From: Ioana Ciornei Date: Tue, 25 Oct 2022 14:41:17 +0000 (+0300) Subject: arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers X-Git-Tag: v6.0.8~90 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=0a373d909de0737ca78d9e6a2ccb35c2efe9bc73;p=thirdparty%2Fkernel%2Fstable.git arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers [ Upstream commit d5c921a53c80dfa942f6dff36253db5a50775a5f ] Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes") Signed-off-by: Ioana Ciornei Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index d76f1c42f3fa5..7bb33933c2cb2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -533,6 +533,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -542,6 +545,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };