1 << 0;
+ if (!pdata->per_channel_irq)
+- reissue_mask |= 0xffff < 4;
++ reissue_mask |= 0xffff << 4;
+
+ XP_IOWRITE(pdata, XP_INT_REISSUE_EN, reissue_mask);
+ }
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Grygorii Strashko <grygorii.strashko@ti.com>
+Date: Tue, 6 Feb 2018 19:17:06 -0600
+Subject: net: ethernet: ti: cpsw: fix net watchdog timeout
+
+From: Grygorii Strashko <grygorii.strashko@ti.com>
+
+
+[ Upstream commit 62f94c2101f35cd45775df00ba09bde77580e26a ]
+
+It was discovered that simple program which indefinitely sends 200b UDP
+packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network
+watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog
+timeout is triggered due to race between cpsw_ndo_start_xmit() and
+cpsw_tx_handler() [NAPI]
+
+cpsw_ndo_start_xmit()
+ if (unlikely(!cpdma_check_free_tx_desc(txch))) {
+ txq = netdev_get_tx_queue(ndev, q_idx);
+ netif_tx_stop_queue(txq);
+
+^^ as per [1] barier has to be used after set_bit() otherwise new value
+might not be visible to other cpus
+ }
+
+cpsw_tx_handler()
+ if (unlikely(netif_tx_queue_stopped(txq)))
+ netif_tx_wake_queue(txq);
+
+and when it happens ndev TX queue became disabled forever while driver's HW
+TX queue is empty.
+
+Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue()
+calls and double check for free TX descriptors after stopping ndev TX queue
+- if there are free TX descriptors wake up ndev TX queue.
+
+[1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.html
+Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
+Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/ti/cpsw.c | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/ti/cpsw.c
++++ b/drivers/net/ethernet/ti/cpsw.c
+@@ -1618,6 +1618,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(s
+ q_idx = q_idx % cpsw->tx_ch_num;
+
+ txch = cpsw->txv[q_idx].ch;
++ txq = netdev_get_tx_queue(ndev, q_idx);
+ ret = cpsw_tx_packet_submit(priv, skb, txch);
+ if (unlikely(ret != 0)) {
+ cpsw_err(priv, tx_err, "desc submit failed\n");
+@@ -1628,15 +1629,26 @@ static netdev_tx_t cpsw_ndo_start_xmit(s
+ * tell the kernel to stop sending us tx frames.
+ */
+ if (unlikely(!cpdma_check_free_tx_desc(txch))) {
+- txq = netdev_get_tx_queue(ndev, q_idx);
+ netif_tx_stop_queue(txq);
++
++ /* Barrier, so that stop_queue visible to other cpus */
++ smp_mb__after_atomic();
++
++ if (cpdma_check_free_tx_desc(txch))
++ netif_tx_wake_queue(txq);
+ }
+
+ return NETDEV_TX_OK;
+ fail:
+ ndev->stats.tx_dropped++;
+- txq = netdev_get_tx_queue(ndev, skb_get_queue_mapping(skb));
+ netif_tx_stop_queue(txq);
++
++ /* Barrier, so that stop_queue visible to other cpus */
++ smp_mb__after_atomic();
++
++ if (cpdma_check_free_tx_desc(txch))
++ netif_tx_wake_queue(txq);
++
+ return NETDEV_TX_BUSY;
+ }
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Jakub Kicinski <jakub.kicinski@netronome.com>
+Date: Mon, 12 Feb 2018 21:35:31 -0800
+Subject: net: fix race on decreasing number of TX queues
+
+From: Jakub Kicinski <jakub.kicinski@netronome.com>
+
+
+[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ]
+
+netif_set_real_num_tx_queues() can be called when netdev is up.
+That usually happens when user requests change of number of
+channels/rings with ethtool -L. The procedure for changing
+the number of queues involves resetting the qdiscs and setting
+dev->num_tx_queues to the new value. When the new value is
+lower than the old one, extra care has to be taken to ensure
+ordering of accesses to the number of queues vs qdisc reset.
+
+Currently the queues are reset before new dev->num_tx_queues
+is assigned, leaving a window of time where packets can be
+enqueued onto the queues going down, leading to a likely
+crash in the drivers, since most drivers don't check if TX
+skbs are assigned to an active queue.
+
+Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice")
+Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/core/dev.c | 11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -2343,8 +2343,11 @@ EXPORT_SYMBOL(netdev_set_num_tc);
+ */
+ int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
+ {
++ bool disabling;
+ int rc;
+
++ disabling = txq < dev->real_num_tx_queues;
++
+ if (txq < 1 || txq > dev->num_tx_queues)
+ return -EINVAL;
+
+@@ -2360,15 +2363,19 @@ int netif_set_real_num_tx_queues(struct
+ if (dev->num_tc)
+ netif_setup_tc(dev, txq);
+
+- if (txq < dev->real_num_tx_queues) {
++ dev->real_num_tx_queues = txq;
++
++ if (disabling) {
++ synchronize_net();
+ qdisc_reset_all_tx_gt(dev, txq);
+ #ifdef CONFIG_XPS
+ netif_reset_xps_queues_gt(dev, txq);
+ #endif
+ }
++ } else {
++ dev->real_num_tx_queues = txq;
+ }
+
+- dev->real_num_tx_queues = txq;
+ return 0;
+ }
+ EXPORT_SYMBOL(netif_set_real_num_tx_queues);
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Sabrina Dubroca <sd@queasysnail.net>
+Date: Mon, 26 Feb 2018 16:13:43 +0100
+Subject: net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68
+
+From: Sabrina Dubroca <sd@queasysnail.net>
+
+
+[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ]
+
+According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
+indicating an MTU below 68 should be rejected:
+
+ A host MUST never reduce its estimate of the Path MTU below 68
+ octets.
+
+and (talking about ICMP frag-needed's Next-Hop MTU field):
+
+ This field will never contain a value less than 68, since every
+ router "must be able to forward a datagram of 68 octets without
+ fragmentation".
+
+Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
+values, we can end up with a very large PMTU when (-1) is cast into u32.
+
+Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
+unsigned ints.
+
+Reported-by: Jianlin Shi <jishi@redhat.com>
+Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
+Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/route.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+--- a/net/ipv4/route.c
++++ b/net/ipv4/route.c
+@@ -128,10 +128,13 @@ static int ip_rt_redirect_silence __read
+ static int ip_rt_error_cost __read_mostly = HZ;
+ static int ip_rt_error_burst __read_mostly = 5 * HZ;
+ static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ;
+-static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20;
++static u32 ip_rt_min_pmtu __read_mostly = 512 + 20 + 20;
+ static int ip_rt_min_advmss __read_mostly = 256;
+
+ static int ip_rt_gc_timeout __read_mostly = RT_GC_TIMEOUT;
++
++static int ip_min_valid_pmtu __read_mostly = IPV4_MIN_MTU;
++
+ /*
+ * Interface to generic destination cache.
+ */
+@@ -2934,7 +2937,8 @@ static struct ctl_table ipv4_route_table
+ .data = &ip_rt_min_pmtu,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+- .proc_handler = proc_dointvec,
++ .proc_handler = proc_dointvec_minmax,
++ .extra1 = &ip_min_valid_pmtu,
+ },
+ {
+ .procname = "min_adv_mss",
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: David Ahern <dsahern@gmail.com>
+Date: Wed, 21 Feb 2018 11:00:54 -0800
+Subject: net: ipv4: Set addr_type in hash_keys for forwarded case
+
+From: David Ahern <dsahern@gmail.com>
+
+
+[ Upstream commit 1fe4b1184c2ae2bfbf9e8b14c9c0c1945c98f205 ]
+
+The result of the skb flow dissect is copied from keys to hash_keys to
+ensure only the intended data is hashed. The original L4 hash patch
+overlooked setting the addr_type for this case; add it.
+
+Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice")
+Reported-by: Ido Schimmel <idosch@idosch.org>
+Signed-off-by: David Ahern <dsahern@gmail.com>
+Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
+Reviewed-by: Ido Schimmel <idosch@mellanox.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/route.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/net/ipv4/route.c
++++ b/net/ipv4/route.c
+@@ -1832,6 +1832,8 @@ int fib_multipath_hash(const struct fib_
+ return skb_get_hash_raw(skb) >> 1;
+ memset(&hash_keys, 0, sizeof(hash_keys));
+ skb_flow_dissect_flow_keys(skb, &keys, flag);
++
++ hash_keys.control.addr_type = FLOW_DISSECTOR_KEY_IPV4_ADDRS;
+ hash_keys.addrs.v4addrs.src = keys.addrs.v4addrs.src;
+ hash_keys.addrs.v4addrs.dst = keys.addrs.v4addrs.dst;
+ hash_keys.ports.src = keys.ports.src;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Inbar Karmy <inbark@mellanox.com>
+Date: Thu, 7 Dec 2017 17:26:33 +0200
+Subject: net/mlx5e: Fix loopback self test when GRO is off
+
+From: Inbar Karmy <inbark@mellanox.com>
+
+
+[ Upstream commit ef7a3518f7dd4f4cf5e5b5358c93d1eb78df28fb ]
+
+When GRO is off, the transport header pointer in sk_buff is
+initialized to network's header.
+
+To find the udp header, instead of using udp_hdr() which assumes
+skb_network_header was set, manually calculate the udp header offset.
+
+Fixes: 0952da791c97 ("net/mlx5e: Add support for loopback selftest")
+Signed-off-by: Inbar Karmy <inbark@mellanox.com>
+Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c
++++ b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c
+@@ -216,7 +216,8 @@ mlx5e_test_loopback_validate(struct sk_b
+ if (iph->protocol != IPPROTO_UDP)
+ goto out;
+
+- udph = udp_hdr(skb);
++ /* Don't assume skb_transport_header() was set */
++ udph = (struct udphdr *)((u8 *)iph + 4 * iph->ihl);
+ if (udph->dest != htons(9))
+ goto out;
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Gal Pressman <galp@mellanox.com>
+Date: Wed, 20 Dec 2017 08:48:24 +0200
+Subject: net/mlx5e: Fix TCP checksum in LRO buffers
+
+From: Gal Pressman <galp@mellanox.com>
+
+
+[ Upstream commit 8babd44d2079079f9d5a4aca7005aed80236efe0 ]
+
+When receiving an LRO packet, the checksum field is set by the hardware
+to the checksum of the first coalesced packet. Obviously, this checksum
+is not valid for the merged LRO packet and should be fixed. We can use
+the CQE checksum which covers the checksum of the entire merged packet
+TCP payload to help us calculate the checksum incrementally.
+
+Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled
+and watching nstat checksum error counters (in addition to the obvious
+bandwidth drop caused by checksum errors).
+
+This bug is usually "hidden" since LRO packets would go through the
+CHECKSUM_UNNECESSARY flow which does not validate the packet checksum.
+
+It's important to note that previous to this patch, LRO packets provided
+with CHECKSUM_UNNECESSARY are indeed packets with a correct validated
+checksum (even though the checksum inside the TCP header is incorrect),
+since the hardware LRO aggregation is terminated upon receiving a packet
+with bad checksum.
+
+Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
+Signed-off-by: Gal Pressman <galp@mellanox.com>
+Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 47 +++++++++++++++++-------
+ 1 file changed, 34 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
++++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+@@ -36,6 +36,7 @@
+ #include <linux/tcp.h>
+ #include <linux/bpf_trace.h>
+ #include <net/busy_poll.h>
++#include <net/ip6_checksum.h>
+ #include "en.h"
+ #include "en_tc.h"
+ #include "eswitch.h"
+@@ -546,20 +547,33 @@ bool mlx5e_post_rx_mpwqes(struct mlx5e_r
+ return true;
+ }
+
++static void mlx5e_lro_update_tcp_hdr(struct mlx5_cqe64 *cqe, struct tcphdr *tcp)
++{
++ u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe);
++ u8 tcp_ack = (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA) ||
++ (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA);
++
++ tcp->check = 0;
++ tcp->psh = get_cqe_lro_tcppsh(cqe);
++
++ if (tcp_ack) {
++ tcp->ack = 1;
++ tcp->ack_seq = cqe->lro_ack_seq_num;
++ tcp->window = cqe->lro_tcp_win;
++ }
++}
++
+ static void mlx5e_lro_update_hdr(struct sk_buff *skb, struct mlx5_cqe64 *cqe,
+ u32 cqe_bcnt)
+ {
+ struct ethhdr *eth = (struct ethhdr *)(skb->data);
+ struct tcphdr *tcp;
+ int network_depth = 0;
++ __wsum check;
+ __be16 proto;
+ u16 tot_len;
+ void *ip_p;
+
+- u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe);
+- u8 tcp_ack = (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA) ||
+- (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA);
+-
+ skb->mac_len = ETH_HLEN;
+ proto = __vlan_get_protocol(skb, eth->h_proto, &network_depth);
+
+@@ -577,23 +591,30 @@ static void mlx5e_lro_update_hdr(struct
+ ipv4->check = 0;
+ ipv4->check = ip_fast_csum((unsigned char *)ipv4,
+ ipv4->ihl);
++
++ mlx5e_lro_update_tcp_hdr(cqe, tcp);
++ check = csum_partial(tcp, tcp->doff * 4,
++ csum_unfold((__force __sum16)cqe->check_sum));
++ /* Almost done, don't forget the pseudo header */
++ tcp->check = csum_tcpudp_magic(ipv4->saddr, ipv4->daddr,
++ tot_len - sizeof(struct iphdr),
++ IPPROTO_TCP, check);
+ } else {
++ u16 payload_len = tot_len - sizeof(struct ipv6hdr);
+ struct ipv6hdr *ipv6 = ip_p;
+
+ tcp = ip_p + sizeof(struct ipv6hdr);
+ skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
+
+ ipv6->hop_limit = cqe->lro_min_ttl;
+- ipv6->payload_len = cpu_to_be16(tot_len -
+- sizeof(struct ipv6hdr));
+- }
++ ipv6->payload_len = cpu_to_be16(payload_len);
+
+- tcp->psh = get_cqe_lro_tcppsh(cqe);
+-
+- if (tcp_ack) {
+- tcp->ack = 1;
+- tcp->ack_seq = cqe->lro_ack_seq_num;
+- tcp->window = cqe->lro_tcp_win;
++ mlx5e_lro_update_tcp_hdr(cqe, tcp);
++ check = csum_partial(tcp, tcp->doff * 4,
++ csum_unfold((__force __sum16)cqe->check_sum));
++ /* Almost done, don't forget the pseudo header */
++ tcp->check = csum_ipv6_magic(&ipv6->saddr, &ipv6->daddr, payload_len,
++ IPPROTO_TCP, check);
+ }
+ }
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Gal Pressman <galp@mellanox.com>
+Date: Thu, 25 Jan 2018 18:00:41 +0200
+Subject: net/mlx5e: Specify numa node when allocating drop rq
+
+From: Gal Pressman <galp@mellanox.com>
+
+
+[ Upstream commit 2f0db87901698cd73d828cc6fb1957b8916fc911 ]
+
+When allocating a drop rq, no numa node is explicitly set which means
+allocations are done on node zero. This is not necessarily the nearest
+numa node to the HCA, and even worse, might even be a memoryless numa
+node.
+
+Choose the numa_node given to us by the pci device in order to properly
+allocate the coherent dma memory instead of assuming zero is valid.
+
+Fixes: 556dd1b9c313 ("net/mlx5e: Set drop RQ's necessary parameters only")
+Signed-off-by: Gal Pressman <galp@mellanox.com>
+Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
++++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+@@ -1918,13 +1918,16 @@ static void mlx5e_build_rq_param(struct
+ param->wq.linear = 1;
+ }
+
+-static void mlx5e_build_drop_rq_param(struct mlx5e_rq_param *param)
++static void mlx5e_build_drop_rq_param(struct mlx5_core_dev *mdev,
++ struct mlx5e_rq_param *param)
+ {
+ void *rqc = param->rqc;
+ void *wq = MLX5_ADDR_OF(rqc, rqc, wq);
+
+ MLX5_SET(wq, wq, wq_type, MLX5_WQ_TYPE_LINKED_LIST);
+ MLX5_SET(wq, wq, log_wq_stride, ilog2(sizeof(struct mlx5e_rx_wqe)));
++
++ param->wq.buf_numa_node = dev_to_node(&mdev->pdev->dev);
+ }
+
+ static void mlx5e_build_sq_param_common(struct mlx5e_priv *priv,
+@@ -2778,6 +2781,9 @@ static int mlx5e_alloc_drop_cq(struct ml
+ struct mlx5e_cq *cq,
+ struct mlx5e_cq_param *param)
+ {
++ param->wq.buf_numa_node = dev_to_node(&mdev->pdev->dev);
++ param->wq.db_numa_node = dev_to_node(&mdev->pdev->dev);
++
+ return mlx5e_alloc_cq_common(mdev, param, cq);
+ }
+
+@@ -2789,7 +2795,7 @@ static int mlx5e_open_drop_rq(struct mlx
+ struct mlx5e_cq *cq = &drop_rq->cq;
+ int err;
+
+- mlx5e_build_drop_rq_param(&rq_param);
++ mlx5e_build_drop_rq_param(mdev, &rq_param);
+
+ err = mlx5e_alloc_drop_cq(mdev, cq, &cq_param);
+ if (err)
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Eran Ben Elisha <eranbe@mellanox.com>
+Date: Thu, 25 Jan 2018 11:18:09 +0200
+Subject: net/mlx5e: Verify inline header size do not exceed SKB linear size
+
+From: Eran Ben Elisha <eranbe@mellanox.com>
+
+
+[ Upstream commit f600c6088018d1dbc5777d18daa83660f7ea4a64 ]
+
+Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control
+segment of the WQE. It assumes that the linear part contains at least
+MLX5E_MIN_INLINE bytes, which can be wrong.
+
+Cited commit verified that driver will not copy more bytes into the
+inline header part that the actual size of the packet. Re-factor this
+check to make sure we do not exceed the linear part as well.
+
+This fix is aligned with the current driver's assumption that the entire
+L2 will be present in the linear part of the SKB.
+
+Fixes: 6aace17e64f4 ("net/mlx5e: Fix inline header size for small packets")
+Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
+Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
++++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+@@ -155,7 +155,7 @@ static inline u16 mlx5e_calc_min_inline(
+ default:
+ hlen = mlx5e_skb_l2_header_offset(skb);
+ }
+- return min_t(u16, hlen, skb->len);
++ return min_t(u16, hlen, skb_headlen(skb));
+ }
+
+ static inline void mlx5e_tx_skb_pull_inline(unsigned char **skb_data,
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Heiner Kallweit <hkallweit1@gmail.com>
+Date: Thu, 8 Feb 2018 21:01:48 +0100
+Subject: net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT
+
+From: Heiner Kallweit <hkallweit1@gmail.com>
+
+
+[ Upstream commit 08f5138512180a479ce6b9d23b825c9f4cd3be77 ]
+
+This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added
+long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates
+also PHY state changes and we should do what the symbol says.
+
+Fixes: 84a527a41f38 ("net: phylib: fix interrupts re-enablement in phy_start")
+Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/phy/phy.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -842,7 +842,7 @@ void phy_start(struct phy_device *phydev
+ break;
+ case PHY_HALTED:
+ /* make sure interrupts are re-enabled for the PHY */
+- if (phydev->irq != PHY_POLL) {
++ if (phy_interrupt_is_valid(phydev)) {
+ err = phy_enable_interrupts(phydev);
+ if (err < 0)
+ break;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Ivan Vecera <ivecera@redhat.com>
+Date: Thu, 8 Feb 2018 16:10:39 +0100
+Subject: net/sched: cls_u32: fix cls_u32 on filter replace
+
+From: Ivan Vecera <ivecera@redhat.com>
+
+
+[ Upstream commit eb53f7af6f15285e2f6ada97285395343ce9f433 ]
+
+The following sequence is currently broken:
+
+ # tc qdisc add dev foo ingress
+ # tc filter replace dev foo protocol all ingress \
+ u32 match u8 0 0 action mirred egress mirror dev bar1
+ # tc filter replace dev foo protocol all ingress \
+ handle 800::800 pref 49152 \
+ u32 match u8 0 0 action mirred egress mirror dev bar2
+ Error: cls_u32: Key node flags do not match passed flags.
+ We have an error talking to the kernel, -1
+
+The error comes from u32_change() when comparing new and
+existing flags. The existing ones always contains one of
+TCA_CLS_FLAGS_{,NOT}_IN_HW flag depending on offloading state.
+These flags cannot be passed from userspace so the condition
+(n->flags != flags) in u32_change() always fails.
+
+Fix the condition so the flags TCA_CLS_FLAGS_NOT_IN_HW and
+TCA_CLS_FLAGS_IN_HW are not taken into account.
+
+Fixes: 24d3dc6d27ea ("net/sched: cls_u32: Reflect HW offload status")
+Signed-off-by: Ivan Vecera <ivecera@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sched/cls_u32.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/net/sched/cls_u32.c
++++ b/net/sched/cls_u32.c
+@@ -927,7 +927,8 @@ static int u32_change(struct net *net, s
+ if (TC_U32_KEY(n->handle) == 0)
+ return -EINVAL;
+
+- if (n->flags != flags)
++ if ((n->flags ^ flags) &
++ ~(TCA_CLS_FLAGS_IN_HW | TCA_CLS_FLAGS_NOT_IN_HW))
+ return -EINVAL;
+
+ new = u32_init_knode(tp, n);
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Roman Kapl <code@rkapl.cz>
+Date: Mon, 19 Feb 2018 21:32:51 +0100
+Subject: net: sched: report if filter is too large to dump
+
+From: Roman Kapl <code@rkapl.cz>
+
+
+[ Upstream commit 5ae437ad5a2ed573b1ebb04e0afa70b8869f88dd ]
+
+So far, if the filter was too large to fit in the allocated skb, the
+kernel did not return any error and stopped dumping. Modify the dumper
+so that it returns -EMSGSIZE when a filter fails to dump and it is the
+first filter in the skb. If we are not first, we will get a next chance
+with more room.
+
+I understand this is pretty near to being an API change, but the
+original design (silent truncation) can be considered a bug.
+
+Note: The error case can happen pretty easily if you create a filter
+with 32 actions and have 4kb pages. Also recent versions of iproute try
+to be clever with their buffer allocation size, which in turn leads to
+
+Signed-off-by: Roman Kapl <code@rkapl.cz>
+Acked-by: Jiri Pirko <jiri@mellanox.com>
+Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sched/cls_api.c | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/net/sched/cls_api.c
++++ b/net/sched/cls_api.c
+@@ -871,13 +871,18 @@ static int tc_dump_tfilter(struct sk_buf
+ if (tca[TCA_CHAIN] &&
+ nla_get_u32(tca[TCA_CHAIN]) != chain->index)
+ continue;
+- if (!tcf_chain_dump(chain, skb, cb, index_start, &index))
++ if (!tcf_chain_dump(chain, skb, cb, index_start, &index)) {
++ err = -EMSGSIZE;
+ break;
++ }
+ }
+
+ cb->args[0] = index;
+
+ out:
++ /* If we did no progress, the error (EMSGSIZE) is real */
++ if (skb->len == 0 && err)
++ return err;
+ return skb->len;
+ }
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Eric Dumazet <edumazet@google.com>
+Date: Thu, 22 Feb 2018 19:45:27 -0800
+Subject: net_sched: gen_estimator: fix broken estimators based on percpu stats
+
+From: Eric Dumazet <edumazet@google.com>
+
+
+[ Upstream commit a5f7add332b4ea6d4b9480971b3b0f5e66466ae9 ]
+
+pfifo_fast got percpu stats lately, uncovering a bug I introduced last
+year in linux-4.10.
+
+I missed the fact that we have to clear our temporary storage
+before calling __gnet_stats_copy_basic() in the case of percpu stats.
+
+Without this fix, rate estimators (tc qd replace dev xxx root est 1sec
+4sec pfifo_fast) are utterly broken.
+
+Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
+Signed-off-by: Eric Dumazet <edumazet@google.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/core/gen_estimator.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/net/core/gen_estimator.c
++++ b/net/core/gen_estimator.c
+@@ -66,6 +66,7 @@ struct net_rate_estimator {
+ static void est_fetch_counters(struct net_rate_estimator *e,
+ struct gnet_stats_basic_packed *b)
+ {
++ memset(b, 0, sizeof(*b));
+ if (e->stats_lock)
+ spin_lock(e->stats_lock);
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
+Date: Tue, 6 Feb 2018 14:48:32 +0100
+Subject: netlink: ensure to loop over all netns in genlmsg_multicast_allns()
+
+From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
+
+
+[ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ]
+
+Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
+case when commit 134e63756d5f was pushed.
+However, there was no reason to stop the loop if a netns does not have
+listeners.
+Returns -ESRCH only if there was no listeners in all netns.
+
+To avoid having the same problem in the future, I didn't take the
+assumption that nlmsg_multicast() returns only 0 or -ESRCH.
+
+Fixes: 134e63756d5f ("genetlink: make netns aware")
+CC: Johannes Berg <johannes.berg@intel.com>
+Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/netlink/genetlink.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+--- a/net/netlink/genetlink.c
++++ b/net/netlink/genetlink.c
+@@ -1081,6 +1081,7 @@ static int genlmsg_mcast(struct sk_buff
+ {
+ struct sk_buff *tmp;
+ struct net *net, *prev = NULL;
++ bool delivered = false;
+ int err;
+
+ for_each_net_rcu(net) {
+@@ -1092,14 +1093,21 @@ static int genlmsg_mcast(struct sk_buff
+ }
+ err = nlmsg_multicast(prev->genl_sock, tmp,
+ portid, group, flags);
+- if (err)
++ if (!err)
++ delivered = true;
++ else if (err != -ESRCH)
+ goto error;
+ }
+
+ prev = net;
+ }
+
+- return nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
++ err = nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
++ if (!err)
++ delivered = true;
++ else if (err != -ESRCH)
++ goto error;
++ return delivered ? 0 : -ESRCH;
+ error:
+ kfree_skb(skb);
+ return err;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: "Jason A. Donenfeld" <Jason@zx2c4.com>
+Date: Wed, 21 Feb 2018 04:41:59 +0100
+Subject: netlink: put module reference if dump start fails
+
+From: "Jason A. Donenfeld" <Jason@zx2c4.com>
+
+
+[ Upstream commit b87b6194be631c94785fe93398651e804ed43e28 ]
+
+Before, if cb->start() failed, the module reference would never be put,
+because cb->cb_running is intentionally false at this point. Users are
+generally annoyed by this because they can no longer unload modules that
+leak references. Also, it may be possible to tediously wrap a reference
+counter back to zero, especially since module.c still uses atomic_inc
+instead of refcount_inc.
+
+This patch expands the error path to simply call module_put if
+cb->start() fails.
+
+Fixes: 41c87425a1ac ("netlink: do not set cb_running if dump's start() errs")
+Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/netlink/af_netlink.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/net/netlink/af_netlink.c
++++ b/net/netlink/af_netlink.c
+@@ -2276,7 +2276,7 @@ int __netlink_dump_start(struct sock *ss
+ if (cb->start) {
+ ret = cb->start(cb);
+ if (ret)
+- goto error_unlock;
++ goto error_put;
+ }
+
+ nlk->cb_running = true;
+@@ -2296,6 +2296,8 @@ int __netlink_dump_start(struct sock *ss
+ */
+ return -EINTR;
+
++error_put:
++ module_put(control->module);
+ error_unlock:
+ sock_put(sk);
+ mutex_unlock(nlk->cb_mutex);
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Guillaume Nault <g.nault@alphalink.fr>
+Date: Fri, 2 Mar 2018 18:41:16 +0100
+Subject: ppp: prevent unregistered channels from connecting to PPP units
+
+From: Guillaume Nault <g.nault@alphalink.fr>
+
+
+[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ]
+
+PPP units don't hold any reference on the channels connected to it.
+It is the channel's responsibility to ensure that it disconnects from
+its unit before being destroyed.
+In practice, this is ensured by ppp_unregister_channel() disconnecting
+the channel from the unit before dropping a reference on the channel.
+
+However, it is possible for an unregistered channel to connect to a PPP
+unit: register a channel with ppp_register_net_channel(), attach a
+/dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel
+with ppp_unregister_channel() and finally connect the /dev/ppp file to
+a PPP unit with ioctl(PPPIOCCONNECT).
+
+Once in this situation, the channel is only held by the /dev/ppp file,
+which can be released at anytime and free the channel without letting
+the parent PPP unit know. Then the ppp structure ends up with dangling
+pointers in its ->channels list.
+
+Prevent this scenario by forbidding unregistered channels from
+connecting to PPP units. This maintains the code logic by keeping
+ppp_unregister_channel() responsible from disconnecting the channel if
+necessary and avoids modification on the reference counting mechanism.
+
+This issue seems to predate git history (successfully reproduced on
+Linux 2.6.26 and earlier PPP commits are unrelated).
+
+Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ppp/ppp_generic.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/net/ppp/ppp_generic.c
++++ b/drivers/net/ppp/ppp_generic.c
+@@ -3158,6 +3158,15 @@ ppp_connect_channel(struct channel *pch,
+ goto outl;
+
+ ppp_lock(ppp);
++ spin_lock_bh(&pch->downl);
++ if (!pch->chan) {
++ /* Don't connect unregistered channels */
++ spin_unlock_bh(&pch->downl);
++ ppp_unlock(ppp);
++ ret = -ENOTCONN;
++ goto outl;
++ }
++ spin_unlock_bh(&pch->downl);
+ if (pch->file.hdrlen > ppp->file.hdrlen)
+ ppp->file.hdrlen = pch->file.hdrlen;
+ hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Tue, 27 Feb 2018 18:58:15 +0100
+Subject: Revert "s390/qeth: fix using of ref counter for rxip addresses"
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit 4964c66fd49b2e2342da35358f2ff74614bcbaee ]
+
+This reverts commit cb816192d986f7596009dedcf2201fe2e5bc2aa7.
+
+The issue this attempted to fix never actually occurs.
+l3_add_rxip() checks (via l3_ip_from_hash()) if the requested address
+was previously added to the card. If so, it returns -EEXIST and doesn't
+call l3_add_ip().
+As a result, the "address exists" path in l3_add_ip() is never taken
+for rxip addresses, and this patch had no effect.
+
+Fixes: cb816192d986 ("s390/qeth: fix using of ref counter for rxip addresses")
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_l3_main.c | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+--- a/drivers/s390/net/qeth_l3_main.c
++++ b/drivers/s390/net/qeth_l3_main.c
+@@ -249,8 +249,7 @@ int qeth_l3_delete_ip(struct qeth_card *
+ return -ENOENT;
+
+ addr->ref_counter--;
+- if (addr->ref_counter > 0 && (addr->type == QETH_IP_TYPE_NORMAL ||
+- addr->type == QETH_IP_TYPE_RXIP))
++ if (addr->type == QETH_IP_TYPE_NORMAL && addr->ref_counter > 0)
+ return rc;
+ if (addr->in_progress)
+ return -EINPROGRESS;
+@@ -328,9 +327,8 @@ int qeth_l3_add_ip(struct qeth_card *car
+ kfree(addr);
+ }
+ } else {
+- if (addr->type == QETH_IP_TYPE_NORMAL ||
+- addr->type == QETH_IP_TYPE_RXIP)
+- addr->ref_counter++;
++ if (addr->type == QETH_IP_TYPE_NORMAL)
++ addr->ref_counter++;
+ }
+
+ return rc;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: David Howells <dhowells@redhat.com>
+Date: Thu, 22 Feb 2018 14:38:14 +0000
+Subject: rxrpc: Fix send in rxrpc_send_data_packet()
+
+From: David Howells <dhowells@redhat.com>
+
+
+[ Upstream commit 93c62c45ed5fad1b87e3a45835b251cd68de9c46 ]
+
+All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
+both parts of the iov[] buffer, but one of them does not. Fix it so that
+it does.
+
+Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
+header included, but no payload.
+
+Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
+Reported-by: Marc Dionne <marc.dionne@auristor.com>
+Signed-off-by: David Howells <dhowells@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/rxrpc/output.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/net/rxrpc/output.c
++++ b/net/rxrpc/output.c
+@@ -395,7 +395,7 @@ send_fragmentable:
+ (char *)&opt, sizeof(opt));
+ if (ret == 0) {
+ ret = kernel_sendmsg(conn->params.local->socket, &msg,
+- iov, 1, iov[0].iov_len);
++ iov, 2, len);
+
+ opt = IPV6_PMTUDISC_DO;
+ kernel_setsockopt(conn->params.local->socket,
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Tue, 27 Feb 2018 18:58:14 +0100
+Subject: s390/qeth: fix double-free on IP add/remove race
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit 14d066c3531a87f727968cacd85bd95c75f59843 ]
+
+Registering an IPv4 address with the HW takes quite a while, so we
+temporarily drop the ip_htable lock. Any concurrent add/remove of the
+same IP adjusts the IP's use count, and (on remove) is then blocked by
+addr->in_progress.
+After the register call has completed, we check the use count for
+concurrently attempted add/remove calls - and possibly straight-away
+deregister the IP again. This happens via l3_delete_ip(), which
+1) looks up the queried IP in the htable (getting a reference to the
+ *same* queried object),
+2) deregisters the IP from the HW, and
+3) frees the IP object.
+
+The caller in l3_add_ip() then does a second free on the same object.
+
+For this case, skip all the extra checks and lookups in l3_delete_ip()
+and just deregister & free the IP object ourselves.
+
+Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_l3_main.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/s390/net/qeth_l3_main.c
++++ b/drivers/s390/net/qeth_l3_main.c
+@@ -319,7 +319,8 @@ int qeth_l3_add_ip(struct qeth_card *car
+ (rc == IPA_RC_LAN_OFFLINE)) {
+ addr->disp_flag = QETH_DISP_ADDR_DO_NOTHING;
+ if (addr->ref_counter < 1) {
+- qeth_l3_delete_ip(card, addr);
++ qeth_l3_deregister_addr_entry(card, addr);
++ hash_del(&addr->hnode);
+ kfree(addr);
+ }
+ } else {
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Tue, 27 Feb 2018 18:58:16 +0100
+Subject: s390/qeth: fix IP address lookup for L3 devices
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit c5c48c58b259bb8f0482398370ee539d7a12df3e ]
+
+Current code ("qeth_l3_ip_from_hash()") matches a queried address object
+against objects in the IP table by IP address, Mask/Prefix Length and
+MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually
+require is either
+a) "is this IP address registered" (ie. match by IP address only),
+before adding a new address.
+b) or "is this address object registered" (ie. match all relevant
+ attributes), before deleting an address.
+
+Right now
+1. the ADD path is too strict in its lookup, and eg. doesn't detect
+conflicts between an existing NORMAL address and a new VIPA address
+(because the NORMAL address will have mask != 0, while VIPA has
+a mask == 0),
+2. the DELETE path is not strict enough, and eg. allows del_rxip() to
+delete a VIPA address as long as the IP address matches.
+
+Fix all this by adding helpers (_addr_match_ip() and _addr_match_all())
+that do the appropriate checking.
+
+Note that the ADD path for NORMAL addresses is special, as qeth keeps
+track of how many times such an address is in use (and there is no
+immediate way of returning errors to the caller). So when a requested
+NORMAL address _fully_ matches an existing one, it's not considered a
+conflict and we merely increment the refcount.
+
+Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_l3.h | 34 ++++++++++++++
+ drivers/s390/net/qeth_l3_main.c | 91 ++++++++++++++++++----------------------
+ 2 files changed, 74 insertions(+), 51 deletions(-)
+
+--- a/drivers/s390/net/qeth_l3.h
++++ b/drivers/s390/net/qeth_l3.h
+@@ -40,8 +40,40 @@ struct qeth_ipaddr {
+ unsigned int pfxlen;
+ } a6;
+ } u;
+-
+ };
++
++static inline bool qeth_l3_addr_match_ip(struct qeth_ipaddr *a1,
++ struct qeth_ipaddr *a2)
++{
++ if (a1->proto != a2->proto)
++ return false;
++ if (a1->proto == QETH_PROT_IPV6)
++ return ipv6_addr_equal(&a1->u.a6.addr, &a2->u.a6.addr);
++ return a1->u.a4.addr == a2->u.a4.addr;
++}
++
++static inline bool qeth_l3_addr_match_all(struct qeth_ipaddr *a1,
++ struct qeth_ipaddr *a2)
++{
++ /* Assumes that the pair was obtained via qeth_l3_addr_find_by_ip(),
++ * so 'proto' and 'addr' match for sure.
++ *
++ * For ucast:
++ * - 'mac' is always 0.
++ * - 'mask'/'pfxlen' for RXIP/VIPA is always 0. For NORMAL, matching
++ * values are required to avoid mixups in takeover eligibility.
++ *
++ * For mcast,
++ * - 'mac' is mapped from the IP, and thus always matches.
++ * - 'mask'/'pfxlen' is always 0.
++ */
++ if (a1->type != a2->type)
++ return false;
++ if (a1->proto == QETH_PROT_IPV6)
++ return a1->u.a6.pfxlen == a2->u.a6.pfxlen;
++ return a1->u.a4.mask == a2->u.a4.mask;
++}
++
+ static inline u64 qeth_l3_ipaddr_hash(struct qeth_ipaddr *addr)
+ {
+ u64 ret = 0;
+--- a/drivers/s390/net/qeth_l3_main.c
++++ b/drivers/s390/net/qeth_l3_main.c
+@@ -149,6 +149,24 @@ int qeth_l3_string_to_ipaddr(const char
+ return -EINVAL;
+ }
+
++static struct qeth_ipaddr *qeth_l3_find_addr_by_ip(struct qeth_card *card,
++ struct qeth_ipaddr *query)
++{
++ u64 key = qeth_l3_ipaddr_hash(query);
++ struct qeth_ipaddr *addr;
++
++ if (query->is_multicast) {
++ hash_for_each_possible(card->ip_mc_htable, addr, hnode, key)
++ if (qeth_l3_addr_match_ip(addr, query))
++ return addr;
++ } else {
++ hash_for_each_possible(card->ip_htable, addr, hnode, key)
++ if (qeth_l3_addr_match_ip(addr, query))
++ return addr;
++ }
++ return NULL;
++}
++
+ static void qeth_l3_convert_addr_to_bits(u8 *addr, u8 *bits, int len)
+ {
+ int i, j;
+@@ -202,34 +220,6 @@ static bool qeth_l3_is_addr_covered_by_i
+ return rc;
+ }
+
+-inline int
+-qeth_l3_ipaddrs_is_equal(struct qeth_ipaddr *addr1, struct qeth_ipaddr *addr2)
+-{
+- return addr1->proto == addr2->proto &&
+- !memcmp(&addr1->u, &addr2->u, sizeof(addr1->u)) &&
+- !memcmp(&addr1->mac, &addr2->mac, sizeof(addr1->mac));
+-}
+-
+-static struct qeth_ipaddr *
+-qeth_l3_ip_from_hash(struct qeth_card *card, struct qeth_ipaddr *tmp_addr)
+-{
+- struct qeth_ipaddr *addr;
+-
+- if (tmp_addr->is_multicast) {
+- hash_for_each_possible(card->ip_mc_htable, addr,
+- hnode, qeth_l3_ipaddr_hash(tmp_addr))
+- if (qeth_l3_ipaddrs_is_equal(tmp_addr, addr))
+- return addr;
+- } else {
+- hash_for_each_possible(card->ip_htable, addr,
+- hnode, qeth_l3_ipaddr_hash(tmp_addr))
+- if (qeth_l3_ipaddrs_is_equal(tmp_addr, addr))
+- return addr;
+- }
+-
+- return NULL;
+-}
+-
+ int qeth_l3_delete_ip(struct qeth_card *card, struct qeth_ipaddr *tmp_addr)
+ {
+ int rc = 0;
+@@ -244,8 +234,8 @@ int qeth_l3_delete_ip(struct qeth_card *
+ QETH_CARD_HEX(card, 4, ((char *)&tmp_addr->u.a6.addr) + 8, 8);
+ }
+
+- addr = qeth_l3_ip_from_hash(card, tmp_addr);
+- if (!addr)
++ addr = qeth_l3_find_addr_by_ip(card, tmp_addr);
++ if (!addr || !qeth_l3_addr_match_all(addr, tmp_addr))
+ return -ENOENT;
+
+ addr->ref_counter--;
+@@ -267,6 +257,7 @@ int qeth_l3_add_ip(struct qeth_card *car
+ {
+ int rc = 0;
+ struct qeth_ipaddr *addr;
++ char buf[40];
+
+ QETH_CARD_TEXT(card, 4, "addip");
+
+@@ -277,8 +268,20 @@ int qeth_l3_add_ip(struct qeth_card *car
+ QETH_CARD_HEX(card, 4, ((char *)&tmp_addr->u.a6.addr) + 8, 8);
+ }
+
+- addr = qeth_l3_ip_from_hash(card, tmp_addr);
+- if (!addr) {
++ addr = qeth_l3_find_addr_by_ip(card, tmp_addr);
++ if (addr) {
++ if (tmp_addr->type != QETH_IP_TYPE_NORMAL)
++ return -EADDRINUSE;
++ if (qeth_l3_addr_match_all(addr, tmp_addr)) {
++ addr->ref_counter++;
++ return 0;
++ }
++ qeth_l3_ipaddr_to_string(tmp_addr->proto, (u8 *)&tmp_addr->u,
++ buf);
++ dev_warn(&card->gdev->dev,
++ "Registering IP address %s failed\n", buf);
++ return -EADDRINUSE;
++ } else {
+ addr = qeth_l3_get_addr_buffer(tmp_addr->proto);
+ if (!addr)
+ return -ENOMEM;
+@@ -326,11 +329,7 @@ int qeth_l3_add_ip(struct qeth_card *car
+ hash_del(&addr->hnode);
+ kfree(addr);
+ }
+- } else {
+- if (addr->type == QETH_IP_TYPE_NORMAL)
+- addr->ref_counter++;
+ }
+-
+ return rc;
+ }
+
+@@ -714,12 +713,7 @@ int qeth_l3_add_vipa(struct qeth_card *c
+ return -ENOMEM;
+
+ spin_lock_bh(&card->ip_lock);
+-
+- if (qeth_l3_ip_from_hash(card, ipaddr))
+- rc = -EEXIST;
+- else
+- qeth_l3_add_ip(card, ipaddr);
+-
++ rc = qeth_l3_add_ip(card, ipaddr);
+ spin_unlock_bh(&card->ip_lock);
+
+ kfree(ipaddr);
+@@ -782,12 +776,7 @@ int qeth_l3_add_rxip(struct qeth_card *c
+ return -ENOMEM;
+
+ spin_lock_bh(&card->ip_lock);
+-
+- if (qeth_l3_ip_from_hash(card, ipaddr))
+- rc = -EEXIST;
+- else
+- qeth_l3_add_ip(card, ipaddr);
+-
++ rc = qeth_l3_add_ip(card, ipaddr);
+ spin_unlock_bh(&card->ip_lock);
+
+ kfree(ipaddr);
+@@ -1395,8 +1384,9 @@ qeth_l3_add_mc_to_hash(struct qeth_card
+ memcpy(tmp->mac, buf, sizeof(tmp->mac));
+ tmp->is_multicast = 1;
+
+- ipm = qeth_l3_ip_from_hash(card, tmp);
++ ipm = qeth_l3_find_addr_by_ip(card, tmp);
+ if (ipm) {
++ /* for mcast, by-IP match means full match */
+ ipm->disp_flag = QETH_DISP_ADDR_DO_NOTHING;
+ } else {
+ ipm = qeth_l3_get_addr_buffer(QETH_PROT_IPV4);
+@@ -1479,8 +1469,9 @@ qeth_l3_add_mc6_to_hash(struct qeth_card
+ sizeof(struct in6_addr));
+ tmp->is_multicast = 1;
+
+- ipm = qeth_l3_ip_from_hash(card, tmp);
++ ipm = qeth_l3_find_addr_by_ip(card, tmp);
+ if (ipm) {
++ /* for mcast, by-IP match means full match */
+ ipm->disp_flag = QETH_DISP_ADDR_DO_NOTHING;
+ continue;
+ }
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Tue, 27 Feb 2018 18:58:13 +0100
+Subject: s390/qeth: fix IP removal on offline cards
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit 98d823ab1fbdcb13abc25b420f9bb71bade42056 ]
+
+If the HW is not reachable, then none of the IPs in qeth's internal
+table has been registered with the HW yet. So when deleting such an IP,
+there's no need to stage it for deregistration - just drop it from
+the table.
+
+This fixes the "add-delete-add" scenario on an offline card, where the
+the second "add" merely increments the IP's use count. But as the IP is
+still set to DISP_ADDR_DELETE from the previous "delete" step,
+l3_recover_ip() won't register it with the HW when the card goes online.
+
+Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_l3_main.c | 14 +++-----------
+ 1 file changed, 3 insertions(+), 11 deletions(-)
+
+--- a/drivers/s390/net/qeth_l3_main.c
++++ b/drivers/s390/net/qeth_l3_main.c
+@@ -255,12 +255,8 @@ int qeth_l3_delete_ip(struct qeth_card *
+ if (addr->in_progress)
+ return -EINPROGRESS;
+
+- if (!qeth_card_hw_is_reachable(card)) {
+- addr->disp_flag = QETH_DISP_ADDR_DELETE;
+- return 0;
+- }
+-
+- rc = qeth_l3_deregister_addr_entry(card, addr);
++ if (qeth_card_hw_is_reachable(card))
++ rc = qeth_l3_deregister_addr_entry(card, addr);
+
+ hash_del(&addr->hnode);
+ kfree(addr);
+@@ -403,11 +399,7 @@ static void qeth_l3_recover_ip(struct qe
+ spin_lock_bh(&card->ip_lock);
+
+ hash_for_each_safe(card->ip_htable, i, tmp, addr, hnode) {
+- if (addr->disp_flag == QETH_DISP_ADDR_DELETE) {
+- qeth_l3_deregister_addr_entry(card, addr);
+- hash_del(&addr->hnode);
+- kfree(addr);
+- } else if (addr->disp_flag == QETH_DISP_ADDR_ADD) {
++ if (addr->disp_flag == QETH_DISP_ADDR_ADD) {
+ if (addr->proto == QETH_PROT_IPV4) {
+ addr->in_progress = 1;
+ spin_unlock_bh(&card->ip_lock);
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Tue, 27 Feb 2018 18:58:17 +0100
+Subject: s390/qeth: fix IPA command submission race
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ]
+
+If multiple IPA commands are build & sent out concurrently,
+fill_ipacmd_header() may assign a seqno value to a command that's
+different from what send_control_data() later assigns to this command's
+reply.
+This is due to other commands passing through send_control_data(),
+and incrementing card->seqno.ipa along the way.
+
+So one IPA command has no reply that's waiting for its seqno, while some
+other IPA command has multiple reply objects waiting for it.
+Only one of those waiting replies wins, and the other(s) times out and
+triggers a recovery via send_ipa_cmd().
+
+Fix this by making sure that the same seqno value is assigned to
+a command and its reply object.
+Do so immediately before submitting the command & while holding the
+irq_pending "lock", to produce nicely ascending seqnos.
+
+As a side effect, *all* IPA commands now use a reply object that's
+waiting for its actual seqno. Previously, early IPA commands that were
+submitted while the card was still DOWN used the "catch-all" IDX seqno.
+
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_core_main.c | 19 ++++++++++---------
+ 1 file changed, 10 insertions(+), 9 deletions(-)
+
+--- a/drivers/s390/net/qeth_core_main.c
++++ b/drivers/s390/net/qeth_core_main.c
+@@ -2087,25 +2087,26 @@ int qeth_send_control_data(struct qeth_c
+ }
+ reply->callback = reply_cb;
+ reply->param = reply_param;
+- if (card->state == CARD_STATE_DOWN)
+- reply->seqno = QETH_IDX_COMMAND_SEQNO;
+- else
+- reply->seqno = card->seqno.ipa++;
++
+ init_waitqueue_head(&reply->wait_q);
+- spin_lock_irqsave(&card->lock, flags);
+- list_add_tail(&reply->list, &card->cmd_waiter_list);
+- spin_unlock_irqrestore(&card->lock, flags);
+ QETH_DBF_HEX(CTRL, 2, iob->data, QETH_DBF_CTRL_LEN);
+
+ while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
+- qeth_prepare_control_data(card, len, iob);
+
+ if (IS_IPA(iob->data)) {
+ cmd = __ipa_cmd(iob);
++ cmd->hdr.seqno = card->seqno.ipa++;
++ reply->seqno = cmd->hdr.seqno;
+ event_timeout = QETH_IPA_TIMEOUT;
+ } else {
++ reply->seqno = QETH_IDX_COMMAND_SEQNO;
+ event_timeout = QETH_TIMEOUT;
+ }
++ qeth_prepare_control_data(card, len, iob);
++
++ spin_lock_irqsave(&card->lock, flags);
++ list_add_tail(&reply->list, &card->cmd_waiter_list);
++ spin_unlock_irqrestore(&card->lock, flags);
+
+ timeout = jiffies + event_timeout;
+
+@@ -2896,7 +2897,7 @@ static void qeth_fill_ipacmd_header(stru
+ memset(cmd, 0, sizeof(struct qeth_ipa_cmd));
+ cmd->hdr.command = command;
+ cmd->hdr.initiator = IPA_CMD_INITIATOR_HOST;
+- cmd->hdr.seqno = card->seqno.ipa;
++ /* cmd->hdr.seqno is set by qeth_send_control_data() */
+ cmd->hdr.adapter_type = qeth_get_ipa_adp_type(card->info.link_type);
+ cmd->hdr.rel_adapter_no = (__u8) card->info.portno;
+ if (card->options.layer2)
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Tue, 27 Feb 2018 18:58:12 +0100
+Subject: s390/qeth: fix overestimated count of buffer elements
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit 12472af89632beb1ed8dea29d4efe208ca05b06a ]
+
+qeth_get_elements_for_range() doesn't know how to handle a 0-length
+range (ie. start == end), and returns 1 when it should return 0.
+Such ranges occur on TSO skbs, where the L2/L3/L4 headers (and thus all
+of the skb's linear data) are skipped when mapping the skb into regular
+buffer elements.
+
+This overestimation may cause several performance-related issues:
+1. sub-optimal IO buffer selection, where the next buffer gets selected
+ even though the skb would actually still fit into the current buffer.
+2. forced linearization, if the element count for a non-linear skb
+ exceeds QETH_MAX_BUFFER_ELEMENTS.
+
+Rather than modifying qeth_get_elements_for_range() and adding overhead
+to every caller, fix up those callers that are in risk of passing a
+0-length range.
+
+Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count")
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_core_main.c | 10 ++++++----
+ drivers/s390/net/qeth_l3_main.c | 11 ++++++-----
+ 2 files changed, 12 insertions(+), 9 deletions(-)
+
+--- a/drivers/s390/net/qeth_core_main.c
++++ b/drivers/s390/net/qeth_core_main.c
+@@ -3861,10 +3861,12 @@ EXPORT_SYMBOL_GPL(qeth_get_elements_for_
+ int qeth_get_elements_no(struct qeth_card *card,
+ struct sk_buff *skb, int extra_elems, int data_offset)
+ {
+- int elements = qeth_get_elements_for_range(
+- (addr_t)skb->data + data_offset,
+- (addr_t)skb->data + skb_headlen(skb)) +
+- qeth_get_elements_for_frags(skb);
++ addr_t end = (addr_t)skb->data + skb_headlen(skb);
++ int elements = qeth_get_elements_for_frags(skb);
++ addr_t start = (addr_t)skb->data + data_offset;
++
++ if (start != end)
++ elements += qeth_get_elements_for_range(start, end);
+
+ if ((elements + extra_elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
+ QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
+--- a/drivers/s390/net/qeth_l3_main.c
++++ b/drivers/s390/net/qeth_l3_main.c
+@@ -2633,11 +2633,12 @@ static void qeth_tso_fill_header(struct
+ static int qeth_l3_get_elements_no_tso(struct qeth_card *card,
+ struct sk_buff *skb, int extra_elems)
+ {
+- addr_t tcpdptr = (addr_t)tcp_hdr(skb) + tcp_hdrlen(skb);
+- int elements = qeth_get_elements_for_range(
+- tcpdptr,
+- (addr_t)skb->data + skb_headlen(skb)) +
+- qeth_get_elements_for_frags(skb);
++ addr_t start = (addr_t)tcp_hdr(skb) + tcp_hdrlen(skb);
++ addr_t end = (addr_t)skb->data + skb_headlen(skb);
++ int elements = qeth_get_elements_for_frags(skb);
++
++ if (start != end)
++ elements += qeth_get_elements_for_range(start, end);
+
+ if ((elements + extra_elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
+ QETH_DBF_MESSAGE(2,
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Fri, 9 Feb 2018 11:03:50 +0100
+Subject: s390/qeth: fix SETIP command handling
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ]
+
+send_control_data() applies some special handling to SETIP v4 IPA
+commands. But current code parses *all* command types for the SETIP
+command code. Limit the command code check to IPA commands.
+
+Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command")
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_core.h | 5 +++++
+ drivers/s390/net/qeth_core_main.c | 14 ++++++++------
+ 2 files changed, 13 insertions(+), 6 deletions(-)
+
+--- a/drivers/s390/net/qeth_core.h
++++ b/drivers/s390/net/qeth_core.h
+@@ -580,6 +580,11 @@ struct qeth_cmd_buffer {
+ void (*callback) (struct qeth_channel *, struct qeth_cmd_buffer *);
+ };
+
++static inline struct qeth_ipa_cmd *__ipa_cmd(struct qeth_cmd_buffer *iob)
++{
++ return (struct qeth_ipa_cmd *)(iob->data + IPA_PDU_HEADER_SIZE);
++}
++
+ /**
+ * definition of a qeth channel, used for read and write
+ */
+--- a/drivers/s390/net/qeth_core_main.c
++++ b/drivers/s390/net/qeth_core_main.c
+@@ -2073,7 +2073,7 @@ int qeth_send_control_data(struct qeth_c
+ unsigned long flags;
+ struct qeth_reply *reply = NULL;
+ unsigned long timeout, event_timeout;
+- struct qeth_ipa_cmd *cmd;
++ struct qeth_ipa_cmd *cmd = NULL;
+
+ QETH_CARD_TEXT(card, 2, "sendctl");
+
+@@ -2100,10 +2100,13 @@ int qeth_send_control_data(struct qeth_c
+ while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
+ qeth_prepare_control_data(card, len, iob);
+
+- if (IS_IPA(iob->data))
++ if (IS_IPA(iob->data)) {
++ cmd = __ipa_cmd(iob);
+ event_timeout = QETH_IPA_TIMEOUT;
+- else
++ } else {
+ event_timeout = QETH_TIMEOUT;
++ }
++
+ timeout = jiffies + event_timeout;
+
+ QETH_CARD_TEXT(card, 6, "noirqpnd");
+@@ -2128,9 +2131,8 @@ int qeth_send_control_data(struct qeth_c
+
+ /* we have only one long running ipassist, since we can ensure
+ process context of this command we can sleep */
+- cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+- if ((cmd->hdr.command == IPA_CMD_SETIP) &&
+- (cmd->hdr.prot_version == QETH_PROT_IPV4)) {
++ if (cmd && cmd->hdr.command == IPA_CMD_SETIP &&
++ cmd->hdr.prot_version == QETH_PROT_IPV4) {
+ if (!wait_event_timeout(reply->wait_q,
+ atomic_read(&reply->received), event_timeout))
+ goto time_err;
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Ursula Braun <ubraun@linux.vnet.ibm.com>
+Date: Fri, 9 Feb 2018 11:03:49 +0100
+Subject: s390/qeth: fix underestimated count of buffer elements
+
+From: Ursula Braun <ubraun@linux.vnet.ibm.com>
+
+
+[ Upstream commit 89271c65edd599207dd982007900506283c90ae3 ]
+
+For a memory range/skb where the last byte falls onto a page boundary
+(ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the
+calculation currently doesn't round up to the next PFN due to an
+off-by-one error.
+Thus qeth believes that the skb occupies one page less than it
+actually does, and may select a IO buffer that doesn't have enough spare
+buffer elements to fit all of the skb's data.
+HW detects this as a malformed buffer descriptor, and raises an
+exception which then triggers device recovery.
+
+Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count")
+Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_core.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/s390/net/qeth_core.h
++++ b/drivers/s390/net/qeth_core.h
+@@ -834,7 +834,7 @@ struct qeth_trap_id {
+ */
+ static inline int qeth_get_elements_for_range(addr_t start, addr_t end)
+ {
+- return PFN_UP(end - 1) - PFN_DOWN(start);
++ return PFN_UP(end) - PFN_DOWN(start);
+ }
+
+ static inline int qeth_get_micros(void)
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Xin Long <lucien.xin@gmail.com>
+Date: Mon, 12 Feb 2018 18:29:06 +0800
+Subject: sctp: do not pr_err for the duplicated node in transport rhlist
+
+From: Xin Long <lucien.xin@gmail.com>
+
+
+[ Upstream commit 27af86bb038d9c8b8066cd17854ddaf2ea92bce1 ]
+
+The pr_err in sctp_hash_transport was supposed to report a sctp bug
+for using rhashtable/rhlist.
+
+The err '-EEXIST' introduced in Commit cd2b70875058 ("sctp: check
+duplicate node before inserting a new transport") doesn't belong
+to that case.
+
+So just return -EEXIST back without pr_err any kmsg.
+
+Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport")
+Reported-by: Wei Chen <weichen@redhat.com>
+Signed-off-by: Xin Long <lucien.xin@gmail.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
+Acked-by: Neil Horman <nhorman@tuxdriver.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sctp/input.c | 5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- a/net/sctp/input.c
++++ b/net/sctp/input.c
+@@ -897,15 +897,12 @@ int sctp_hash_transport(struct sctp_tran
+ rhl_for_each_entry_rcu(transport, tmp, list, node)
+ if (transport->asoc->ep == t->asoc->ep) {
+ rcu_read_unlock();
+- err = -EEXIST;
+- goto out;
++ return -EEXIST;
+ }
+ rcu_read_unlock();
+
+ err = rhltable_insert_key(&sctp_transport_hashtable, &arg,
+ &t->node, sctp_hash_params);
+-
+-out:
+ if (err)
+ pr_err_once("insert transport fail, errno %d\n", err);
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Tommi Rantala <tommi.t.rantala@nokia.com>
+Date: Mon, 5 Feb 2018 21:48:14 +0200
+Subject: sctp: fix dst refcnt leak in sctp_v4_get_dst
+
+From: Tommi Rantala <tommi.t.rantala@nokia.com>
+
+
+[ Upstream commit 4a31a6b19f9ddf498c81f5c9b089742b7472a6f8 ]
+
+Fix dst reference count leak in sctp_v4_get_dst() introduced in commit
+410f03831 ("sctp: add routing output fallback"):
+
+When walking the address_list, successive ip_route_output_key() calls
+may return the same rt->dst with the reference incremented on each call.
+
+The code would not decrement the dst refcount when the dst pointer was
+identical from the previous iteration, causing the dst refcnt leak.
+
+Testcase:
+ ip netns add TEST
+ ip netns exec TEST ip link set lo up
+ ip link add dummy0 type dummy
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dev dummy0 netns TEST
+ ip link set dev dummy1 netns TEST
+ ip link set dev dummy2 netns TEST
+ ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0
+ ip netns exec TEST ip link set dummy0 up
+ ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1
+ ip netns exec TEST ip link set dummy1 up
+ ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2
+ ip netns exec TEST ip link set dummy2 up
+ ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3
+ ip netns del TEST
+
+In 4.4 and 4.9 kernels this results to:
+ [ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ ...
+
+Fixes: 410f03831 ("sctp: add routing output fallback")
+Fixes: 0ca50d12f ("sctp: fix src address selection if using secondary addresses")
+Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
+Acked-by: Neil Horman <nhorman@tuxdriver.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sctp/protocol.c | 10 ++++------
+ 1 file changed, 4 insertions(+), 6 deletions(-)
+
+--- a/net/sctp/protocol.c
++++ b/net/sctp/protocol.c
+@@ -514,22 +514,20 @@ static void sctp_v4_get_dst(struct sctp_
+ if (IS_ERR(rt))
+ continue;
+
+- if (!dst)
+- dst = &rt->dst;
+-
+ /* Ensure the src address belongs to the output
+ * interface.
+ */
+ odev = __ip_dev_find(sock_net(sk), laddr->a.v4.sin_addr.s_addr,
+ false);
+ if (!odev || odev->ifindex != fl4->flowi4_oif) {
+- if (&rt->dst != dst)
++ if (!dst)
++ dst = &rt->dst;
++ else
+ dst_release(&rt->dst);
+ continue;
+ }
+
+- if (dst != &rt->dst)
+- dst_release(dst);
++ dst_release(dst);
+ dst = &rt->dst;
+ break;
+ }
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+Date: Mon, 5 Feb 2018 15:10:35 +0300
+Subject: sctp: fix dst refcnt leak in sctp_v6_get_dst()
+
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+
+
+[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ]
+
+When going through the bind address list in sctp_v6_get_dst() and
+the previously found address is better ('matchlen > bmatchlen'),
+the code continues to the next iteration without releasing currently
+held destination.
+
+Fix it by releasing 'bdst' before continue to the next iteration, and
+instead of introducing one more '!IS_ERR(bdst)' check for dst_release(),
+move the already existed one right after ip6_dst_lookup_flow(), i.e. we
+shouldn't proceed further if we get an error for the route lookup.
+
+Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6")
+Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
+Acked-by: Neil Horman <nhorman@tuxdriver.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sctp/ipv6.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+--- a/net/sctp/ipv6.c
++++ b/net/sctp/ipv6.c
+@@ -326,8 +326,10 @@ static void sctp_v6_get_dst(struct sctp_
+ final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
+ bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
+
+- if (!IS_ERR(bdst) &&
+- ipv6_chk_addr(dev_net(bdst->dev),
++ if (IS_ERR(bdst))
++ continue;
++
++ if (ipv6_chk_addr(dev_net(bdst->dev),
+ &laddr->a.v6.sin6_addr, bdst->dev, 1)) {
+ if (!IS_ERR_OR_NULL(dst))
+ dst_release(dst);
+@@ -336,8 +338,10 @@ static void sctp_v6_get_dst(struct sctp_
+ }
+
+ bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
+- if (matchlen > bmatchlen)
++ if (matchlen > bmatchlen) {
++ dst_release(bdst);
+ continue;
++ }
+
+ if (!IS_ERR_OR_NULL(dst))
+ dst_release(dst);
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+Date: Fri, 9 Feb 2018 17:35:23 +0300
+Subject: sctp: verify size of a new chunk in _sctp_make_chunk()
+
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+
+
+[ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ]
+
+When SCTP makes INIT or INIT_ACK packet the total chunk length
+can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
+transmitting these packets, e.g. the crash on sending INIT_ACK:
+
+[ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
+ put:120156 head:000000007aa47635 data:00000000d991c2de
+ tail:0x1d640 end:0xfec0 dev:<NULL>
+...
+[ 597.976970] ------------[ cut here ]------------
+[ 598.033408] kernel BUG at net/core/skbuff.c:104!
+[ 600.314841] Call Trace:
+[ 600.345829] <IRQ>
+[ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
+[ 600.436934] skb_put+0x16c/0x200
+[ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp]
+[ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp]
+[ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
+[ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
+[ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp]
+[ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp]
+[ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
+[ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp]
+[ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
+[ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
+[ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
+[ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp]
+[ 601.233575] sctp_do_sm+0x182/0x560 [sctp]
+[ 601.284328] ? sctp_has_association+0x70/0x70 [sctp]
+[ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp]
+[ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp]
+...
+
+Here the chunk size for INIT_ACK packet becomes too big, mostly
+because of the state cookie (INIT packet has large size with
+many address parameters), plus additional server parameters.
+
+Later this chunk causes the panic in skb_put_data():
+
+ skb_packet_transmit()
+ sctp_packet_pack()
+ skb_put_data(nskb, chunk->skb->data, chunk->skb->len);
+
+'nskb' (head skb) was previously allocated with packet->size
+from u16 'chunk->chunk_hdr->length'.
+
+As suggested by Marcelo we should check the chunk's length in
+_sctp_make_chunk() before trying to allocate skb for it and
+discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
+
+Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com>
+Acked-by: Neil Horman <nhorman@tuxdriver.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sctp/sm_make_chunk.c | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/net/sctp/sm_make_chunk.c
++++ b/net/sctp/sm_make_chunk.c
+@@ -1378,9 +1378,14 @@ static struct sctp_chunk *_sctp_make_chu
+ struct sctp_chunk *retval;
+ struct sk_buff *skb;
+ struct sock *sk;
++ int chunklen;
++
++ chunklen = SCTP_PAD4(sizeof(*chunk_hdr) + paylen);
++ if (chunklen > SCTP_MAX_CHUNK_LEN)
++ goto nodata;
+
+ /* No need to allocate LL here, as this is only a chunk. */
+- skb = alloc_skb(SCTP_PAD4(sizeof(*chunk_hdr) + paylen), gfp);
++ skb = alloc_skb(chunklen, gfp);
+ if (!skb)
+ goto nodata;
+
x86-xen-zero-msr_ia32_spec_ctrl-before-suspend.patch
x86-platform-intel-mid-handle-intel-edison-reboot-correctly.patch
x86-cpu_entry_area-sync-cpu_entry_area-to-initial_page_table.patch
+bridge-check-brport-attr-show-in-brport_show.patch
+fib_semantics-don-t-match-route-with-mismatching-tclassid.patch
+hdlc_ppp-carrier-detect-ok-don-t-turn-off-negotiation.patch
+ipv6-sit-work-around-bogus-gcc-8-wrestrict-warning.patch
+net-amd-xgbe-fix-comparison-to-bitshift-when-dealing-with-a-mask.patch
+net-ethernet-ti-cpsw-fix-net-watchdog-timeout.patch
+net-fix-race-on-decreasing-number-of-tx-queues.patch
+net-ipv4-don-t-allow-setting-net.ipv4.route.min_pmtu-below-68.patch
+netlink-ensure-to-loop-over-all-netns-in-genlmsg_multicast_allns.patch
+net-sched-report-if-filter-is-too-large-to-dump.patch
+ppp-prevent-unregistered-channels-from-connecting-to-ppp-units.patch
+sctp-verify-size-of-a-new-chunk-in-_sctp_make_chunk.patch
+udplite-fix-partial-checksum-initialization.patch
+net-mlx5e-fix-tcp-checksum-in-lro-buffers.patch
+sctp-fix-dst-refcnt-leak-in-sctp_v4_get_dst.patch
+mlxsw-spectrum_switchdev-check-success-of-fdb-add-operation.patch
+net-mlx5e-specify-numa-node-when-allocating-drop-rq.patch
+net-phy-fix-phy_start-to-consider-phy_ignore_interrupt.patch
+tcp-honor-the-eor-bit-in-tcp_mtu_probe.patch
+rxrpc-fix-send-in-rxrpc_send_data_packet.patch
+tcp_bbr-better-deal-with-suboptimal-gso.patch
+doc-change-the-min-default-value-of-tcp_wmem-tcp_rmem.patch
+net-mlx5e-fix-loopback-self-test-when-gro-is-off.patch
+net_sched-gen_estimator-fix-broken-estimators-based-on-percpu-stats.patch
+net-sched-cls_u32-fix-cls_u32-on-filter-replace.patch
+sctp-do-not-pr_err-for-the-duplicated-node-in-transport-rhlist.patch
+tcp-revert-f-rto-middle-box-workaround.patch
+tcp-revert-f-rto-extension-to-detect-more-spurious-timeouts.patch
+mlxsw-spectrum_router-fix-error-path-in-mlxsw_sp_vr_create.patch
+net-ipv4-set-addr_type-in-hash_keys-for-forwarded-case.patch
+sctp-fix-dst-refcnt-leak-in-sctp_v6_get_dst.patch
+bridge-fix-vlan-reference-count-problem.patch
+net-mlx5e-verify-inline-header-size-do-not-exceed-skb-linear-size.patch
+amd-xgbe-restore-pci-interrupt-enablement-setting-on-resume.patch
+cls_u32-fix-use-after-free-in-u32_destroy_key.patch
+mlxsw-spectrum_router-do-not-unconditionally-clear-route-offload-indication.patch
+netlink-put-module-reference-if-dump-start-fails.patch
+tcp-purge-write-queue-upon-rst.patch
+tuntap-correctly-add-the-missing-xdp-flush.patch
+tuntap-disable-preemption-during-xdp-processing.patch
+virtio-net-disable-napi-only-when-enabled-during-xdp-set.patch
+s390-qeth-fix-underestimated-count-of-buffer-elements.patch
+s390-qeth-fix-setip-command-handling.patch
+s390-qeth-fix-overestimated-count-of-buffer-elements.patch
+s390-qeth-fix-ip-removal-on-offline-cards.patch
+s390-qeth-fix-double-free-on-ip-add-remove-race.patch
+revert-s390-qeth-fix-using-of-ref-counter-for-rxip-addresses.patch
+s390-qeth-fix-ip-address-lookup-for-l3-devices.patch
+s390-qeth-fix-ipa-command-submission-race.patch
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Ilya Lesokhin <ilyal@mellanox.com>
+Date: Mon, 12 Feb 2018 12:57:04 +0200
+Subject: tcp: Honor the eor bit in tcp_mtu_probe
+
+From: Ilya Lesokhin <ilyal@mellanox.com>
+
+
+[ Upstream commit 808cf9e38cd7923036a99f459ccc8cf2955e47af ]
+
+Avoid SKB coalescing if eor bit is set in one of the relevant
+SKBs.
+
+Fixes: c134ecb87817 ("tcp: Make use of MSG_EOR in tcp_sendmsg")
+Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/tcp_output.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/net/ipv4/tcp_output.c
++++ b/net/ipv4/tcp_output.c
+@@ -1973,6 +1973,24 @@ static inline void tcp_mtu_check_reprobe
+ }
+ }
+
++static bool tcp_can_coalesce_send_queue_head(struct sock *sk, int len)
++{
++ struct sk_buff *skb, *next;
++
++ skb = tcp_send_head(sk);
++ tcp_for_write_queue_from_safe(skb, next, sk) {
++ if (len <= skb->len)
++ break;
++
++ if (unlikely(TCP_SKB_CB(skb)->eor))
++ return false;
++
++ len -= skb->len;
++ }
++
++ return true;
++}
++
+ /* Create a new MTU probe if we are ready.
+ * MTU probe is regularly attempting to increase the path MTU by
+ * deliberately sending larger packets. This discovers routing
+@@ -2045,6 +2063,9 @@ static int tcp_mtu_probe(struct sock *sk
+ return 0;
+ }
+
++ if (!tcp_can_coalesce_send_queue_head(sk, probe_size))
++ return -1;
++
+ /* We're allowed to probe. Build it now. */
+ nskb = sk_stream_alloc_skb(sk, probe_size, GFP_ATOMIC, false);
+ if (!nskb)
+@@ -2080,6 +2101,10 @@ static int tcp_mtu_probe(struct sock *sk
+ /* We've eaten all the data from this skb.
+ * Throw it away. */
+ TCP_SKB_CB(nskb)->tcp_flags |= TCP_SKB_CB(skb)->tcp_flags;
++ /* If this is the last SKB we copy and eor is set
++ * we need to propagate it to the new skb.
++ */
++ TCP_SKB_CB(nskb)->eor = TCP_SKB_CB(skb)->eor;
+ tcp_unlink_write_queue(skb, sk);
+ sk_wmem_free_skb(sk, skb);
+ } else {
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Soheil Hassas Yeganeh <soheil@google.com>
+Date: Tue, 27 Feb 2018 18:32:18 -0500
+Subject: tcp: purge write queue upon RST
+
+From: Soheil Hassas Yeganeh <soheil@google.com>
+
+
+[ Upstream commit a27fd7a8ed3856faaf5a2ff1c8c5f00c0667aaa0 ]
+
+When the connection is reset, there is no point in
+keeping the packets on the write queue until the connection
+is closed.
+
+RFC 793 (page 70) and RFC 793-bis (page 64) both suggest
+purging the write queue upon RST:
+https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07
+
+Moreover, this is essential for a correct MSG_ZEROCOPY
+implementation, because userspace cannot call close(fd)
+before receiving zerocopy signals even when the connection
+is reset.
+
+Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
+Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
+Reviewed-by: Eric Dumazet <edumazet@google.com>
+Signed-off-by: Yuchung Cheng <ycheng@google.com>
+Signed-off-by: Neal Cardwell <ncardwell@google.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/tcp_input.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -4011,6 +4011,7 @@ void tcp_reset(struct sock *sk)
+ /* This barrier is coupled with smp_rmb() in tcp_poll() */
+ smp_wmb();
+
++ tcp_write_queue_purge(sk);
+ tcp_done(sk);
+
+ if (!sock_flag(sk, SOCK_DEAD))
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Yuchung Cheng <ycheng@google.com>
+Date: Tue, 27 Feb 2018 14:15:02 -0800
+Subject: tcp: revert F-RTO extension to detect more spurious timeouts
+
+From: Yuchung Cheng <ycheng@google.com>
+
+
+[ Upstream commit fc68e171d376c322e6777a3d7ac2f0278b68b17f ]
+
+This reverts commit 89fe18e44f7ee5ab1c90d0dff5835acee7751427.
+
+While the patch could detect more spurious timeouts, it could cause
+poor TCP performance on broken middle-boxes that modifies TCP packets
+(e.g. receive window, SACK options). Since the performance gain is
+much smaller compared to the potential loss. The best solution is
+to fully revert the change.
+
+Fixes: 89fe18e44f7e ("tcp: extend F-RTO to catch more spurious timeouts")
+Reported-by: Teodor Milkov <tm@del.bg>
+Signed-off-by: Yuchung Cheng <ycheng@google.com>
+Signed-off-by: Neal Cardwell <ncardwell@google.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/tcp_input.c | 30 ++++++++++++------------------
+ 1 file changed, 12 insertions(+), 18 deletions(-)
+
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -1947,6 +1947,7 @@ void tcp_enter_loss(struct sock *sk)
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct net *net = sock_net(sk);
+ struct sk_buff *skb;
++ bool new_recovery = icsk->icsk_ca_state < TCP_CA_Recovery;
+ bool is_reneg; /* is receiver reneging on SACKs? */
+ bool mark_lost;
+
+@@ -2009,15 +2010,12 @@ void tcp_enter_loss(struct sock *sk)
+ tp->high_seq = tp->snd_nxt;
+ tcp_ecn_queue_cwr(tp);
+
+- /* F-RTO RFC5682 sec 3.1 step 1 mandates to disable F-RTO
+- * if a previous recovery is underway, otherwise it may incorrectly
+- * call a timeout spurious if some previously retransmitted packets
+- * are s/acked (sec 3.2). We do not apply that retriction since
+- * retransmitted skbs are permanently tagged with TCPCB_EVER_RETRANS
+- * so FLAG_ORIG_SACK_ACKED is always correct. But we do disable F-RTO
+- * on PTMU discovery to avoid sending new data.
++ /* F-RTO RFC5682 sec 3.1 step 1: retransmit SND.UNA if no previous
++ * loss recovery is underway except recurring timeout(s) on
++ * the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
+ */
+ tp->frto = sysctl_tcp_frto &&
++ (new_recovery || icsk->icsk_retransmits) &&
+ !inet_csk(sk)->icsk_mtup.probe_size;
+ }
+
+@@ -2696,18 +2694,14 @@ static void tcp_process_loss(struct sock
+ tcp_try_undo_loss(sk, false))
+ return;
+
+- /* The ACK (s)acks some never-retransmitted data meaning not all
+- * the data packets before the timeout were lost. Therefore we
+- * undo the congestion window and state. This is essentially
+- * the operation in F-RTO (RFC5682 section 3.1 step 3.b). Since
+- * a retransmitted skb is permantly marked, we can apply such an
+- * operation even if F-RTO was not used.
+- */
+- if ((flag & FLAG_ORIG_SACK_ACKED) &&
+- tcp_try_undo_loss(sk, tp->undo_marker))
+- return;
+-
+ if (tp->frto) { /* F-RTO RFC5682 sec 3.1 (sack enhanced version). */
++ /* Step 3.b. A timeout is spurious if not all data are
++ * lost, i.e., never-retransmitted data are (s)acked.
++ */
++ if ((flag & FLAG_ORIG_SACK_ACKED) &&
++ tcp_try_undo_loss(sk, true))
++ return;
++
+ if (after(tp->snd_nxt, tp->high_seq)) {
+ if (flag & FLAG_DATA_SACKED || is_dupack)
+ tp->frto = 0; /* Step 3.a. loss was real */
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Yuchung Cheng <ycheng@google.com>
+Date: Tue, 27 Feb 2018 14:15:01 -0800
+Subject: tcp: revert F-RTO middle-box workaround
+
+From: Yuchung Cheng <ycheng@google.com>
+
+
+[ Upstream commit d4131f09770d9b7471c9da65e6ecd2477746ac5c ]
+
+This reverts commit cc663f4d4c97b7297fb45135ab23cfd508b35a77. While fixing
+some broken middle-boxes that modifies receive window fields, it does not
+address middle-boxes that strip off SACK options. The best solution is
+to fully revert this patch and the root F-RTO enhancement.
+
+Fixes: cc663f4d4c97 ("tcp: restrict F-RTO to work-around broken middle-boxes")
+Reported-by: Teodor Milkov <tm@del.bg>
+Signed-off-by: Yuchung Cheng <ycheng@google.com>
+Signed-off-by: Neal Cardwell <ncardwell@google.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/tcp_input.c | 17 +++++++----------
+ 1 file changed, 7 insertions(+), 10 deletions(-)
+
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -1947,7 +1947,6 @@ void tcp_enter_loss(struct sock *sk)
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct net *net = sock_net(sk);
+ struct sk_buff *skb;
+- bool new_recovery = icsk->icsk_ca_state < TCP_CA_Recovery;
+ bool is_reneg; /* is receiver reneging on SACKs? */
+ bool mark_lost;
+
+@@ -2010,17 +2009,15 @@ void tcp_enter_loss(struct sock *sk)
+ tp->high_seq = tp->snd_nxt;
+ tcp_ecn_queue_cwr(tp);
+
+- /* F-RTO RFC5682 sec 3.1 step 1: retransmit SND.UNA if no previous
+- * loss recovery is underway except recurring timeout(s) on
+- * the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
+- *
+- * In theory F-RTO can be used repeatedly during loss recovery.
+- * In practice this interacts badly with broken middle-boxes that
+- * falsely raise the receive window, which results in repeated
+- * timeouts and stop-and-go behavior.
++ /* F-RTO RFC5682 sec 3.1 step 1 mandates to disable F-RTO
++ * if a previous recovery is underway, otherwise it may incorrectly
++ * call a timeout spurious if some previously retransmitted packets
++ * are s/acked (sec 3.2). We do not apply that retriction since
++ * retransmitted skbs are permanently tagged with TCPCB_EVER_RETRANS
++ * so FLAG_ORIG_SACK_ACKED is always correct. But we do disable F-RTO
++ * on PTMU discovery to avoid sending new data.
+ */
+ tp->frto = sysctl_tcp_frto &&
+- (new_recovery || icsk->icsk_retransmits) &&
+ !inet_csk(sk)->icsk_mtup.probe_size;
+ }
+
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Eric Dumazet <edumazet@google.com>
+Date: Wed, 21 Feb 2018 06:43:03 -0800
+Subject: tcp_bbr: better deal with suboptimal GSO
+
+From: Eric Dumazet <edumazet@google.com>
+
+
+[ Upstream commit 350c9f484bde93ef229682eedd98cd5f74350f7f ]
+
+BBR uses tcp_tso_autosize() in an attempt to probe what would be the
+burst sizes and to adjust cwnd in bbr_target_cwnd() with following
+gold formula :
+
+/* Allow enough full-sized skbs in flight to utilize end systems. */
+cwnd += 3 * bbr->tso_segs_goal;
+
+But GSO can be lacking or be constrained to very small
+units (ip link set dev ... gso_max_segs 2)
+
+What we really want is to have enough packets in flight so that both
+GSO and GRO are efficient.
+
+So in the case GSO is off or downgraded, we still want to have the same
+number of packets in flight as if GSO/TSO was fully operational, so
+that GRO can hopefully be working efficiently.
+
+To fix this issue, we make tcp_tso_autosize() unaware of
+sk->sk_gso_max_segs
+
+Only tcp_tso_segs() has to enforce the gso_max_segs limit.
+
+Tested:
+
+ethtool -K eth0 tso off gso off
+tc qd replace dev eth0 root pfifo_fast
+
+Before patch:
+for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
+ 691 (ss -temoi shows cwnd is stuck around 6 )
+ 667
+ 651
+ 631
+ 517
+
+After patch :
+# for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
+ 1733 (ss -temoi shows cwnd is around 386 )
+ 1778
+ 1746
+ 1781
+ 1718
+
+Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
+Signed-off-by: Eric Dumazet <edumazet@google.com>
+Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
+Acked-by: Neal Cardwell <ncardwell@google.com>
+Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/tcp_output.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+--- a/net/ipv4/tcp_output.c
++++ b/net/ipv4/tcp_output.c
+@@ -1681,7 +1681,7 @@ u32 tcp_tso_autosize(const struct sock *
+ */
+ segs = max_t(u32, bytes / mss_now, min_tso_segs);
+
+- return min_t(u32, segs, sk->sk_gso_max_segs);
++ return segs;
+ }
+ EXPORT_SYMBOL(tcp_tso_autosize);
+
+@@ -1693,8 +1693,10 @@ static u32 tcp_tso_segs(struct sock *sk,
+ const struct tcp_congestion_ops *ca_ops = inet_csk(sk)->icsk_ca_ops;
+ u32 tso_segs = ca_ops->tso_segs_goal ? ca_ops->tso_segs_goal(sk) : 0;
+
+- return tso_segs ? :
+- tcp_tso_autosize(sk, mss_now, sysctl_tcp_min_tso_segs);
++ if (!tso_segs)
++ tso_segs = tcp_tso_autosize(sk, mss_now,
++ sysctl_tcp_min_tso_segs);
++ return min_t(u32, tso_segs, sk->sk_gso_max_segs);
+ }
+
+ /* Returns the portion of skb which can be sent right away */
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Jason Wang <jasowang@redhat.com>
+Date: Sat, 24 Feb 2018 11:32:26 +0800
+Subject: tuntap: correctly add the missing XDP flush
+
+From: Jason Wang <jasowang@redhat.com>
+
+
+[ Upstream commit 1bb4f2e868a2891ab8bc668b8173d6ccb8c4ce6f ]
+
+We don't flush batched XDP packets through xdp_do_flush_map(), this
+will cause packets stall at TX queue. Consider we don't do XDP on NAPI
+poll(), the only possible fix is to call xdp_do_flush_map()
+immediately after xdp_do_redirect().
+
+Note, this in fact won't try to batch packets through devmap, we could
+address in the future.
+
+Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
+Fixes: 761876c857cb ("tap: XDP support")
+Signed-off-by: Jason Wang <jasowang@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/tun.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/tun.c
++++ b/drivers/net/tun.c
+@@ -1333,6 +1333,7 @@ static struct sk_buff *tun_build_skb(str
+ get_page(alloc_frag->page);
+ alloc_frag->offset += buflen;
+ err = xdp_do_redirect(tun->dev, &xdp, xdp_prog);
++ xdp_do_flush_map();
+ if (err)
+ goto err_redirect;
+ rcu_read_unlock();
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Jason Wang <jasowang@redhat.com>
+Date: Sat, 24 Feb 2018 11:32:25 +0800
+Subject: tuntap: disable preemption during XDP processing
+
+From: Jason Wang <jasowang@redhat.com>
+
+
+[ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ]
+
+Except for tuntap, all other drivers' XDP was implemented at NAPI
+poll() routine in a bh. This guarantees all XDP operation were done at
+the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But
+for tuntap, we do it in process context and we try to protect XDP
+processing by RCU reader lock. This is insufficient since
+CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which
+breaks the assumption that all XDP were processed in the same CPU.
+
+Fixing this by simply disabling preemption during XDP processing.
+
+Fixes: 761876c857cb ("tap: XDP support")
+Signed-off-by: Jason Wang <jasowang@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/tun.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/tun.c
++++ b/drivers/net/tun.c
+@@ -1315,6 +1315,7 @@ static struct sk_buff *tun_build_skb(str
+ else
+ *skb_xdp = 0;
+
++ preempt_disable();
+ rcu_read_lock();
+ xdp_prog = rcu_dereference(tun->xdp_prog);
+ if (xdp_prog && !*skb_xdp) {
+@@ -1337,6 +1338,7 @@ static struct sk_buff *tun_build_skb(str
+ if (err)
+ goto err_redirect;
+ rcu_read_unlock();
++ preempt_enable();
+ return NULL;
+ case XDP_TX:
+ xdp_xmit = true;
+@@ -1358,6 +1360,7 @@ static struct sk_buff *tun_build_skb(str
+ skb = build_skb(buf, buflen);
+ if (!skb) {
+ rcu_read_unlock();
++ preempt_enable();
+ return ERR_PTR(-ENOMEM);
+ }
+
+@@ -1370,10 +1373,12 @@ static struct sk_buff *tun_build_skb(str
+ skb->dev = tun->dev;
+ generic_xdp_tx(skb, xdp_prog);
+ rcu_read_unlock();
++ preempt_enable();
+ return NULL;
+ }
+
+ rcu_read_unlock();
++ preempt_enable();
+
+ return skb;
+
+@@ -1381,6 +1386,7 @@ err_redirect:
+ put_page(alloc_frag->page);
+ err_xdp:
+ rcu_read_unlock();
++ preempt_enable();
+ this_cpu_inc(tun->pcpu_stats->rx_dropped);
+ return NULL;
+ }
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+Date: Thu, 15 Feb 2018 20:18:43 +0300
+Subject: udplite: fix partial checksum initialization
+
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+
+
+[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ]
+
+Since UDP-Lite is always using checksum, the following path is
+triggered when calculating pseudo header for it:
+
+ udp4_csum_init() or udp6_csum_init()
+ skb_checksum_init_zero_check()
+ __skb_checksum_validate_complete()
+
+The problem can appear if skb->len is less than CHECKSUM_BREAK. In
+this particular case __skb_checksum_validate_complete() also invokes
+__skb_checksum_complete(skb). If UDP-Lite is using partial checksum
+that covers only part of a packet, the function will return bad
+checksum and the packet will be dropped.
+
+It can be fixed if we skip skb_checksum_init_zero_check() and only
+set the required pseudo header checksum for UDP-Lite with partial
+checksum before udp4_csum_init()/udp6_csum_init() functions return.
+
+Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4")
+Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6")
+Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ include/net/udplite.h | 1 +
+ net/ipv4/udp.c | 5 +++++
+ net/ipv6/ip6_checksum.c | 5 +++++
+ 3 files changed, 11 insertions(+)
+
+--- a/include/net/udplite.h
++++ b/include/net/udplite.h
+@@ -64,6 +64,7 @@ static inline int udplite_checksum_init(
+ UDP_SKB_CB(skb)->cscov = cscov;
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ skb->ip_summed = CHECKSUM_NONE;
++ skb->csum_valid = 0;
+ }
+
+ return 0;
+--- a/net/ipv4/udp.c
++++ b/net/ipv4/udp.c
+@@ -2032,6 +2032,11 @@ static inline int udp4_csum_init(struct
+ err = udplite_checksum_init(skb, uh);
+ if (err)
+ return err;
++
++ if (UDP_SKB_CB(skb)->partial_cov) {
++ skb->csum = inet_compute_pseudo(skb, proto);
++ return 0;
++ }
+ }
+
+ /* Note, we are only interested in != 0 or == 0, thus the
+--- a/net/ipv6/ip6_checksum.c
++++ b/net/ipv6/ip6_checksum.c
+@@ -73,6 +73,11 @@ int udp6_csum_init(struct sk_buff *skb,
+ err = udplite_checksum_init(skb, uh);
+ if (err)
+ return err;
++
++ if (UDP_SKB_CB(skb)->partial_cov) {
++ skb->csum = ip6_compute_pseudo(skb, proto);
++ return 0;
++ }
+ }
+
+ /* To support RFC 6936 (allow zero checksum in UDP/IPV6 for tunnels)
--- /dev/null
+From foo@baz Tue Mar 6 19:02:12 PST 2018
+From: Jason Wang <jasowang@redhat.com>
+Date: Wed, 28 Feb 2018 18:20:04 +0800
+Subject: virtio-net: disable NAPI only when enabled during XDP set
+
+From: Jason Wang <jasowang@redhat.com>
+
+
+[ Upstream commit 4e09ff5362843dff3accfa84c805c7f3a99de9cd ]
+
+We try to disable NAPI to prevent a single XDP TX queue being used by
+multiple cpus. But we don't check if device is up (NAPI is enabled),
+this could result stall because of infinite wait in
+napi_disable(). Fixing this by checking device state through
+netif_running() before.
+
+Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set")
+Signed-off-by: Jason Wang <jasowang@redhat.com>
+Acked-by: Michael S. Tsirkin <mst@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/virtio_net.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/virtio_net.c
++++ b/drivers/net/virtio_net.c
+@@ -1995,8 +1995,9 @@ static int virtnet_xdp_set(struct net_de
+ }
+
+ /* Make sure NAPI is not using any XDP TX queues for RX. */
+- for (i = 0; i < vi->max_queue_pairs; i++)
+- napi_disable(&vi->rq[i].napi);
++ if (netif_running(dev))
++ for (i = 0; i < vi->max_queue_pairs; i++)
++ napi_disable(&vi->rq[i].napi);
+
+ netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp);
+ err = _virtnet_set_queues(vi, curr_qp + xdp_qp);
+@@ -2015,7 +2016,8 @@ static int virtnet_xdp_set(struct net_de
+ }
+ if (old_prog)
+ bpf_prog_put(old_prog);
+- virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
++ if (netif_running(dev))
++ virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
+ }
+
+ return 0;
projects / thirdparty / kernel / stable-queue.git / commitdiff
