From: Jonas Jelonek Date: Sat, 27 Sep 2025 10:19:24 +0000 (+0000) Subject: dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos X-Git-Tag: v6.18-rc1~27^2~3^2~7 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=0395a5e8fd07645df6743fd2a6883708196d9d75;p=thirdparty%2Flinux.git dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos Fix wording of binding description to use plural because there is not only a single RTL9300 SoC. RTL9300 describes a whole family of Realtek SoCs. Add missing word 'of' in description of reg property. Change 'SDA pin' to 'SDA line number' because the property must contain the SDA (channel) number ranging from 0-7 instead of a real pin number. Signed-off-by: Jonas Jelonek Reviewed-by: Rob Herring (Arm) Reviewed-by: Chris Packham Tested-by: Chris Packham # On RTL9302C based board Tested-by: Markus Stockhausen Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20250927101931.71575-3-jelonek.jonas@gmail.com --- diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml index 69ac5db8b9148..274e2ab8b6128 100644 --- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml @@ -10,7 +10,7 @@ maintainers: - Chris Packham description: - The RTL9300 SoC has two I2C controllers. Each of these has an SCL line (which + RTL9300 SoCs have two I2C controllers. Each of these has an SCL line (which if not-used for SCL can be a GPIO). There are 8 common SDA lines that can be assigned to either I2C controller. @@ -27,7 +27,7 @@ properties: reg: items: - - description: Register offset and size this I2C controller. + - description: Register offset and size of this I2C controller. "#address-cells": const: 1 @@ -42,7 +42,7 @@ patternProperties: properties: reg: - description: The SDA pin associated with the I2C bus. + description: The SDA line number associated with the I2C bus. maxItems: 1 required: