CPU_TYPE:=fa526
SUBTARGETS:=generic
-KERNEL_PATCHVER:=6.12
-KERNEL_TESTING_PATCHVER:=6.18
+KERNEL_PATCHVER:=6.18
define Target/Description
Build firmware images for the StorLink/Cortina Gemini CS351x ARM FA526 CPU
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AMBA_PL08X=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_GEMINI=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MOXART is not set
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-# CONFIG_ARCH_MULTI_V5 is not set
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_FORCE=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BOUNCE=y
-CONFIG_BUFFER_HEAD=y
-CONFIG_CACHESTAT_SYSCALL=y
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_PERCENTAGE=10
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-# CONFIG_CMA_SIZE_SEL_MBYTES is not set
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
-# CONFIG_CMA_SYSFS is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_GEMINI=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MITIGATIONS=y
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_FA=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SL3516=y
-# CONFIG_CRYPTO_DEV_SL3516_DEBUG is not set
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_ENGINE=y
-CONFIG_CRYPTO_GENIV=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
-CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
-CONFIG_CRYPTO_JITTERENTROPY_OSR=1
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_GF128MUL=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LIB_UTILS=y
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
-# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA3=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_USER=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_NEED_SYNC=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS_HELPERS=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_GEM_DMA_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ILITEK_IL9322=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TVE200=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_ELF_CORE=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-# CONFIG_EXPERT is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_FARADAY_FTINTC010=y
-CONFIG_FB=y
-CONFIG_FB_CORE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_DMAMEM_HELPERS=y
-CONFIG_FB_DMAMEM_HELPERS_DEFERRED=y
-CONFIG_FB_SYSMEM_FOPS=y
-CONFIG_FB_SYSMEM_HELPERS=y
-CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FORCE_NR_CPUS=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FTTMR010_TIMER=y
-CONFIG_FTWDT010_WATCHDOG=y
-CONFIG_FUNCTION_ALIGNMENT=0
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GEMINI_ETHERNET=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_DEVICES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_FTGPIO010=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_IO_URING=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQSTACKS=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KCMP=y
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_DLINK_DIR685=y
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_LDM_PARTITION=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_LAZY_TLB_REFCOUNT=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_MQ_IOSCHED_DEADLINE=y
-CONFIG_MQ_IOSCHED_KYBER=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_GEMINI=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_OPENWRT_PROLOG=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVMEM=y
-CONFIG_NET_EGRESS=y
-CONFIG_NET_INGRESS=y
-CONFIG_NET_NS=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_XGRESS=y
-CONFIG_NLS=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PATA_FTIDE010=y
-CONFIG_PCI=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_FTPCI100=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_GEMINI=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GEMINI_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REALTEK_PHY_HWMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_FTRTC010=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RTC_NVMEM=y
-CONFIG_SATA_GEMINI=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SENSORS_DRIVETEMP=y
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PCILIB=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_STACKDEPOT=y
-CONFIG_STACKTRACE=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_COMMON=y
-# CONFIG_USB_FOTG210 is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VIDEO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARM64=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_RISCV=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From 771db4a77c5fb6da4908825e65f500ad67f86e5f Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Fri, 23 Jan 2026 16:24:49 +0100
-Subject: [PATCH] ARM: dts: gemini: Fix partition offsets
-
-These FIS partition offsets were never right: the comment clearly
-states the FIS index is at 0xfe0000 and 0x7f * 0x200000 is
-0xfe0000.
-
-Tested on the iTian SQ201.
-
-Fixes: d88b11ef91b1 ("ARM: dts: Fix up SQ201 flash access")
-Fixes: b5a923f8c739 ("ARM: dts: gemini: Switch to redboot partition parsing")
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-sl93512r.dts | 2 +-
- arch/arm/boot/dts/gemini/gemini-sq201.dts | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
-@@ -146,7 +146,7 @@
- partitions {
- compatible = "redboot-fis";
- /* Eraseblock at 0xfe0000 */
-- fis-index-block = <0x1fc>;
-+ fis-index-block = <0x7f>;
- };
- };
-
---- a/arch/arm/boot/dts/gemini/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
-@@ -134,7 +134,7 @@
- partitions {
- compatible = "redboot-fis";
- /* Eraseblock at 0xfe0000 */
-- fis-index-block = <0x1fc>;
-+ fis-index-block = <0x7f>;
- };
- };
-
+++ /dev/null
-From 46267aeb78cc7aba845da4c17acff1d46b694647 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Wed, 14 Jan 2026 09:29:48 +0100
-Subject: [PATCH 1/2] ARM: dts: Add a Verbatim Gigabit NAS DTS
-
-This adds a device tree for the Verbatim S08V1901-D1 NAS
-which also has the product names "Gigabit Network Hard Drive"
-"Gigabit NAS" and maybe other names.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/Makefile | 1 +
- .../gemini/gemini-verbatim-s08v1901-d1.dts | 225 ++++++++++++++++++
- 2 files changed, 226 insertions(+)
- create mode 100644 arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
-
---- a/arch/arm/boot/dts/gemini/Makefile
-+++ b/arch/arm/boot/dts/gemini/Makefile
-@@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
- gemini-sl93512r.dtb \
- gemini-sq201.dtb \
- gemini-ssi1328.dtb \
-+ gemini-verbatim-s08v1901-d1.dtb \
- gemini-wbd111.dtb \
- gemini-wbd222.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
-@@ -0,0 +1,225 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Device Tree file for the Verbatim S08V1901-D1
-+ * on product packaging called "Verbatim Gigabit Ethernet Hard Drive"
-+ */
-+
-+/dts-v1/;
-+
-+#include "gemini.dtsi"
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Verbatim Gigabit Ethernet Hard Drive S08V1901-D1";
-+ compatible = "verbatim,s08v1901-d1", "cortina,gemini";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ memory@0 {
-+ /* 64MB SDRAM in 2 x Hynix HY5DU561622ETP-D43 */
-+ device_type = "memory";
-+ reg = <0x00000000 0x4000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
-+ stdout-path = &uart0;
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+
-+ button-reset {
-+ debounce-interval = <50>;
-+ wakeup-source;
-+ linux,code = <KEY_RESTART>;
-+ label = "reset";
-+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ led-green-harddisk {
-+ function = LED_FUNCTION_DISK_ACTIVITY;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-+ default-state = "off";
-+ linux,default-trigger = "disk-activity";
-+ };
-+ };
-+
-+ /*
-+ * Fan control candidates: gpio0 10, gpio1 28
-+ */
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ /* Uses MDC and MDIO */
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* This is a Realtek RTL8211CL ethernet PHY */
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ /*
-+ * I haven't found a way to control the fan, it appears to be
-+ * always on.
-+ */
-+ thermal-zones {
-+ chassis-thermal {
-+ /* Poll every 20 seconds */
-+ polling-delay = <20000>;
-+ /* Poll every 2nd second when cooling */
-+ polling-delay-passive = <2000>;
-+ /* Use the thermal sensor in the hard drive */
-+ thermal-sensors = <&drive0>;
-+
-+ /* Tripping points from the fan.script in the rootfs */
-+ trips {
-+ alert: chassis-alert {
-+ /* At 43 degrees turn on the fan */
-+ temperature = <43000>;
-+ hysteresis = <3000>;
-+ type = "active";
-+ };
-+ crit: chassis-crit {
-+ /* Just shut down at 60 degrees */
-+ temperature = <60000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+ };
-+
-+ soc {
-+ flash@30000000 {
-+ /*
-+ * This is a Spansion S29GL128P11TFI01 852FB245 A
-+ * 128Mbit (16MB) Flash memory.
-+ */
-+ status = "okay";
-+ reg = <0x30000000 0x01000000>;
-+
-+ partitions {
-+ compatible = "redboot-fis";
-+ /* Eraseblock at 0xfe0000 */
-+ fis-index-block = <0x7f>;
-+ };
-+ };
-+
-+ syscon: syscon@40000000 {
-+ pinctrl {
-+ /*
-+ * gpio0agrp cover line 0-4 as line 1 is used for the LED
-+ * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
-+ */
-+ gpio0_default_pins: pinctrl-gpio0 {
-+ mux {
-+ function = "gpio0";
-+ groups = "gpio0agrp", "gpio0hgrp";
-+ };
-+ };
-+ gpio1_default_pins: pinctrl-gpio1 {
-+ /*
-+ * Free up the TVC pins at GPIO1 offset 28,29,30,31
-+ * line 31 is used for reset key
-+ */
-+ mux {
-+ function = "gpio1";
-+ groups = "gpio1dgrp";
-+ };
-+ };
-+ pinctrl-gmii {
-+ mux {
-+ function = "gmii";
-+ groups = "gmii_gmac0_grp";
-+ };
-+ /* TODO: investigate vendor registers on boot */
-+ conf0 {
-+ pins = "V8 GMAC0 RXDV";
-+ skew-delay = <0>;
-+ };
-+ conf1 {
-+ pins = "Y7 GMAC0 RXC";
-+ skew-delay = <15>;
-+ };
-+ conf2 {
-+ pins = "T8 GMAC0 TXEN";
-+ skew-delay = <7>;
-+ };
-+ conf3 {
-+ pins = "U8 GMAC0 TXC";
-+ skew-delay = <10>;
-+ };
-+ conf4 {
-+ /* The data lines all have default skew */
-+ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
-+ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
-+ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
-+ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3";
-+ skew-delay = <7>;
-+ };
-+ };
-+ };
-+ };
-+
-+ /* Both interfaces brought out on SATA connectors */
-+ sata: sata@46000000 {
-+ cortina,gemini-ata-muxmode = <0>;
-+ cortina,gemini-enable-sata-bridge;
-+ status = "okay";
-+ };
-+
-+ gpio0: gpio@4d000000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gpio0_default_pins>;
-+ };
-+
-+ gpio1: gpio@4e000000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gpio1_default_pins>;
-+ };
-+
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+ };
-+
-+ ide@63000000 {
-+ status = "okay";
-+ /*
-+ * This drive may have a temperature sensor with a
-+ * thermal zone we can use for thermal control of the
-+ * chassis temperature using the fan.
-+ */
-+ drive0: ide-port@0 {
-+ reg = <0>;
-+ #thermal-sensor-cells = <0>;
-+ };
-+ };
-+
-+ ide@63400000 {
-+ status = "okay";
-+ };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
-+ };
-+};
+++ /dev/null
-From e6619c1d068dea0d4d29cf770a85bb8bfcfd104b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Thu, 12 Feb 2026 00:17:53 +0100
-Subject: [PATCH 1/2] ARM: dts: Add a Raidsonic IB-4210-B DTS
-
-This adds a device tree for the Raidsonic IB-4210-B NAS, a slightly
-under-powered version of IB-4220-B with half the memory and
-the cheaper version of the SoC.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/Makefile | 1 +
- arch/arm/boot/dts/gemini/gemini-nas4210b.dts | 205 +++++++++++++++++++
- 2 files changed, 206 insertions(+)
- create mode 100644 arch/arm/boot/dts/gemini/gemini-nas4210b.dts
-
---- a/arch/arm/boot/dts/gemini/Makefile
-+++ b/arch/arm/boot/dts/gemini/Makefile
-@@ -2,6 +2,7 @@
- dtb-$(CONFIG_ARCH_GEMINI) += \
- gemini-dlink-dir-685.dtb \
- gemini-dlink-dns-313.dtb \
-+ gemini-nas4210b.dtb \
- gemini-nas4220b.dtb \
- gemini-ns2502.dtb \
- gemini-rut1xx.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
-@@ -0,0 +1,205 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Device Tree file for the Gemini-based Raidsonic NAS IB-4210-B
-+ * Based on the NAS Forum experiments by user "CptSpock".
-+ */
-+
-+/dts-v1/;
-+
-+#include "gemini.dtsi"
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Raidsonic NAS IB-4210-B";
-+ compatible = "raidsonic,ib-4210-b", "cortina,gemini";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ memory@0 { /* 64 MB */
-+ device_type = "memory";
-+ reg = <0x00000000 0x4000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
-+ stdout-path = &uart0;
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+
-+ button-setup {
-+ debounce-interval = <100>;
-+ wakeup-source;
-+ linux,code = <KEY_SETUP>;
-+ label = "Backup button";
-+ /* Conflict with TVC */
-+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-+ };
-+ button-restart {
-+ debounce-interval = <100>;
-+ wakeup-source;
-+ linux,code = <KEY_RESTART>;
-+ label = "Softreset button";
-+ /* Conflict with TVC */
-+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ led-orange-hdd {
-+ label = "nas4220b:orange:hdd";
-+ /* Conflict with TVC */
-+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ linux,default-trigger = "disk-activity";
-+ };
-+ led-green-os {
-+ label = "nas4220b:green:os";
-+ /* Conflict with TVC */
-+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* Realtek RTL8211B */
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ device_type = "ethernet-phy";
-+ };
-+ };
-+
-+ soc {
-+ flash@30000000 {
-+ status = "okay";
-+ /* 16MB of flash */
-+ reg = <0x30000000 0x01000000>;
-+
-+ partitions {
-+ compatible = "redboot-fis";
-+ /* Eraseblock at 0xfe0000 */
-+ fis-index-block = <0x7f>;
-+ };
-+ };
-+
-+ syscon: syscon@40000000 {
-+ pinctrl {
-+ gpio0_default_pins: pinctrl-gpio0 {
-+ mux {
-+ function = "gpio0";
-+ groups =
-+ "gpio0egrp",
-+ /* Used by MDIO */
-+ "gpio0igrp";
-+ };
-+ };
-+ gpio1_default_pins: pinctrl-gpio1 {
-+ mux {
-+ function = "gpio1";
-+ /* Lines 28-31 used by LEDs and buttons */
-+ groups = "gpio1dgrp";
-+ };
-+ };
-+ pinctrl-gmii {
-+ mux {
-+ function = "gmii";
-+ groups = "gmii_gmac0_grp";
-+ };
-+ conf0 {
-+ pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
-+ skew-delay = <0>;
-+ };
-+ conf1 {
-+ pins = "T8 GMAC0 RXC";
-+ skew-delay = <10>;
-+ };
-+ conf2 {
-+ pins = "T11 GMAC1 RXC";
-+ skew-delay = <15>;
-+ };
-+ conf3 {
-+ pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
-+ skew-delay = <7>;
-+ };
-+ conf4 {
-+ pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
-+ skew-delay = <10>;
-+ };
-+ conf5 {
-+ /* The data lines all have default skew */
-+ pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
-+ "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
-+ "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
-+ "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
-+ "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
-+ "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
-+ skew-delay = <7>;
-+ };
-+ conf6 {
-+ pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
-+ "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
-+ skew-delay = <5>;
-+ };
-+ /* Set up drive strength on GMAC0 to 16 mA */
-+ conf7 {
-+ groups = "gmii_gmac0_grp";
-+ drive-strength = <16>;
-+ };
-+ };
-+ };
-+ };
-+
-+ sata: sata@46000000 {
-+ cortina,gemini-ata-muxmode = <0>;
-+ cortina,gemini-enable-sata-bridge;
-+ status = "okay";
-+ };
-+
-+ gpio0: gpio@4d000000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gpio0_default_pins>;
-+ };
-+
-+ gpio1: gpio@4e000000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gpio1_default_pins>;
-+ };
-+
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+ ethernet-port@1 {
-+ /* Not used in this platform */
-+ };
-+ };
-+
-+ ide@63000000 {
-+ status = "okay";
-+ };
-+
-+ ide@63400000 {
-+ status = "okay";
-+ };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
-+ };
-+};
+++ /dev/null
-From 1cf93e2435f0d7a7e8c9fd0d4355e6a521f72fc1 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Sat, 14 Feb 2026 00:12:51 +0100
-Subject: [PATCH 1/2] ARM: dts: gemini: Correct the RUT1xx
-
-Fix two problems with the RUT1xx device tree:
-- The memory is 32MB not 128MB
-- The console is 19200 BPS
-- Activate the PCI
-- Disable the unused USB ports
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-rut1xx.dts | 18 +++++++-----------
- 1 file changed, 7 insertions(+), 11 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
-@@ -14,13 +14,13 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-- memory@0 { /* 128 MB */
-+ memory@0 { /* 32 MB */
- device_type = "memory";
-- reg = <0x00000000 0x8000000>;
-+ reg = <0x00000000 0x2000000>;
- };
-
- chosen {
-- bootargs = "console=ttyS0,115200n8";
-+ bootargs = "console=ttyS0,19200n8";
- stdout-path = &uart0;
- };
-
-@@ -113,6 +113,10 @@
- pinctrl-0 = <&gpio1_default_pins>;
- };
-
-+ pci@50000000 {
-+ status = "okay";
-+ };
-+
- ethernet@60000000 {
- status = "okay";
-
-@@ -124,13 +128,5 @@
- /* Not used in this platform */
- };
- };
--
-- usb@68000000 {
-- status = "okay";
-- };
--
-- usb@69000000 {
-- status = "okay";
-- };
- };
- };
+++ /dev/null
-From 0890faebd0155f57ef34fb1e766fd3ed8a127595 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 11 Mar 2019 15:44:29 +0100
-Subject: [PATCH 2/2] ARM: dts: Augment DIR-685 partition table for OpenWrt
-
-Rename the firmware partition so that the firmware MTD
-splitter will do its job, drop the rootfs arguments as
-the MTD splitter will set this up automatically.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
-+ bootargs = "console=ttyS0,19200n8 consoleblank=300";
- stdout-path = "uart0:19200n8";
- };
-
-@@ -317,9 +317,9 @@
- * this is called "upgrade" on the vendor system.
- */
- partition@40000 {
-- label = "upgrade";
-+ compatible = "wrg";
-+ label = "firmware";
- reg = <0x00040000 0x01f40000>;
-- read-only;
- };
- /* RGDB, Residental Gateway Database? */
- partition@1f80000 {
+++ /dev/null
-From a4ea0ccf0f630b5fb0ccd2ddbb237c37ef0fc5a9 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Mon, 26 Jan 2026 08:14:22 +0100
-Subject: [PATCH] ARM: dts: gemini: Tag disk led for disk-activity
-
-Linux now has a trigger specifically for all disk activity
-and this is what the LED is used for so tag it like such.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-nas4220b.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
-@@ -52,6 +52,7 @@
- /* Conflict with TVC */
- gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- default-state = "on";
-+ linux,default-trigger = "disk-activity";
- };
- led-green-os {
- label = "nas4220b:green:os";
+++ /dev/null
-From 1b5c6be7b6dc6c096e1fd55ce10809d350e3afab Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Mon, 26 Jan 2026 08:09:04 +0100
-Subject: [PATCH] gemini: augment DTS with botched partitions
-
-We override the RedBoot FIS partition table with a custom one
-using fixed-partitions.
-
-Mostly this is a 1-to-1 copy, but the three partitions called
-"Kern", "Ramdisk" and "Application" are combined into one
-called "firmware" which is optimal for OpenWrt.
-
-The RedBoot bootloader still sees the three partitions and will
-load the first two into memory to boot the system, which
-is fine: the kernel will still be there.
-
-To avoid confusing the MTD partition splitter we also need to
-remove any command line root partition arguments.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-nas4220b.dts | 39 ++++++++++++++++++--
- 1 file changed, 35 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
-+ bootargs = "console=ttyS0,19200n8";
- stdout-path = &uart0;
- };
-
-@@ -82,10 +82,41 @@
- /* 16MB of flash */
- reg = <0x30000000 0x01000000>;
-
-+ /*
-+ * Override the RedBoot partition table with fixed partitions
-+ * in order to create a coherent "firmware" partition so that
-+ * we can have optimal flash usage with OpenWrt in a big
-+ * MTD-splitted "firmware" partition.
-+ */
- partitions {
-- compatible = "redboot-fis";
-- /* Eraseblock at 0xfe0000 */
-- fis-index-block = <0x7f>;
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@0 {
-+ label = "BOOT";
-+ reg = <0x00000000 0x00020000>;
-+ read-only;
-+ };
-+ partition@1 {
-+ compatible = "openwrt,executable-prolog";
-+ label = "firmware";
-+ reg = <0x00020000 0x00f00000>;
-+ };
-+ partition@2 {
-+ label = "VCTL";
-+ reg = <0x00f20000 0x00020000>;
-+ read-only;
-+ };
-+ partition@3 {
-+ label = "CurConf";
-+ reg = <0x00f40000 0x000a0000>;
-+ read-only;
-+ };
-+ partition@4 {
-+ label = "FIS directory";
-+ reg = <0x00fe0000 0x00020000>;
-+ read-only;
-+ };
- };
- };
-
+++ /dev/null
-From e0881008b49ecbec1c88f1f96c62a6a37c808df4 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Sun, 1 Feb 2026 00:21:08 +0100
-Subject: [PATCH] gemini: augment SQ201 DTS with botched partitions
-
-Same botched partitions as the Raidsonic IB-4220-B.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-sq201.dts | 39 ++++++++++++++++++++---
- 1 file changed, 35 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
-+ bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
-@@ -131,10 +131,41 @@
- /* 16MB of flash */
- reg = <0x30000000 0x01000000>;
-
-+ /*
-+ * Override the RedBoot partition table with fixed partitions
-+ * in order to create a coherent "firmware" partition so that
-+ * we can have optimal flash usage with OpenWrt in a big
-+ * MTD-splitted "firmware" partition.
-+ */
- partitions {
-- compatible = "redboot-fis";
-- /* Eraseblock at 0xfe0000 */
-- fis-index-block = <0x7f>;
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@0 {
-+ label = "BOOT";
-+ reg = <0x00000000 0x00016000>;
-+ read-only;
-+ };
-+ partition@1 {
-+ compatible = "openwrt,executable-prolog";
-+ label = "firmware";
-+ reg = <0x00120000 0x00e00000>;
-+ };
-+ partition@2 {
-+ label = "VCTL";
-+ reg = <0x00f20000 0x00020000>;
-+ read-only;
-+ };
-+ partition@3 {
-+ label = "CurConf";
-+ reg = <0x00f40000 0x000a0000>;
-+ read-only;
-+ };
-+ partition@4 {
-+ label = "FIS directory";
-+ reg = <0x00fe0000 0x00020000>;
-+ read-only;
-+ };
- };
- };
-
+++ /dev/null
-From b5732601a7ff5457cb1e3a9389761aa23a81f54d Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Sun, 1 Feb 2026 10:20:56 +0100
-Subject: [PATCH] gemini: augment SL93512R DTS with botched partitions
-
-Same botched partitions as the Raidsonic IB-4220-B.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-sl93512r.dts | 39 ++++++++++++++++++--
- 1 file changed, 35 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
-@@ -24,7 +24,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
-+ bootargs = "console=ttyS0,19200n8";
- stdout-path = &uart0;
- };
-
-@@ -143,10 +143,41 @@
- /* 16MB of flash */
- reg = <0x30000000 0x01000000>;
-
-+ /*
-+ * Override the RedBoot partition table with fixed partitions
-+ * in order to create a coherent "firmware" partition so that
-+ * we can have optimal flash usage with OpenWrt in a big
-+ * MTD-splitted "firmware" partition.
-+ */
- partitions {
-- compatible = "redboot-fis";
-- /* Eraseblock at 0xfe0000 */
-- fis-index-block = <0x7f>;
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@0 {
-+ label = "BOOT";
-+ reg = <0x00000000 0x00020000>;
-+ read-only;
-+ };
-+ partition@1 {
-+ compatible = "openwrt,executable-prolog";
-+ label = "firmware";
-+ reg = <0x00020000 0x00f00000>;
-+ };
-+ partition@2 {
-+ label = "VCTL";
-+ reg = <0x00f20000 0x00020000>;
-+ read-only;
-+ };
-+ partition@3 {
-+ label = "CurConf";
-+ reg = <0x00f40000 0x000a0000>;
-+ read-only;
-+ };
-+ partition@4 {
-+ label = "FIS directory";
-+ reg = <0x00fe0000 0x00020000>;
-+ read-only;
-+ };
- };
- };
-
+++ /dev/null
-From 590d33c31529aae924fc38e356e93beca684e3be Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Sun, 1 Feb 2026 23:10:25 +0100
-Subject: [PATCH 2/2] gemini: augment Verbatim DTS with botched partitions
-
-Same botched partitions as the Raidsonic IB-4220-B.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- .../gemini/gemini-verbatim-s08v1901-d1.dts | 39 +++++++++++++++++--
- 1 file changed, 35 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts
-@@ -23,7 +23,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
-+ bootargs = "console=ttyS0,19200n8";
- stdout-path = &uart0;
- };
-
-@@ -108,10 +108,41 @@
- status = "okay";
- reg = <0x30000000 0x01000000>;
-
-+ /*
-+ * Override the RedBoot partition table with fixed partitions
-+ * in order to create a coherent "firmware" partition so that
-+ * we can have optimal flash usage with OpenWrt in a big
-+ * MTD-splitted "firmware" partition.
-+ */
- partitions {
-- compatible = "redboot-fis";
-- /* Eraseblock at 0xfe0000 */
-- fis-index-block = <0x7f>;
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@0 {
-+ label = "BOOT";
-+ reg = <0x00000000 0x00020000>;
-+ read-only;
-+ };
-+ partition@1 {
-+ compatible = "openwrt,executable-prolog";
-+ label = "firmware";
-+ reg = <0x00020000 0x00f00000>;
-+ };
-+ partition@2 {
-+ label = "VCTL";
-+ reg = <0x00f20000 0x00020000>;
-+ read-only;
-+ };
-+ partition@3 {
-+ label = "CurConf";
-+ reg = <0x00f40000 0x000a0000>;
-+ read-only;
-+ };
-+ partition@4 {
-+ label = "FIS directory";
-+ reg = <0x00fe0000 0x00020000>;
-+ read-only;
-+ };
- };
- };
-
+++ /dev/null
-From fdfaeca6b5eed05e446f298c5e597df39b96629a Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Thu, 12 Feb 2026 00:22:30 +0100
-Subject: [PATCH 2/2] gemini: augment NAS4210 DTS with botched partitions
-
-Same botched partitions as the Raidsonic IB-4220-B.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-nas4210b.dts | 37 ++++++++++++++++++--
- 1 file changed, 34 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
-@@ -84,10 +84,41 @@
- /* 16MB of flash */
- reg = <0x30000000 0x01000000>;
-
-+ /*
-+ * Override the RedBoot partition table with fixed partitions
-+ * in order to create a coherent "firmware" partition so that
-+ * we can have optimal flash usage with OpenWrt in a big
-+ * MTD-splitted "firmware" partition.
-+ */
- partitions {
-- compatible = "redboot-fis";
-- /* Eraseblock at 0xfe0000 */
-- fis-index-block = <0x7f>;
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@0 {
-+ label = "BOOT";
-+ reg = <0x00000000 0x00020000>;
-+ read-only;
-+ };
-+ partition@1 {
-+ compatible = "openwrt,executable-prolog";
-+ label = "firmware";
-+ reg = <0x00020000 0x00f00000>;
-+ };
-+ partition@2 {
-+ label = "VCTL";
-+ reg = <0x00f20000 0x00020000>;
-+ read-only;
-+ };
-+ partition@3 {
-+ label = "CurConf";
-+ reg = <0x00f40000 0x000a0000>;
-+ read-only;
-+ };
-+ partition@4 {
-+ label = "FIS directory";
-+ reg = <0x00fe0000 0x00020000>;
-+ read-only;
-+ };
- };
- };
-
+++ /dev/null
-From 0b6bed71689664080e1e9ec95aecf45279dde6ee Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linusw@kernel.org>
-Date: Sat, 14 Feb 2026 00:21:13 +0100
-Subject: [PATCH 2/2] gemini: augment RUT1xx DTS with botched partitions
-
-Same botched partitions as the Raidsonic IB-4220-B.
-
-Signed-off-by: Linus Walleij <linusw@kernel.org>
----
- arch/arm/boot/dts/gemini/gemini-rut1xx.dts | 37 +++++++++++++++++++++-
- 1 file changed, 36 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
-+++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
-@@ -74,7 +74,42 @@
- status = "okay";
- /* 8MB of flash */
- reg = <0x30000000 0x00800000>;
-- /* TODO: add flash partitions here */
-+ /*
-+ * Override the RedBoot partition table with fixed partitions
-+ * in order to create a coherent "firmware" partition so that
-+ * we can have optimal flash usage with OpenWrt in a big
-+ * MTD-splitted "firmware" partition.
-+ */
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@0 {
-+ label = "BOOT";
-+ reg = <0x00000000 0x00020000>;
-+ read-only;
-+ };
-+ partition@1 {
-+ compatible = "openwrt,executable-prolog";
-+ label = "firmware";
-+ reg = <0x00020000 0x007a0000>;
-+ };
-+ partition@2 {
-+ label = "VCTL";
-+ reg = <0x007c0000 0x00010000>;
-+ read-only;
-+ };
-+ partition@3 {
-+ label = "cfg";
-+ reg = <0x007d0000 0x00020000>;
-+ read-only;
-+ };
-+ partition@4 {
-+ label = "FIS directory";
-+ reg = <0x007f0000 0x00010000>;
-+ read-only;
-+ };
-+ };
- };
-
- syscon: syscon@40000000 {
projects / thirdparty / openwrt.git / commitdiff
