From: Andy Yan Date: Fri, 22 Aug 2025 06:39:54 +0000 (+0800) Subject: arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX X-Git-Tag: v6.18-rc1~147^2~47^2 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=07c53a9e970712b1a479dd0ec4adfe184482c22f;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX The HDMI0(Port next to Headphone Jack) is driven by DP1 on rk3588 via RA620(a dp2hdmi converter). Add related dt nodes to enable it. Note: ROCKCHIP_VOP2_EP_DP1 is defined as 11 in dt-binding header, but it will trigger a dtc warning like "graph node unit address error, expected "b"" if we use it directly after endpoint, so we use "b" instead here. Signed-off-by: Andy Yan Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20250822063959.692098-11-andyshrk@163.com Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts index 7de17117df7ae..bc8140883de47 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts @@ -57,6 +57,31 @@ "Headphone", "Headphones"; }; + bridge { + compatible = "radxa,ra620"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_in: endpoint { + remote-endpoint = <&dp1_out_con>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_out: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -73,6 +98,17 @@ }; }; + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_bridge_out>; + }; + }; + }; + hdmi1-con { compatible = "hdmi-connector"; type = "a"; @@ -268,6 +304,24 @@ cpu-supply = <&vdd_cpu_lit_s0>; }; +&dp1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp1m0_pins>; +}; + +&dp1_in { + dp1_in_vp2: endpoint { + remote-endpoint = <&vp2_out_dp1>; + }; +}; + +&dp1_out { + dp1_out_con: endpoint { + remote-endpoint = <&hdmi_bridge_in>; + }; +}; + &gpu { mali-supply = <&vdd_gpu_s0>; status = "okay"; @@ -1261,3 +1315,10 @@ remote-endpoint = <&hdmi1_in_vp1>; }; }; + +&vp2 { + vp2_out_dp1: endpoint@b { + reg = ; + remote-endpoint = <&dp1_in_vp2>; + }; +};