CHANGES WITH 231:
- * When using systemd's default tmp.mount for /tmp, this will now be
- mounted with the "nosuid" and "nodev" options. This avoids
- privilege escalation attacks that put traps and exploits into /tmp.
- However, this might cause some problems if you e. g. put container
+ * In service units the various ExecXYZ= settings have been extended
+ with an additional special character as first argument of the
+ assigned value: if the character '!' is used the specified command
+ line it will be run with full privileges, regardless of User=,
+ Group=, CapabilityBoundingSet= and similar options. The effect is
+ similar to the existing PermissionsStartOnly= option, but allows
+ configuration of this concept for each executed command line
+ independently.
+
+ * Services may now alter the service watchdog timeout at runtime by
+ sending a WATCHDOG_USEC= message via sd_notify().
+
+ * MemoryLimit= and related unit settings now optionally take percentage
+ specifications. The percentage is taken relative to the amount of
+ physical memory in the system (or in case of containers, the assigned
+ amount of memory). This allows scaling service resources neatly with
+ the amount of RAM available on the system. Similar, systemd-logind's
+ RuntimeDirectorySize= option now also optionally takes percentage
+ values.
+
+ * In similar fashion TasksMax= takes percentage values now, too. The
+ value is taken relative to the configured maximum number of processes
+ on the system. The per-service task maximum has been changed to 15%
+ using this functionality. (Effectively this is an increase of 512 →
+ 4915 for service units, given the kernel's default pid_max setting.)
+
+ * Calendar time specifications in .timer units now understand a ".."
+ syntax for time ranges. Example: "4..7:10" may now be used for
+ defining a timer that is triggered at 4:10am, 5:10am, 6:10am and
+ 7:10am every day.
+
+ * The InaccessableDirectories=, ReadOnlyDirectories= and
+ ReadWriteDirectories= unit file settings have been renamed to
+ InaccessablePaths=, ReadOnlyPaths= and ReadWritePaths= and may now be
+ applied to all kinds of file nodes, and not just directories, with
+ the exception of symlinks. Specifically these settings may now be
+ used on block and character device nodes, UNIX sockets and FIFOS as
+ well as regular files. The old names of these settings remain
+ available for compatibility.
+
+ * systemd will now log about all service processes it kills forcibly
+ (using SIGKILL) because they remained after the clean shutdown phase
+ of the service completed. This should help identifying services that
+ shut down uncleanly. Moreover if KillUserProcesses= is enabled in
+ systemd-logind's configuration a similar log message is generated for
+ processes killed at the end of each session due to this setting.
+
+ * systemd will now set the $JOURNAL_STREAM environment variable for all
+ services whose stdout/stderr are connected to the Journal (which
+ effectively means by default: all services). The variable contains
+ the device and inode number of the file descriptor used for
+ stdout/stderr. This may be used by invoked programs to detect whether
+ their stdout/stderr is connected to the Journal, in which case they
+ can switch over to direct Journal communication, thus being able to
+ pass extended, structured metadata along with their log messages. As
+ one example, this is now used by glib's logging primitives.
+
+ * When using systemd's default tmp.mount unit for /tmp, the mount point
+ will now be established with the "nosuid" and "nodev" options. This
+ avoids privilege escalation attacks that put traps and exploits into
+ /tmp. However, this might cause problems if you e. g. put container
images or overlays into /tmp; if you need this, override tmp.mount's
"Options=" with a drop-in, or mount /tmp from /etc/fstab with your
desired options.
- * systemd-resolved gained a new "Cache=" option in resolved.conf.
- Local caching makes DNS poisoning attacks slightly easier and allows
- a local user to detect whether any other user on the same machine has
- recently visited a given DNS name (privacy). If that is a concern,
- you can disable local caching with this option at the cost of slower
- DNS resolution (which is particularly expensive with DNSSEC). The
- default continues to be "yes" (i. e. caching is enabled).
-
- Contributions from: ...
+ * systemd now supports the "memory" cgroup controller also on
+ cgroupsv2.
+
+ * The systemd-cgtop tool now optionally takes a control group path as
+ command line argument. If specified, the control group list shown is
+ limited to subgroups of that group.
+
+ * The SystemCallFilter= unit file setting gained support for
+ pre-defined, named system call filter sets. For example
+ SystemCallFilter=@clock is now an effective way to make all clock
+ changing-related system calls unavailanle to a service. A number of
+ similar pre-defined groups are defined. Writing system call filters
+ for system services is simplified substantially with this new
+ concept. Accordingly, all of systemd's own, long-running services now
+ enable system call filtering based on this, by default.
+
+ * A new service setting MemoryDenyWriteExecute= has been added, taking
+ a boolean value. If turned on, a service may no longer create memory
+ mappings that are writable and executable at the same time. This
+ enhances security for services where this is enabled as it becomes
+ harder to dynamically write and then execute memory in exploited
+ service processes. This option has been enabled for all of systemd's
+ own long-running services.
+
+ * A new RestrictRealtime= service setting has been added, taking a
+ boolean argument. If set the service's processes may no longer
+ acquire realtime scheduling. This improves security as realtime
+ scheduling may otherwise be used to easily freeze the system.
+
+ * systemd-nspawn gained a new switch --notify-ready= taking a boolean
+ value. This may be used for requesting that the system manager inside
+ of the container reports start-up completion to nspawn which then
+ propagates this notification further to the service manager
+ supervising nspawn itself. A related option NotifyReady= in .nspawn
+ files has been added too. This functionality allows ordering of the
+ start-up of multiple containers using the usual systemd ordering
+ primitives.
+
+ * machinectl gained a new command "stop" that is an alias for
+ "terminate".
+
+ * systemd-resolved gained support for contacting DNS servers on
+ link-local IPv6 addresses.
+
+ * If systemd-resolved receives the SIGUSR2 signal it will now flush all
+ its caches. A method call for requesting the same operation has been
+ added to the bus API too, and is made available via "systemd-resolve
+ --flush-caches".
+
+ * systemd-resolved gained a new --status switch. If passed a brief
+ summary of the used DNS configuration with per-interface information
+ is shown.
+
+ * resolved.conf gained a new Cache= boolean option, defaulting to
+ on. If turned off local DNS caching is disabled. This comes with a
+ performance penalty in particular when DNSSEC is enabled. Note that
+ resolved disables its internaly caching implicitly anyway, when the
+ configured DNS server is on a host-local IP address such as ::1 or
+ 127.0.0.1, thus automatically avoiding double local caching.
+
+ * systemd-resolved now listens on the local IP address 127.0.0.53:53
+ for DNS requests. This improves compatibility with local programs
+ that do not use the libc NSS or systemd-resolved's bus APIs for name
+ resolution. This minimal DNS service is only available to local
+ programs and does not implement the full DNS protocol, but enough to
+ cover local DNS clients. A new, static resolv.conf file, listing just
+ this DNS server is now shipped in /usr/lib/systemd/resolv.conf. It is
+ now recommended to make /etc/resolv.conf a symlink to this file in
+ order to route all DNS lookups to systemd-resolved, regardless if
+ done via NSS, the bus API or raw DNS packets. Note that this local
+ DNS service is not as fully featured as the libc NSS or
+ systemd-resolved's bus APIs. For example, as unicast DNS cannot be
+ used to deliver link-local address information (as this implies
+ sending a local interface index along), LLMNR/mDNS support via this
+ interface is severely restricted. It is thus strongly recommended for
+ all applications to use the libc NSS API or native systemd-resolved
+ bus API instead.
+
+ * systemd-networkd's bridge support learned a new setting
+ VLANFiltering= for controlling VLAN filtering. Moreover a new section
+ in .network files has been added for configuring VLAN bridging in
+ more detail: VLAN=, EgressUntagged=, PVID= in [BridgeVLAN].
+
+ * systemd-networkd's IPv6 Router Advertisement code now makes use of
+ the DNSSL and RDNSS options. This means IPv6 DNS configuration may
+ now be acquired without relying on DHCPv6. Two new options
+ UseDomains= and UseDNS= have been added to configure this behaviour.
+
+ * systemd-networkd's IPv6AcceptRouterAdvertisements= option has been
+ renamed IPv6AcceptRA=, without altering its behaviour. The old
+ setting name remains available for compatibility reasons.
+
+ * The systemd-networkd VTI/VTI6 tunneling support gained new options
+ Key=, InputKey= and OutputKey=.
+
+ * systemd-networkd gained support for VRF ("Virtual Routing Function")
+ interface configuration.
+
+ * "systemctl edit" may now be used to create new unit files by
+ specifying the --force switch.
+
+ * sd-event gained a new function sd_event_get_iteration() for
+ requesting the current iteration counter of the event loop. It starts
+ at zero and is increased by one with each event loop iteration.
+
+ * Configuration for "mkosi" is now part of the systemd
+ repository. mkosi is a tool to easily build legacy-free OS images,
+ and is available on github: https://github.com/systemd/mkosi. If
+ "mkosi" is invoked in the build tree a new raw OS image is generated
+ incorporating the systemd sources currently being worked on and a
+ clean, fresh distribution installation. The generated OS image may be
+ booted up with "systemd-nspawn -b -i", qemu-kvm or on any physcial
+ UEFI PC. This functionality is particularly useful to easily test
+ local changes made to systemd in a pristine, defined environment. See
+ HACKING for details.
+
+ Contributions from: 0xAX, Alessandro Puccetti, Alessio Igor Bogani,
+ Alexander Kuleshov, Alexander Kurtz, Alex Gaynor, Andika Triwidada,
+ Andreas Pokorny, Andreas Rammhold, Andrew Jeddeloh, Ansgar Burchardt,
+ Atrotors, Benjamin Drung, Brian Boylston, Christian Hesse, Christian
+ Rebischke, Daniele Medri, Daniel Mack, Dave Reisner, David Herrmann,
+ David Michael, Djalal Harouni, Doug Christman, Douglas Christman, Elias
+ Probst, Evgeny Vereshchagin, Federico Mena Quintero, Felipe Sateler,
+ Franck Bui, Harald Hoyer, Ian Lee, Ivan Shapovalov, Jakub Wilk, Jan
+ Janssen, Jean-Sébastien Bour, John Paul Adrian Glaubitz, Jouke
+ Witteveen, Kai Ruhnau, kpengboy, Kyle Walker, Lénaïc Huard, Lennart
+ Poettering, Luca Bruno, Lukas Lösche, Lukáš Nykrýn, mahkoh, Marcel
+ Holtmann, Martin Pitt, Marty Plummer, Matthieu Codron, Max Prokhorov,
+ Michael Biebl, Michael Karcher, michaelolbrich, Michał Bartoszkiewicz,
+ Michal Sekletar, Michal Soltys, Minkyung, Muhammet Kara, mulkieran,
+ Otto Wallenius, Pablo Lezaeta Reyes, Peter Hutterer, Ronny Chevalier,
+ Rusty Bird, Stef Walter, Susant Sahani, Tejun Heo, Thomas Blume, Thomas
+ Haller, Thomas Hindoe Paaboel Andersen, Thomas H. P. Andersen, Tobias
+ Jungel, Tom Gundersen, Tom Yan, Topi Miettinen, Torstein Husebø,
+ Valentin Vidić, Viktar Vaŭčkievič, Weng Xuetian, Werner Fink, Zbigniew
+ Jędrzejewski-Szmek
— Somewhere, 2016-XX-XX
projects / thirdparty / systemd.git / commitdiff
