]> git.ipfire.org Git - thirdparty/u-boot.git/commitdiff
riscv: dts: starfive: add Milk-V Mars CM Lite system-on-module
authorE Shattow <e@freeshell.de>
Wed, 15 Oct 2025 10:22:53 +0000 (03:22 -0700)
committerLeo Yu-Chi Liang <ycliang@andestech.com>
Tue, 28 Oct 2025 11:29:43 +0000 (19:29 +0800)
Milk-V Mars CM Lite is a System-on-Module based on the Milk-V Mars CM
without the onboard eMMC storage component populated and configured
instead for SD3.0 Card Slot on that interface via 100-pin connector.

Link to Milk-V Mars CM Lite schematics: https://github.com/milkv-mars/mars-files/tree/main/Mars-CM_Hardware_Schematices
Link to StarFive JH7110 Technical Reference Manual: https://doc-en.rvspace.org/JH7110/TRM/index.html
Link to Raspberry Pi CM4IO datasheet: https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf

Add the devicetree file to make use of StarFive JH7110 common supported
features PMIC, EEPROM, UART, I2C, GPIO, PCIe, QSPI Flash, PWM, and
Ethernet. Also configure the eMMC interface mmc0 for SD Card use and
configure the common SD Card interface mmc1 for onboard SDIO BT+WiFi.

Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
[ upstream commit: 4cce8b2503ab50f75a2dbc3eef2e55722836588e ]

(cherry picked from commit c7821d537e5a61e5d543588674b71fb43ec0665b)

dts/upstream/src/riscv/starfive/jh7110-milkv-marscm-lite.dts [new file with mode: 0644]

diff --git a/dts/upstream/src/riscv/starfive/jh7110-milkv-marscm-lite.dts b/dts/upstream/src/riscv/starfive/jh7110-milkv-marscm-lite.dts
new file mode 100644 (file)
index 0000000..6c40d0e
--- /dev/null
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@freeshell.de>
+ */
+
+/dts-v1/;
+#include "jh7110-milkv-marscm.dtsi"
+
+/ {
+       model = "Milk-V Mars CM Lite";
+       compatible = "milkv,marscm-lite", "starfive,jh7110";
+};
+
+&mmc0 {
+       bus-width = <4>;
+       cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&mmc0_pins {
+       pwren-pins {
+               pinmux = <GPIOMUX(22, GPOUT_HIGH,
+                                     GPOEN_ENABLE,
+                                     GPI_NONE)>;
+       };
+};