zynq: Code clean up on board configs

This patch cleans up board configs:
- Fix tabs.
- Remove spaces.
- Add prints.
- Remove unneeded config.
- Give space.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

diff --git a/include/configs/zynq_common.h b/include/configs/zynq_common.h
index 91a5cd155ad282ec7cbc8f9759e7ff62df5dcbc0..2023fcf4809ab53879f3a73958bb4f998a749991 100644 (file)
--- a/include/configs/zynq_common.h
+++ b/include/configs/zynq_common.h
@@ -32,12 +32,13 @@
 
 /* Total Size of Environment Sector */
 #define CONFIG_ENV_SIZE                (128 << 10)
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 /* Serial drivers */
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 38400, 115200 }
 
 /* Zynq serial driver */
 #ifdef CONFIG_ZYNQ_SERIAL_UART0
@@ -99,29 +100,27 @@
 # undef CONFIG_CMD_NFS
 #endif
 
-/* NOR flash */
+/* NOR */
 #ifndef CONFIG_SYS_NO_FLASH
-# define CONFIG_SYS_FLASH_BASE           0xE2000000
-# define CONFIG_SYS_FLASH_SIZE           (16 * 1024 * 1024)
-# define CONFIG_SYS_MAX_FLASH_BANKS      1
+# define CONFIG_SYS_FLASH_BASE         0xE2000000
+# define CONFIG_SYS_FLASH_SIZE         (16 * 1024 * 1024)
+# define CONFIG_SYS_MAX_FLASH_BANKS    1
 /* max number of sectors/blocks on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT       512
-# define CONFIG_SYS_FLASH_ERASE_TOUT     1000
-# define CONFIG_SYS_FLASH_WRITE_TOUT     5000
+# define CONFIG_SYS_MAX_FLASH_SECT     512
+# define CONFIG_SYS_FLASH_ERASE_TOUT   1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT   5000
 # define CONFIG_FLASH_SHOW_PROGRESS    10
-
 # define CONFIG_SYS_FLASH_CFI
 # undef CONFIG_SYS_FLASH_EMPTY_INFO
 # define CONFIG_FLASH_CFI_DRIVER
-
 # undef CONFIG_SYS_FLASH_PROTECTION /* don't use hardware protection */
 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
 #endif
 
+/* QSPI */
 #ifdef CONFIG_ZYNQ_SPI
 # define CONFIG_SF_DEFAULT_SPEED       30000000
 # define CONFIG_SPI_FLASH
-/* # define CONFIG_SPI_FLASH_ATMEL */
 # define CONFIG_SPI_FLASH_SPANSION
 # define CONFIG_SPI_FLASH_STMICRO
 # define CONFIG_SPI_FLASH_WINBOND
@@ -129,6 +128,7 @@
 # define CONFIG_CMD_SF
 #endif
 
+/* MMC */
 #ifdef CONFIG_MMC
 # define CONFIG_GENERIC_MMC
 # define CONFIG_ZYNQ_MMC
@@ -140,6 +140,7 @@
 # define CONFIG_SYS_MMC_MAX_BLK_COUNT  1
 #endif
 
+/* NAND */
 #ifdef CONFIG_NAND_ZYNQ
 # define CONFIG_CMD_NAND
 # define CONFIG_CMD_NAND_LOCK_UNLOCK
@@ -241,8 +242,7 @@
                "bootm 0x3000000 0x2000000 0x2A00000\0"
 
 /* default boot is according to the bootmode switch settings */
-#define CONFIG_BOOTCOMMAND "run modeboot"
-
+#define CONFIG_BOOTCOMMAND     "run modeboot"
 #define CONFIG_BOOTDELAY       3 /* -1 to Disable autoboot */
 
 #define CONFIG_SYS_PROMPT      "zynq-uboot> "
@@ -254,9 +254,7 @@
 #define CONFIG_SYS_L2CACHE_OFF
 #define CONFIG_SYS_CACHELINE_SIZE      32
 
-/*
- * Physical Memory map
- */
+/* Physical Memory map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM_1                   0
 
@@ -280,7 +278,6 @@
 #define CONFIG_SYS_LOAD_ADDR   0 /* default? */
 
 /* Enable the PL to be downloaded */
-
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
@@ -294,7 +291,6 @@
 
 #undef CONFIG_BOOTM_NETBSD
 
-
 /* FIXME this should be removed pretty soon */
 #define XPSS_QSPI_BASEADDR             0xE000D000
 #define SD_BASEADDR                    0xE0100000

diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index 8cd46d9e58d258b609ff21166b1e39991ec13c29..0fc6abccc270ce239eb246179bf4ae10ede19745 100644 (file)
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -27,7 +27,6 @@
 #define CONFIG_XGMAC_PHY_ADDR CONFIG_PHY_ADDR
 #define CONFIG_SYS_ENET
 
-
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_MMC

diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
index 43d8900804cfda7a1803309fe577ee6b181e922f..b09ac3cf3b4f6b1cdc759a453a588cd53a25c7b0 100644 (file)
--- a/include/configs/zynq_zc770.h
+++ b/include/configs/zynq_zc770.h
@@ -55,7 +55,6 @@
 # define CONFIG_ZYNQ_SERIAL_UART0
 #endif
 
-
 #include <configs/zynq_common.h>
 
 /* Place a Xilinx Boot ROM header in u-boot image? */