--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+ model = "D-Link AQUILA PRO AI E30 A1";
+ compatible = "dlink,aquila-pro-ai-e30-a1", "mediatek,mt7981";
+
+ aliases {
+ label-mac-device = &gmac1;
+ led-boot = &led_status_white;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_white;
+ led-upgrade = &led_status_blue;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ label = "lan";
+
+ nvmem-cells = <&macaddr_odm 0>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+
+ spi-max-frequency = <52000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "BL2";
+ reg = <0x00 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x200000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x1000>;
+ };
+ };
+ };
+
+ partition@380000 {
+ label = "FIP";
+ reg = <0x380000 0x200000>;
+ read-only;
+ };
+
+ partition@580000 {
+ label = "ubi";
+ reg = <0x580000 0x3200000>;
+ };
+
+ partition@3780000 {
+ label = "ubi1";
+ reg = <0x3780000 0x3200000>;
+ read-only;
+ };
+
+ partition@6980000 {
+ label = "Odm";
+ reg = <0x6980000 0x40000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_odm: macaddr@8f {
+ compatible = "mac-base";
+ reg = <0x8f 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+
+ };
+
+ partition@69c0000 {
+ label = "Config1";
+ reg = <0x69c0000 0x80000>;
+ read-only;
+ };
+
+ partition@6a40000 {
+ label = "Config2";
+ reg = <0x6a40000 0x80000>;
+ read-only;
+ };
+
+ partition@6ac0000 {
+ label = "Storage";
+ reg = <0x6ac0000 0xA00000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
+ };
+ };
+
+ i2c_pins_g0: i2c-pins-g0 {
+ mux {
+ function = "i2c";
+ groups = "i2c0_1";
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+
+ nvmem-cells = <&eeprom_factory_0>, <&macaddr_odm 1>;
+ nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_g0>;
+
+ gca230718@40 {
+ compatible = "unknown,gca230718";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40>;
+
+ led_status_red: led@0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ reg = <0>;
+ };
+
+ led@1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ reg = <1>;
+ };
+
+ led_status_blue: led@2 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ reg = <2>;
+ };
+
+ led_status_white: led@3 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
+ reg = <3>;
+ };
+ };
+};
endef
TARGET_DEVICES += cudy_wbr3000uax-v1-ubootmod
+define Device/dlink_aquila-pro-ai-e30-a1
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := AQUILA PRO AI E30
+ DEVICE_VARIANT := A1
+ DEVICE_DTS := mt7981b-dlink-aquila-pro-ai-e30-a1
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-leds-gca230718 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
+ KERNEL_IN_UBI := 1
+ IMAGE_SIZE := 51200k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ifeq ($(IB),)
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ IMAGES += recovery.bin
+ IMAGE/recovery.bin := append-image-stage initramfs-kernel.bin | sysupgrade-tar kernel=$$$$@ |\
+ pad-to $$(IMAGE_SIZE) | dlink-ai-recovery-header DLK6E6110002 \x6A\x28\xEE\x0B \x00\x00\x2C\x00 \x00\x00\x20\x03 \x61\x6E
+endif
+endif
+endef
+TARGET_DEVICES += dlink_aquila-pro-ai-e30-a1
+
define Device/dlink_aquila-pro-ai-m30-a1
DEVICE_VENDOR := D-Link
DEVICE_MODEL := AQUILA PRO AI M30
projects / thirdparty / openwrt.git / commitdiff
